VLED15-120-1250

Additional Resources:    Product Page 

**date** 09/16/2013 **page** 1 of 5 

## **SERIES:** VLED15 **DESCRIPTION:** LED DRIVER **│** 

## **FEATURES** 

- constant current 

- high efficiency 

- 90~135 Vac and 176~265 Vac input range available 

- 0.35~1.5 A output current 

- operates with industry standard dimmers 

- compact encapsulated assembly 

- active power factor correction 

- over voltage, over current, over temperature protection max., short circuit protection: auto recovery 

- high temperature operation (up to 90°C case) 

- UL approved, ENEC approved, CE Mark 

- long life > 50,000 hours 

## RoHS ~~—~~ cWAkus 

|**MODEL**<br>**output voltage1**<br>**output current**<br>**output wattage**<br>**effi ciency**<br>**min**<br>(Vdc)<br>**max**<br>(Vdc)<br>**min**<br>(mA)<br>**max**<br>(mA)<br>**max**<br>(W)<br>**max**<br>(%)<br>VLED15-120-350<br>24<br>48<br>0<br>350<br>16.8<br>80<br>VLED15-120-480<br>10<br>13.5<br>0<br>480<br>6.5<br>80<br>VLED15-120-600<br>8<br>12<br>0<br>600<br>7.2<br>80<br>VLED15-120-700<br>16<br>24<br>0<br>700<br>16.8<br>80<br>VLED15-120-800<br>8<br>12<br>0<br>800<br>9.6<br>80<br>VLED15-120-900<br>10<br>16<br>0<br>900<br>14.4<br>80<br>VLED15-120-900L<br>8<br>12<br>0<br>900<br>10.8<br>80<br>VLED15-120-1000<br>10<br>16<br>0<br>1,000<br>16<br>80<br>VLED15-120-1200<br>10<br>14.1<br>0<br>1,200<br>16.92<br>80<br>VLED15-120-1250<br>8<br>12<br>0<br>1,250<br>15<br>80<br>VLED15-120-14002<br>8<br>11.5<br>0<br>1,400<br>16.1<br>80<br>VLED15-120-1500<br>5<br>10<br>0<br>1,500<br>15<br>80<br>VLED15-230-350<br>24<br>48<br>0<br>350<br>16.8<br>80<br>VLED15-230-480<br>10<br>13.5<br>0<br>480<br>6.5<br>80<br>VLED15-230-600<br>8<br>12<br>0<br>600<br>7.2<br>80<br>VLED15-230-700<br>16<br>24<br>0<br>700<br>16.8<br>80<br>VLED15-230-800<br>8<br>12<br>0<br>800<br>9.6<br>80<br>VLED15-230-900<br>10<br>16<br>0<br>900<br>14.4<br>80<br>VLED15-230-900L<br>8<br>12<br>0<br>900<br>10.8<br>80<br>VLED15-230-1000<br>10<br>16<br>0<br>1,000<br>16<br>80<br>VLED15-230-1200<br>10<br>14.1<br>0<br>1,200<br>16.92<br>80<br>VLED15-230-1250<br>8<br>12<br>0<br>1,250<br>15<br>80<br>VLED15-230-14002<br>8<br>11.5<br>0<br>1,400<br>16.1<br>80<br>VLED15-230-1500<br>5<br>10<br>0<br>1,500<br>15<br>80<br>DISCONTINUED|
|---|



Note: 1. Total LED forward voltage must be within these ratings under all conditions including dimming 

2. 80°C maximum case rating 

3. Ripple Current: <40% (p-p) of maximum Output Current with no dimming 

**cui** .com 

Additional Resources:    Product Page 

**CUI Inc │ SERIES:** VLED15 **│ DESCRIPTION:** LED DRIVER 

**date** 09/16/2013 **│ page** 2 of 5 

## **PART NUMBER KEY** 

## **- - VLED15 XXX XXXX** 

|Input Voltage<br>120 = 120 Vac<br>230 = 230 Vac<br>Output Current<br>(in mA)<br>Base Number<br>**INPUT**<br>**parameter**<br>**conditions/description**<br>**min**<br>**typ**<br>**max**<br>**units**<br>voltage<br>90<br>176<br>135<br>265<br>Vac<br>Vac<br>frequency<br>47<br>63<br>Hz<br>input current<br>at 115 Vac<br>0.22<br>A<br>inrush current<br>at 25°C<br>5<br>A<br>power factor<br>at 120 Vac<br>90<br>%<br>**OUTPUT**<br>**parameter**<br>**conditions/description**<br>**min**<br>**typ**<br>**max**<br>**units**<br>voltage accuracy<br>of set point<br>±5<br>%<br>load regulation<br>±5<br>%<br>**PROTECTION**<br>**parameter**<br>**conditions/description**<br>over voltage protection<br>auto restart<br>over current protection<br>auto restart<br>short circuit protection<br>auto restart<br>control<br>output dims without any f icker<br>dimming range<br>(conduction angle/output)<br>use with incandescent dimmer<br>30<br>147<br>degrees<br>over temperature protection<br>auto restart<br>**SAFETY & COMPLIANCE**<br>**parameter**<br>**conditions/description**<br>**min**<br>**typ**<br>**max**<br>**units**<br>isolation<br>meets the UL 60950-1 reinforced, double insulation NEC (Class 2) EN 60598-1 class II<br>safety approvals<br>UL 60950-1, LPS, UL 8750, EN61347-2-13<br>EMI/EMC<br>EN 55015 class B, FCC class 47 CFR part 15 class B, EN 61000-4-(2,3,4,5,6,11), IEC 61000-3-(2,3)<br>ANSI c62.41-1991 category A1, 2.5 kV Ringwave<br>harmonics<br>meets EN 61000-3-(2,3)<br>leakage current<br>at 120 Vac<br>0.25<br>mA<br>RoHS compliant<br>yes<br>**ENVIRONMENTAL**<br>**parameter**<br>**conditions/description**<br>**min**<br>**typ**<br>**max**<br>**units**<br>operating temperature<br>-30<br>90<br>°C<br>DISCONTINUE|
|---|
|storage temperature<br>-40<br>95<br>°C|
|operating humidity<br>non-condensing<br>5<br>95<br>%|
|surface temperature<br>exposed surfaces, under all operating conditions<br>90<br>°C|



**cui** .com 

Additional Resources:    Product Page 

**CUI Inc │ SERIES:** VLED15 **│ DESCRIPTION:** LED DRIVER 

**date** 09/16/2013 **│ page** 3 of 5 

## **MECHANICAL** 

**==> picture [547 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
parameter conditions/description min typ max units<br>dimensions 82 x 56 x 29 (3.21 x 2.21 x 1.13 inch) mm<br>145 g<br>weight<br>5.1 oz<br>**----- End of picture text -----**<br>


## **MECHANICAL DRAWING** 

units: mm tolerance: ±0.3 mm unless otherwise specifi ed 

**==> picture [478 x 277] intentionally omitted <==**

**----- Start of picture text -----**<br>
56.22 2.213<br>81.62 3.213 SCALE: 1:2<br>152.00 5.984<br>(2 PLCS)  5.00<br>9.50 0.374<br>(2 PLCS)<br>**----- End of picture text -----**<br>


**cui** .com 

Additional Resources:    Product Page 

**CUI Inc │ SERIES:** VLED15 **│ DESCRIPTION:** LED DRIVER 

**date** 09/16/2013 **│ page** 4 of 5 

## **DIMMING REQUIREMENTS** 

Dimming of the driver shall be possible with standard triac based incandescent dimmers that chops the AC voltage as shown below or with Electronic Low Voltage dimmers that employ reverse phase control. 

**==> picture [84 x 78] intentionally omitted <==**

**----- Start of picture text -----**<br>
Chopped AC Input to Driver<br>AC Wall Power<br>**----- End of picture text -----**<br>


During the rapid rise time of the AC voltage when the dimmer turns on, the driver shall not generate any voltage or current oscillations and inrush current shall be controlled. During the on time of the AC input, the driver shall regulate the output. The RMS value of the driver output current shall be proportional to the on time of the AC input voltage. Care must be taken to assure that the minimum load requirements are met. Multiple drivers/LEDs may be connected to the dimmer in order to meet the minimum load requirement. 

## **DIMMING RANGE** 

When operating with an incandescent dimmer, the RMS output current shall vary depending upon the conduction angle and RMS value of the applied AC input voltage. The following graph shows the typical output versus conduction angle at various line voltages. 

**==> picture [304 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Io vs Conduc�on Angle<br>1.2<br>1<br>100V (200V)<br>0.8<br>115V (230V)<br>0.6 132V (264V)<br>0.4<br>0.2<br>0<br>0 20 40 60 80 100 120 140 160<br>VAC Conduc�on Angle (Degrees)<br>Output Current (A) Normalized to I Set<br>**----- End of picture text -----**<br>


throughout this dimming range shall be monotonic and produce a smooth transition of light output in both directions of the dimming range. At 120 Vac or 240 Vac input, the driver shall achieve full rated output current at less than 147 degree conduction angle. 

**cui** .com 

Additional Resources:    Product Page 

**CUI Inc │ SERIES:** VLED15 **│ DESCRIPTION:** LED DRIVER 

**date** 09/16/2013 **│ page** 5 of 5 

## **REVISION HISTORY** 

|**rev.**<br>|**description**<br>|**date**<br>|
|---|---|---|
|1.0<br>|initial release<br>|07/29/2010<br>|
|1.01<br>|model update and added dimensions<br>|03/21/2011<br>|
|1.02<br>|applied new spec template<br>|02/15/2012<br>|
|1.03<br>|updated input voltage<br>|04/24/2012<br>|
|1.04<br>|new template applied<br>|07/18/2012<br>|
|1.05<br>|corrected output current units<br>|09/16/2013<br>|



The revision history provided is for informational purposes only and is believed to be accurate. 

**Headquarters** 20050 SW 112th Ave. Fax 503.612.2383 Tualatin, OR 97062 **cui** .com **800.275.4899** techsupport@cui.com 

CUI offers a one (1) year limited warranty.  Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice.  Information provided by CUI is believed to be accurate and reliable.  However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. 

CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability.  A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.