GDE-22C070Z2

## **22W Constant Current LED Driver** 

## **Features** 

- Constant current driver 

- Independent compact design 

- Protection : short circuit /OLP/OVP 

- Meet EMC standards 

- 100% full load burn-in test 

- High efficiency, long life and high reliability 

- Suitable for LED lighting 

## **Specifications** 

Voltage Range : 100V AC to 240V AC Frequency Range : 50/60Hz Input AC Current : 0.11mA @ 230V Power Factor : >0.9pF T H D (%) : <20% (Full load) Output Voltage Range : 15V DC to 35V DC Rated Current Range : 700mA Rated Power Max : 22W Output Efficiency : >80% (Full Load) No Load Output Voltage : <50V DC Short Circuit Power Consumption : <2W Ambient Temp. : -10°C to +50°C Environment Casing Temperature : +80°C IP grade : IP20 Safety Approval Safety Standards : CE 

## **Diagram** 

**Wiring Diagram** 

## **Notes:** 

1.  Lamps must be wired in series, and total value of Vf should be under rated DC Voltage. 

2.  Disconnect the mains supply before installing. Do not turn on/off from output port. 

**Part Number Table** 

3. Parameter measured at full load 25°C ambient temperature. **Description Part Number** 22W Constant Current LED Driver GDE-22C070Z2 Dimensions : Millimetres ~~J~~ 

## Dimensions : Millimetres 

**Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - ELEC is the registered trademark of Premier Farnell Limited 2019. 

Newark.com/exclusive-brands Farnell.com/exclusive-brands ~~OEE~~ Element14.com/exclusive-brands 

Page <1> 

04/04/22 V1.0