LMD400-0048-C940-7030000

**LED MODULE DRIVER DATA SHEET** 

## **Cree[®] LMD300, LMD400 & LMD600 LED Module Drivers** 

## **PRODUCT DESCRIPTION** 

## **FEATURES** 

## **TABLE OF CONTENTS** 

Cree LED modules provide lighting designers and manufacturers with simple, easy-to-adopt LED lighting solutions that reduce luminaire development time and speed time-to-market. Cree LMD300, LMD400 and LMD600 LED module drivers are specifically designed to work with the Cree LMH2 2000-, 3000-, 4000and 6000-lumen light sources to jumpstart the design process for recessed downlights, wall sconces or pendant lights in demanding end markets such as retail, museums, hospitality and restaurants. 

- Input voltage options: 100‑240 V, 100‑277 V, 120‑277 V & 220‑240 V 

- • 0/1‑10 V dimming support for 100‑240 V, 100‑277 V, 120‑277 V & 220‑240 V options 

- DALI + Touch dimming support for 220‑240 V option 

- Optimized for Cree LMH2 2000-, 3000- 4000- and 6000-lm light sources 

- LMD400 enables California Title 24 compliance 

Order Codes.................................................2 Characteristics - LMD300 100- to 240-V 0/1‑10 V Dimming Driver ............................2 Characteristics - LMD300 120- to 277-V 0/1‑10 V Dimming Driver ............................3 Characteristics - LMD300 220- to 240-V 0/1‑10 V Dimming Driver ............................3 Characteristics - LMD300 220- to 240-V DALI + Touch Dimming Driver ....................4 Characteristics - LMD400 120- to 277-V 0/1‑10 V Dimming Driver ............................4 Characteristics - LMD600 100- to 277-V 0/1‑10 V Dimming Driver ............................5 Dimming ......................................................6 Mechanical Dimensions .............................7 Wiring Diagrams ....................................... 10 Thermal Design ........................................ 13 Emergency Battery Operation ................. 13 Safety and Regulatory Notes ................... 14 Packaging ................................................. 16 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **ORDER CODES** 

## **LMD300** 

**==> picture [542 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
Nominal Input  Frequency (Hz) Typical Output Current  Dimming Order Code<br>Voltage (VAC) (mA)<br>100-240 50/60 900 0/1‑10 V LMD300-0040-C900-8030000<br>120-277 50/60 900 0/1‑10 V LMD300-0040-C900-7030000<br>220-240 50/60 900 0/1‑10 V LMD300-0040-C900-2030000<br>220-240 50/60 900 DALI + Touch LMD300-0040-C900-2020000<br>**----- End of picture text -----**<br>


## **LMD400** 

**==> picture [542 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
Nominal Input  Frequency (Hz) Typical Output Current  Dimming Order Code<br>Voltage (VAC) (mA)<br>120-277 50/60 940 0/1‑10 V LMD400-0048-C940-7030000<br>**----- End of picture text -----**<br>


## **LMD600** 

**==> picture [542 x 34] intentionally omitted <==**

**----- Start of picture text -----**<br>
Nominal Input  Frequency (Hz) Typical Output Current  Dimming Order Code<br>Voltage (VAC) (mA)<br>100-277 50/60 1700 0/1‑10 V LMD600-0100-C1A7-7030000<br>**----- End of picture text -----**<br>


## **CHARACTERISTICS - LMD300 100- TO 240-V 0/1-10 V DIMMING DRIVER** 

## Order Code: LMD300-0040-C900-8030000 

**==> picture [542 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics Unit Minimum Typical Maximum<br>Input voltage range VAC 90 264<br>Input power W 40<br>Output current mA 900<br>Output voltage V 40<br>Driver efficiency (@ 55 °C) ‑ with LMH2 2000‑lm light  % 85<br>source<br>Driver efficiency (@ 55 °C) ‑ with LMH2 3000‑lm light  % 86<br>source<br>Power factor - with LMH2 2000-lm light source 0.95<br>Power factor - with LMH2 3000-lm light source 0.95<br>LED driver case temperature °C 0 70<br>**----- End of picture text -----**<br>


- 3‑D models (.STEP files) for the LMD300 LED module drivers are available on the Cree website by selecting the Documentation tab on the LMH2 product page. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

2 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **CHARACTERISTICS - LMD300 120- TO 277-V 0/1-10 V DIMMING DRIVER** 

## Order Code: LMD300-0040-C900-7030000 

**==> picture [542 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics Unit Minimum Typical Maximum<br>Input voltage range VAC 108 305<br>Input power W 40<br>Output current mA 900<br>Output voltage V 40<br>Driver efficiency (@ 55 °C) ‑ with LMH2 2000‑lm light  % 85<br>source<br>Driver efficiency (@ 55 °C) ‑ with LMH2 3000‑lm light  % 86<br>source<br>Power factor - with LMH2 2000-lm light source 0.95<br>Power factor - with LMH2 3000-lm light source 0.95<br>Dimming current @ 120 V mA 2.3<br>Dimming current @ 277 V mA 2.3<br>LED driver case temperature °C 0 70<br>**----- End of picture text -----**<br>


- 3‑D models (.STEP files) for the LMD300 LED module drivers are available on the Cree website by selecting the Documentation tab on the LMH2 product page. 

## **CHARACTERISTICS - LMD300 220- TO 240-V 0/1-10 V DIMMING DRIVER** 

## Order Code: LMD300-0040-C900-2030000 

**==> picture [542 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics Unit Minimum Typical Maximum<br>Input voltage range VAC 207 230 264<br>Input power W 40<br>Output current mA 900<br>Output voltage V 39<br>Driver efficiency (@ 55 °C) ‑ with LMH2 2000‑lm light  % 85<br>source<br>Driver efficiency (@ 55 °C) ‑ with LMH2 3000‑lm light  % 86<br>source<br>Power factor - with LMH2 2000-lm light source 0.95<br>Power factor - with LMH2 3000-lm light source 0.95<br>LED driver case temperature °C 0 70<br>**----- End of picture text -----**<br>


- 3‑D models (.STEP files) for the LMD300 LED module drivers are available on the Cree website by selecting the Documentation tab on the LMH2 product page. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

3 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **CHARACTERISTICS - LMD300 220- TO 240-V DALI + TOUCH DIMMING DRIVER** 

## Order Code: LMD300-0040-C900-2020000 

**==> picture [542 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics Unit Minimum Typical Maximum<br>Input voltage range VAC 207 230 264<br>Input power W 40<br>Output current mA 900<br>Output voltage V 39<br>Driver efficiency (@ 55 °C) ‑ with LMH2 2000‑lm light  % 81<br>source<br>Driver efficiency (@ 55 °C) ‑ with LMH2 3000‑lm light  % 85<br>source<br>Power factor - with LMH2 2000-lm light source 0.95<br>Power factor - with LMH2 3000-lm light source 0.95<br>LED driver case temperature °C 0 70<br>**----- End of picture text -----**<br>


- 3‑D models (.STEP files) for the LMD300 LED module drivers are available on the Cree website by selecting the Documentation tab on the LMH2 product page. 

## **CHARACTERISTICS - LMD400 120- TO 277-V 0/1-10 V DIMMING DRIVER** 

## Order Code: LMD400-0048-C940-7030000 

**==> picture [542 x 214] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics Unit Minimum Typical Maximum<br>Input voltage range VAC 108 305<br>Input power W 48<br>Output current mA 940<br>Output voltage V 22-44<br>Driver efficiency (@ 55 °C) ‑ with LMH2 2000‑lm light  % 85<br>source<br>Driver efficiency (@ 55 °C) ‑ with LMH2 3000‑lm light  % 86<br>source<br>Driver efficiency (@ 55 °C) ‑ with LMH2 4000‑lm light  % 87<br>source<br>Power factor - with LMH2 2000-lm light source 0.95<br>Power factor - with LMH2 3000-lm light source 0.95<br>Power factor - with LMH2 4000-lm light source 0.95<br>Dimming current @ 120 V mA 2.3<br>Dimming current @ 277 V mA 2.3<br>LED driver case temperature °C 0 90<br>**----- End of picture text -----**<br>


- 3‑D models (.STEP files) for the LMD400 LED module driver are available on the Cree website by selecting the Documentation tab on the LMH2 product page. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

4 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **CHARACTERISTICS - LMD600 100- TO 277-V 0/1-10 V DIMMING DRIVER** 

## Order Code: LMD600-0100-C1A7-7030000 

**==> picture [542 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics Unit Minimum Typical Maximum<br>Input voltage range VAC 90 305<br>Input power W 102<br>Output current mA 1700<br>Output voltage V 25-52<br>Driver efficiency (@ 55 °C) ‑ with LMH2 6000‑lm light  % 87<br>source<br>Power factor - with LMH2 6000-lm light source 0.95<br>Dimming current @ 120 V mA .05<br>Dimming current @ 277 V mA .05<br>LED driver case temperature °C 0 76<br>**----- End of picture text -----**<br>


- 3‑D models (.STEP files) for the LMD600 LED module driver are available on the Cree website by selecting the Documentation tab on the LMH2 product page. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

5 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **DIMMING** 

The LMH2 2000-, 3000- and 4000-lm light sources can use the LMD300 LED module driver with either DALI + Touch dimming or 0/110 V dimming and use the LMD400 LED module driver with 0/1‑10 V dimming. The LMH2 6000‑lm light source can use the LMD600 LED module driver with 0/1‑10 V dimming. 

**==> picture [542 x 101] intentionally omitted <==**

**----- Start of picture text -----**<br>
Driver Input Voltage Dimming Lowest Light Level<br>LMD300-0040-C900-8030000 100‑240 V 0/1‑10 V 10%<br>LMD300-0040-C900-7030000 120‑277 V 0/1‑10 V 10%<br>LMD300-0040-C900-2030000 220‑240 V 0/1‑10 V 10%<br>LMD300-0040-C900-2020000 220‑240 V DALI + Touch 10%<br>LMD400-0048-C940-7030000 120‑277 V 0/1‑10 V 10%<br>LMD600-0100-C1A7-7030000 100‑277 V 0/1‑10 V 1%<br>**----- End of picture text -----**<br>


The LMH2 2000, 3000‑ and 4000‑lm light sources combined with the LMD300 DALI + Touch driver is a DALI‑certified device for use with DALI-compliant dimmers. 

**Caution** - DALI dimming and Touch dimming should not be used on the same luminaire. 

## **Setting Up the LMD300 DALI + Touch Driver in Touch Control Mode** 

The LMD300 DALI + Touch driver can be used in touch control mode in installations where DALI control is not installed. To set up touch control mode, wire the driver DALI terminals to 220‑ to 240‑VAC mains power through a pushbutton (a momentary switch rated for 220 to 240 VAC and 0.5 A) as shown in the Wiring Diagrams section of this data sheet. Multiple LMH2 modules can be connected together to be controlled by the same pushbutton. 

To activate touch control mode, turn on power to the LMH2 LED module without pressing the pushbutton, i.e., the switch is open. After one (1) second, the driver automatically enters touch control mode and the pushbutton can then be used to control the LMH2. 

## **Touch Control Mode Operation** 

In touch control mode, a single pushbutton turns the LMH2 LED module on and off and changes its brightness. To turn the module on or off, press and release the pushbutton quickly (in less than 300 ms). When the module is on, change its brightness by pressing and holding the pushbutton. The brightness alternately increases or decreases each time the pushbutton is pressed and held. When the desired brightness is reached, release the pushbutton. The module will remain at this brightness level until the pushbutton is pressed and held again, even if it is turned off and back on. 

Two methods can be used to quickly reach maximum and minimum brightness. For maximum brightness instantly, double-click the pushbutton when the LMH2 LED module is on. Double-clicking means quickly pressing and releasing the pushbutton twice in succession (with less than 300 ms between presses). For minimum brightness, press and hold the pushbutton when the LMH2 is off. The LMH2 LED module turns on at minimum brightness and increases in brightness until the pushbutton is released. 

If multiple LMH2 LED modules are controlled by the same pushbutton, the modules can lose synchronization and not all perform the same action in response to the pushbutton. To synchronize all the modules connected to one pushbutton, press and hold the pushbutton 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

6 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

for at least one (1) second and release it, then double‑click the pushbutton. All connected modules will then be on at maximum brightness, regardless of their previous states. 

Touch control mode operation is summarized in the following table. 

|**Pushbutton Operation**|**Module Operation in Touch Mode**|**Module Operation in Touch Mode**|
|---|---|---|
||**Module On**|**Module Off**|
|Click|All off|All on at previous brightness|
|Press and hold|Brightness increases or decreases opposite of<br>previous press and hold|All on at minimum brightness, increasing brightness<br>while pushbutton held|
|Double-click|All on at maximum brightness||



## **MECHANICAL DIMENSIONS** 

## **Physical Characteristics of the LMD300, LMD400 & LMD600 Drivers** 

|**Physical Characteristic**|**LMD300**<br>**100- to 240-V**<br>**Driver**|**LMD300**<br>**120- to 277-V**<br>**Driver**|**LMD300**<br>**220- to 240-V Drivers**|**LMD400**<br>**120- to 277-V**<br>**Driver**|**LMD600**<br>**100- to 277-V Driver**|
|---|---|---|---|---|---|
|Weight (g)|195|195|264|280|440|
|Maximum height (mm)|37.5|37.5|35|37.5|47|
|Maximum length (mm)|90|90|205|90|160|
|Maximum width (mm)|90|90|80|90|63|



## **LMD300 100- to 240-V and LMD300 & LMD400 120- to 277-V Drivers[1]** 

**==> picture [534 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
90<br>180 ± 10<br> 37.5   76.6<br>STRIPPED 10<br> 30<br> 45<br> 90<br> 76.6<br> 30<br> 20<br>Tc LOCATION  40<br>7.5   7.5<br>M3 OR #6<br>WIRE ROUTING SLOT MOUNTING SLOT<br>TYP 9X TYP 2X pat<br>**----- End of picture text -----**<br>


- 1 Dimensions for all the diagrams are in mm and are for reference only. For exact dimensions and tolerances, refer to the 3‑D models (.STEP files) for the LMD300, LMD400 and LMD600 drivers available by selecting the Documentation tab on the LMH2 product page. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

7 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **LMD300 220- to 240-V Driver - With Standard Covers** 

**==> picture [289 x 217] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 05<br>1 96<br>1 85<br>80 al r ]<br>50 Nell!rr ee | ||<br>T c LOCATION 80<br>M3 OR #6<br>MOUNTING SLOT<br>TYP 2X<br>ee =<br>35<br>Peat |<br>**----- End of picture text -----**<br>


## **LMD300 220- to 240-V Driver - With Optional Conduit Covers** 

**==> picture [209 x 255] intentionally omitted <==**

**----- Start of picture text -----**<br>
205<br>196<br>185<br>80<br>50 Th | |ee | |<br>8 0<br>M3 OR #6<br>MOUNTING SLOT<br>TYP 2X<br> 35<br>40<br>ft<br>ro) 20 KNOCKOUT<br>TYP 4X<br>**----- End of picture text -----**<br>


Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

8 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **LMD600 100- to 277-V Driver** 

**==> picture [377 x 390] intentionally omitted <==**

**----- Start of picture text -----**<br>
 160<br> 61.6<br> 50.8<br>6-32 MOUNTING<br>STUDS<br>Tc<br> 50<br> 63<br>14.4<br>TYP.<br> 8<br>WIRE L = 150mm<br> 47   39<br> 23<br>**----- End of picture text -----**<br>


Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

9 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **WIRING DIAGRAMS** 

## **Electrical Connection** 

For the 100- to 240-V, 100- to 277-V and 120- to 277-V LED module drivers, LMH2 LED module operation is accomplished by connecting the AC mains to the two (2) lead wires (line and neutral) from the driver and connecting the driver output wires to the input leads on the Cree LMH2 light source, as indicated in the following wiring diagrams. For the 220- to 240-V LED module drivers, module operation is accomplished by connecting the AC mains to the appropriate terminal block pins. 

The 100‑ to 240‑V and 120‑ to 277‑V LED module driver lead wires are 152.4 mm long, 18 AWG with the ends stripped 10 mm. The 100‑ to 277‑V LED module driver lead wires are 150 mm long, 18 AWG with the ends stripped 10 mm. The 220‑ to 240‑V LED module drivers have poke-in terminals. 

## **LMD300 100- to 240-V Driver** 

**==> picture [328 x 280] intentionally omitted <==**

**----- Start of picture text -----**<br>
0/1-10V CONTROL<br>BLK - HOT RED<br>TO LIGHT<br>WHT - NEU BLK SOURCE<br>VIO<br>GRY<br>BLK - HOT RED<br>TO LIGHT<br>WHT - NEU BLK SOURCE<br>VIO<br>GRY<br>**----- End of picture text -----**<br>


Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

10 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **LMD300 & LMD400 120- to 277-V Drivers** 

**==> picture [51 x 173] intentionally omitted <==**

**----- Start of picture text -----**<br>
LMD300/<br>LMD400<br>LMD300/<br>LMD400<br>**----- End of picture text -----**<br>


## **LMD300 220- to 240-V 0/1 - 10 V and DALI + Touch Dimming Drivers - Touch Operation Not Required** 

**==> picture [250 x 165] intentionally omitted <==**

**----- Start of picture text -----**<br>
TO DALI BUS OR 0/1-10 V<br>A A<br>‘| |__| :<br>LMD300<br>| & TO LIGHT'SOURCE<br>= -<br>mm | .<br>LMD300<br>**----- End of picture text -----**<br>


Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

11 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **LMD300 220- to 240-V DALI + Touch Driver** 

**==> picture [47 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
LMD300<br>LMD300<br>**----- End of picture text -----**<br>


## **LMD600 100- to 277-V Driver** 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

12 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **Wiring Strain Relief** 

LMD300, LMD400 and LMD600 LED module drivers must not be suspended directly by the leads. Though the wiring from the LMD300, LMD400 and LMD600 LED module drivers is internally strain relieved, additional strain relief methods must be employed if the luminaire is to be suspended solely by the wiring, as in a pendant luminaire. 

## **THERMAL DESIGN** 

## **Expected LMD300 Lifetime versus Temperature at Tc Point** 

**==> picture [542 x 83] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tc (°C) @ 25 °C Room Ambient<br>LMD300<br>Expected Operation Life (Hours) LMD300  LMD300  LMD300  220- to 240-V<br>100- to 240-V 0/1-10 V  120- to 277-V 220- to 240-V<br>DALI + Touch Dimming<br>Dimming Driver  0/1-10 V Dimming Driver 0/1-10 V Dimming Driver Driver<br>35,000 70 70 70 70<br>50,000 65 65 65 65<br>**----- End of picture text -----**<br>


## **Expected LMD400 Lifetime versus Temperature at Tc Point** 

**==> picture [542 x 71] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tc (°C) @ 25 °C Room Ambient<br>Expected Operation Life (Hours) LMD400<br>120- to 277-V<br>0/1-10 V Dimming Driver<br>35,000 90<br>50,000 80<br>**----- End of picture text -----**<br>


## **Expected LMD600 Lifetime versus Temperature at Tc Point** 

**==> picture [542 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tc (°C) @ 25 °C Room Ambient<br>Expected Operation Life (Hours) LMD600<br>100- to 277-V<br>0/1-10 V Dimming Driver<br>50,000 76<br>**----- End of picture text -----**<br>


## **EMERGENCY BATTERY OPERATION** 

The LMD300, LMD400 and LMD600 LED module drivers are constant-current supplies. Interrupting the driver current with a battery supply is an acceptable method of emergency or power outage operation. An acceptable installation should also include a switching mechanism that prevents the battery power from entering the driver through the DC output leads. Confirming backup power supply compatibility is the responsibility of the luminaire manufacturer or installer. Please refer to the backup power supply manufacturer’s instructions for installation and further product information. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

13 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **SAFETY AND REGULATORY NOTES** 

The following tables show the safety and regulatory certifications for the LMD300 and LMD400 LED module drivers. 

**==> picture [310 x 175] intentionally omitted <==**

**----- Start of picture text -----**<br>
LMD300 100- to 240-VAC Driver<br>Standard File Number<br>J61347‑1 (H20)<br>CJP2012109004-0578<br>J61347‑1 (H21)<br>EN 61347-1<br>Safety<br>EN 61347-2-13<br>CJP2012109004-0578<br>CE SELV equivalent<br>IP-20<br>EN 55015<br>Electromagnetic  IEC 61000-3-2 CJP2012109004-0578<br>compatibility IEC 61000-3-3<br>IEC 61547<br>Environmental RoHs<br>**----- End of picture text -----**<br>


**==> picture [542 x 261] intentionally omitted <==**

**----- Start of picture text -----**<br>
LMD300 & LMD400 120- to 277-VAC Drivers LMD300 220- to 240-VAC Driver<br>Standard File Number Standard File Number<br>UL [®] /cUL recognized (UL8750)<br>Class 2 power supply<br>UL – Damp rated E333437<br>Air handling (plenum)<br>Safety 5VA flame rating<br>EN 61347-1 EN 61347-1<br>EN 61347-2-13 RZCE2012-0221LVD EN 61347-2-13 RZCE2012-0205LVD<br>RZCE2012-0512LVD<br>101342922CHI-001<br>CE SELV equivalent CE SELV equivalent RZCE2012-0574LVD-M1<br>IP-20 IP-20<br>EN 55015 EN 55015<br>IEC 61000-3-2 RZCE2012-0221EMC IEC 61000-3-2 RZCE2012-0205EMC<br>RZCE2012-0512EMC<br>Electromagnetic  IEC 61000-3-3 R10051625-EMC IEC 61000-3-3 RZCE2012-0574EMC-M1<br>compatibility<br>IEC 61547 IEC 61547<br>FCC 47 CFR Part 15 Class B/<br>ICES 03<br>IEEE C.62.41‑1991 Class A (surge)<br>Regulatory<br>NEMA 410<br>Environmental RoHS RoHs<br>**----- End of picture text -----**<br>


Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

14 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

**==> picture [306 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
LMD600 100- to 277-VAC Driver<br>Standard File Number<br>UL/cUL recognized (UL8750)<br>Class 2 power supply<br>UL – Damp rated E333437<br>Air handling (plenum)<br>Safety 5VA flame rating<br>EN 61347-1<br>EN 61347-2-13<br>101564185CHI-001<br>CE SELV equivalent<br>IP-20<br>EN 55015<br>IEC 61000-3-2<br>R10273893-EMC<br>Electromagnetic  IEC 61000-3-3<br>compatibility<br>IEC 61547<br>FCC 47 CFR Part 15 Class B/<br>ICES 03<br>Environmental RoHS<br>**----- End of picture text -----**<br>


## **Safety Certification** 

Together, the LMH2 light source combined with the LMD300, LMD400 or LMD600 LED module driver is “suitable for damp locations; covered ceilings.” Final luminaire designs should go through safety certification as required, which is the responsibility of the luminaire manufacturer. 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

15 

**LMD300, LMD400 & LMD600 LED MODULE DRIVERS** 

## **PACKAGING** 

LMD300 100- to 240–V LED module drivers are packaged in boxes of 10, which are then combined in cartons of 5 boxes, or 50 LMD300 120- to 240–V drivers. 

LMD300 and LMD400 120- to 277–V LED module drivers are packaged in boxes of 10, which are then combined in cartons of 5 boxes, or 50 LMD300 or LMD400 120- to 277–V drivers. 

LMD300 220- to 240-V LED module drivers are packaged in boxes of 5, which are then combined in cartons of 10 boxes, or 50 LMD300 220- to 240-V drivers. 

LMD600 100- to 277–V LED module drivers are packaged in boxes of 5, which are then combined in cartons of 5 boxes, or 25 LMD600 100- to 277–V drivers. 

Box and carton sizes are as follows. 

Box of 10 LMD300 100- to 240-V LED module drivers: 255 x 194 x 98 mm 

Carton of 5 LMD300 100- to 240-V driver boxes: 509 x 275 x 222 mm 

Box of 10 LMD300 or LMD400 120- to 277-V LED module drivers: 255 x 194 x 98 mm Carton of 5 LMD300 or LMD400 120- to 277-V driver boxes: 509 x 275 x 222 mm 

Box of 5 LMD300 220- to 240-V LED module drivers: 285 x 211 x 91 mm Carton of 10 LMD300 220- to 240-V driver boxes: 588 x 471 x 243 mm 

Box of 5 LMD600 100- to 277-V LED module drivers: 490 x 235 x 90 mm Carton of 5 LMD600 100- to 270-V driver boxes: 510 x 510 x 255 mm 

Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree[®] and the Cree logo are registered trademarks of Cree, Inc. UL[®] and the UR logo are registered trademarks of UL LLC. 

16