OTI-DALI-75/220-240/500-D-NFC-F-L

__ 

## Product datasheet 

## OTi DALI 75/220…240/500 D NFC FL 

OPTOTRONIC Intelligent Flat – DALI (non-isolated) | Linear constant current LED driver – Dimmable 

## Product family features 

- _ Line frequency: 0 Hz | 50 Hz | 60 Hz 

- _ Versatile DALI window driver up to 75 W due to flexible output characteristic 

- _ Supply voltage: 220…240 V 

- _ Available with output current range: up to 500 mA 

- _ DALI-2 certified (Part -101,-102 and -207) 

- _ Monitoring of luminaire operating parameters 

- _ Constant Lumen Output (CLO) 

- _ Non-isolated drivers 

## Product family benefits 

- _ Flat housing (16 mm height) for innovative luminaire designs and applications 

- _ Fully programmable via software (DALI Interface, NFC) 

- _ Advanced luminaire/driver data (power, energy, operating hours…) for analytics 

- _ Prepared for DiiA Specification Parts -251, -252 and -253 

- _ Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) 

- _ High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software) 

- _ Higher quality of light thanks to < 1% output ripple current 

- _ Very high efficiency 

- _ Fulfill safety requirement due to overload, overtemperature, Hot Plug protection 

## Areas of application 

- _ Linear lighting for office, education, industry, storage areas and retail 

- _ Installation in emergency lighting systems according to IEC 61347-2-13, appendix J 

- _ Suitable for luminaires of protection class I 

January 5, 2024, 00:54:02 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. Page 1 of 7 

OTi DALI 75/220…240/500 D NFC FL 

Product datasheet 

__ 

## Technical data 

## **Electrical data** 

|**Electrical data**||
|---|---|
|**Nominal input voltage**|220…240 V|
|**Mains frequency**|0/50/60 Hz|
|**Input voltage AC**|198…264 V|
|**Input voltage DC**|176…276 V|
|**Current set**|DALI / NFC / Programmable|
|**Total harmonic distortion**|5.50 %|
|**Power factor**λ|0.61C…0.99|
|**Efficiency in full-load**|93.5 %1)|
|**Device power loss**|6.0 W|
|**Protective conductor current**|<0.5 mA|
|**Inrush current**|28 A|
|**Max. ECG no. on circuit breaker 10 A (B)**|14|
|**Max. ECG no. on circuit breaker 16 A (B)**|23|
|**Max. ECG no. on circuit breaker 25 A (B)**|-|
|**Surge capability (L/N-Ground)**|2 kV|
|**Surge capability (L-N)**|1 kV|
|**Nominal output voltage**|54…240 V|
|**U-OUT (working voltage)**|< 250 V|
|**Nominal output current**|120…500 mA|
|**Default output current**|125 mA|
|**Output current tolerance**|±3 %|
|**Output ripple current  (100 Hz)**|< 1 %|
|**Output PSTLM**|≤1|
|**Output SVM**|≤0.4|
|**Nominal output power**|6.5…75 W|
|**Maximum output power**|75 W|
|**Galvanic isolation**|Non isolated|
|**Power loss in stand-by mode**|<0.15 W|



1) at 230 V, 50 Hz 

January 5, 2024, 00:54:02 OTi DALI 75/220…240/500 D NFC FL 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. 

Page 2 of 7 

Product datasheet 

Operating Window OTI DALI 75220-240500 D NFC FL 

Typical Efficiency vs. Load (230V50Hz) OTI DALI 75220240500 D NFC FL 

__ 

Typical Power Factor vs. Load OTI DALI 75220-240500 D NFC FL 

Typical THD vs. Load OTI DALI 75220-240500 D NFC FL 

January 5, 2024, 00:54:02 OTi DALI 75/220…240/500 D NFC FL 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. Page 3 of 7 

Product datasheet 

__ 

## **Dimensions & weight** 

**==> picture [247 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Mounting hole spacing, length|270.0 mm|
|Product weight|205.00 g|
|Cable cross-section, input side|0.5…1.5 mm²|
|Cable cross-section, output side|0.5…1.5 mm²|
|Wire preparation length, input side|8.0…9.0 mm|
|Wire preparation length, output side|8.0…9.0 mm|
|Length|280.0 mm|
|Width|30.0 mm|
|Height|16.0 mm|

**----- End of picture text -----**<br>


## **Colors & materials** 

**Casing material** Metal 

## **Temperatures & operating conditions** 

**==> picture [242 x 78] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Ambient temperature range|-25…+60 °C|
|Maximum temperature at tc test point|75 °C|
|Max.housing temperature in case of fault|110 °C|
|Temperature range at storage|-40…+85 °C|
|Permitted rel. humidity during operation|5…85 %|[1)]|

**----- End of picture text -----**<br>


1) Maximum 56 days/year at 85 % 

## **Lifespan** 

**ECG lifetime** 50000 / 100000 h 

## **Capabilities** 

**==> picture [236 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Programming interface|DALI, NFC|
|Dimmable|Yes|

**----- End of picture text -----**<br>


January 5, 2024, 00:54:02 OTi DALI 75/220…240/500 D NFC FL 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. Page 4 of 7 

__ 

## Product datasheet 

|**Dimming interface**|DALI-2 / Touch DIM / Touch DIM Sensor|
|---|---|
|**Dimming range**|0.1…100 %|
|**Dimming method**|Full analogue dimming / AM/PWM selectable|
|**Constant lumen function**|Programmable|
|**Overheating protection**|Automatic reversible|
|**Overload protection**|Automatic reversible|
|**Short-circuit protection**|Automatic reversible|
|**No-load proof**|Yes|
|**Intended for no-load operation**|No|
|**Max. cable length to lamp/LED module**|2.0 m1)|
|**Suitable for fixtures with prot. class**|I|
|**Suitable for emergency lighting**|Yes|
|**Type of connection, input side**|Push terminal|
|**Type of connection, output side**|Push terminal|
|**Control interface**|DALI|
|**Number of channels**|1|
|**DALI-2 Energy Data**|Yes|
|**DALI-2 Diagnostic Data**|Yes|



1) Output wires must be routed as close as possible to each other 

## **Programming** 

|**Programming device**|DALI magic / NFC Scanner|
|---|---|
|**Tuner4TRONIC Field App**|Yes|
|**Box programming**|Yes|



## **Programmable features** 

**DALI-2 Luminaire Data** Yes 

## **Certificates & standards** 

|**Approval marks – approval**|CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS|
|---|---|
|**Standards**|Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to|
||IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-|
||2/Acc. to IEC 61000-3-3/Acc. to IEC 61547|
|**Type of protection**|IP20|



## **Logistical data** 

**Commodity code** 85044083900 

## **Environmental information** 

January 5, 2024, 00:54:02 OTi DALI 75/220…240/500 D NFC FL 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. Page 5 of 7 

Product datasheet 

__ 

## **Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)** 

**==> picture [380 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Date of Declaration|07-07-2023|
|Primary Article Identifier|4062172020787|
|Candidate List Substance 1|Lead|
|CAS No. of substance 1|7439-92-1|
|Safe Use Instruction|The identification of the Candidate List substance is|
|sufficient to allow safe use of the article.|
|Declaration No. in SCIP database|5ecf784a-d49b-40a3-8f2f-7f2dfa5e33ea|

**----- End of picture text -----**<br>


## Download Data 

**File** User instruction OPTOTRONIC LED Power Supply User instruction OPTOTRONIC LED Power Supply Certificates OT EMC 40050085 200220 Certificates OTI DALI 75 D NFC FL EATON AM35716 070920 Certificates OTI DALI 75 D NFC FL INOTEC AM35716 070920 Certificates OT ENEC 40038085 010322 Certificates OT EMC 40044675 031022 Declarations of conformity OTI DALI D NFC FL CE 3747608 110522 Declarations of conformity OTI DALI D NFC FL UK DoC 4281098 110522 Declarations of conformity EATON(CEAG)-Conformity declaration AM18317 OTi DALI 75 220-240 500 D NFC F L (EN) Declarations of conformity INOTEC Conformity declaration AM18317 OTi DALI 75 220-240 500 D NFC F L (EN) CAD data OTI DALI D NFC FL IGS 090120 CAD data OTI DALI D NFC FL STEP 090120 CAD Data 2-dim OTI DALI D NFC FL CAD2PDF 090120 CAD data 3-dim OTI DALI D NFC FL CAD3PDF 090120 

January 5, 2024, 00:54:02 OTi DALI 75/220…240/500 D NFC FL 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. 

Page 6 of 7 

Product datasheet 

## Ecodesign regulation information: 

## Intended for use with LED modules. 

The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including  dimming if applicable. 

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled. 

## Logistical Data 

|**Product code**|**Product description**|**Packaging unit (Pieces/Unit)**|**Dimensions (length x width x**|**Volume**|**Gross weight**|
|---|---|---|---|---|---|
||||**height)**|||
|4062172020787|OTi DALI|Shipping carton box|300 mm x 128 mm x 106 mm|4.07 dm³|4218.00 g|
||75/220…240/500 D NFC|20||||
||FL|||||



The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. 

__ 

Data privacy 

This OSRAM driver can be configured using the Tuner4TRONIC software. This requires registering on www.myosram.com and downloading theTuner4TRONIC software from the Internet. The Tuner4TRONIC software enables users to access and view the operational data of a luminaire or driver via the corresponding programming interfaces. A password key (Config Lock) must be set up in the driver via the Tuner4TRONIC software in order to control which users can access and view operational data. Follow the instructions for password setup. To grant an external person or company rights to access or view operational data, you can assign password keys. In this case, however, you are responsible for ensuring that the third party concerned takes notice of the information described here. However, OSRAM can read out operating data from devices for maintenance and service purposes even when a password key has been assigned. In individual cases, OSRAM will also use its access rights in order to optimize or improve driver hardware and driver functions. In accordance with data privacy principles, any user of operating data (luminaire manufacturers, third parties with access rights) must ensure that personal data (e.g. name, address, location IDs) are only merged with the prior written consent of the person (end user) concerned. The respective user of the operating data is responsible for providing evidence of consent. 

## Disclaimer 

Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. 

January 5, 2024, 00:54:02 OTi DALI 75/220…240/500 D NFC FL 

© 2024, Inventronics GmbH. All rights reserved. Inventronics is a licensee of the OSRAM brand. OSRAM is a trademark of ams OSRAM. 

Page 7 of 7