BPSC00131380101M00

Power Inductor (SMD), 100 µH, Shielded, 3.5 A, BPSC Series

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: PULSE ELECTRONICS
Product type: SMD Power Inductors
SVHC: No SVHC (04-Feb-2026)
Inductance: 100µH
Product Range: BPSC Series
Product Width: 12.5mm
Product Height: 8mm
Product Length: 12.5mm
DC Resistance Max: 0.17ohm
RMS Current (Irms): -
Power Inductor Case: 12.5mm x 12.5mm x 8mm
Inductance Tolerance: ± 20%
Inductor Construction: Shielded
Saturation Current (Isat): 3.5A

Delivery and price
Units per pack	4000
Price	0.345 €
Current stock	10+
Lead time	30 days

Datasheet

## **Power Inductor** 

## **BPSC Series** 

## **Overview** 

Power inductors are passive electronic components used in various circuits to store energy in a magnetic field when electrical current flows through them. They are critical in filtering, energy storage, and noise suppression in power electronic systems. 

They are designed to handle higher currents and are optimized for minimal power loss and thermal efficiency. 

## **Benefits** 

1. Ferrite SMD Shielded Type 

2. No thermal aging 

## **Applications** 

1. AP Routers, STBs 

2. LCD TVs and monitors 

3. Game consoles 

4. LED lightings 

5. DC/DC converters 

## **Product Information** 

|**Series**|**L (mm)**|**W(mm)**|**T (mm)**|**Inductance (**µ**H)**|
|---|---|---|---|---|
|BPSC|3.2|3.2|1.55|0.47 ~ 3300|
||3.2|3.2|2.0||
||4.0|4.0|1.2||
||4.0|4.0|1.8||
||4.0|4.0|3.0||
||4.7|4.7|2.0||
||4.7|4.7|3.0||
||4.7|4.7|4.0||
||5.7|5.7|2.0||
||5.7|5.7|3.0||
||6.7|6.7|3.0||
||7.3|7.3|3.4||
||7.0|7.0|4.0||
||7.3|7.3|4.5||
||8.3|8.3|4.5||
||10.3|10.5|3.1||
||10.3|10.5|4||
||10.3|10.5|5.1||
||12.5|12.5|4.5||
||12.5|12.5|6||
||12.5|12.5|8||
||12.0|12.0|10.0||



## **BPSC00131380 Series Specification** 

~~_|~~ **1 Scope:** This specification applies to SMD Shielded Power Inductors 

**==> picture [122 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 [Part Numbering: ]<br>_|<br>**----- End of picture text -----**<br>


**==> picture [66 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
3 Rating:<br>_|<br>**----- End of picture text -----**<br>


Operating Temperature: `－` 40 `℃～＋` 125 `℃ (` Including self temp. rise `)` 

Storage Temperature: `－` 40 `℃～＋` 125 `℃` (For after the circuit board is mounted) Storage Temperature: (on tape & reel): -20°C to +40°C; 75% RH max. **4 Marking:** ~~_|~~ 

|**5 Standard Testing Condition**<br>~~_|~~|**5 Standard Testing Condition**<br>~~_|~~|**5 Standard Testing Condition**<br>~~_|~~|**5 Standard Testing Condition**<br>~~_|~~||
|---|---|---|---|---|
||||Unless otherwise specified|In case of doubt|
|||Temperature|OrdinaryTemperature(15 to 35℃)|20 to 30℃|
|||Humidity|OrdinaryHumidity(25 to 85% RH)|50 to 80 %RH|



## **BPSC00131380 Series Specification** 

**6 Configuration and Dimensions and Unit Weight:** 

## **Net Weight (grms)** 

## **7 Electrical Characteristics:** 

|**Part No.**|**Inductance**|**Test Freq.**|**RDC**|**Isat(A)**|**Irms**|**Tolerance**|**Marking**|
|---|---|---|---|---|---|---|---|
||**(uH)**||**(**Ω**)Max.**|**Max(Typ)**|**(A)Typ.**|||
|BPSC001313801R5□00|1.5|100 kHz,1 V|0.0074|21.6(28.0)|9.5|T|1R5|
|BPSC001313802R2□00|2.2|100 kHz,1 V|0.0089|17.6(24.0)|9|T,N|2R2|
|BPSC001313802R4□00|2.4|100 kHz,1 V|0.0089|17.6(24.0)|9|T,N|2R4|
|BPSC001313803R3□00|3.3|100 kHz,1 V|0.0099|14.6(19.4)|9.5|T,N|3R3|
|BPSC001313803R5□00|3.5|100 kHz,1 V|0.0123|13.8(17.4)|7.7|T,N|3R5|
|BPSC001313804R7□00|4.7|100 kHz,1 V|0.0158|12.3(15.4)|6.8|M,T|4R7|
|BPSC001313806R1□00|6.1|100 kHz,1 V|0.0176|10.9(13.8)|6.6|M,T,N|6R1|
|BPSC001313806R8□00|6.8|100 kHz,1 V|0.018|10.8(13.7)|6.5|M,T|6R8|
|BPSC001313807R6□00|7.6|100 kHz,1 V|0.02|10.0(12.6)|5.9|M,T|7R6|
|BPSC00131380100□00|10|1 kHz,1 V|0.022|8.9(11.2)|5.4|M,T|100|
|BPSC00131380120□00|12|1 kHz,1 V|0.03|7.4(9.4)|4.3|M,T|120|
|BPSC00131380150□00|15|1 kHz,1 V|0.034|7.1(9.0)|4.1|M,T|150|
|BPSC00131380180□00|18|1 kHz,1 V|0.0392|6.5(8.2)|3.9|M,T|180|
|BPSC00131380220□00|22|1 kHz,1 V|0.048|5.8(7.5)|3.2|M,T|220|
|BPSC00131380270□00|27|1 kHz,1 V|0.052|5.3(6.7)|3.1|M,T|270|
|BPSC00131380330□00|33|1 kHz,1 V|0.0648|4.8(6.1)|3|M,T|330|
|BPSC00131380390□00|39|1 kHz,1 V|0.065|3.9(5.6)|3|M,T|390|
|BPSC00131380470□00|47|1 kHz,1 V|0.1|3.6(5.2)|2.5|M,T|470|
|BPSC00131380560□00|56|1 kHz,1 V|0.11|3.4(4.8)|2.35|M,T|560|
|BPSC00131380680□00|68|1 kHz,1 V|0.12|2.8(4.1)|2.3|M,T|680|
|BPSC00131380820□00|82|1 kHz,1 V|0.16|2.7(4.0)|1.95|M,T|820|
|BPSC00131380101□00|100|1 kHz,1 V|0.17|2.5(3.5)|1.9|M,T|101|
|BPSC00131380121□00|120|1 kHz,1 V|0.19|2.2(3.2)|1.8|M,T|121|
|BPSC00131380151□00|150|1 kHz,1 V|0.25|2.0(2.9)|1.6|M,T|151|
|BPSC00131380181□00|180|1 kHz,1 V|0.31|1.8(2.6)|1.37|M,T|181|



**NOTE:** □ **-tolerance  M=±20% / T =±30% / N=+40% -20%** 

1.Operating temperature range －４０℃ ~ １２５℃ (Including self - temperature rise) 

- 2.Isat for Inductance drop 35% from its value without current. 

- 3.Irms for a 40 ℃ °C temperature rise from 25 ℃ °C ambient. 

## ~~ee~~ **BPSC00131380 Series Specification** 

|**Part No.**|**Inductance**|**Test Freq.**|**RDC**|**Isat(A)**|**Irms**|**Tolerance**|**Marking**|
|---|---|---|---|---|---|---|---|
||**(uH)**||**(**Ω**)Max.**|**Max(Typ)**|**(A)Typ.**|||
|BPSC00131380221□00|220|1 kHz,1 V|0.35|1.7(2.4)|1.3|M,T|221|
|BPSC00131380271□00|270|1 kHz,1 V|0.43|1.5(2.2)|1.1|M,T|271|
|BPSC00131380331□00|330|1 kHz,1 V|0.51|1.2(2.0)|1.08|M,T|331|
|BPSC00131380391□00|390|1 kHz,1 V|0.6|1.1(1.6)|0.95|M,T|391|
|BPSC00131380471□00|470|1 kHz,1 V|0.71|0.99(1.6)|0.88|M,T|471|
|BPSC00131380561□00|560|1 kHz,1 V|0.88|0.95(1.4)|0.85|M,T|561|
|BPSC00131380681□00|680|1 kHz,1 V|1.04|0.84(1.2)|0.75|M,T|681|
|BPSC00131380821□00|820|1 kHz,1 V|1.36|0.77(1.1)|0.7|M,T|821|
|BPSC00131380102□00|1000|1 kHz,1 V|1.66|0.73(1.00)|0.59|M,T|102|



## **BPSC00131380 Series Specification** 

**==> picture [143 x 27] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 BPSC00131380 Series<br>8.1 Construction:<br>**----- End of picture text -----**<br>


**==> picture [102 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
  8.2 Material List:<br>**----- End of picture text -----**<br>


## **BPSC00131380 Series Specification** 

## **9 Reliability Of Ferrite Wire Wound Power Inductor 1-1.Mechanical Performance** 

|**No**|**Item**||**Specification**|**Test Method**||
|---|---|---|---|---|---|
|1-1-1|Vibration|Appearance: No damage||Test device shall be soldered on the substrate||
|||Inductance:within±10% of||Oscillation Frequency: 10 to 55 to 10Hz for 1min||
|||initial value|initial value|Amplitude: 1.5mm||
|||||Time: 2hrs for each axis (X, Y & Z), total 6hrs||
|1-1-2|Resistance to Soldering Heat|Appearance: No damage||Pre-heating: 150℃, 1min||
|||||Solder Composition: Sn/Ag3.0/Cu0.5||
|||||Solder Temperature: 260±5℃||
|||||Immersion Time: 10±1sec||
|1-1-3|Solder ability|The electrodes shall be at||Pre-heating: 150℃, 1min||
|||least 95% covered with new|least 95% covered with new|Solder Composition: Sn/Ag3.0/Cu0.5||
|||solder coating||Solder Temperature: 245±5℃||
|||||Immersion Time: 4±1sec||
|1-1-4|Resistance to solvent|There must be no change in||Inductors must withstand 6 minutes of alcohol or water.||
|||appearance or obliteration of||||
|||marking.||||
|**1-2.Environmental Performance**||||||
|**No**|**Item**||**Specification**|**Test Method**||
|1-2-1|Temperature Shock|Appearance: No damage||10 cycles (Air to Air) 1 cycles shall consist of:||
|||Inductance:within±10% of||30 minutes exposure to –55℃||
|||initial value|initial value|30 minutes exposure to 125℃||
|||||15 seconds maximum transition between temperatures||
|1-2-2|Temperature Cycle|||One cycle:||
|||||Step<br>Temperature(℃)|Time(min)|
|||||1<br>-40±3|30|
|||||2<br>25±2|3|
|||||3<br>125±3|30|
|||||4<br>25±2|3|
|||||Total: 100cycles||
|||||Measured after exposure in the room condition for 24hrs||
|1-2-3|Humidity Resistance|||Temperature: 40±2℃||
|||||Relative Humidity: 90 ~ 95%||
|||||Time: 1000hrs||
|||||Measured after exposure in the room condition for 24hrs||
|1-2-4|Heat Life|||Temperature: 85±3℃||
|||||Applied Current: Rated Current||
|||||Time: 1000hrs||
|||||Measured after exposure in the room condition for 24hrs||
|1-2-5|Cold Resistance|||Temperature: -40±3℃||
|||||Time: 1000hrs||
|||||Measured after exposure in the room condition for 24hrs||



## **BPSC00131380 Series Specification** 

## Reflow Soldering Profile 

## **BPSC00131380 Series Specification** 

## ~~_|~~ **10 Packaging: 10.1 Packaging -Cover Tape** 

The force for tearing off cover tape is 10 to 130 grams in the arrow direction. 

## **10.2 Packaging Quantity** 

**==> picture [126 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
10.3 Reel Dimensions<br>**----- End of picture text -----**<br>


## **BPSC00131380 Series Specification** 

**==> picture [209 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 Packaging:<br>10.4 Tape Dimensions in mm<br>**----- End of picture text -----**<br>


**==> picture [186 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
11 Recommended Land Pattern:<br>**----- End of picture text -----**<br>


## **12** 

## **Note:** 

1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 

2. Do not knock nor drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from  such agreement. 

4. Please keep the distance between transformer/coil and other components (refer to the standard IEC 950) 

5. The moisture sensitivity level (MSL) of products is classified as level 1. 

## **BPSC00131380 Series Specification** 

## **13 Graph:** 

BPSC001313801R5□00 

BPSC001313802R2□00 

BPSC001313802R4□00 

BPSC001313803R3□00 

## **BPSC00131380 Series Specification** 

**13 Graph:** BPSC001313803R5□00 

BPSC001313804R7□00 

BPSC001313806R1□00 

BPSC001313806R8□00 

## **BPSC00131380 Series Specification** 

**13 Graph:** BPSC001313807R6□00 

BPSC00131380100□00 

BPSC00131380120□00 

BPSC00131380150□00 

## **BPSC00131380 Series Specification** 

## **13 Graph:** 

BPSC00131380180□00 

## BPSC00131380220□00 

BPSC00131380270□00 

BPSC00131380330□00 

## **BPSC00131380 Series Specification** 

## **13 Graph:** 

BPSC00131380390□00 

BPSC00131380470□00 

BPSC00131380560□00 

BPSC00131380680□00 

## **BPSC00131380 Series Specification** 

## **13 Graph:** 

BPSC00131380820□00 

BPSC00131380101□00 

BPSC00131380121□00 

BPSC00131380151□00 

## **BPSC00131380 Series Specification** 

## **13 Graph:** BPSC00131380181□00 

BPSC00131380221□00 

BPSC00131380271□00 

BPSC00131380331□00 

## **BPSC00131380 Series Specification** 

**13 Graph:** BPSC00131380391□00 

BPSC00131380471□00 

BPSC00131380561□00 

BPSC00131380681□00 

## **BPSC00131380 Series Specification** 

**13 Graph:** BPSC00131380821□00 

BPSC00131380102□00

Updated at June 10, 2026

Pulse Electronics, a YAGEO company, is a global leader in the design and manufacturing of passive electronic components. With a legacy of innovation dating back to 1956, the company provides essential technology for the communications, computing, industrial, transportation, and IoT sectors. Pulse is recognized worldwide for delivering high-performance solutions that power advanced applications, ranging from 5G networks and electric vehicles to data centers and smart grids. The company's extensive product portfolio is heavily anchored in power and networking magnetics. This includes a comprehensive range of power inductors engineered for exceptional efficiency and reliability in demanding environments. To address complex electromagnetic compatibility challenges, Pulse also manufactures highly effective EMC and RFI suppression solutions, such as common mode chokes and filters, alongside specialized toroidal and RF inductors designed to ensure clean power delivery and optimal signal integrity. Beyond traditional magnetics, Pulse excels in the development of advanced wireless and power conversion components. Their connectivity solutions feature a wide array of high-performance RF antennas and single-band chip antennas tailored for modern connected devices. Furthermore, to support sophisticated power architectures, Pulse provides a broad spectrum of transformers—encompassing PCB-mounted designs, current sensing transformers, and precise pulse transformers—equipping engineers with robust, industry-proven components for power isolation and measurement.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →