ES2G.

## ES2x Series 

## **Features:** 

- Glass passivated junction chip. 

- For surface mounted application. 

- Low profile package. 

- Built-in strain relief. 

- Ideal for automated placement. 

- Easy pick and place. 

- Superfast recovery time for high efficiency. 

- Glass passivated chip junction. 

- High temperature soldering: 260°C/10 seconds at terminals. 

- Plastic material. 

## **SMB/DO-214AA** 

**==> picture [120 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions : Inches (Millimetres)<br>**----- End of picture text -----**<br>


## **Mechanical Data:** 

Cases : Moulded plastic. Terminals : Pure tin plated, lead free. Polarity : Indicated by cathode band. Packing : 12mm tape per EIA STD RS-481. Weight : 0.093 gram. 

Page <1> 

21/07/08  V1.1 

## ES2x Series 

## **Maximum Ratings and Electrical Characteristics** 

Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 

|For capacitive load, derate current by 20%.|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|**Type Number**|**Symbol**|**ES2A**|**ES2B**|**ES2C**|**ES2D**|**ES2F**|**ES2G**|**ES2H**|**ES2J**|**Units**|
|Maximum Recurrent Peak Reverse Voltage|VRRM|50|100|150|200|300|400|500|600|V|
|Maximum RMS Voltage|VRMS|35|70|105|140|210|280|350|420||
|Maximum DC Blocking Voltage|VDC|50|100|150|200|300|400|500|600||
|Maximum Average Forward Rectified Current|I(AV)|2.0||||||||A|
|Peak Forward Surge Current, 8.3ms<br>Single Half Sine-wave Superimposed on<br>Rated Load (JEDEC method )|IFSM|50|||||||||
|Maximum Instantaneous Forward Voltage<br>at 2.0A|VF|0.95||||1.3||1.7||V|
|Maximum DC Reverse Current<br>at TA = 25°C at Rated DC Blocking Voltage<br>at TA = 100°C|IR|10<br>350||||||||µA<br>µA|
|Maximum Reverse Recovery Time (Note 1)|Trr|35||||||||nS|
|Typical Junction Capacitance ( Note 2 )|Cj|25||||20||||pF|
|Maximum Thermal Resistance (Note 3)|RθJA<br>RθJL|75<br>20||||||||°C/W|
|Operating Temperature Range|TJ|-55 to +150||||||||°C|
|Storage Temperature Range|TSTG||||||||||



Notes: 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A. 

2. Measured at 1MHz and Applied VR = 4.0 Volts. 

3. Units Mounted on PCB 0.4 x 0.4 inches (10mm x 10mm) Pad Areas. 

Page <2> 

21/07/08  V1.1 

## ES2x Series 

## **Ratings and Characteristic Curves (ES2A thru ES2J)** 

## **Maximum Forward Current Derating Curve** 

## **Typical Reverse Characteristics** 

**==> picture [189 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
[eeodceld<br>"so<br>a0 ap 120<br>Lead Temperature (°C)<br>Average Forward  Current (A)<br>**----- End of picture text -----**<br>


**Maximum Non-Repetitive Peak Forward Surge Current** 

**==> picture [107 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Number of Cycles at 60Hz<br>**----- End of picture text -----**<br>


## **Typical Junction Capacitance** 

**==> picture [178 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
SNUTTM<br>Se|<br>an eB il|l|| te<br>10 maaillil<br>a 1<br>Reverse Voltage (V)<br>Junction Capacitance, pF<br>**----- End of picture text -----**<br>


**==> picture [253 x 215] intentionally omitted <==**

**----- Start of picture text -----**<br>
ESa ee<br>===—=a=<br>ee ee ee<br>=== SE |<br>SS = Oe<br>a ee ee ee ee eee eee<br>oi [| | 7~T J JT<br>es SSee<br>0.04 a ee<br>Percent of Rated Peak Reverse Voltage (%)<br>0 20 40 60 80 100 120 140<br>A)<br>µ<br>Instantaneous Reverse Current (<br>**----- End of picture text -----**<br>


**Typical Instantaneous Forward Characteristics** 

**==> picture [170 x 200] intentionally omitted <==**

**----- Start of picture text -----**<br>
7 —E524-D bf}a ee4,<br>| [7] 4.<br>-—_— | 4 |<br>ae ed ee ee eee<br>TT<br>04 06 Forward Voltage (V) O8 10 1.2 14<br>Instantaneous Forward Current (A)<br>**----- End of picture text -----**<br>


Page <3> 

21/07/08  V1.1 

## ES2x Series 

## **Reverse Recovery Time Characteristic and Test Circuit Diagram** 

- Note: 1. Rise Time = 7ns Maximum. Input Impedance = 1 Megohm 22pf 

   2. Rise Time = 10ns Maximum Source Impedance = 50 ohms. 

## **Part Number Table** 

|**Part Number Table**||
|---|---|
|**Description**|**Part Number**|
|Diode, Ultra-Fast, 2A, 50V|ES2A|
|Diode, Ultra-Fast, 2A, 100V|ES2B|
|Diode, Ultra-Fast, 2A, 150V|ES2C|
|Diode, Ultra-Fast, 2A, 200V|ES2D|
|Diode, Ultra-Fast, 2A, 300V|ES2F|
|Diode, Ultra-Fast, 2A, 400V|ES2G|
|Diode, Ultra-Fast, 2A, 500V|ES2H|
|Diode, Ultra-Fast, 2A, 600V|ES2J|



Page <4> 

21/07/08  V1.1 

## ES2x Series 

## **Notes:** 

## **International Sales Offices:** 

**AUSTRALIA – Farnell** Tel No: ++61 1300 361 005 Fax No: ++61 1300 361 225 

**AUSTRIA – Farnell** Tel No: ++ 43 662 2180 680 Fax No: ++ 43 662 2180 670 

**FINLAND – Farnell** Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 

**FRANCE – Farnell** Tel No: ++ 33 474 68 99 99 Fax No: ++ 33 474 68 99 90 

## **ITALY – Farnell** 

Tel No: ++ 39 02 93 995 200 Fax No: ++ 39 02 93 995 300 **MALAYSIA – Farnell-Newark** Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 

**SPAIN – Farnell** Tel No: 901 20 20 80 Fax No: 901 20 20 90 **SWEDEN – Farnell** Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 

**BELGIUM – Farnell GERMANY – Farnell – Farnell** Tel No: ++ 32 3 475 2810 Tel No: ++ 49 89 61 39 39 39 Fax No: ++ 32 3 227 3648 Fax No: ++ 49 89 613 59 01 ~~“=~~ **BRAZIL – Farnell-Newark HONG KONGFarnell-Newark –** Tel No: ++ 55 11 4066 9400 Tel No: ++ 852 2268 9888 Fax No: ++ 55 11 4066 9410 Fax No: ++ 852 2268 9899 

**GERMANY – Farnell – Farnell** Tel No: ++ 49 89 61 39 39 39 Fax No: ++ 49 89 613 59 01 

**NETHERLANDS – Farnell** Tel No: ++ 31 30 241 7373 Fax No: ++ 31 30 241 7333 

**NEW ZEALAND – Farnell** Tel No: 0800 90 80 80 Fax No: 0800 90 80 81 

**SWITZERLAND – Farnell** Tel No: ++ 44 204 64 64 Fax No: ++ 44 204 64 54 

**UK – Farnell** Tel No: ++ 44 8701 200 200 Fax No: ++ 44 8701 200 201 

**UK – CPC – CPC CPC** ++ 44 8701 202 530 ++ 44 8701 202 531 

**NORWAY – Farnell – Farnell** Tel No: 800 146 70 Fax No: 800 146 76 **PORTUGAL – Farnell – Farnell** Tel No: ++ 34 93 475 8804 Fax No: ++ 34 93 474 5288 

**CHINA – Farnell-Newark HUNGARY - Farnell NORWAY – Farnell – Farnell UK – CPC – CPC CPC** Tel No: ++86 10 6238 5152 Tel No: ++ 44 870 1200 208 Tel No: 800 146 70 Fax No: ++86 10 6238 5022 Fax No: ++ 44 870 1200 209 Fax No: 800 146 76 06CUC«C= **CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL – Farnell – Farnell USA –  –** Tel No: ++ 44 870 1200 208 Tel No: ++ 44 870 1200 208 Tel No: ++ 34 93 475 8804 **Newark** Fax No: ++ 44 870 1200 209 Fax No: ++ 44 870 1200 209 Fax No: ++ 34 93 474 5288 Tel No: i= = **DENMARK – Farnell IRELAND – Farnell RUSSIA – Farnell EXPORT – Farnell** Tel No: ++ 45 44 53 66 44 Tel No: ++ 353 1 830 9277 Tel No: ++ 44 870 1200 208 Tel No:Fax No: Fax No: ++ 45 44 53 66 06 Fax No: ++ 353 1 830 9016 Fax No: ++ 44 870 1200 209 export Fax No: c= **ESTONIA – Farnell ISRAEL – Farnell SINGAPORE – http://www.farnell.com Farnell-Newark** Tel No: ++ 358 9 560 7780 Tel No: ++ 180 937 0015 Tel No: ++ 65 6788 0200 **http://www.newark.com** Fax No: ++ 358 9 345 5411 = Fax No: ++ 180 937 0014 Fax No: ++ 65 6788 0300 **http://www.cpc.co.uk** 

**USA –  – Newark** Tel No: 800 463 9275 

**EXPORT – Farnell** export Tel No:Fax No: ++ 44 8701 200 208++ 44 8701 200 209 **For enquiries from all other markets** 

**http://www.farnell.com http://www.newark.com** 

**Disclaimer** This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008. ~~ce~~ 

Page <5> 

21/07/08  V1.1