BF4MC-6GTXRX-B1-1M

**Active O tical Connector p** 

BF4M Series 

**==> picture [220 x 120] intentionally omitted <==**

**----- Start of picture text -----**<br>
Block diagram<br>Electrical input Optical data transmission Electrical output<br>VCSELDriver VCSEL PD TIA +LA<br>BF4 transmitter Optical Fiber BF4 receiver<br>VCSEL : Vertical Cavity Surface Emitting Laser  PD : Photo Diode<br>TIA : Trans  mpedance Amplifier<br>LA :  Limiting Amplifier<br>**----- End of picture text -----**<br>


**==> picture [21 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig.1<br>**----- End of picture text -----**<br>


## **Overview** 

Hirose developed the micro "BF4MC connector" that enables optical transmission of data between boards that are incorporated in devices. 

## **Eye Diagram (Typical) : Transmission speed 6.25 Gbps, Length 5 meters** 

It converts an electrical signal that is received from a board by using the semiconductor component built-in the connector, and transfers the data via optical fiber. BF4MC connector is a revolutionary design that enables easy use of electromagnetic noise-free, insulated, longdistance, high-speed transmission. These are the merits of the optical transmission, mounted inside devices achieving dramatic downsizing and lower power consumption when compared to existing optical products. It can be used in a wide range of applications, medic alappliances Measurement equipments, FA system etc. 

**==> picture [21 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig.2<br>**----- End of picture text -----**<br>


## **Features** 

## **1.  Optical transmissions achieved by simplified electrical connections** 

An easy transmission is accomplished with electronic connectors and has eliminated the need for cleaning the mating faces of traditional fiber optic connectors. 

## **2.  High-speed, signal transmissions with no EMI noise.** 

Optical signal transmissions rated up to 6.25 Gbps are possible. 

Since there is no EMI noise on the signal lines, system design time will be saved. 

## **3.  Highly flexible optical fiber** 

A highly flexible optical fiber is useful for narrow space wiring in the box. 

## **4.  Long-distance, high-speed and high quality signal transmissions** 

The BM4M design is capable of high speed and high quality signal transmissions even over long transmission distances. 

## **5.  Low power consumption** 

**==> picture [79 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
Full-scale<br>5cm<br>Fig.3<br>**----- End of picture text -----**<br>


## **6.  Space-saving and low profile design with 1.5mm height** 

By using the BF4M, optical transmissions can be achieved with small form factor electronic connectors that save on overall size and valuable PCB space. 

Power consumption is significantly reduced compared to conventional optical transceiver. 

**In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.** ~~LT~~ 

**2018.12** ④ 1 

**BF4M Series** ● **Active Optical Connector** 

## **BF4 variations** 

|TYPE|Used image|Product image|
|---|---|---|
|Both ends BF4M<br>(Connection for board to board)|BF4M-TX<br>BF4M-RX||
|One end BF4M, the other conventional<br>optical connector<br>(Connection for box interface)<br>~~ee~~|outside the device<br>Inside the device<br>BF4M<br>~~ee~~|,<br>: :|



## ° **Electrical characteristics of BF4MC-TX (transmitter side)Electrical characteristics** 

|**Electrical characteristics of BF4MC-RX (receiver side)**<br>Miｎ<br>Nominal<br>Max<br>Unit<br>Transmission speed(8B/10B)<br>0.05<br>----------<br>6.25<br>Gbps<br>VDD voltage<br>2.25<br>2.5/3.3<br>3.6<br>V<br>ACTIVATE = H voltage<br>1.0<br>----------<br>VDD voltage<br>V<br>DIN common voltage<br>150<br>----------<br>340<br>mVp<br>DIN differential voltage<br>200<br>----------<br>1400<br>mVp<br>Miｎ<br>Nominal<br>Max<br>Unit<br>Remarks<br>Transmission speed(8B/10B)<br>0.05<br>----------<br>6.25<br>Gbps<br>----------<br>VDD voltage<br>2.25<br>2.5/3.3<br>3.6<br>V<br>----------<br>VDD 15 voltage<br>1.45<br>1.5<br>1.55<br>V<br>When drivingwith dualpower sources<br>DOUT common voltage<br>160<br>----------<br>330<br>mVp<br>----------<br>DOUT differential voltage<br>160<br>----------<br>330<br>mVp<br>----------<br>SD = H voltage<br>1.0<br>1.5<br>1.6<br>V<br>----------<br>Imon<br>20.0<br>----------<br>----------<br>uA<br>For internal inspection<br>~~————————~~<br>~~es~~<br>~~ee~~<br>~~SSS~~|
|---|



## **<Pin Assignment>** 

## **BF4MC-TX Plug** 

## **BF4MC-RX Plug** 

**==> picture [235 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fiber Fiber<br>GND 1 20 GND GND 1 20 GND<br>GND 2 19 GND GND 2 19 GND<br>GND 3 18 GND GND 3 18 GND<br>VDD 4 17 ACTIVE Imon 4 17 EN<br>GND 5 16 NC SD 5 16 NC<br>FILT 6 15 NC VDD 6 15 VDD15<br>GND 7 14 GND GND 7 14 GND<br>DIN+ 8 13 DIN- DOUT- 8 13 DOUT+<br>GND 9 12 GND GND 9 12 GND<br>GND 10 11 GND GND 10 11 GND<br>Top View<br>**----- End of picture text -----**<br>


## **<Pin Functions>** 

## **Descriptions of BF4MC-TX pins** 

|Synbol|Name|Type|Details|
|---|---|---|---|
|VDD|Vsupply|Power|Power SupplyDC+2.5 or +3.3V|
|GND|Ground|Ground|-------|
|ACTIVE|Activate|Input|H voltage : Active mode<br>L voltage : Sleep mode|
|FILT|Filter|-------|Decouping capacitor connection contact|
|DIN+|Data input +|Input|Decouping capacitor connection contact<br>Differential Data Input|
|DIN–|Data input –|Input||
|NC|Not Connect|-------|Not connected in normal operation|



## **Descriptions of BF4MC-RX pins** 

|Synbol|Name|Type|Details|
|---|---|---|---|
|VDD|Vsupply|Power|Power for PD(*)|
|VDD15|Vdd1.5V|Power|Power for Core(*)|
|GND|Ground|Ground|-------|
|SD|Signal Detect|Output|H voltage:Detected<br>L voltage:Undetected|
|DOUT+|Data Output +|Output|Differential Data Output|
|DOUT–|Data Output –|Output||
|EN|Regulator Enable|Input|[Dual supply mode]<br>Not connected<br>[Single supply mode]<br>EN pin must be connect to VDD|
|Imon|Mirrored photodiode<br>current monitor|Output|Not connected(Inspection pin)|
|NC|Not Connect|-------|Not connected in normal operation|



(*): For details, see Hirose's technical specifi cation ETAD-K0671. 

2 

**BF4M Series** ● **Active Optical Connector** 

## **Product Materials** 

## **Plug harnesses** 

|Component|Component|Materials|
|---|---|---|
|Transmitter plug (TX)|Housing|LCP(White)|
||Contact|Phosphor bronze(Auplating)|
||Plate|Phosphor bronze(Niplating)|
||VCSEL|GaAs|
||VCSEL driver|Si(CMOS)|
||Bondingwire|Au|
||Sealingresin|Epoxyresin|
||Heat shrink tubing|Polyolefi n(Black)|
||ESD cap|Elastomer(Black)|
|Receiver plug (RX)|Housing|LCP(White)|
||Contact|Phosphor bronze(Auplating)|
||Plate|Phosphor bronze(Niplating)|
||PD|GaAs|
||TIA / LA|Si(CMOS)|
||Bondingwire|Au|
||Sealingresin|Epoxyresin|
||Heat shrink tubing|Polyolefi n(Black)|
||ESD cap|Elastomer(Black)|
|Optical fi ber|Fiber|Silicaglass(GI-50/80)|
||Coating|UV curable resin / Thermoplastic resin(Ø0.5)|
|SC connector|Housing|PBT(Blue)|
||Boot|Elastomer(Blue)|
||Spring|Stainless steel|
||Ferrule|ZrO2|
||Ferrule fl ange|Stainless steel|
||Cap|Elastomer(Black)|
|LC connector|Housing|PEI(Beige)|
||Boot|Elastomer(White)|
||Spring|Stainless steel|
||Ferrule|ZrO2|
||Ferrule fl ange|Brass|
||Cap|PP (Black)|



## **Receptacles** 

## ■ **Product Number Structure** 

Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. 

**Plug harness** 

## **- - - BF4M C 6G TX RX B1 75MM** 

❶ ❷ ❸ ❹ ❺ ❻ ❶Series ❷Identification of Bit rate C-6G : 0.05 to 6.25 Gbps ❸❹Type of plug that attaches to both ends of the harness TX : BF4 Transmitter plugx SC : SC connector RX : BF4 Receiver plug LC : LC connector ❺Type of fiber cable B1 : diameter Ø0.5, Red B2 : diameter Ø0.5, Blue ❻Identification of the length of the fiber cable *Cable length less than 1m ⇒ The end of the product  Cable length less than 1m ⇒ The end of the product  ⇒ The end of the product   The end of the product name·**MM(Millimeter) *Cable length 1m or more ⇒ The end of the product name·**M(Meter) 

- *Cable length less than 1m ⇒ The end of the product  Cable length less than 1m ⇒ The end of the product  ⇒ The end of the product   The end of the product name·**MM(Millimeter) 

## **Receptacle** 

## **- - - BF4 TX 14 DS 0.5 V** ( **01** ) 

❶ ❷ ❸ ❹ ❺ ❻ ❼ ❶Series 

❷Identification of the Transmitter and Receiver TX : Transmitter RX : Receiver ❸Number of Electrical terminal pin 14 pin 

❹Identification of Socket shape Socket(S) of Double line assignment pins(D) ❺Identification of the electric terminal pitch 0.5mm 

❻Identification of the mating method V：Vertical mated to the mounting surface ❼Packing specifications None：500 pcs/reel (01)：1000 pcs/reel (02)：2000 pcs/reel (10)：10 pcs/pack (11)：100 pcs/reel 

3 

**BF4M Series** ● **Active Optical Connector** 

## **Connection example of +3.3 V (single power supply mode)** 

## **Product Appearance and HRS No.** 

## **Plug harness** 

**==> picture [236 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
L<br>9.82 （6） （6） 9.82<br>Identification mark Identification mark<br>for TX side for RX side<br>）<br>3.1 0.5 3.1<br>（φ<br>1.3 .451 1.45 1.3<br>**----- End of picture text -----**<br>


4 

**BF4M Series** ● **Active Optical Connector** 

## **BF4MC harness** 

|Part No.|HRS No.|Fiber|Cable length L|
|---|---|---|---|
|BF4MC-6GTXRX-B1-45MM|831-1102-0 04|Ø0.5 Red|45mm|
|BF4MC-6GTXRX-B1-50MM|831-1102-0 05||50mm|
|BF4MC-6GTXRX-B1-55MM|831-1102-0 06||55mm|
|BF4MC-6GTXRX-B1-60MM|831-1102-0 07||60mm|
|BF4MC-6GTXRX-B1-65MM|831-1102-0 08||65mm|
|BF4MC-6GTXRX-B1-70MM|831-1102-0 09||70mm|
|BF4MC-6GTXRX-B1-75MM|831-1102-0||75mm|
|BF4MC-6GTXRX-B1-80MM|831-1102-0 11||80mm|
|BF4MC-6GTXRX-B1-85MM|831-1102-0 12||85mm|
|BF4MC-6GTXRX-B1-90MM|831-1102-0 13||90mm|
|BF4MC-6GTXRX-B1-95MM|831-1102-0 14||95mm|
|BF4MC-6GTXRX-B1-100MM|831-1102-0 15||100mm|
|BF4MC-6GTXRX-B1-1M|831-1109-9||1m|
|BF4MC-6GTXRX-B1-2M|831-1109-9 01||2m|
|BF4MC-6GTXRX-B1-3M|831-1109-9 02||3m|
|BF4MC-6GTXRX-B1-4M|831-1109-9 03||4m|
|BF4MC-6GTXRX-B1-5M|831-1109-9 04||5m|



Length (L) of the harness 

- The shortest harness length is 45mm, and the harness up to 100mm in length is available in 5mm increments. (45mm, 50mm, 55mm …, 100mm) 

**==> picture [483 x 460] intentionally omitted <==**

**----- Start of picture text -----**<br>
·  Harness longer than those listed above is also available upon request. Please inform us of your desired harness length.<br>·  Blue Fiber color is also available. Contact Hirose sales representative for details.<br>Ｌ<br>9.82 （6） 25<br>（33）<br>BF4MC Plug SC Connector<br>y<br>— _<br>> ES<br>●BF4MC - SC Connector harness<br>Part No. HRS No. Fiber Length TX or RX<br>BF4MC-6GTXSC-B1-100MM 831-1111-0 100mm TX<br>Ø0.5 Red<br>ee BF4MC-6GRXSC-B1-100MM 831-1112-0 100mm RX<br>The shortest harness length is 100mm.<br>· Please use the transmit and receive BF4MC connectors together.<br>· Harness longer than those listed above is also available upon request. Please inform us of your desired harness length.<br>· Blue fi ber color is also available.<br>Ｌ<br>9.82 （6） （17）（13.2）<br>a BF4MC Plug LC Connector<br>●BF4MC - LC Connector harness<br>Part No. HRS No. Fiber Length TX or RX<br>BF4MC-6GTXLC-B1-100MM 831-1114-0 100mm TX<br>Ø0.5 Red<br>ee The shortest harness length is 100 mm.BF4MC-6GRXLC-B1-100MM 831-1135-0 ee 100mm RX<br>）<br>.13 0.5Ø ）<br>（ 9<br>（<br>）<br>1.3 1.45 7.4<br>（<br>） ）<br>3.1 （0.5Ø （4.5<br>）<br>1.3 1.45 4.5<br>（<br>**----- End of picture text -----**<br>


- Please use the transmit and receive BF4MC connectors together. 

- Harness longer than those listed above is also available upon request. Please inform us of your desired harness length. 

5 

**BF4M Series** ● **Active Optical Connector** 

## **Receptacle: Transmitter (TX)** 

**==> picture [454 x 264] intentionally omitted <==**

**----- Start of picture text -----**<br>
10.25<br>9.5<br>3<br>P=0.5±0.05 (2.05)<br>_+— —<br>Vacuum 3mm<br>pick up area<br>Vacuum<br>2.1mm<br>pick up area<br>(0.25) (1.75)<br>sia _<br>·  The structure is designed so that the receiver (RX)<br>Part No. HRS No. Package specifi cations<br>BF4-TX-14DS-0.5V 831-0008-6 500 pcs/reel<br>BF4-TX-14DS-0.5V(01) 831-0008-6 01 1000 pcs/reel<br>BF4-TX-14DS-0.5V(02) 831-0008-6 02 2000 pcs/reel<br>BF4-TX-14DS-0.5V(10) 831-0008-6 10 10 pcs/pack<br>BF4-TX-14DS-0.5V(11) 831-0008-6 11 100 pcs/reel<br>5.43 4.95<br>1.48±0.1<br>**----- End of picture text -----**<br>


- The structure is designed so that the receiver (RX) plug does not mate. 

## **Receptacle: Receiver (RX)** 

**==> picture [280 x 184] intentionally omitted <==**

**----- Start of picture text -----**<br>
10.25<br>9.5<br>3<br>P=0.5±0.05 (1.75)<br>tt =<br>Vacuum 3mm<br>pick up area<br>Vacuum<br>2.1mm<br>| ry C77 LI L T pick up area<br>(0.25) (2.05)<br>ca a<br>5.43 4.95<br>1.48±0.1<br>**----- End of picture text -----**<br>


- The structure is designed so that the transmitter (TX) plug does not mate. 

|Part No.|HRS No.<br>Package sp|
|---|---|
|BF4-RX-14DS-0.5V|831-0009-9<br>500p|
|BF4-RX-14DS-0.5V(01)|831-0009-9 01<br>1000|
|BF4-RX-14DS-0.5V(02)|831-0009-9 02<br>2000|
|BF4-RX-14DS-0.5V(10)|831-0009-9 10<br>10pcs/|
|BF4-RX-14DS-0.5V(11)|831-0009-9 11<br>100 pcs/reel|



## **Receptacle:Pattern Layout** 

**==> picture [453 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
Recommended PCB land pattern dimensions Recommended stencil dimensions<br>- 5.6 5.7 120 ym)<br>4.5 3.8 — (Stencil thickness<br>eee ies = Sst 2<br>Se “4 (2 c! yes es<br>0.3 1.4 0.26 1.4<br>The hatched areas in Figure 2.4(A) are close to metal<br>1 P=0.5 0.9 shell, and there is a possibility of a short circuit. Make  1 P=0.5 0.9 Apeture ratio<br>3 1.2 sure not to locate a via hole without a solder resist. 3 1.2   Pads for contacts : 70%<br>4.9 3.65 4.9 3.65 （   Pads for shell : 100% ）<br>6.4 5.4 4 1.9 1.9 4.4 5.4 6.4 5.4 4.4 4.46 4.4 5.4<br>**----- End of picture text -----**<br>


6 

**BF4M Series** ● **Active Optical Connector** 

## **Packaging Specifications for the receptacles** 

**==> picture [425 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reel dimensions Emboss carrier tape dimensions<br>t=0.3±0.05<br>29.5±1 A<br>2±0.5<br>25.5±0.5<br>Ø1.5 sprocket hole<br>near side<br>2±0.1 P=4±0.1 1.6±0.1<br>P=12±0.1 A-A<br>A<br>＋0.1<br>Ø1.5    0<br>Ø21±0.8 Ø13±0.2<br>120° 120°<br>(5.25)<br>(11) TX TX 5.5±0.1 24±0.3<br>±2 ±1<br>Ø330 Ø80 (6) 11.5±0.1<br>1.75±0.1<br>**----- End of picture text -----**<br>


## **Recommended refl ow temperature profi le (lead-free solder)** 

**==> picture [406 x 302] intentionally omitted <==**

**----- Start of picture text -----**<br>
Recommended reflow temperature profile (lead-free solder)<br>MAX 250℃<br>Reflow cycle : 2 cycle Max.<br>250<br>220 220ç<br>180ç<br>180<br>150 150ç<br>100<br>25<br>Time(sec)<br>0 Preheat time Soldering time<br>(６０sec) ９０ to １２０sec ６０ sec MAX.<br>ial<br>Extraction tool （6） （4.4）<br>TT<br>[) (]<br>Part No. HRS No. Packing specifications<br>BF4-T2 831-0006-0 1 piece （2.6）<br>φ2<br>φ2<br>Temperature(ç)<br>T2BF4- ）40<br>（<br>**----- End of picture text -----**<br>


## **Test board** 

PCBs for testing and evaluation are available. Please contact us for more information. |e “@ = an > BF4M High Speed BF4M High Speed Transmission Board : TX2 Transmission Board : RX2 

## **Connector Mating Method** 

Metal plate (silver) shall be on bottom surface during mating process. Metal exposed area (gold, ( Ss triangle) shall be on top surface during mating process. **Do not mate the connector while power is being supplied** eh ~~ee~~ Make sure to insert or remove the plug after the power supply is turned off. Hot plugging/unplugging may cause damage. 

7 

**BF4M Series** ● **Active Optical Connector** 

## **Cautions** 

Do not pull the fiber when removing the connector. 

When removing the connector, make sure to hook the plug with an extraction tool so that the stress is not applied to the cable. Pulling the cable to remove it may cause a breakage in the cable 

## Unmating tool 

**Do not remove the plug while power is being supplied.** Make sure to remove the plug after the power supply is stopped. Hot plugging / unplugging may cause damage. Se Ce ~~——_____—~~ Ne, 

## **Notes on handling of the product** 

## **(Notes on change of information)** 

- The content of this document including the information regarding the connector (hereafter, the Product) is subject to change without prior notice. 

## **(Prohibition of reproduction)** 

- No part of this document may be copied or reproduced without prior written consent of Hirose Electric Co., Ltd. (hereafter, Hirose). Even if written consent of Hirose is obtained, it is prohibited to amend any part of this document and copy or reproduce it. Hirose shall assume no obligation or liability in connection with such amended information or reproduction. 

## **(Responsibilities for design safety)** 

- Hirose shall assume no responsibilities for the support for the application of the Product or the product design of the customer. The customer shall be responsible for the product and application of the customer in which the Product is used. The customer shall take appropriate design and operational safety measures in order to minimize the potential risks predicted for the product and application of the customer in which the Product is used. 

## **(Responsibilities for determination of the suitability)** 

- When using the Product, the customer shall ensure safe design at his/her own responsibility so that malfunction or failure of the Product would never cause an infringement on the life, body or property. For design or use of the Product, make sure to refer to the materials (including the catalog, specifications, and design note) and follow the same. When using information including the product data provided in the document, technical data or circuit examples shown in the figures and tables, the customer shall evaluate the information on the customer’s product and determine the suitability at the customer’s own responsibility. 

## **(Responsibilities for specific applications)** 

- Make sure to consult with our sales representative in advance when considering of use for specific applications that require extremely high quality and reliability (e.g. nuclear equipment, aerospace systems, transportation equipment and various safety related equipment). 

## **(Prohibition of replication)** 

- Do not disassemble reverse-engineer, modify, analyze or replicate the Product. 

## **(Prohibition of application to prohibited products)** 

- The Product must not be used for any product that manufacture, use and sale of which is prohibited by the domestic or international laws, regulations and ordinances. 

**(Notes on the guarantee and license)** 

- The technical data provided in the materials of the Product is intended to describe the representative behaviors and application of the Product. It is not to guarantee the intellectual property rights or any other rights of Hirose nor a third party and not to grant the license. 

## **(Notes on the warranties for the contract)** 

- Unless otherwise provided in a written contract or other documents (specifications) agreed between the customer and Hirose, Hirose makes no warranties of any kind (including, but not limited to, warranties of the function and operation, warranties of merchantability, warranties of suitability for a specific application or purpose and warranties of correctness of the information). 

- **(Prohibition of weapons of mass destruction and military purposes)** •  It is prohibited to use the Product or the technical information contained in this document for any military purposes, including but not limited to, development of weapons of mass destruction. 

## **(Notes on export)** 

- To export the Product to other countries, the exporter shall conduct the applicability determination based on Foreign Exchange and Foreign Trade Act of Japan. If you wish to have the applicability determination sheet issued by Hirose, contact our sales representative. Note that in the export arrangement, the customer shall be an exporter and responsible for compliance with all the applicable laws and regulations and terms and conditions of the agreement with Hirose. 

## **Notes on use of the product** 

## **(Notes on the specification range)** 

- Using the Product under conditions beyond the specification range (for voltage, current and temperature) provided in this document may result in an accident (including ignition, heat generation, and smoking). Confirm the document thoroughly and make sure to use the Product within the specification range. 

**(Notes on the laser)** 

- The laser beam is emitted from the end-face of the optical fiber in operation. It may cause eye injury or loss of sight if it enters the eyes. Do not stare directly into the end-face of the optical fiber. The laser beam is emitted from the VCSEL in operation. It may not be visible depending on its wavelength, but nonetheless it may cause eye injury or loss of sight if the laser beam or its reflected beam enters the eyes. Do not stare (look into) the laser beam directly. 

## **(Notes on fracture of the optical fiber)** 

- In case of fracture of the optical fiber used in the Product, turn off the power immediately. 

In addition, Use care when handling it to avoid injury from fractured parts or fragments. 

**(Notes on use of GaAs)** 

- The Product is equipped with a semiconductor within the connector and contains gallium arsenide (GaAs). 

## **(Notes on the environment including gases)** 

- Avoid the use of the Product in gas environments with chlorides or sulfides. The Product may deteriorate and features may be affected. 

**(Notes on storage)** 

- Store the Product out of corrosive substances, corrosive gases, high temperature and humidity or direct sunlight. Do not apply excessive pressure or vibration to the Product. It may cause deterioration, deformation, damage or failure of the Product. 

## **(Notes on resin molded part)** 

- The resin molded part of the Product may contain black spots or its color may be slightly different, but that has no effect on the product performance. 

**==> picture [390 x 48] intentionally omitted <==**

**----- Start of picture text -----**<br>
f | J H ® IROSE ELECTRIC CO. , LTD .<br>**----- End of picture text -----**<br>


**2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL:[+] 81-45-620-3526  Fax:[+] 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com** 

The characteristics and the specifications contained herein are for reference purpose.  Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 12/2018. Contents are subject to change without notice for the purpose of improvements. 

8