PGL6189.500HLT

## SMT Power Inductors 

_Power Beads - PGL6189.XXXHLT Series_ 

_**Current Rating:** Over 125Apk_ _**Inductance Range:** 50nH_ _**Height:** 8.0mm Max_ _**Footprint:** 10.0mm x 8.3mm Max_ 

|Part<br>Number|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Inductance1<br>@ 0ADC<br>(nH+/-15%)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Inductance2<br>@Irated<br>(nH TYP)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Irated<br>3<br>(ADC)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>DCR (1-2)<br>(mΩNorminal)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Saturation Current5<br>(A TYP)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Saturation Current5<br>(A TYP)|Heating Current6<br>(A TYP)|
|---|---|---|---|---|---|---|---|
||||||(A TYP)<br>25°C|(A TYP)<br>100°C||
|PGL6189.500HLT|50|50|80|0.04+/-30%|148|120|80|



## **NOTES:** 

1. Inductance measured at 100kHz, 100mVrms. 

   7. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the core loss and temperature rise curves can be used. 

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 3. The rated current as listed is either the saturation current (25°C or 100°C) or the heating current depending on which value is lower. 

4. The nominal DCR is measured at point Z\ 2. , as shown below on the mechanical drawing. 

   8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth (Ko=8.5mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 

5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 

9. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 

**==> picture [539 x 340] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.  The heating current is the DC current which causes the part temperature to increase by<br>approximately 40°C when used in a typical application.  the stated operating temperature range.<br>10.  Sample Value only. Guaranteed by Design and not tested in production<br>Mechanical Schematic<br>PGL6189.XXXHLT 10.0 MAX<br>PGL6189<br>—=  rT .XXXHLT 1<br>8.3 MAX<br>D/C<br>MFG<br>7 O @<br>2<br>8<br>_<br>8.0 MAX<br>d 0.10<br>2 SURFAC ES<br>3.<br>Weight: 2.98grms<br>6.7 REF 10.5 Tape &Reel: 350/ Reel<br>a 6.2 Dimensions: mm<br>4.2 REF Tr ~ | Unless otherwise specified ,<br>fo 4.7 i all tolerances are ± 0.25<br>1 PulseElectronics.com P911.A (09/21)<br>**----- End of picture text -----**<br>


1 py 

P911.A (09/21) 

## SMT Power Inductors 

_Power Beads - PGL6189.XXXHLT Series_ 

## **TAPE & REEL INFO** 

**==> picture [321 x 90] intentionally omitted <==**

**----- Start of picture text -----**<br>
CIRCULAR HOLES<br>PIN 1 INDICATOR SIDE P1<br>SS SSESMSS<br>| SESS<br>mm rend Mie<br>W<br>**----- End of picture text -----**<br>


|**SURFACE MOUNTING TYPE, REEL/TAPE LIST**|**SURFACE MOUNTING TYPE, REEL/TAPE LIST**|**SURFACE MOUNTING TYPE, REEL/TAPE LIST**|
|---|---|---|
|**TYPE**|**REEL SIZE (mm)**|**QTY**|
||**W ± 0.30**<br>**P1 ± 0.1**|**PCS/REEL**|
|**PGL6189.XXXHLT**|24<br>16|350|



## **PGL6189.500HLT, L vs I, Curve** 

**==> picture [384 x 254] intentionally omitted <==**

**----- Start of picture text -----**<br>
60<br>58<br>56<br>54<br>52<br>50<br>48<br>46<br>44<br>42<br>40<br>0 10 20 30 40 50 60 70 80 90 100 110 120 130<br>Current I (A)<br>At 25℃ At 100℃<br>Inductance (nH)<br>**----- End of picture text -----**<br>


P911.A (09/21) 

PulseElectronics.com 

2 

## SMT Power Inductors 

_Power Beads - PGL6189.XXXHLT Series_ 

## **PGL6189.XXXHLT, Core Loss** 

**==> picture [388 x 193] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.2<br>700<br>1.1 DR a KHz<br>1.0 aa 800 500KHz<br>0.9 aee ee KHz ee 600KHz 400KHz |<br>0.8 ee ee ee VA ||<br>300<br>0.7 a a Vaan a A KHz<br>0.6 ea, VA Z|<br>0.5 P| Zo a a<br>0.4 200<br>KHz<br>0.3 P| x e a<br>0.2 | A] 7 |<br>0.1 P| a Pf<br>0.0 a a ee<br>0 200 400 600 800 1000 1200 1400 1600 1800 2000<br>Δ B<br>CoreLoss (W)<br>**----- End of picture text -----**<br>


where Δ B = 0.43* L(nH) * Δ I 

## For More Information: 

**Americas -** prodinfo_power@pulseelectronics.com  | **Europe -** power-apps-europe@pulseelectronics.com  | **Asia -** power-apps-asia@pulseelectronics.com 

Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved. 

3 re 

P911.A (09/21) 

PulseElectronics.com