Image not available
Illustrative purposes only
IM801D-32-AH-16.000MHZ
MEMS Oscillator, 16 MHz, SMD, 2.5mm x 2mm, 25 ppm, 3.3 V, IM801, LVCMOS / HCMOS
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: ILSI AMERICA
- Product type: MEMS Oscillators
- SVHC: No SVHC (25-Jun-2025)
- Frequency Nom: 16MHz
- Product Range: IM801
- Supply Voltage Nom: 3.3V
- Frequency Stability + / -: 25ppm
- Operating Temperature Max: 85°C
- Operating Temperature Min: -40°C
- Oscillator Case / Package: SMD, 2.5mm x 2mm
- Oscillator Output Compatibility: LVCMOS / HCMOS
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.572 € |
| Current stock | 1000+ |
| Lead time | 30 days |
Datasheet
**MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** **IM801 Series** - **Features: Typical Applications:** - ~~SSS SS~~ MEMS Technology Fibre Channel Direct pin to pin drop-in replacement for industry-standard packages Server and Storage LVCMOS Compatible Output GPON, EPON Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0 mm x mm 100M / 1G /10G Ethernet - Six supply voltages options, +1.8 V, +2.5 V, +2.8 V, +3.3 V and +2.25 V to +3.63 V continuous - Pb-free, Halogen-free, Antimony-free - RoHS and REACH compliant - Fast delivery times **==> picture [504 x 353] intentionally omitted <==** **----- Start of picture text -----**<br> ||||| |---|---|---|---| |Electrical Specifications:| |Frequency Range|1.000 MHz to 110.000MHz| |Inclusive of Initial Tolerance, Operating Temperature Range, Load,| |Frequency Stability|See Part Number Guide| |Voltage, and Aging (First year at +25 ºC)| |Operating Temperature|See Part Number Guide| |Supply Voltage (Vdd) 10%|See Part Number Guide| |3.8 mA typ./ 4.5 mA max|No load condition, F = 20 MHz, Vdd = +2.8 V to +3.3 V| |Current Consumption|3.7 mA typ./ 4.2 mA max|No load condition, F = 20 MHz, Vdd = +2.5 V| |3.5 mA typ./ 4.1 mA max|No load condition, F = 20 MHz, Vdd = +1.8 V| |4.2 mA max|Vdd = +2.5 V to +3.3 V, OE = GND, Output in high-Z state| |OE Disable Current| |4.0 mA max|Vdd = +1.8 V, OE = GND, Output in high-Z state| |2.1 µA typ./ 4.3 µA max|= GND, Vdd = +2.8 V to +3.3V| |Standby Current|1.1 µA typ. / 2.5 µA max|= GND, Vdd = +2.5 V| |0.2 µA typ. / 1.3 µA max|= GND, Vdd = +1.8 V| |Waveform Output|LVCMOS / HCMOS| |Symmetry|45%/55%|50% of waveform all Vdds| |1.0 nSec typ./ 2.0 nSec max|Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V from 20% to 80% of waveform| |Rise / Fall Time| |1.3 nSec typ./ 2.5 nSec max|Vdd = +1.8 V from 20% to 80% of waveform| |Logic “1”|90% of Vdd min| |Logic “0”|10% of Vdd max| |Input High Voltage|70% of Vdd min|Pin 1, OE or| |Input Low Voltage|30% of Vdd max|Pin 1, OE or| |50kΩ min / 87kΩ typ. 150kΩ max|Pin 1, OE logic high or logic low or|logic high| |Input Pull-up Impedance|2.0MΩ min|Pin 1,|logic Low| |Startup Time|5.0 mSec max|Measured from the time Vdd reaches its rated min value| |Enable/Disable time|130 nSec max|F = 110 Mhz. For other frequencies, T_oe =100 nSec = 3 cycles| |Resume Time|5.0 mSec max|Measured from the time|pin crosses 50% threshold| |1.8pSec typ./ 3.0pSec max|F = 75 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V| |RMS Period Jitter| |1.8pSec typ./ 3.0pSec max.|F = 75 MHz, Vdd = +1.8 V| |12.0 pSec typ./ 25.0 pSec max|F = 75 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V| |Peak-to-peak Period Jitter| |14.0 pSec typ./ 30.0 pSec max|F = 75 MHz, Vdd = +1.8 V| |0.5pSec typ./ 0.9 pSec max|F = 75 MHz, Integration Bandwidth = 900 kHz to 7.5 MHz| |RMS Phase Jitter (random)| |1.3pSec typ./ 2.0pSec max|F = 75 MHz, Integration Bandwidth = 12 kHz to 20.0 MHz| **----- End of picture text -----**<br> ## **Notes:** All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. Typical values are at +25ºC and nominal supply voltage. **Absolute Maximum Limits** **==> picture [329 x 54] intentionally omitted <==** **----- Start of picture text -----**<br> ||| |---|---| |Storage Temperature|-65ºC to +150ºC| |Supply Voltage (Vdd)|-0.5 VDC to 4.0 VDC| |Electrostatic Discharge|2000 V max| |Solder Temperature (follow standard Pb free soldering guidelines)|260ºC max| |Junction Temperature|150ºC max| **----- End of picture text -----**<br> Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com ~~ee~~ Specifications subject to change without notice Page 1 of 9 **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** **IM801 Series** ## **Ordering Information:** |**Ordering Information:**|**Ordering Information:**|**Ordering Information:**|**Ordering Information:**|**Ordering Information:**| |---|---|---|---|---| |**Part Number Guide**<br>Packages<br>Input Voltage<br>Operating<br>Temperature<br>Output Drive<br>Strength<br>Stability<br>(ppm)<br>Select Function<br>Frequency||||| |IM801A – 7.0 x 5.0<br>IM801B – 5.0 x 3.2<br>IM801C – 3.2 x 2.5<br>IM801D – 2.5 x 2.0<br>IM801E – 2.0 x 1.6|1 = +1.8 V<br>6 = +2.5 V<br>2 = +2.8 V<br>7 = +3.0 V<br>3 = +3.3 V<br>8 = +2.25 V to +3.63 V|1 = 0ºC to +70ºC<br>2 = -40ºC to +85ºC<br>3 = -20ºC to +70ºC|- = Default<br>(see tables 2<br>through 6)|E = ±10<br>F = ±20<br>A = ±25<br>B = ±50| Sample Part Number: **IM801C-62-FS-20.0000MHz** This 20.0000 MHz oscillator in a 3.2 x 2.5 package with stability ±20 ppm from -40ºC to +85ºC using a supply voltage of +2.5 V. The Output Drive Strength (Rise and Fall Time) is the default value 1.0 nSec per Table 3 with 15 pF load. With Pin 1 function as Standby Sample Part Number: **IM801D-71RAO-66.0000MHz** This 66.0000 MHz oscillator in a 2.5 x 2.0 package with stability ±25 ppm from 0ºC to +70ºC using a supply voltage of +3.0 V. The Output Drive Strength (Rise and Fall Time) is the R drive strength is 4.54 nSec per Table 5 with 30 pF load. With Pin 1 function is not connected Notes: - Not all options are available at all frequencies and temperatures ranges. - Please consult with sales department for any other parameters or options. - Oscillator specification subject to change without notice. ## **Test Circuit** ## **Waveform** Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● ~~a~~ www.ilsiamerica.com Specifications subject to change without notice Page 2 of 9 **IM801 Series** ## **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** ## **Performance Plots:** Figure 1: Idd vs Frequency Figure 2: Frequency vs Temperature Figure 3: RMS Period Jitter vs Frequency Figure 4: Duty Cycle vs Frequency Figure 5: 20% to 80% Rise Time vs Temperature Figure 6: 20% to 80% Fall Time vs Temperature Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● ~~a~~ www.ilsiamerica.com Specifications subject to change without notice Page 3 of 9 **IM801 Series** ## **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** ## **Performance Plots (Cont.)** Figure 7: RMS Integrated Phase Jitter Random (12 kHz to 20 MHz) vs Frequency Figure 8: RMS Integrated Phase Jitter Random (900 kHz to 20 MHz) vs Frequency **Notes:** - All plots are measured with 15pF load at room temperature unless otherwise stated. - Phase noise plots are measured with Agilent E5052B signal source analyzer integration range is up to 5 MHz for carrier frequencies below 40 MHz ## **Environmental Specifications:** |**Environmental Compliance**<br>Parameter<br>Condition/Test Method|**Environmental Compliance**<br>Parameter<br>Condition/Test Method| |---|---| |Mechanical Shock|MIL-STD-883F, Method 2002| |Mechanical Vibration|MIL-STD-883F, Method 2007| |Temperature Cycle|JESD22, Method A104| |Solderability|MIL-STD-883F, Method 2003| |Moisture Sensitivity Level|MSL1 at +260ºC| ## **Pb Free Solder Reflow Profile** Units are backward compatible with +240ºC reflow processes |Ts max to TL(Ramp-up Rate)|3ºC / second max| |---|---| |Preheat<br>Temperature min (Ts min)<br>Temperature typ (Ts typ)<br>Temperature max (Ts max)<br>Time (Ts)|150ºC<br>175ºC<br>200ºC<br>60 to180 seconds| |Ramp-up Tate (TLto Tp|3ºC / second max| |Time Maintained Above<br>Temperature (TL)<br>Time (TL)|217ºC<br>60 to 150 seconds| |Peak Temperature (Tp)|260ºC max for seconds| |Time within 5ºC to Peak<br>Temperature (Tp)|20 to 40 seconds| |Ramp-down Rate|6ºC / second max| |Tune 25ºC to Peak Temperature|8 minute max| |Moisture Sensitivity Level (MSL)|Level 1| Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● ~~a~~ www.ilsiamerica.com Specifications subject to change without notice Page 4 of 9 **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** **IM801 Series** ~~(|~~ **Pin Functionally** |**Pin Functionally**<br>~~(|~~|**Pin Functionally**<br>~~(|~~|**Pin Functionally**<br>~~(|~~|**Pin Functionally**<br>~~(|~~|**Pin Functionally**<br>~~(|~~| |---|---|---|---|---| |**Pin Description**<br>Pin<br>Symbol<br>Functionality<br>Pin Assignments<br>~~a~~<br>~~a~~||||| |1|OE|Tri-state|High or Open = specified frequency output<br>Low = Output is high impedance,onlyoutput is disabled.|1<br>4<br>3<br>2<br>Top View<br>GND<br>Vdd<br>OUT<br>OE<br>ST<br>N/C| |||Standby|High or Open = specified frequency output.<br>Low = Output is low. Device goes to sleep mode. Supply current<br>reduces to standbycurrent.|| ||N/C|No Connect|Any voltage between 0.0 V to Vdd or Open = specified frequency<br>output<br>Pin 1 has no functiion|| |2<br>~~a~~|GND<br>~~a~~<br>~~SS~~|Power<br>~~a~~<br>~~SS~~|Electricalground<br>~~a~~<br>~~ee~~|| |3<br>~~a~~|Out|Output|Oscillator output<br>~~ee~~|| |4<br>~~a~~|Vdd<br>~~SS~~|Power<br>~~SS~~|Power supplyvoltage<br>~~ee~~|| |**Notes:**<br>1.<br>In OE or<br>mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally<br>driven. If Pin 1 needs to be left floating, use the NC option.<br>2.<br>A capacitor of value 0.1 µF or higher between Pin 4 (Vdd) and Pin 1 (GND) is required.||||| **Notes:** 1. In OE or mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally driven. If Pin 1 needs to be left floating, use the NC option. 2. A capacitor of value 0.1 µF or higher between Pin 4 (Vdd) and Pin 1 (GND) is required. ## **Pin 1 Configuration Options (OE, or** ST **, or NC)** Pin 1 of the IM801 can be factory-programmed to support three modes: Output Enable (OE), Standby ( ) or No Connect (NC). ## **Output Enable (OE) Mode** In the OE mode, applying logic Low to the OE pin only disables the output driver and puts it in Hi-Z mode. The core of the device continues to operate normally. Power consumption is reduced due to the inactivity of the output. When the OE pin is pulled High, the output is typically enabled in <1 µSec. ## **Standby** ST **Mode** In the ST mode, a device enters into the standby mode when Pin 1 pulled Low. All internal circuits of the device are turned off. The current is reduced to a standby current, typically in the range of a few µA. When is pulled High, the device goes through the “resume” process, which can take up to 5 mSec. ## **No Connect (NC) Mode** In the NC mode, the device always operates in its normal mode and outputs the specified frequency regardless of the logic level on Pin 1. Table 1 below summarizes the key relevant parameters in the operation of the device in OE, ST, or NC mode. |**Parameters**<br>Active current 20.0 MHz(max +1.80 VDC)<br>~~es~~|**OE**<br>4.1 mA<br>es|**ST**<br>4.1 mA<br>es|**NC**<br>4.1 mA| |---|---|---|---| |OE disable current(max +1.80 VDC)<br>~~es~~|4.0 mA<br>~~es~~|N/A<br>~~es~~|N/A<br>~~ee~~| |Standbycurrent(typical +1.80 VDC)<br>~~es~~|N/A<br>~~ee~~|0.6µA<br>~~es~~|N/A<br>~~ee~~| |OE enable time at 20.0 MHz(max)<br>~~es~~|200 nSec<br>~~es~~|N/A<br>~~ee~~|N/A| |Resume time from standby<br>(max,all frequency)|N/A|5 mSec|N/A| |Output driver in OE disable/standbymode<br>~~es~~|High Z<br>~~es~~||N/A| |**Table 1 OE vs.**<br> **vs. NC**|||| Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com ~~ee~~ Specifications subject to change without notice Page 5 of 9 **IM801 Series** ## **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** ## **Timing Diagrams:** Figure 9: Startup Timing (OE/ Mode) Figure 10: Standby Resume Timing ( Mode Only) Figure 11: OE Enable Timing (OE Mode Only) Figure 12: OE Disable Timing (OE Mode Only) Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com ~~a~~ Specifications subject to change without notice Page 6 of 9 **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** **IM801 Series** **==> picture [536 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||||||||||||||||||| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |Selectable Drive Strength Options| |Rise/Fall Time (20% to 80%) vs CLOAD Tables| |eS|Rise/Fall Time Typ|(nSec)|ee|Rise/Fall Time Typ|(nSec)| |Drive Strength|Drive Strength| |5 pF|15 pF|30 pF|45 pF|60 pF|5 pF|15 pF|30 pF|45 pF|60 pF| |(CLOAD)|(CLOAD)| |a|L|Re|6.16|11.61|ee|22.00|31.27|es|39.91|ee|L|4.13|ee|8.25|ee|12.82|ee|21.45|ee|27.79|eee| |es|A|3.19|es|6.35|es|11.00|16.01|ee|21.52|A|2.11|4.27|7.64|11.20|14.49| |eS|R|Re|2.11|4.31|ee|7.65|10.77|14.47|ee|R|1.45|2.81|5.16|7.65|9.88| |es|B|1.65|3.23|5.79|8.18|11.08|B|1.09|ee|2.20|ee|3.88|ee|5.86|ee|7.57|eee| |es|es|ee| |eS|T|Re|0.93|1.91|ee|3.32|4.66|6.48|ee|T|0.62|1.28|2.27|3.51|4.45| |es|E|0.78|1.66|2.94|4.09|5.74|- = default|0.54|ee|1.00|ee|2.01|ee|3.10|ee|4.01|eee| |a|U|0.70|es|1.48|2.64|ee|3.68|5.09|U|0.43|0.96|1.81|2.79|3.65| |Re|ee|es|ee|ee|ee|ee|ee|eee| |- = default|Rs RS|0.65|1.30|2.40|A|3.35|A|4.56|eC|F|0.34|CD|0.88|A|1.64|A|2.54|3.32| **----- End of picture text -----**<br> Table 2: Vdd = +1.8 V Rise / Fall time for Specific CLOAD Table 3: Vdd = +2.5 V Rise/Fall time for Specific CLOAD **==> picture [536 x 140] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||||||||||||||||||| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |Rise/Fall Time Typ|(nSec)|Rise/Fall Time Typ|(nSec)| |a f|y|ee| |Drive Strength|Drive Strength| |5 pF|15 pF|30 pF|45 pF|60 pF|5 pF|15 pF|30 pF|45 pF|60 pF| |(CLOAD)|(CLOAD)| |eS|L|Re|3.77|7.54|ee|12.28|es|19.57|25.27|ee|L|3.60|ee|7.21|ee|11.97|ee|18.74|eee|24.30|eee| |es|A|Rs|1.94|3.90|es|7.03|10.24|ee|13.34|A|1.84|3.71|6.72|9.86|12.68| |eS|R|Re|1.29|2.57|ee|4.72|es|7.01|9.06|ee|R|1.22|ee|2.46|ee|4.54|ee|6.76|eee|8.62|eee| |es|B|Rs|0.97|2.00|es|3.54|5.43|ee|6.93|B|0.89|1.92|3.39|5.20|6.64| |eS|T|Re|0.55|1.12|ee|2.08|es|3.22|4.08|- = default|ee|0.51|ee|1.00|ee|1.97|ee|3.07|eee|3.90|eee| |es|- = default|Rs|0.44|1.00|es|1.83|2.82|ee|3.67|E|0.38|0.92|1.72|2.71|3.51| |eS|U|Re|0.34|0.88|ee|1.64|es|2.52|3.30|ee|U|0.30|ee|0.83|ee|1.55|ee|2.40|eee|3.13|eee| |eS|F|0.29|SR|0.81|A|1.48|2.29|2.99|eG|F|0.27|GD|0.76|A|1.39|A|2.16|2.85| **----- End of picture text -----**<br> Table 4: Vdd = +2.8 V Rise/Fall time for Specific CLOAD Table 5: Vdd = +3.0 V Rise/Fall time for Specific CLOAD **==> picture [261 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||||||||| |---|---|---|---|---|---|---|---|---|---|---|---| |nd|Rise/Fall Time Typ|(nSec)| |Drive Strength| |5 pF|15 pF|30 pF|45 pF|60 pF| |(CLOAD)| |es|L|3.39|ee|6.88|es|11.63|ee|17.56|ee|23.59|ee| |es|A|1.74|ee|3.50|ee|6.38|ee|8.98|eee|12.19|eee| |es|R|1.16|ee|2.33|es|4.29|ee|6.04|ee|8.34|ee| |es|B|0.81|ee|1.82|ee|3.22|ee|4.52|ee|6.33|eee| |es|- = default)|0.46|ee|1.00|es|1.86|ee|2.60|ee|3.84|ee| |es|E|0.33|ee|0.87|ee|1.64|ee|2.30|ee|3.35|eee| |es|U|0.28|ee|0.79|es|1.46|ee|2.05|ee|2.93|ee| |es|F|0.29|ee|0.81|ee|1.31|ee|1.83|ee|eee|2.61| |Table 6: Vdd = +3.3 V Rise/Fall time for Specific CLOAD| **----- End of picture text -----**<br> Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com ~~a~~ Specifications subject to change without notice Page 7 of 9 **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** **IM801 Series** **==> picture [552 x 616] intentionally omitted <==** **----- Start of picture text -----**<br> Ce Mechanical Detail<br>eee Package Dimensions and Suggest Land Pattern<br>Option E: 2.00 x 1.60 x 0.80 Package Suggested Land Pattern<br>2.00 ±0.05 1.23 1.50<br>3 4<br>i<br>Marking 1.60 ±0.05 _ 0.93 Bottom View ! [ | LJ<br>2 1 0.48 1.20<br>:<br>0.80 max 0.68 ~ O O o, 0.8<br>i<br>0.9 L _ |<br>Option D: 2.50 x 2.00 x 0.80 Package Suggested Land Pattern<br>2.50 ±0.05 1.00 1.90<br>3 4<br>i<br>Marking 2.00 ±0.05 _ 1.10 Bottom View ! [ | Ld<br>2 1 0.5 1.50<br>0.80 max 0.75 7 ~ 1.0<br>!- : ‘ O o!<br>a<br>1.1 |<br>Option C: 3.20 x 2.50 x 0.80 Package Suggested Land Pattern<br>3.20 ±0.05 2.1 2.20<br>3 4<br>Marking 2.50±0.05 0.90 Bottom View<br>i 2 1 0.7 ! 1.90<br>0.80 max 0.9 ~ * 1.2<br>!2 Bo ‘ O o!<br>a<br>1.4 |<br>Option B: 5.00 x 3.20 X 0.80 Package Suggested Land Pattern<br>5.00 ±0.05 2.39 2.54<br>3 4<br>Marking 3.20 ±0.05 0.80 Bottom View<br>: 2 1 1.1 | 2.20 |<br>. | UU am aln | |<br>0.80 max 1.15 ! 1.6<br>!<br>a a a n [ | [| i<br>1.5 L |<br>Option A: 7.00 x 5.00 X 1.00 Package Suggested Land Pattern<br>7.00 ±0.05 5.08 5.08<br>3 4<br>Marking 5.00 ±0.05 _ 2.60 Bottom I } LJ<br>View<br>3.81<br>a ! f _ 2 1 1.1 i !<br>1.00 max 1.4 j ! 2.0<br>!<br>a 7 Or [ | [| i<br>2.2 L |<br>Marking Package Information<br>Line 1 = XXXXX (Lot Code) Leadframe: C194<br>Dot to denote Pin 1 location Plating: NiPdAu<br>**----- End of picture text -----**<br> Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com ~~a~~ Specifications subject to change without notice Page 8 of 9 **MEMS Oscillator, Low Power, LVCMOS, 1.000 MHz to 110.000 MHz** **IM801 Series** **==> picture [540 x 156] intentionally omitted <==** **----- Start of picture text -----**<br> Te—SSC‘SCts Tape and Reel Dimensions<br>PITCH REEL DIA<br>00000000 \'<br>Q1 Q2 TAPE<br>WIDTH<br>© ew,<br>Q3 Q4 f\<br>Q<br>!<br>—-----------» > . 7<br>DIRECTION OF FEED<br>REF: EIA-481-E<br>**----- End of picture text -----**<br> |**Part**<br>**Number**|**Size**|**Pitch**|**Pitch**<br>**Tape**<br>**Width**|**Pin**<br>**Orient.**|**Reel**<br>**Dia.**|**Cou**<br>**nt**| |---|---|---|---|---|---|---| |IM801A|7.0 x 5.0|7.0 x 5.0<br>8.0 ± 0.1|8.0 ± 0.1<br>16.3 max|Q1|180|1000| ||||||330|3000| |IM801B|5.0 x 3.2|5.0 x 3.2<br>8.0 ± 0.1|8.0 ± 0.1<br>12.3 max|Q1|180|1000| ||||||330|3000| |IM801C|3.2 x 2.5|3.2 x 2.5<br>4.0 ± 0.1|4.0 ± 0.1<br>8.3 max|Q1|180|3000| |IM801D|2.5 x 2.0|2.5 x 2.0<br>4.0 ± 0.1|4.0 ± 0.1<br>8.3 max|Q1|180|3000| |IM801E|2.0 x 1.6|2.0 x 1.6<br>4.0 ± 0.1|4.0 ± 0.1<br>8.3 max|Q1|180|3000| Notes: - All dimensions are in mm. - Do not scale drawings. ## **PROPRIETARY AND CONFIDENTIAL** THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. Rev: 08/18/17_B ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● ~~ee~~ www.ilsiamerica.com Specifications subject to change without notice Page 9 of 9
Updated at April 29, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →