Image not available
Illustrative purposes only
PSG90906
Battery, Pack of 5, 3 V, 2032, Lithium, 235 mAh, Pressure Contact, 5
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PRO ELEC
- Product type: Batteries - Non-Rechargeable
- Battery Voltage:3V; Battery Size Code:2032; Battery Technology:Lithium; Battery Capacity:235mAh; Battery Terminals:Pressure Cont; Available until stocks are exhausted Alternative available
- SVHC: No SVHC (23-Jan-2024)
- Weight: 3g
- Pack Quantity: 5
- Product Range: -
- Battery Voltage: 3V
- External Height: 3.2mm
- Battery Capacity: 235mAh
- Battery IEC Code: CR2032
- Battery NEDA Code: 5004LC
- Battery Size Code: 2032
- Battery Terminals: Pressure Contact
- External Diameter: 20mm
- Battery Compliance: -
- Battery Technology: Lithium
- Battery Type / Size: Coin Cell
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 1.23 € |
| Current stock | 25+ |
| Lead time | 30 days |
## 1 . [SCOPE]
**This specification applies to the following 3.0v lithium button cell CR2032 made by**
## 2. [RATINGS]
## **TABLE I:**
|**TABLE I:**|**TABLE I:**||||
|---|---|---|---|---|
|**ITEM**||**UNIT**|**SPECIFICATIONS**|**CONDITIONS**|
|**Nominal voltage**||**V**|**3.0**|**Standard discharge**|
|**Nominal capacity**||**mAh**|**235**|**Standard discharge**|
|**Instantaneous**<br>**short-circuit**<br>**current**||**mA**|≥<br>**300**|**Time**≤**0.5second**|
|**Off-load voltage**||**V**|≥**3.20**|**Unit cell**|
|**Storage temperature**||℃|**0-35**||
|**Standard weight**||**g**|**3.0**|**Unit cell**|
|**Service**<br>**output**|**Initial**|**h**|**200**|**Continuous discharge**<br>**with load 3 k** Ω**,till**<br>**2.0v end-voltage at**<br>**20-25**℃|
||**After**<br>**12**<br>**months**<br>**storage**|**h**|**196**||
|**TABLE II:**|||
|---|---|---|
|**ITEM**|**CONDITIONS**|**CHARACTERISTICS**|
|**Self-discharge**<br>**rate**|**Stored for 12 months at normal**<br>**temperature,**<br>**then**<br>**continuously**<br>**discharged with 15 k**Ω **load till 2.0v**<br>**end-voltage**|**Less than** ≤**2%**|
## **3. [PERFORMANCE AND TEST METHODS]**
**Unless otherwise stated, all the testing is carried out under the condition: environmental temperature,20** ℃ **-25** ℃ **;environmental humidity,65** ± **20%.**
## **4. [SUGGESTIONS AND CAUTIONS]**
## **4.1 Install batteries correctly**
**4.2 Ensure the contact points to be clean and conductive**
**4.3 Do not mix different types, different brands batteries to serve together**
**4.4 Do not heat, recharge the batteries**
**4.5 Do not dispose of the batteries in fire**
**4.6 Keep away form the small children, if swallow promptly see doctor**
**4.7 Pay attention to the producing date**
## **TABLE III:**
|**NO**|**ITEM**|**TEST METHODS**|**STANDARED**|**STANDARED**|
|---|---|---|---|---|
|**1**|**Dimensions**|**Using vernier caliper(accuracy**≥**0.02) while**<br>**avoiding short-circuit**|**Diameter**|**20.0(-0.15)mm**|
||||**Height**|**3.20(-0.20)mm**|
|**2**|**Off-load**<br>**voltage**|**Using**<br>**multimeter(accuracy**<br>≥<br>**0.25%)internal resistance**≥**1M**Ω|≥**3.20V**||
|**3**|**Instantaneous**<br>**Short-circuit**<br>**current**|**Time of short-circuit should be less than**<br>**0.5**<br>**Second and avoid repeated test within half**<br>**An hour**|≥**300mA**||
|**4**|**Appearance**|**Eyeballing**|**Bright ,clean, no rust, no**<br>**leakage, And no flaw**||
|**5**|**Capacity**|**Continuously discharge for 8 hour with**<br>**load**<br>**3k**Ω**,temperature at 20-25**℃**,humidity at**<br>**65**<br>± **20% till 2.0v end-voltage(for fresh**<br>**battery**<br>**only: within 3 months)**|≥**200h**||
|**6**|**Vibration test**|**Put battery on the platform of the**<br>**vibrations**<br>**Machine, start the machine and adjust the**<br>**Frequency form 10 times per minute to 15**<br>**Times per minute. keep it running for an**<br>**hour**|**Characteristics**<br>**keep**<br>**stability**||
|**7**|**Leakage at**<br>**high**<br>**temperature**|**Stored under temperature(45** ℃**)for 30**<br>**days**|**Leakage rate**≤**0.5%**|
|---|---|---|---|
|**8**|**Over**<br>**Discharge**<br>**Test**|**After**<br>**2.0v**<br>**end-voltage,**<br>**continuously**<br>**discharged for 5 hours**|**No leakage allowed**|
## **5** . **[DISCHARGE CHARACTERISTICS]**
## **With load 3.0 k** Ω **(CR2032)**
## **Voltage** ( **V** )
**==> picture [434 x 255] intentionally omitted <==**
**----- Start of picture text -----**<br>
3.40<br> 3.20<br> 3.00<br> 2.80<br> 2.60<br> 2.40<br> 2.20<br> 2.00<br> 0.0 30 60 90 120 150 180 200 220 240 270 300<br>**----- End of picture text -----**<br>
**Time h** ( )
**==> picture [214 x 262] intentionally omitted <==**
**----- Start of picture text -----**<br>
rno-cicc<br>qe<br>hy Hp<br>B20<br>on<br>5 | 33<br>**----- End of picture text -----**<br>
Updated at April 1, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →