Image not available
Illustrative purposes only
SRPE-06E1A0GE
Non Isolated POL DC/DC Converter, ITE, Module, 33 W, 600 mV, 5.5 V, 6 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: BEL POWER SOLUTIONS
- Product type: DC / DC Non Isolated Board Mount Converters - Adjustable Output
- Output Power Max:33W; Output Voltage Min:600mV; Output Voltage Max:5.5V; Output Current Max:6A; DC / DC Converter Output Type:Adjustable; DC / DC Converter Type:Module; Input Voltage DC
- SVHC: To Be Advised
- Depth: 10.41mm
- Width: 8.6mm
- Height: 16.51mm
- Product Range: SRPE Series
- Output Power Max: 33W
- Output Current Max: 6A
- Output Voltage Max: 5.5V
- Output Voltage Min: 600mV
- Input Voltage DC Max: 13.2V
- Input Voltage DC Min: 5.5V
- DC / DC Converter Type: Module
- Power Supply Applications: ITE
- DC / DC Converter Output Type: Adjustable
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 17.81 € |
| Current stock | 25+ |
| Lead time | 30 days |
Datasheet
The Bel SRPE-06E1A0 is part of the non-isolated dc/dc converter Power Module series. The modules use a SIP package. These converters are available in a range of output voltages from 0.6 VDC to 5.5 VDC over a wide range of input voltage (VIN = 5.5 - 13.2 VDC). The efficiency is typically 91% at 3.3 Vout (Vin = 12 VDC) at full load. - 5.5 VDC – 13.2 VDC Input - 0.6 VDC – 5.5 VDC /6 A Output - Non-Isolated - Under-Voltage Lockout - • High Efficiency - Wide Trim - Fixed Frequency - OCP/SCP - Low Cost - Remote On/Off - Wide Input - Class II, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592B) - Networking - Applications • Computers and Peripherals • Telecommunications **==> picture [58 x 40] intentionally omitted <==** **----- Start of picture text -----**<br> re:es<br>**----- End of picture text -----**<br> SRPE-06E1A0 Series 2 |**OUTPUT**<br>**VOLTAGE**|**INPUT VOLTAGE**|**INPUT VOLTAGE**<br>**MAX. OUTPUT**<br>**CURRENT**|**MAX. OUTPUT**<br>**POWER**|**TYPICAL**<br>**EFFICIENCY**|**MODEL NUMBER**| |---|---|---|---|---|---| |0.6 V - 5.5 V|5.5 V - 13.2 V|6 A|33 W|91%|SRPE-06E1A0| **NOTE:** 1. Add “G” or “R” suffix at the end of the model numbers for package. |**S**<br>**R**<br>**PE**<br>**-**<br>**06**<br>**E**<br>**1A**<br>**0**<br>**x**<br>Mounting type<br>RoHS Status<br>Series<br>name<br>Output<br>current<br>Input range<br>Output<br>voltage<br>Active logic and<br>HSK feature<br>Package type<br>Surface mount<br>RoHS 6<br>SMD SIP<br>6A<br>5.5-13.2V<br>0.6-5.5V<br>active high,<br>without HSK<br>G – Tray<br>R – Tape and<br>Reel<br>~~a~~<br>a<br>ee<br>~~ee~~| |---| |**PARAMETER**|**DESCRIPTION**|**MIN**|**TYP**|**MAX**|**UNITS**| |---|---|---|---|---|---| |Input Supply Voltage||-0.3|-|15|V| |Remote On/Off||-0.3|-|15|V| |Ambient Temperature||0|-|50|C| |Storage Temperature||-55|-|125|C| |Altitude||-|-|2000|m| **NOTE:** All specifications are typical at 25 C unless otherwise stated. |**PARAMETER**|**DESCRIPTION**|**MIN**|**TYP**|**MAX**|**UNIT**| |---|---|---|---|---|---| |Input Voltage||5.5|-|13.2|V| |Input Current (full load)|This power module is not internally fused. An<br>input line fuse must always be used|-|-|4.9|A| |Input Current (no load)||-|50|150|mA| |Remote Off Input Current||-|1|5|mA| |Input Reflected Ripple Current<br>(rms)|With simulated source impedance of 1000nH,<br>5Hz to 20MHz. Use a 1000µF/25V AL-Cap with|-|7|20|mA| |Input Reflected Ripple Current<br>(pk-pk)|ESR=0.03 ohm max and 2*100µF/25V Tan cap<br>with ESR=0.013 ohm max, at 100KHz@25°C.|-|22|40|mA| |I2t Inrush Current Transient||-|-|1|A2s| |Turn-on Voltage Threshold||4.15|4.2|4.45|V| |Turn-off Voltage Threshold||3.7|4|4.2|V| **NOTE:** All specifications are typical at 25 C unless otherwise stated. tech.support@psbel.com 3 ## SRPE-06E1A0 Series |**PARAMETER**||**DESCRIPTION**|**MIN**|**TYP**|**MAX**|**UNIT**| |---|---|---|---|---|---|---| |Output Voltage<br>Set Point<br>Vo, set≥0.9VDC<br>Vo, set＜0.9VDC|Setpoint test condition: Vin=12V, Iout=half load,<br>Ta=25°C||-2<br>-3|-<br>-|2<br>3|%Vo,set| |Load<br>regulation<br>Vo≥3.3 VDC<br>Vo＜3.3VDC|Vin=12V, Io=0-6A, Ta=25°C .|Vin=12V, Io=0-6A, Ta=25°C .|-2<br>-40|-|2<br>40|%Vo,set<br>mV| |Line<br>Vo≥3.3 VDC|Vin=8-13.2V, Io=3A, Ta=25°C .||-1.5|-|1.5|%Vo,set| |Regulation<br>Vo＜3.3VDC|Vin=5.5-13.2V, Io=3A, Ta=25°C .||-15||15|mV| |Regulation Over Temperature|Regulation Over Temperature||-|0.8|-|%Vo,set| |Output Ripple and Noise (pk-pk)|0-20MHz BW, with 360µF ceramic capacitor at||-|60|200|mV| |Output Ripple and Noise(rms)|output.||-|15|80|mV| |Output Current Range|||0|-|6|A| |Output DC Current Limit|||7|-|10|A| |Output Short-Circuit Current<br>(Vo≤20mV )(Hiccup Mode)|||-|-|4|ADC| |Rise time|||-|2|2.5|ms| |Turn On Time|||-|2.9|5|ms| |Overshoot at Turn on|||-|0|4.5|%| |Output Capacitance|||200|-|2000|µF| |**PARAMETER**|**PARAMETER**|**DESCRIPTION**|**MIN**|**TYP**|**MAX**|**UNIT**| |---|---|---|---|---|---|---| |**TRANSIENT RESPONSE**|**TRANSIENT RESPONSE**|||||| |△V50% ~|Overshoot||-|40|80|mV| |100% Max<br>Load|Settling Time|di/dt=0.25A/µs, Vin=12VDC, Ta=25°C, with 360µF|-|80|200|µs| |△V 100% ~|Overshoot|ceramic capacitor at output.|-|40|80|mV| |50% Max<br>Load|Settling Time||-|80|200|µs| **NOTE** : All specifications are typical at nominal input, full load at 25°C unless otherwise stated. |**PARAMETER**||**DESCRIPTION**|**MIN**||**TYP**|**MAX**|**UNIT**| |---|---|---|---|---|---|---|---| |Switching Frequency|||-||650|-|kHz| ||5.5 V||92.2||94.2||| |Efficiency|3.3 V||9.||91.6||%| ||0.6 V||69||71||| |Output Voltage Trim Range(Wide Trim)||Output Voltage Trim Range(Wide Trim)<br>This voltage is achieved by trimming<br>up output slowly.|0.6||-|5.5|V| |||Calculated Telcordia SR-332, Issue 2|||||| |FIT||(Vin=12 V, Vo=5.5V, Io=6A, Ta = 40C,<br>no forced air, 90% confidence Level|-||17|-|-| |||FIT=109/MTBF)|||||| |Weight|||-||2.5|-|g| |Dimensions (L × W ×H)|||0.41 x 0.65 x 0.339<br>10.41 x 16.51 x 8.60||||inch<br>mm| **NOTE** : All specifications are typical at nominal input, full load at 25°C unless otherwise stated. **==> picture [205 x 38] intentionally omitted <==** **----- Start of picture text -----**<br> HOReee belPROTECTIONSOLUTIONSPOWER &<br>**----- End of picture text -----**<br> **Asia-Pacific Europe, Middle East North America** +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2017 Bel Power Solutions & Protection Rev. J1 SRPE-06E1A0 Series 4 |**PARAMETER**||**DESCRIPTION**|**MIN**|**TYP**|**MAX**|**UNIT**| |---|---|---|---|---|---|---| |Signal Low (Unit On)<br>Signal High (Unit Off)|Active High|The remote on/off pin open, Unit off.|-0.3<br>2.4|-<br>-|0.8<br>18|V<br>V| ## **Recommended remote on/off circuit for active high** **==> picture [379 x 88] intentionally omitted <==** **----- Start of picture text -----**<br> Vin+<br>On/offVin- ave On‘ottVine<br> Control with photocoupler circuit<br>**----- End of picture text -----**<br> **==> picture [315 x 12] intentionally omitted <==** **----- Start of picture text -----**<br> Control with logic circuit<br> Permanently off<br>**----- End of picture text -----**<br> **==> picture [343 x 156] intentionally omitted <==** **----- Start of picture text -----**<br> Efficiency vs. Output Current at Room Temperature<br>0.9<br>[ed<br>0.8<br>ae<br>0.7 _a ——See eee<br>0.6<br>A<br>0.5<br>5.5V<br>e e<br>0.4 12.0V<br>ee == 13.2V<br>0.3<br>0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6<br>OUTPUT CURRENT (Amp)<br>EFFICIENCY (%)<br>**----- End of picture text -----**<br> Figure 1. Vout = 0.6 V ## Oe:eee bel SOLUTIONSPOWER & tech.support@psbel.com SRPE-06E1A0 Series 5 **==> picture [332 x 377] intentionally omitted <==** **----- Start of picture text -----**<br> Efficiency vs. Output Current at Room Temperature<br>1<br>0.95<br>0.9<br>0.85<br>0.8<br>0.75<br>0.7<br>0.65 o a 6V12.0V<br>Po 13.2V<br>0.6<br>0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6<br>OUTPUT CURRENT (Amp)<br>Figure 2. Vout = 3.3 V<br>Efficiency vs. Output Current at Room Temperature<br>1<br>0.95<br>0.9<br>0.85<br>0.8<br>0.75<br>8V<br>e e<br>0.7 12.0V<br>Po 13.2V<br>0.65<br>0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6<br>OUTPUT CURRENT (Amp)<br>EFFICIENCY (%)<br>EFFICIENCY (%)<br>**----- End of picture text -----**<br> Figure 3. Vout = 5.5 V **Asia-Pacific Europe, Middle East North America** +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2017 Bel Power Solutions & Protection Rev. J1 SRPE-06E1A0 Series 6 ## **Trim up circuit (using an external resistor)** **==> picture [423 x 79] intentionally omitted <==** **----- Start of picture text -----**<br> 1.2<br>Module Trim Rtrim —_ k <br><br>Vo 0.6<br>GND § 7<br>SRPE-06E1A0 Trim up Resistor Calculate Vo is the desired output voltage<br>Rtrim is the required resistance between TRIM and GND<br>**----- End of picture text -----**<br> Vin=12V, with maximum junction temperature of semiconductors derated to 115 ˚C. **==> picture [51 x 36] intentionally omitted <==** **----- Start of picture text -----**<br> Ages .<br>Pest sete pt,<br>Fe:<br>**----- End of picture text -----**<br> tech.support@psbel.com 7 ## SRPE-06E1A0 Series Figure 4. Vout = 0.6 V Figure 5. Vout = 1.8 V Figure 6. Vout = 3.3 V Figure 7. Vout = 5.5 V Figure 8. Ripple and noise at full load, 12V input, 0.6V output and Ta=25 ˚C Figure 9. Ripple and noise at full load, 12V input, 3.3V output and Ta=25 ˚C **==> picture [48 x 17] intentionally omitted <==** **----- Start of picture text -----**<br> EES<br>**----- End of picture text -----**<br> **Asia-Pacific Europe, Middle East North America** +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2017 Bel Power Solutions & Protection Rev. J1 SRPE-06E1A0 Series 8 Figure 10. Ripple and noise at full load, 12V input, 5.5V output and Ta=25 ˚C **NOTE:** Test condition of the output ripple and noise: 0-20MHz BW, with 360µF ceramic cap at output ## 11. TRANSIENT RESPONSE WAVEFORMS Figure 11. 100%-50% Load Transients at Vin=12V, Vout=0.6V@Ta=25℃ thy[4.00000us] | 13:50:34 Figure 12. 50%-100% Load Transients at Vin=12V, Vout=0.6V@Ta=25℃ Figure 13. 100%-50% Load Transients at Vin=12V, Vout=3.3V@Ta=25℃ Figure 14. 50%-100% Load Transients at Vin=12V, Vout=3.3V@Ta=25℃ **==> picture [51 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ct © =<br>**----- End of picture text -----**<br> tech.support@psbel.com 9 ## SRPE-06E1A0 Series Figure 15. 100%-50% Load Transients at Vin=12V, Figure 16. 50%-100% Load Transients at Vin=12V, Vout=5.5V@Ta=25℃ Vout=5.5@Ta=25℃ **NOTE:** Test condition of the transient response: di/dt=0.25A/µS, with 360uF ceramic cap at output. ## 12. INPUT UNDER-VOLTAGE LOCKOUT **==> picture [271 x 164] intentionally omitted <==** **----- Start of picture text -----**<br> Under-voltage Lockout<br>|<br>|<br>|<br>|<br>| Voltage Falling<br>|<br>|<br>| Voltage Rising<br>|<br>|<br>|<br>|<br>V1 V2 Input Voltage (V)<br>Input Current<br>**----- End of picture text -----**<br> V1=4 V V2=4.15 V **Asia-Pacific Europe, Middle East** +86 755 298 85888 +353 61 225 977 **North America** +1 408 785 5200 © 2017 Bel Power Solutions & Protection Rev. J1 SRPE-06E1A0 Series 10 ## 13. SOLDERING INFORMATION The SRPE-06E1A0 modules are designed to be compatible with a reflow soldering **process** . The suggested Pb-free solder paste is Sn/Ag/Cu(SAC). The recommended reflow profile using Sn/Ag/Cu solder is shown in the following. Recommended reflow peak temperature is 245℃ while the part can withstand peak temperature of 260℃ maximum for 10seconds. This profile should be used only as a guideline. Many other factors influence the success of SMT reflow soldering. Since your production environment may differ, please thoroughly review these guidelines with your process engineers. ## 14. MSL RATING The SRPE-06E1A0 modules have a MSL rating of 3. ## 15. STORAGE AND HANDLING The SRPE-06E1A0 modules are designed to be compatible with J-STD-033 Rev: A (Handling, Packing, Shipping and Use of Moisture /Reflow Sensitive surface Mount devices). Moisture barrier bags (MBB) with desiccant are applied. The recommended storage environment and handling procedure is detailed in J-STD-033. ## 16. PRE-BAKING This component has been designed, handled, and packaged ready for Pb-free reflow soldering. If the assembly shop follows J-STD033 guidelines, no pre-bake of this component is required before being reflowed to a PCB. However, if the J-STD-033 guidelines are not followed by the assembler, Bel recommends that the modules should be pre-baked @ 120~125℃ for a minimum of 4 hours (preferably 24 hours) before reflow soldering. **==> picture [204 x 37] intentionally omitted <==** **----- Start of picture text -----**<br> re:aeseesi, bel SOLUTIONSPOWERPROTECTION &<br>**----- End of picture text -----**<br> tech.support@psbel.com 11 ## SRPE-06E1A0 Series ## 17. MECHANICAL OUTLINE **NOTE:** 1) All Pins: Material - Copper Alloy; Finish – 3 micro inches minimum Gold over 50 micro inches minimum Nickel plate. |**PIN**|**FUNCTION**| |---|---| |1|Enable| |2<br>3|Vin<br>GND| |4|Vout| |5|Trim| - 2) Undimensioned components are shown for visual reference only. - 3) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm). **Asia-Pacific Europe, Middle East North America** +86 755 298 85888 +353 61 225 977 +1 408 785 5200 © 2017 Bel Power Solutions & Protection Rev. J1 SRPE-06E1A0 Series 12 ## 18. REVISION HISTORY |**DATE**|**REVISION**|**CHANGES DETAIL**|**APPROVAL**| |---|---|---|---| |2013-8-20|A|First Release|XF JIANG| |||1.Mechanical drawing;|| |||2. Output ripple and noise;|| |||3.Output DC Current Limit;|| |||4.Transient Response;|| |||5.add ROHS logo;|| |||6.Output Voltage Set Point;|| |2014-1-23|B|7.Load Regulation;<br>8.Line Regulation;|XF JIANG| |||9.Output DC Current Limit;|| |||10.Efficiency;|| |||11.Turn on/off Voltage|| |||Threshold;|| |||12.Update on/off description,|| |||add a note for UVLO.|| |2014-4-8|C|Update MD.|XF JIANG| |2014-6-24|D|Update MD.|XF JIANG| |||Update part number|| |2014-7-3|E|explanation, RoHS|XF JIANG| |||compliance，Add MD Note.|| |2014-11-5|F|Update MD.|XF JIANG| |2014-11-18|G|Update General<br>Specifications, TD, MD.|XF JIANG| |||Update Input Specs, Output|| |2015-11-12|H|Specs, General, Efficiency|XF JIANG| |||Data, NR, TR, MD.|| |2015-12-22|I|Update Output Specs.|XF JIANG| |2016-05-12|J|Update Thermal Derating<br>Curves.|XF JIANG| **NUCLEAR AND MEDICAL APPLICATIONS** - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. **TECHNICAL REVISIONS** - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. **==> picture [39 x 30] intentionally omitted <==** **----- Start of picture text -----**<br> attRestRN@<br>**----- End of picture text -----**<br> tech.support@psbel.com
Updated at April 10, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →