Image not available
Illustrative purposes only
PM2-LH10-C1
Photoelectric Sensor, Micro, 8 mm, NPN, 5 VDC to 24 VDC, PM2 Series
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PANASONIC
- Product type:
- SVHC: To Be Advised
- IP Rating: -
- Output Type: NPN Open Collector
- Sensor Type: Micro Photoelectric Sensor
- Light Source: 880nm Infrared LED
- Product Range: PM2 Series
- Qualification: -
- Sensing Method: Reflective
- Connection Method: Cable
- Sensing Range Max: 8mm
- Sensor Output Type: NPN
- Supply Voltage Max: 24VDC
- Supply Voltage Min: 5VDC
- Sensing Distance Max: 8mm
- Supply Voltage DC Max: 24V
- Supply Voltage DC Min: 5V
- Operating Temperature Max: 55°C
- Operating Temperature Min: -10°C
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 49.17 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
Amplifier Built-in Convergent Reflective Micro Photoelectric Sensor **PM2 SERIES** 411 FIBER SENSORS ~~ee~~ LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS ~~=~~ INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS ~~ee~~ STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS ~~—~~ MACHINE VISION SYSTEMS UV CURING SYSTEMS **■** General terms and conditions ............. F-3 Related Information **■** Glossary of terms........................ P.1549~ **==> picture [183 x 65] intentionally omitted <==** **----- Start of picture text -----**<br> ■ Selection guide ............................. P.393~<br>■ General precautions ................... P.1552~<br>Certified<br>**----- End of picture text -----**<br> **panasonic.net/id/pidsx/global** -— ## **Convergent reflection sensing ensures stable detection** Selection Guide U-shaped Convergent Reflective ~~a~~ **PM2** ## **Stable detection by convergent reflective mode** **==> picture [149 x 63] intentionally omitted <==** **----- Start of picture text -----**<br> Stable detection<br>characteristics are<br>obtained since it is<br>convergent reflective Detects an object )<br>type and senses a within the<br>limited area. convergent<br>area<br>**----- End of picture text -----**<br> ## **Hardly affected by background** Even a specular Sensing object background does not affect the sensing performance if the ey sensor is located 30 mm 1.181 in away from it. 30 mm Background 1.181 in However, the specular background should be a plane surface, directly facing the sensor. A spherical or curved background may be detected. | ## **Dark object detectable** Since the sensor is very sensitive, it can detect even a dark object of low reflectivity. **==> picture [69 x 20] intentionally omitted <==** **----- Start of picture text -----**<br> Optimum setting<br>distance is 5 mm 0.197 in<br>approx.<br>**----- End of picture text -----**<br> ## **Minute object detectable** ## **Cable type is also available** Cumbersome soldering is not required. It saves space and improves reliability. With connector 50 mm 1.969 in approx. . ae a S ~~O~~ 25 mm 0.984 in approx. ~~—~~ \ Y A ø0.05 mm ø0.002 in copper wire can be detected at a distance of 5 mm 0.197 in under the optimum condition. 5 mm 0.197 in approx. ae ø0.05 mm ø0.002 in copper wire Cable type Convergent Reflective Micro Photoelectric Sensor **PM2 SERIES** 412 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS ## **APPLICATIONS** **==> picture [166 x 147] intentionally omitted <==** **----- Start of picture text -----**<br> Sensing capacitors in a tray<br>**----- End of picture text -----**<br> **Positioning and passage confirmation of a printed circuit board** **==> picture [138 x 99] intentionally omitted <==** ## **ORDER GUIDE** **==> picture [546 x 337] intentionally omitted <==** **----- Start of picture text -----**<br> SIMPLE<br>Type Appearance Sensing range Model No. Output Output WIRE-SAVINGUNITS<br>operation<br>WIRE-SAVING<br>SYSTEMS<br>PM2-LH10 Light-ON MEASURE-<br>MENT<br>SENSORS<br>PM2-LH10B Dark-ON STATIC<br>CONTROL<br>DEVICES<br>PM2-LF10 Light-ON LASERMARKERS<br>PM2-LF10B Dark-ON PLC<br>HUMAN<br>MACHINE<br>PM2-LL10 Light-ON INTERFACES<br>ENERGY<br>MANAGEMENT<br>SOLUTIONS<br>PM2-LL10B Dark-ON<br>2.5 to 8 mm FA<br>0.098 to 0.315 in NPN open-collector transistor COMPONENTS<br>(Convergent point: 5 mm 0.197 in) PM2-LH10-C1 Light-ON MACHINE<br>VISION<br>SYSTEMS<br>UV<br>PM2-LH10B-C1 Dark-ON CURING<br>SYSTEMS<br>PM2-LF10-C1 Light-ON<br>PM2-LF10B-C1 Dark-ON Selection<br>Guide<br>U-shaped<br>PM2-LL10-C1 Light-ON Convergent<br>Reflective<br>PM2-LL10B-C1 Dark-ON<br>PM2<br>Top sensing<br>Front sensing<br>Connector type<br>L type (Top sensing)<br>Top sensing<br>Cable type Front sensing<br>L type (Top sensing)<br>**----- End of picture text -----**<br> ## **OPTIONS** **==> picture [494 x 114] intentionally omitted <==** **----- Start of picture text -----**<br> Connector<br>Designation Model No. Description • CN-13<br>Connector CN-13 Dedicated connector<br>CN-13-C1 0.2 mm [2] 3-core cabtyre cable, 1 m 3.281 ft long<br>Connector Connector attached cable<br>attached cable • CN-13-C1<br>CN-13-C3 0.2 mm [2] 3-core cabtyre cable, 3 m 9.843 ft long • CN-13-C3<br>**----- End of picture text -----**<br> **==> picture [65 x 46] intentionally omitted <==** Convergent Reflective Micro Photoelectric Sensor **PM2 SERIES** 413 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective **PM2** ## **SPECIFICATIONS** **==> picture [503 x 414] intentionally omitted <==** **----- Start of picture text -----**<br> Connector type Cable type<br>Type<br>Top sensing Front sensing L type (Top sensing) Top sensing Front sensing L type (Top sensing)<br>Light-ON PM2-LH10 PM2-LF10 PM2-LL10 PM2-LH10-C1 PM2-LF10-C1 PM2-LL10-C1<br>Item Dark-ON PM2-LH10B PM2-LF10B PM2-LL10B PM2-LH10B-C1 PM2-LF10B-C1 PM2-LL10B-C1<br>CE marking directive compliance EMC Directive, RoHS Directive<br>Sensing range 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) (Note 2)<br>Min. sensing object ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)<br>Hysteresis 20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)<br>Repeatability (perpendicular to sensing axis) 0.08 mm 0.003 in or less (Note 3)<br>Supply voltage 5 to 24 V DC ±10 % Ripple P-P 5 % or less<br>Current consumption Average: 25 mA or less, Peak: 80 mA or less<br>NPN open-collector transistor<br>• Maximum sink current: 100 mA<br>Output • Applied voltage: 30 V DC or less (between output and 0 V)<br>• Residual voltage: 1 V or less (at 100 mA sink current)<br>0.4 V or less (at 16 mA sink current)<br>Utilization category DC-12 or DC-13<br>Overcurrent protection Incorporated<br>Response time 0.8 ms or less<br>Operation indicator Red LED (lights up when the output is ON)<br>Pollution degree 3 (Industrial environment)<br>Ambient temperature –10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +80 °C –13 to +176 °F<br>Ambient humidity 45 to 85 % RH, Storage: 45 to 85 % RH<br>Ambient illuminance Incandescent light: 3,500 ℓx or less at the light-receiving face<br>Vibration resistance 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each<br>Shock resistance 500 m/s [2] acceleration (50 G approx.) in X, Y and Z directions three times each<br>Emitting element Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)<br>Material Enclosure: Polycarbonate, Terminal part: Copper alloy (Ag plated) Enclosure: Polycarbonate, Fixed cable part: PBT<br>Cable – 0.2 mm [2] 3-core cabtyre cable, 1 m 3.281 ft long (Note 4)<br>Total length up to 2 m 6.562 ft is possible with 0.3 mm [2] , or more, cable.<br>Wiring length If the cable is extended for 2 m 6.562 ft, or more, a capacitor –<br>of 10 µF must be connected between +V and 0 V terminals.<br>Net weight: 4.5 g approx. Net weight: 4 g approx. Net weight: 25 g approx<br>Weight Gross weight: 85 g approx. Gross weight: 80 g approx. Gross weight: 330 g approx<br>(10 pcs. package) (10 pcs. package) (10 pcs. package)<br>Model No.<br>Environmental resistance<br>**----- End of picture text -----**<br> - Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation. - 3) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in. - 4) Cable cannot be extended. ## **I/O CIRCUIT AND WIRING DIAGRAMS** ## **I/O circuit diagram** **==> picture [227 x 86] intentionally omitted <==** **----- Start of picture text -----**<br> Color code of cable type and connector attached cable<br>(Brown) +V<br>Z D<br>Load<br>(Black) Output + 5 to 24 V DC<br>100 mA max. – ±10 %<br>Tr (Blue) 0 V<br> Internal circuit Users [‚] circuit<br>Sensor circuit<br>**----- End of picture text -----**<br> Note: Make sure to connect terminals correctly as the sensor does not incorporate a reverse polarity protection circuit. ## **Wiring diagram** **==> picture [239 x 82] intentionally omitted <==** **----- Start of picture text -----**<br> Color code of cable type<br>and connector attached cable<br>Brown<br>+V<br>Load<br>Output Black + 5 to 24 V DC<br>0 V – ±10 %<br>Blue<br>**----- End of picture text -----**<br> Note: Make sure to connect terminals correctly as the sensor does not incorporate a reverse polarity protection circuit. Symbols ... ZD: Surge absorption zener diode Tr: NPN output transistor Convergent Reflective Micro Photoelectric Sensor **PM2 SERIES** 414 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective **PM2** ## **SENSING CHARACTERISTICS (TYPICAL)** ## **Sensing fields** **==> picture [244 x 339] intentionally omitted <==** **----- Start of picture text -----**<br> • Horizontal (left and right) direction<br>The sensors can be mounted<br>0.39410 side by side.<br>However, if the sensor<br>8 is slanted, there may be<br>0.315 White interference.<br>6 Verify first whether there is any<br>0.236 interference prior to use.<br>5<br>0.197<br>0.1574 Horizontal direction<br>N5 15 × 15 mm 0.591 × 0.591 in<br>2 Non-glossy paper<br>0.079<br>0 2 1 0 1 2 ℓ L<br>0.079 0.039 0.039 0.079<br>Left Center Right<br>Operating point ℓ (mm in)<br>Sensor<br>Correlation between lightness and sensing range<br>10<br>0.394 The sensing region (typical)<br>is represented by oblique<br>8<br>0.315 lines in the left figure.<br>However, the sensitivity<br>0.2366 Sensing region should be set with enough<br>0.1975 margin because of slight<br>4 variation in products.<br>0.157<br>2<br>0.079<br>0<br>N2 N4 N6 N8<br>Dark Lightness Light Lightness shown on the left<br>may differ slightly from the<br>N1 N2 N3 N4 N5 N6 N7 N8 N9 actual object condition.<br>)in<br>Setting distance L (mm<br>Distance to convergent point<br>Distance to convergent point<br>)in<br>Sensing range L (mm<br>**----- End of picture text -----**<br> ## **PRECAUTIONS FOR PROPER USE** **==> picture [242 x 372] intentionally omitted <==** **----- Start of picture text -----**<br> • Vertical (up and down) direction<br>The sensors can be mounted<br>0.39410 side by side.<br>However, if the sensor<br>8 is slanted, there may be<br>0.315 White interference.<br>6 Verify first whether there is any<br>0.236 interference prior to use.<br>5<br>0.197<br>0.1574 Vertical direction<br>N5 15 × 15 mm 0.591 × 0.591 in<br>2 Non-glossy paper<br>0.079<br>0 2 1 0 1 2 ℓ L<br>0.079 0.039 0.039 0.079<br>Up Center Down<br>Operating point ℓ (mm in)<br>Sensor<br>Correlation between material (15 × 15 mm 0.591 × 0.591 in) and sensing range<br>20<br>0.787 The bars in the graph<br>indicate the sensing range<br>15 (typical) for the respective<br>0.591 material. However, there<br>is a slight variation in the<br>10 sensing range depending on<br>0.394 the product.<br>Further, if there is a<br>0.1975 reflective object (conveyer,<br>etc.) in the background of<br>the sensing object, since<br>0 it affects the sensing,<br>separate it by more than<br>twice the sensing range<br>shown in the left graph.<br>)in<br>Setting distance L (mm<br>Distance to convergent point<br>)in<br>Sensing range L (mm<br>Mirror Glossy stainless steel Glossy copper plate Distance to convergent point<br>Non-glossy aluminum plate White non-glossy paper White ceramic circuit board Glass epoxy printed circuit board (Green masked surface) Black-painted, non-glossy iron plate Gray non-glossy paper (N5)<br>**----- End of picture text -----**<br> Refer to p.1552~ for general precautions. ## **All models** **==> picture [46 x 83] intentionally omitted <==** - Never use this product as a sensing device for personnel protection. - In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. ## **Mounting** - When fixing the sensor with screws, use M3 screws and the tightening torque should be 0.49 N·m or less. Further, use small, round type plain washers (ø6 mm ø0.236 in). **==> picture [57 x 57] intentionally omitted <==** **----- Start of picture text -----**<br> O +<br>**----- End of picture text -----**<br> **==> picture [164 x 56] intentionally omitted <==** **----- Start of picture text -----**<br> Plain washer<br>(Outer dia: ø6 mm ø0.236 in)<br>Spring washer<br>Purchase separately.<br>M3 screws<br>**----- End of picture text -----**<br> ## **Others** - Do not use during the initial transient time (50 ms) after the power supply is switched on. ## **Wiring** - Make sure to connect terminals correctly as the sensor does not incorporate a reverse polarity protection circuit. - If the sensor is being used in a noisy environment, examine the extent of noise. Further, if equipment, such as motor, solenoid or electromagnetic valve, which generates a large surge, is present near the sensor, connect a surge absorber to the equipment. ## **Setting** **==> picture [229 x 91] intentionally omitted <==** **----- Start of picture text -----**<br> • The optimum setting<br>distance (distance to Sensing<br>convergent point) is object<br>5 mm 0.197 in.<br>The sensor is not affected 5 mm 0.197 in<br>even by a specular<br>30 mm 1.181 in<br>background if it is located Sensor or more<br>30 mm 1.181 in, or more,<br>away from the sensor.<br>Background<br>**----- End of picture text -----**<br> However, the specular background should be a plane surface, directly facing the sensor. A spherical or curved background may be detected. - Take care that the product does not come in direct contact with oil, grease, or organic solvents, such as, thinner, etc. Convergent Reflective Micro Photoelectric Sensor **PM2 SERIES** 415 Refer to p.1552~ for general precautions. FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide U-shaped Convergent Reflective **PM2** ## **PRECAUTIONS FOR PROPER USE** ## **Connector type** ## **Cautions in plugging or unplugging a connector** **==> picture [47 x 71] intentionally omitted <==** - Do not plug or unplug a connector more than 10 times. - Be sure not to give stress more than 5 N to a terminal of both a connector and a sensor. If you do not follow the above cautions, it will cause a poor contact. ## **Procedures of plugging or unplugging a connector** - 1 Insert a connector straight into a Hook sensor until the connector lug is Lug locked by the sensor hook. - 2 When unplugging, give as much 5 N or less stress as a connector lug can be relieved from a hook. Then unplug it. - Caution: Be sure to hold a connector when plugging or unplugging it. Do not hold a terminal or a cable when plugging or unplugging the connector. Otherwise, it will cause a poor contact. **==> picture [87 x 57] intentionally omitted <==** ## **DIMENSIONS (Unit: mm in)** ## **PM2-LH10 PM2-LH10B** Sensor **==> picture [211 x 196] intentionally omitted <==** **----- Start of picture text -----**<br> 10<br>0.394<br>5<br>0.197<br>Sensing surface<br>26<br>1.024<br>20<br>0.787<br>14 8.4<br>0.551 Operation 0.331<br>3.3 indicator (Red) 4<br>0.130 0.157<br>15<br>0.591 17<br>0.669 25<br>0.984<br>15 7.2<br>0.591 0.283<br>1 0.039<br>6<br>0.236<br>3.2 3.2<br>0.126 0.126<br>2-elongated mounting holes<br>**----- End of picture text -----**<br> ## **Soldering (Both connector CN-13 and sensor)** - If soldering is done directly on the terminals, strictly adhere to the conditions given below. **==> picture [240 x 248] intentionally omitted <==** **----- Start of picture text -----**<br> Soldering temperature 260 °C 500 °F or less<br>Soldering time 10 sec. or less<br>Soldering position Refer to the below figure<br>Sensor Connector<br>CN 13 1.5 mm<br>0V OUT+V 0V OUT +V 0.059 in<br>Soldering<br>position<br>Wiring<br>• The cable length must Cable<br>be 2 m 6.562 ft, or<br>less, with 0.3 mm [2] ,<br>or more, cable. If the 10 µF + 5 to 24 V DC<br>cable is extended for more than 2 m 6.562 ft, – ±10 %<br>connect a capacitor of<br>10 µF approx. between<br>+V and 0 V terminals.<br>+ V<br>0V OUT<br>**----- End of picture text -----**<br> The CAD data can be downloaded from our website. ## **PM2-LF10 PM2-LF10B** Sensor **==> picture [211 x 145] intentionally omitted <==** **----- Start of picture text -----**<br> 26<br>1.024 Sensing surface<br>20<br>0.787<br>14 8.4<br>0.551 Operation 0.331<br>3.3 indicator (Red) 4<br>0.130 10 0.157<br>0.394<br>5 4 0.157<br>0. 197<br>15<br>0.591 13<br>0.512 25<br>0.984<br>15 7.2<br>0.591 0.283<br>1 0.039<br>6<br>0.236<br>3.2 3.2<br>0.126 0.126<br>2-elongated mounting holes<br>**----- End of picture text -----**<br> Convergent Reflective Micro Photoelectric Sensor **PM2 SERIES** 416 **==> picture [546 x 479] intentionally omitted <==** **----- Start of picture text -----**<br> DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website. FIBERSENSORS<br>LASER<br>PM2-LL10 PM2-LL10B Sensor * Terminal part (Connector type) SENSORS<br>PHOTO-<br>0.394 10 Sensing surface 0 V OUT +V ELECTRICSENSORS<br>MICRO<br>PHOTO-<br>0.1975 0.331 8.4 14.4 0.567 0.0391 0.0391 ELECTRICSENSORS<br>6 AREA<br>0.236 SENSORS<br>7 0.276 14 4 0.157 11.4 0.0310.8 1.6 2.10.0511.3 t 0.3t 0.012 SAFETY LIGHT CURTAINS /SAFETY<br>0.551 3.3 0.130 0.283 7.2 0.449 0.0632.54 2.540.083 COMPONENTSPRESSURE /<br>10 2 0.079 0.100 0.100 FLOWSENSORS<br>15 0.394<br>0.591 INDUCTIVE<br>PROXIMITY<br>0.984 25 [20 ] 10 SENSORS<br>0.787 0.394 PARTICULAR<br>USE<br>SENSORS<br>Operation indicator (Red)<br>6 2 0.079 SENSOR<br>0.236 2-elongated mounting holes OPTIONS<br>3.2 3.2<br>0.126 0.126 SIMPLE<br>WIRE-SAVING<br>UNITS<br>CN-13 Connector (Optional) PM2-LH10-C1 PM2-LH10B-C1 Sensor<br>WIRE-SAVING<br>SYSTEMS<br>10<br>0.394<br>MEASURE-<br>MENT<br>0.394 10 0.157 4 0.5 0.020 5 0.197 SENSORS<br>STATIC<br>CONTROL<br>Sensing surface DEVICES<br>1<br>0.039 0.433 11 26 LASER<br>1 1 1.024 MARKERS<br>(6) 0.039 0.039 20 14 0.787 8.4<br>(0.236) t 0.2 2-elongated 3.0.130 3 0.551 Operation indicator (Red) 0.331 4 0.157 PLC<br>0.433 11 0.110 2.8 0.197 5 t 0.008 0.063 (2.54)0.0311.60.8 (2.54) mounting holes 0.591 15 0.669 17 25 HUMAN MACHINE INTERFACESENERGY<br>(0.100) (0.100) 15 7.2 0.984 MANAGEMENT SOLUTIONS<br>0.591 0.283<br>1 FA<br>0.039 COMPONENTS<br>3.1<br>0.551 14 0.079 2 3.2 0.126 0.122 MACHINE VISION SYSTEMS<br>ø3.7 1 m 3.281 ftø0.146 long cable, UV CURING<br>SYSTEMS<br>ø5.2<br>ø0.205 7 5.4<br>0.276 0.213<br>12.4<br>0.488<br>**----- End of picture text -----**<br> **==> picture [33 x 13] intentionally omitted <==** **----- Start of picture text -----**<br> Sensor<br>**----- End of picture text -----**<br> ## **PM2-LF10-C1 PM2-LF10B-C1** **==> picture [232 x 185] intentionally omitted <==** **----- Start of picture text -----**<br> 26<br>1.024 Sensing surface<br>20 0.787 Operation<br>14<br>3.30.130 0.5510 1 indicator (Red) 0.331 8.4 4<br>2-elongated 0.394 0.157<br>mounting 5 4 0.157<br>holes 0.197 15<br>0.591 13<br>0.512 [25 ]<br>0.984<br>15 7.2<br>0.591 0.283<br>1<br>0.039<br>3.2 3.1<br>14 2 0.126 0.122<br>0.551 0.079<br>ø3.7 ø0.146 cable,<br>1 m 3.281 ft long<br>ø5.2 5.4<br>ø0.205 7 0.213<br>0.276<br>12.4<br>0.488<br>**----- End of picture text -----**<br> Selection Guide U-shaped Convergent Reflective Reflective **==> picture [281 x 252] intentionally omitted <==** **----- Start of picture text -----**<br> PM2-LL10-C1 PM2-LL10B-C1 Sensor Guide<br>U-shaped<br>Sensing surface 0.394 10 Convergent Reflective<br>5 8.4<br>0.197 0.331 14.4<br>6 0.567 PM2<br>0.236<br>4<br>0.157<br>7 0.276<br>14<br>0.551 11.4<br>3.3 0.449<br>0.130 7.2 2-elongated<br>0.283 mounting<br>2 holes<br>15 10 0.079<br>0.591 0.394<br>25<br>0.984 0.787 20 10<br>0.394<br>Operation indicator (Red)<br>2 3.1<br>14 2 0.079 0.122<br>0.551 0.079<br>3.2<br>0.126<br>ø3.7 ø0.146 cable,<br>1 m 3.281 ft long<br>ø5.2 5.4<br>ø0.205 7 0.213<br>0.276<br>12.4<br>0.488<br>**----- End of picture text -----**<br>
Updated at April 28, 2026
Panasonic Industry is a global leader in the design and manufacture of high-quality electronic components. Renowned for a commitment to continuous innovation, the company provides the essential building blocks that empower modern engineering. From industrial automation to consumer electronics, Panasonic's components are trusted worldwide for their outstanding reliability, efficiency, and long-term performance. The extensive portfolio is anchored by a massive selection of passive components, featuring an industry-leading range of aluminium electrolytic, film, and polymer capacitors. Alongside these advanced capacitance solutions, engineers rely on Panasonic's robust power inductors and a highly versatile array of electromechanical devices, including solid-state, power, and signal relays engineered to excel in demanding environments. Beyond core passives and switching solutions, the offering encompasses critical circuit protection devices such as TVS varistors and NTC thermistors, as well as sophisticated thermal management materials. Panasonic also delivers precision light and motion sensors, highly reliable batteries, and advanced Bluetooth and WLAN connectivity modules, providing a comprehensive ecosystem of components to support next-generation technological design.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →