PELL0482

## **AC to DC Power Supply External Plug In** 

## **Features** 

- 115V/230V AC input 

- 24V DC voltage, 500mA rated current 

- Interchangeable AC heads (UK, EU, US, and AUS) 

- Over-current, over-voltage, and short circuit protection 

- DC cable length of 1.5m, with a 2.1mm DC plug 

- Supplied with AUS, EURO, UK, and US interchangeable heads 

- UK type G, Euro type C, US type A and AUS type I mains plugs 

- Multihead power supply as used in the UK, Europe and many other countries 

## **Input Characteristics** 

## **Input Voltage** 

Rated Input Voltage : 100V AC to 240V AC Input voltage rangee : 90V AC to 264V AC **Input Frequency** Frequency range : 47Hz to 63Hz Rate Frequency : 50/60Hz No-Load power : 0.1W Max 115V/230Vac 

## **Input Current** 

- 0.4A max when input rated voltage and output rated load. 

## **In-rush Current** 

60A mps Max Cold start at 240Vac input ,with rated load and 25°C ambient. 

## **AC Leakage Current** 

- 0.25mA Max. @ 240V AC input 

## **Output Characteristics** 

Rated Output Power : 12W Voltage : +24V Max. Load : 0.5A Load Regulation : 22.8V to 25.2V Unload Output Voltage : 22.8V to 25.2V **Ripple & Noise** Measurement is done by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 47uF electrolysis capacitor. (test under the condition of rated input and rated output) Voltage : +24V Current : 500mA Ripple And Noise (Max) : 200m Vp-p 

## **Efficiency** 

115V AC /230V AC input, output rated load is 25%,50%,75%,100% 4 situations of average efficiency 30DC Note: The rated load is aged for 30 minutes before the DC head is tested. Load Regulation : 100V-240V AC, 

Newark.com/exclusive-brands Farnell.com/exclusive-brands Element14.com/exclusive-brands 

Page <1> 

19/01/26 V1.0 

## **AC to DC Power Supply External Plug In** 

## **Turn On Delay Time** 

5 second Max .At 100Vac input and output Max. Load 

## **Rise Time** 

100ms Max. At 100Vac input and output Max. Load, Output voltage 10%-90% 

## **Hold Up Time** 

5ms Min.at100V AC input and output Max .Load. 

## **Overshoot** 

10% Max. When power supply on or turn off. 

## **Environmental Requirements** 

Operating Temperature : 0°C to +40°C (Full Load, Normal operation) Relative Humidity : 5% (0°C) to 90% (40°C) (Full Load, Normal operation) Storage temperature : -20°C to +70°C Storage Humidity : 20% to 80% 

## **Mechanical Characteristics** 

The drop height of the wall-type product is: the wood floor is 1.2 meter, the fall of 6 faces, each face falls once, can not fall open, the product function and structure are normal, do 25kgf tensile test. 

## **Safety Standard** 

Safety Accord with IEC62368-1, EN62368-1, UL62368-1, GB4943.1, J62368-1. 

Note:  AC pins corresponding corresponding corresponding to national standards, such as the CE that corresponds to EN62368-1. 

## **Dielectric Strength Hi-Pot** 

Primary to secondary, 4000V DC (or 3000V AC) /5mA/3s. 

## **Insulation Resistance** 

Primary to secondary : 100MΩ Min at 500V DC 

## **Derating curve** 

Newark.com/exclusive-brands Farnell.com/exclusive-brands Element14.com/exclusive-brands 

Page <2> 

19/01/26 V1.0 

## **AC to DC Power Supply External Plug In** 

**==> picture [112 x 33] intentionally omitted <==**

## **Diagram** 

**==> picture [200 x 260] intentionally omitted <==**

**==> picture [82 x 62] intentionally omitted <==**

## **Part Number Table** 

|**Part Number Table**||
|---|---|
|**Description**|**Part Number**|
|AC To DC Power Supply, 24V, 0.5A, 12W, 2.1mm Connector|PELL0482|



**Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - ELEC is the registered trademark of Premier Farnell Limited 2019. 

Newark.com/exclusive-brands Farnell.com/exclusive-brands Element14.com/exclusive-brands 

**==> picture [112 x 33] intentionally omitted <==**

Page <3> 

19/01/26 V1.0