AQZ404

## PhotoMOS 

## Power SIL4 W3.5 mm 1 Form A 

## Product Catalog 

"     ", " PhotoMOS " and " PHOTOMOS " are registered trademarks of Panasonic Holdings Corporation. Recognized in Japan, the United States, all member states of European Union and the other countries. 

**==> picture [503 x 408] intentionally omitted <==**

2026.1 

## PhotoMOS 

## Power SIL4 W3.5 mm 1 Form A 

## High capacity up to Max. 6 A in the series with a slim SIL package 

## ~~ee~~ FEATURES 

**==> picture [181 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.5<br>21<br>12.5<br># (Height includes standoff)<br>1 2 3 ｰ 4 + 1 2 3 4<br>DC type AC/DC type<br>(Unit: mm)<br>**----- End of picture text -----**<br>


- ●Slim SIL 4-pin package 

- ●Load voltage:  60 V, 100 V, 200 V, 400 V and 600 V 

- ●Continuous load currnt: 6 A ( AQZ202G ) 

## ~~ee~~ TYPICAL APPLICATIONS 

- ●Measuring instruments 

- ●Power equipment 

- ●Industrial machines 

- ●Mercury relay replacement 

Note)  This product is not for automotive use. Please contact our sales representative for automotive applications. 

## TYPES ee 

- ●Standard type 

|Category|Output rating*|Output rating*|Part No.|Packing quantity|Packing quantity|
|---|---|---|---|---|---|
||Load voltage|Load current||Inner carton ( 1-tube )|Outer carton|
|DC only|60 V|4.0 A|AQZ102|25 pcs.|500 pcs.|
||100 V|2.6 A|AQZ105|||
||200 V|1.3 A|AQZ107|||
||400 V|0.7 A|AQZ104|||
|AC/DC dual<br>use|60 V|3.0 A|AQZ202|||
||100 V|2.0 A|AQZ205|||
||200 V|1.0 A|AQZ207|||
||400 V|0.5 A|AQZ204|||



Note) Please refer to the " Cautions for use " regarding the recommended operation load voltage. 

- Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC. 

- ●High capacity type 

|Category|Output rating*|Output rating*|Part No.|Packing quantity|Packing quantity|
|---|---|---|---|---|---|
||Load voltage|Load current||Inner carton ( 1-tube )|Outer carton|
|AC/DC dual<br>use|60 V|6.0 A|AQZ202G|25 pcs.|500 pcs.|
||100 V|4.0 A|AQZ205G|||
||200 V|2.0 A|AQZ207G|||
||600 V|1.0 A|AQZ206G2|||



Note) Please refer to the " Cautions for use " regarding the recommended operation load voltage. 

- Indicate the peak AC and DC values. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 1 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## RATING 

- ■Absolute maximum ratings ( Ambient temperature: 25 ℃ ) 

## ●Standard type ( DC only ) 

**==> picture [511 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol AQZ102 AQZ105 AQZ107 AQZ104 Remarks<br>LED forward current IF 50 mA<br>LED reverse voltage VR 5 V<br>f ＝ 100 Hz,<br>Peak forward current IFP 1 A<br>Duty Ratio ＝ 0.1 %<br>Power dissipation Pin 75 mW<br>Load voltage ( DC ) VL 60 V 100 V 200 V 400 V<br>Continuous load current ( DC ) IL 4.0 A 2.6 A 1.3 A 0.7 A<br>Peak load current Ipeak 9.0 A 6.0 A 3.0 A 1.5 A 100 ms ( 1 shot ) ,<br>VL ＝ DC<br>Power dissipation Pout 1.35 W<br>Total power dissipation PT 1.35 W<br>I/O isolation voltage Viso 2,500 V rms<br>Ambient temperature ( Operating )  Topr ―40 to ＋ 85 ℃  ( Avoid icing and condensation )<br>Ambient temperature ( Storage ) Tstg ―40 to ＋100 ℃<br>Junction temperature Tj 125 ℃<br>Input<br>Output<br>**----- End of picture text -----**<br>


## ●Standard type ( AC/DC dual use ) 

**==> picture [511 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol AQZ202 AQZ205 AQZ207 AQZ204 Remarks<br>LED forward current IF 50 mA<br>LED reverse voltage VR 5 V<br>f ＝ 100 Hz,<br>Peak forward current IFP 1 A<br>Duty Ratio ＝ 0.1 %<br>Power dissipation Pin 75 mW<br>Load voltage ( peak AC ) VL 60 V 100 V 200 V 400 V<br>Continuous load current IL 3.0 A 2.0 A 1.0 A 0.5 A Peak AC, DC<br>Peak load current Ipeak 9.0 A 6.0 A 3.0 A 1.5 A 100 ms ( 1 shot ) ,<br>VL ＝ DC<br>Power dissipation Pout 1.6 W<br>Total power dissipation PT 1.6 W<br>I/O isolation voltage Viso 2,500 V rms<br>Ambient temperature ( Operating )  Topr ―40 to ＋ 85 ℃  ( Avoid icing and condensation )<br>Ambient temperature ( Storage ) Tstg ―40 to ＋100 ℃<br>Junction temperature Tj 125 ℃<br>Input<br>Output<br>**----- End of picture text -----**<br>


## ●High capacity type 

**==> picture [511 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol AQZ202G AQZ205G AQZ207G AQZ206G2 Remarks<br>LED forward current IF 50 mA<br>LED reverse voltage VR 5 V<br>f ＝ 100 Hz,<br>Peak forward current IFP 1 A<br>Duty Ratio ＝ 0.1 %<br>Power dissipation Pin 75 mW<br>Load voltage VL 60 V 100 V 200 V 600 V<br>Continuous load current IL 6.0 A 4.0 A 2.0 A 1.0 A Peak AC, DC<br>Peak load current Ipeak 12.0 A 8.0 A 6.0 A 3.0 A 100 ms ( 1 shot ) ,<br>VL ＝ DC<br>Power dissipation Pout 1.6 W<br>Total power dissipation PT 1.6 W<br>I/O isolation voltage Viso 2,500 V rms<br>Ambient temperature ( Operating )  Topr ―40 to ＋ 85 ℃  ( Avoid icing and<br>condensation )<br>Ambient temperature ( Storage ) Tstg ―40 to ＋100 ℃<br>Junction temperature Tj 125 ℃<br>Input<br>Output<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

> Panasonic Industry Co., Ltd. 2026 ASCTB467E   202601 

ー 2 ー 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## ■Electrical characteristics ( Ambient temperature: 25 ℃ ) 

## ●Standard type ( DC type ) 

**==> picture [511 x 312] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol AQZ102 AQZ105 AQZ107 AQZ104 Condition<br>LED operate  Typical IFon 1.0 mA IL ＝ 100 mA<br>current Maximum 3.0 mA VL ＝ 10 V<br>LED turn off  Minimum 0.4 mA IL ＝ 100 mA<br>IFoff<br>current Typical 0.9 mA VL ＝ 10 V<br>LED dropout  Typical VF 1.25 V ( 1.16 V at IF ＝ 10 mA )  IF ＝ 50 mA<br>voltage Maximum 1.5 V<br>Typical 0.05 Ω 0.081 Ω 0.34 Ω 1.06 Ω IF ＝ 10 mA<br>On resistance Ron IL ＝ Max.<br>Maximum 0.09 Ω 0.17 Ω 0.55 Ω 1.6 Ω Within 1 s<br>Off state  IF ＝ 0 mA<br>leakage current Maximum ILeak 10 µA VL ＝ Max.<br>Typical 1.66 ms 1.89 ms 0.83 ms 1.01 ms IF ＝ 10 mA<br>IL ＝ 100 mA<br>Maximum 5.0 ms VL ＝ 10 V<br>Turn on time* Ton<br>Typical 3.79 ms 4.50 ms 1.75 ms 2.34 ms IF ＝ 5 mA<br>IL ＝ 100 mA<br>Maximum 10.0 ms VL ＝ 10 V<br>Typical 0.15 ms 0.19 ms 0.08 ms 0.08 ms IF ＝ 5 mA or 10 mA<br>Turn off time* Toff IL ＝ 100 mA<br>Maximum 3.0 ms VL ＝ 10 V<br>Typical 0.8 pF f ＝ 1 MHz<br>I/O capacitance Maximum Ciso 1.5 pF VB ＝ 0 V<br>Initial I/O<br>isolation Minimum Riso 1,000 MΩ 500 V DC<br>resistance<br>IF ＝ 10 mA<br>Max. operating frequency Maximum ― 0.5 cps duty ＝ 50 % IL ＝ Max.<br>VL ＝ Max.<br>Input<br>Output<br>Transfer characteristics<br>**----- End of picture text -----**<br>


*Turn on/Turn off time 

|Input<br>Output<br>Ton|Input<br>Output<br>Ton|Input<br>Output<br>Ton|||||
|---|---|---|---|---|---|---|
||||||||
||||||90%<br>10%<br>�o�||
||||||||
||||||||
||Ton|||||�o�|



Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 3 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## ●Standard type ( AC/DC type ) 

**==> picture [511 x 312] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol AQZ202 AQZ205 AQZ207 AQZ204 Condition<br>LED operate  Typical IFon 1.0 mA IL ＝ 100 mA<br>current Maximum 3.0 mA VL ＝ 10 V<br>LED turn off  Minimum 0.4 mA IL ＝ 100 mA<br>IFoff<br>current Typical 0.9 mA VL ＝ 10 V<br>LED dropout  Typical VF 1.25 V ( 1.16 V at IF ＝ 10 mA )  IF ＝ 50 mA<br>voltage Maximum 1.5 V<br>Typical 0.11 Ω 0.23 Ω 0.7 Ω 2.1 Ω IF ＝ 10 mA<br>On resistance Ron IL ＝ Max.<br>Maximum 0.18 Ω 0.34 Ω 1.1 Ω 3.2 Ω Within 1 s<br>Off state  IF ＝ 0 mA<br>leakage current Maximum ILeak 10 µA VL ＝ Max.<br>Typical 2.46 ms 2.40 ms 1.12 ms 1.65 ms IF ＝ 10 mA<br>IL ＝ 100 mA<br>Maximum 5.0 ms VL ＝ 10 V<br>Turn on time* Ton<br>Typical 5.64 ms 5.65 ms 2.57 ms 3.88 ms IF ＝ 5 mA<br>IL ＝ 100 mA<br>Maximum 10.0 ms VL ＝ 10 V<br>Typical 0.22 ms 0.21 ms 0.10 ms 0.08 ms IF ＝ 5 mA or 10 mA<br>Turn off time* Toff IL ＝ 100 mA<br>Maximum 3.0 ms VL ＝ 10 V<br>Typical 0.8 pF f ＝ 1 MHz<br>I/O capacitance Maximum Ciso 1.5 pF VB ＝ 0 V<br>Initial I/O<br>isolation Minimum Riso 1,000 MΩ 500 V DC<br>resistance<br>IF ＝ 10 mA<br>Max. operating frequency Maximum ― 0.5 cps duty ＝ 50 % IL ＝ Max.<br>VL ＝ Max.<br>Input<br>Output<br>Transfer characteristics<br>**----- End of picture text -----**<br>


*Turn on/Turn off time 

**==> picture [178 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>90%<br>10%<br>Output<br>Ton To�<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 4 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## ●High capacity type 

**==> picture [511 x 283] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol AQZ202G AQZ205G AQZ207G AQZ206G2 Condition<br>LED operate  Typical IFon 1.0 mA IL ＝ 100 mA<br>current Maximum 3.0 mA VL ＝ 10 V<br>LED turn off  Minimum 0.2 mA IL ＝ 100 mA<br>IFoff<br>current Typical 0.9 mA VL ＝ 10 V<br>LED dropout  Typical VF 1.25 V ( 1.16 V at IF ＝ 10 mA )  IF ＝ 50 mA<br>voltage Maximum 1.5 V<br>Typical 0.015 Ω 0.035 Ω 0.18 Ω 0.52 Ω IF ＝ 10 mA<br>On resistance Ron IL ＝ Max.<br>Maximum 0.03 Ω 0.06 Ω 0.35 Ω 0.8 Ω Within 1 s<br>Off state  IF ＝ 0 mA<br>leakage current Maximum ILeak 10 µA VL ＝ Max.<br>Typical 3.8 ms 5.0 ms 2.5 ms 3.0 ms IF ＝ 10 mA<br>Turn on time* Ton IL ＝ 100 mA<br>Maximum 10 ms VL ＝ 10 V<br>Typical 0.2 ms 0.3 ms 0.2 ms IF ＝ 10 mA<br>Turn off time* Toff IL ＝ 100 mA<br>Maximum 3.0 ms VL ＝ 10 V<br>Typical 0.8 pF f ＝ 1 MHz<br>I/O capacitance Maximum Ciso 1.5 pF VB ＝ 0 V<br>Initial I/O<br>isolation Minimum Riso 1,000 MΩ 500 V DC<br>resistance<br>IF ＝ 10 mA<br>Max. operating frequency Maximum ― 0.5 cps duty ＝ 50 % IL ＝ Max.<br>VL ＝ Max.<br>Input<br>Output<br>Transfer characteristics<br>**----- End of picture text -----**<br>


*Turn on/Turn off time 

**==> picture [178 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>90%<br>10%<br>Output<br>Ton To�<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

Panasonic Industry Co., Ltd. 2026 

ー 5 ー 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

■Recommended operating conditions ( Ambient temperature: 25 ℃ ) Please use under recommended operating conditions to obtain expected characteristics. 

## ●Standard type ( DC and DC/AC type ) 

**==> picture [369 x 209] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol Min. Max. Unit<br>LED current IF 5 30 mA<br>Load voltage ( Peak AC ) VL ー 48 V<br>AQZ102 Continuous load current IL ー 4.0  A<br>Load voltage ( Peak AC ) VL ー 80 V<br>AQZ105 Continuous load current IL ー 2.6 A<br>Load voltage ( Peak AC ) VL ー 160 V<br>AQZ107 Continuous load current IL ー 1.3 A<br>Load voltage ( Peak AC ) VL ー 320 V<br>AQZ104 Continuous load current IL ー 0.7 A<br>Load voltage ( Peak AC ) VL ー 48 V<br>AQZ202 Continuous load current IL ー 3.0  A<br>Load voltage ( Peak AC ) VL ー 80 V<br>AQZ205 Continuous load current IL ー 2.0  A<br>Load voltage ( Peak AC ) VL ー 160 V<br>AQZ207 Continuous load current IL ー 1.0  A<br>Load voltage ( Peak AC ) VL ー 320 V<br>AQZ204 Continuous load current IL ー 0.5 A<br>**----- End of picture text -----**<br>


## ●High capacity type 

**==> picture [369 x 117] intentionally omitted <==**

**----- Start of picture text -----**<br>
Item Symbol Min. Max. Unit<br>LED current IF 10 30 mA<br>Load voltage ( Peak AC ) VL ー 48 V<br>AQZ202G Continuous load current IL ー 6.0  A<br>Load voltage ( Peak AC ) VL ー 80 V<br>AQZ205G Continuous load current IL ー 4.0  A<br>Load voltage ( Peak AC ) VL ー 160 V<br>AQZ207G Continuous load current IL ー 2.0  A<br>Load voltage ( Peak AC ) VL ー 480 V<br>AQZ206G2 Continuous load current IL ー 1.0  A<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

> Panasonic Industry Co., Ltd. 2026 ASCTB467E   202601 

ー 6 ー 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## REFERENCE DATA 

- ●Standard type 

**==> picture [511 x 196] intentionally omitted <==**

**----- Start of picture text -----**<br>
1-1.  Load current vs. ambient  1-2.  Load current vs. ambient  2.  Load current vs. ambient temperature<br>temperature characteristics  temperature characteristics  characteristics in adjacent mounting<br> ( DC type )   ( AC/DC type )<br>Allowable ambient temperature: –40 to +85°C Allowable ambient temperature: –40 to +85°C IL : Load current;<br>IL (max.): Maximum continuous load current<br>4.5 3.5 120<br>AQZ102<br>4.0 AQZ202<br>3.0 100<br>3.5 ℓ＝ 20 mm<br>2.5<br>3.0 80 ℓ＝ 5 mm ℓ＝ 10 mm<br>AQZ105 AQZ205<br>2.5 2.0<br>60<br>2.0 1.5<br>1.5 AQZ107 AQZ207 40<br>1.0<br>1.0<br>AQZ104 0.5 AQZ204 20 ℓℓ<br>0.5 ℓ=Adjacent mounting pitch<br>0 0 0<br>-40 -20 0 20 40 60 8085 100 -40 -20 0 20 40 60 8085 100 -40 -20 0 20 40 60 8085 100<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>×100 (%)<br>Load current (A) Load current (A) /IIL(max.)L<br>**----- End of picture text -----**<br>


**==> picture [511 x 435] intentionally omitted <==**

**----- Start of picture text -----**<br>
3-1.  On resistance vs. ambient  3-2.  On resistance vs. ambient  3-3.  On resistance vs. ambient<br>temperature characteristics  temperature characteristics  temperature characteristics<br> ( DC type )   ( DC type )   ( AC/DC type )<br>LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Continuous load current: 1.6 A (DC) (AQZ102), Continuous load current: 0.52 A (DC) (AQZ107), Continuous load current: 1.2 A (DC) (AQZ202),<br>                                               1.04 A (DC) (AQZ105)                                                0.28 A (DC) (AQZ104)                                                0.8 A (DC) (AQZ205)<br>0.20 5 0.5<br>0.16 4 0.4<br>AQZ205<br>0.12 AQZ105 3 0.3<br>0.08 AQZ102 2 0.2<br>AQZ104 AQZ202<br>0.04 1 0.1<br>AQZ107<br>0 0 0<br>-40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>3-4.  On resistance vs. ambient  4-1.  Turn on time vs. ambient  4-2.  Turn on time vs. ambient<br>temperature characteristics  temperature characteristics  temperature characteristics<br> ( AC/DC type )   ( DC type )   ( AC/DC type )<br>LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Continuous load current: 0.4 A (DC) (AQZ207), Load voltage: 10 V (DC); Load voltage: 10 V (DC);<br>                                               0.2 A (DC) (AQZ204) Continuous load current: 100 mA (DC) Continuous load current: 100 mA (DC)<br>5.0 10 10<br>4.5<br>4.0 8 8<br>AQZ204<br>3.5<br>3.0 6 6<br>2.5 AQZ202<br>2.0 4 4<br>AQZ205<br>1.5 AQZ105 AQZ102<br>AQZ104<br>AQZ207<br>1.0 2 2 AQZ204<br>0.5 AQZ107 AQZ207<br>0 0 0<br>-40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>On resistance (�) On resistance (�) On resistance (�)<br>On resistance (�) Turn on time (ms) Turn on time (ms)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

Panasonic Industry Co., Ltd. 2026 

ー 7 ー 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## 5-1.  Turn off time vs. ambient 

temperature characteristics ( DC type ) 

5-2.  Turn off time vs. ambient temperature characteristics ( AC/DC type ) 

6-1.  LED operate current vs. ambient temperature characteristics ( DC type ) 

**==> picture [511 x 609] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED current: 10 mA; LED current: 10 mA; Load voltage: 10 V (DC);<br>Load voltage: 10 V (DC); Load voltage: 10 V (DC); Continuous load current: 100 mA (DC)<br>Continuous load current: 100 mA (DC) Continuous load current: 100 mA (DC)<br>1.0 1.0 5<br>0.8 0.8 4<br>0.6 0.6 3<br>AQZ104 AQZ105<br>AQZ105 AQZ107<br>0.4 0.4 AQZ202 2<br>AQZ107<br>AQZ102 AQZ102<br>0.2 0.2 AQZ207 AQZ205 1<br>AQZ204<br>AQZ104<br>0 0 0<br>-40 -20 0 20 40 60 80 85 -40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 80 85<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>6-2.  LED operate current vs. ambient  7-1.  LED turn off current vs. ambient  7-2.  LED turn off current vs. ambient<br>temperature characteristics  temperature characteristics  temperature characteristics<br> ( AC/DC type )   ( DC type )   ( AC/DC type )<br>Load voltage: 10 V (DC); Load voltage: 10 V (DC); Load voltage: 10 V (DC);<br>Continuous load current: 100 mA (DC) Continuous load current: 100 mA (DC) Continuous load current: 100 mA (DC)<br>5 5 5<br>4 4 4<br>3 3 3<br>AQZ204 AQZ105 AQZ204<br>2 2 AQZ104 AQZ107 2 AAQZ207QZ202<br>AQZ205<br>AQZ202<br>1 AQZ207 1 AQZ102 1<br>AQZ205<br>0 0 0<br>-40 -20 0 20 40 60 80 85 -40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>8.  LED dropout voltage vs. ambient  9-1.  Current vs. voltage characteristics of  9-2.  Current vs. voltage characteristics of<br>temperature characteristics output at MOS portion  output at MOS portion<br> ( DC type )   ( AC/DC type )<br>Sample: all types; LED current: 5 to 50 mA Ambient temperature: 25°C Ambient temperature: 25°C<br>1.5 4 4<br>AQZ102<br>AQZ202<br>3 3<br>1.4 AQZ105<br>AQZ205<br>2 2<br>AQZ107<br>1.3 1 AQZ1 04 1 AQZ207<br>AQZ204<br>-0.8 -0.6 -0.4 -0.2 -2.0 -1.5 -1.0 -0.5<br>1.2<br>50 ｍA 0 0.2 0.4 0.6 0.8 0 0.5 1.0 1.5 2.0<br>-1 Voltage (V) -1 Voltage (V)<br>1.1 20 ｍ A<br>10 ｍA -2 -2<br>5 ｍA<br>1.0<br>-3 -3<br>0 -4 -4<br>-40 -20 0 20 40 60 8085<br>Ambient temperature (°C)<br>30 ｍA<br>Turn off time (ms) Turn off time (ms)<br>LED operate current (mA)<br>LED operate current (mA) LED turn off current (mA) LED turn off current (mA)<br>Current (A) Current (A)<br>LED dropout voltage (V)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ー 8 ー 

ASCTB467E   202601 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

**==> picture [511 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
10-1.  Off state leakage current vs. load  10-2.  Off state leakage current vs. load  11-1.  Turn on time vs. LED forward<br>voltage characteristics voltage characteristics current characteristics ( DC type )<br>Ambient temperature: 25°C Ambient temperature: 25°C Load voltage: 10 V (DC);<br>Continuous load current: 100 mA (DC);<br>Ambient temperature: 25°C<br>20<br>10 [-3] 10 [-3] 18<br>16<br>14<br>10 [-6] 10 [-6]<br>12<br>AQZ105<br>10<br>10 [-9] 10 [-9] AQZ104, AQZ204 8 AQZ104 AQZ107<br>AQZ105, AQZ205 6<br>AQZ102, AQZ202 AQZ107, AQZ207 4<br>AQZ102<br>10 [-12] 10 [-12] 2<br>0<br>0 50 100 0 50 100 0 10 20 30 40 50<br>Load voltage (V) Load voltage (V) LED forward current (mA)<br>Turn on time (ms)<br>Off state leakage current (A) Off state leakage current (A)<br>**----- End of picture text -----**<br>


## 11-2.  Turn on time vs. LED forward current characteristics ( AC/DC type ) 

## 12-1.  Turn off time vs. LED forward current characteristics ( DC type ) 

12-2.  Turn off time vs. LED forward current characteristics ( AC/DC type ) 

**==> picture [511 x 396] intentionally omitted <==**

**----- Start of picture text -----**<br>
Load voltage: 10 V (DC); Measured portion: between terminals 4 and 6; Load voltage: 10 V (DC);<br>Continuous load current: 100 mA (DC); Load voltage: 10 V (DC); Continuous load current: 100 mA (DC);<br>Ambient temperature: 25°C Continuous load current: 100 mA (DC); Ambient temperature: 25°C<br>Ambient temperature: 25°C<br>20 0.5 0.5<br>18<br>16 0.4 0.4<br>14 AQZ202<br>AQZ205<br>12 0.3 0.3<br>10 AQZ205<br>8 0.2 0.2<br>AQZ105 AQZ202<br>6 AQZ102<br>4 AQZAQZ207204 0.1 AQZ104 AQZ107 0.1 AQZ207<br>2 AQZ204<br>0 0 0<br>0 10 20 30 40 50 0 10 20 30 40 50 0 10 20 30 40 50<br>LED forward current (mA) LED forward current (mA) LED forward current (mA)<br>13-1.  Turn on time vs. load voltage  13-2.  Turn on time vs. load voltage  13-3.  Turn on time vs. load voltage<br>characteristics ( DC type )  characteristics ( DC type )  characteristics ( AC/DC type )<br>LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Continuous load current: 100 mA; Continuous load current: 100 mA; Continuous load current: 100 mA;<br>Ambient temperature: 25°C Ambient temperature: 25°C Ambient temperature: 25°C<br>5 5 5<br>4 4 4<br>3 3 3<br>AQZ202<br>2 2 2<br>AQZ102<br>AQZ105 AQZ205<br>1 1 1<br>AQZ107<br>AQZ104<br>0 0 0<br>0 10 20 30 40 50 60 70 80 90 100 0 50 100 150 200 250 300 350 400 0 10 20 30 40 50 60 70 80 90 100<br>Load voltage (V) Load voltage (V) Load voltage (V)<br>Turn on time (ms) Turn off time (ms) Turn off time (ms)<br>Turn on time (ms) Turn on time (ms) Turn on time (ms)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ー 9 ー 

ASCTB467E   202601 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

**==> picture [511 x 626] intentionally omitted <==**

**----- Start of picture text -----**<br>
13-4.  Turn on time vs. load voltage  14-1.  Turn on time vs. load current  14-2.  Turn on time vs. load current<br>characteristics ( AC/DC type )  characteristics ( DC type )  characteristics ( DC type )<br>LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Continuous load current: 100 mA; Load voltage: 10 V (DC); Load voltage: 10 V (DC);<br>Ambient temperature: 25°C Ambient temperature: 25°C Ambient temperature: 25°C<br>5 5 5<br>4 4 4<br>3 3 3<br>AQZ102<br>2 2 2<br>AQZ204 AQZ105<br>AQZ107<br>1 AQZ207 1 1<br>AQZ104<br>0 0 0<br>0 50 100 150 200 250 300 350 400 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4<br>Load voltage (V) Load current (A) Load current (A)<br>14-3.  Turn on time vs. load current  14-4.  Turn on time vs. load current  15-1.  Turn off time vs. load voltage<br>characteristics ( AC/DC type )  characteristics ( AC/DC type )  characteristics ( DC type )<br>LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Load voltage: 10 V (DC); Load voltage: 10 V (DC); Continuous load current: 100 mA;<br>Ambient temperature: 25°C Ambient temperature: 25°C Ambient temperature: 25°C<br>5 5 0.5<br>4 4 0.4<br>AQZ205<br>3 3 0.3<br>AQZ202<br>2 2 AQZ204 0.2 AQZ105<br>AQZ207<br>AQZ102<br>1 1 0.1<br>0 0 0<br>0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 10 20 30 40 50 60 70 80 90 100<br>Load current (A) Load current (A) Load voltage (V)<br>15-2.  Turn off time vs. load voltage  15-3.  Turn off time vs. load voltage  15-4.  Turn off time vs. load voltage<br>characteristics ( DC type )  characteristics ( AC/DC type )  characteristics ( AC/DC type )<br>LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Continuous load current: 100 mA; Continuous load current: 100 mA; Continuous load current: 100 mA;<br>Ambient temperature: 25°C Ambient temperature: 25°C Ambient temperature: 25°C<br>0.5 0.5 0.5<br>0.4 0.4 0.4<br>0.3 0.3 0.3<br>AQZ202<br>AQZ104<br>0.2 0.2 AQZ205 0.2<br>AQZ107<br>0.1 0.1 0.1 AQZ207<br>AQZ204<br>0 0 0<br>0 50 100 150 200 250 300 350 400 0 10 20 30 40 50 60 70 80 90 100 0 50 100 150 200 250 300 350 400<br>Load voltage (V) Load voltage (V) Load voltage (V)<br>Turn on time (ms) Turn on time (ms) Turn on time (ms)<br>Turn on time (ms) Turn on time (ms) Turn off time (ms)<br>Turn off time (ms) Turn off time (ms) Turn off time (ms)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ー 10 ー 

ASCTB467E   202601 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## 16-1.  Turn off time vs. load current 

## 16-1.  Turn off time vs. load current 16-2.  Turn off time vs. load current 16-3.  Turn off time vs. load current characteristics ( DC type ) characteristics ( DC type ) characteristics ( AC/DC type ) 

**==> picture [511 x 608] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Load voltage: 10 V (DC); Load voltage: 10 V (DC); Load voltage: 10 V (DC);<br>Ambient temperature: 25°C Ambient temperature: 25°C Ambient temperature: 25°C<br>0.5 0.5 0.5<br>0.4 0.4 0.4<br>0.3 0.3 0.3<br>AQZ202<br>0.2 0.2 0.2<br>AQZ205<br>AQZ105<br>0.1 0.1 0.1<br>AQZ102 AQZ104<br>AQZ107<br>0 0 0<br>0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 0.5 1.0 1.5 2.0 2.5 3.0<br>Load current (A) Load current (A) Load current (A)<br>16-4.  Turn off time vs. load current  17.  Max. operating frequency vs.<br>characteristics ( AC/DC type )  load voltage and load current<br>LED current: 10 mA; Sample: All types;characteristics<br>Load voltage: 10 V (DC); LED current: 10 mA;<br>Ambient temperature: 25°C Ambient temperature: 25°C<br>0.5 10<br>duty = 50%<br>9<br>0.4 8<br>7<br>0.3 6<br>5<br>0.2 4<br>3<br>0.1 AQZ207 2<br>AQZ204<br>1<br>0 0<br>0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 10 20 30 40 50 60 70 80 90 100<br>Load current (A) V L(max.)V L ×× IILL(max.) ×100 (%)<br>18-1.  Output capacitance vs. applied  18-2.  Output capacitance vs. applied<br>voltage characteristics  voltage characteristics<br> ( DC type )   ( AC/DC type )<br>Frequency: 1 MHz; Frequency: 1 MHz;<br>Ambient temperature: 25°C Ambient temperature: 25°C<br>2000 2000<br>1800 1800<br>1600 1600<br>1400 AQZ102 1400<br>1200 1200 AQZ202<br>1000 AQZ105 1000<br>800 800<br>600 AQZ107 600 AQZ 205 AQZ207 AQZ204<br>400 AQZ 104 400<br>200 200<br>0 0<br>0 20 40 60 80 100 0 20 40 60 80 100<br>Applied voltage (V) Applied voltage (V)<br>Turn off time (ms) Turn off time (ms) Turn off time (ms)<br>Turn off time (ms)<br>Max. operating frequency (cps)<br>Output capacitance (pF) Output capacitance (pF)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 11 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

- ●High capacity type 

1.  Load current vs. ambient temperature 2.  Load current vs. ambient temperature characteristics characteristics in adjacent mounting 

3.  On resistance vs. ambient temperature characteristics 

**==> picture [511 x 597] intentionally omitted <==**

**----- Start of picture text -----**<br>
Allowable ambient temperature: –40 to +85°C IL: Load current; LED current: 10 mA;<br>IL (max.): Maximum continuous load current Continuous load current:<br>6 A (DC) (AQZ202G), 4 A (DC) (AQZ205G),<br>2 A (DC) (AQZ207G), 1 A (DC) (AQZ206G2)<br>10 120 1.0<br>8 100 ℓ＝ 20 mm 0.8 AQZ206G2<br>AQZ202G 80 ℓ＝ 10 mm<br>6 ℓ＝ 5 mm 0.6<br>60<br>AQZ205G<br>4 0.4<br>40<br>AQZ207G<br>AQZ207G<br>2 ℓℓ 0.2<br>AQZ206G2 20 ℓ= Adjacent mounting pitch AQZ202G AQZ205G<br>0 0 0<br>-40 -20 0 20 40 60 8085 100 -40 -20 0 20 40 60 8085 100 -40 -20 0 20 40 60 8085<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>4.  Turn on time vs. ambient temperature  5.  Turn off time vs. ambient temperature  6.  LED operate current vs. ambient<br>characteristics characteristics temperature characteristics<br>LED current: 10 mA; Load voltage: 10 V (DC); LED current: 10 mA; Load voltage: 10 V (DC); Load voltage: 10 V (DC);<br>Continuous load current: 100 mA (DC) Continuous load current: 100 mA (DC) Continuous load current: 100 mA (DC)<br>10 1.0 5<br>8 0.8 4<br>AQZ205G<br>6 0.6 3<br>AQZ202G<br>4 0.4 2<br>AQZ206G2<br>AQZ207G AQZ202G AQZ205G<br>AQZ207G AQZ202G AQZ205G AQZ206G2<br>2 0.2 1 AQZ20 7G<br>AQZ206G2<br>0 0 0<br>-40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 80 85<br>Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)<br>7.  LED turn off current vs. ambient  8.  LED dropout voltage vs. ambient  9.  Current vs. voltage characteristics of<br>temperature characteristics temperature characteristics output at MOS portion<br>Load voltage: 10 V (DC); Sample: all types; Ambient temperature: 25°C<br>Continuous load current: 100 mA (DC) LED current: 5 to 50 mA<br>5 1.5 6 AQZ202G<br>AQZ205G<br>1.4 4<br>4<br>AQZ207G<br>1.3 2<br>3 AQZ206G2<br>-0.6 -0.4 -0.2<br>1.2<br>50 ｍA 0.2 0.4 0.6<br>2 Voltage (V)<br>1.1 20 ｍ A -2<br>10 ｍA<br>1 AQZ202G, AQZ205G, AQZ206G2 5 ｍA<br>1.0 -4<br>AQZ207G<br>0 0 -6<br>-40 -20 0 20 40 60 8085 -40 -20 0 20 40 60 8085<br>Ambient temperature (°C) Ambient temperature (°C)<br>30 ｍA<br>×100 (%)<br>Load current (A) /IIL (max.)L On resistance (�)<br>Turn on time (ms) Turn off time (ms)<br>LED operate current (mA)<br>Current (A)<br>LED dropout voltage (V)<br>LED turn off current (mA)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 12 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## 10.  Off state leakage current vs. load voltage characteristics 

## 11.  Turn on time vs. LED forward current 12.  Turn off time vs. LED forward current characteristics characteristics 

**==> picture [511 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ambient temperature: 25°C Load voltage: 10 V (DC); Load voltage: 10 V (DC);<br>Continuous load current: 100 mA (DC); Continuous load current: 100 mA (DC);<br>Ambient temperature: 25°C Ambient temperature: 25°C<br>50 0.5<br>10 [-3]<br>40 0.4<br>10 [-6]<br>30 0.3<br>AQZ202G AQZ205G<br>AQZ205G<br>20 0.2<br>10 [-9]<br>AQZ207G AQZ205G AQZ202G<br>AQZ202G<br>AQZ206G2 10 AQZ206G2 0.1 AQZ207G AQZ206G2<br>10 [-12] AQZ207G<br>0 0<br>0 20 40 60 80 100 0 10 20 30 40 50 60 0 10 20 30 40 50 60<br>Load voltage (V) LED forward current (mA) LED forward current (mA)<br>Turn on time (ms) Turn off time (ms)<br>Off state leakage current (A)<br>**----- End of picture text -----**<br>


## 13.  Turn on time vs. load voltage characteristics 

## 14.  Turn on time vs. load current characteristics 

## 15.  Turn off time vs. load voltage characteristics 

**==> picture [511 x 403] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED current: 10 mA; LED current: 10 mA; LED current: 10 mA;<br>Continuous load current: 100 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA;<br>Ambient temperature: 25°C Ambient temperature: 25°C Ambient temperature: 25°C<br>10 10 0.5<br>8 8 0.4<br>6 AQZ205G 6 AQZ205G 0.3 AQZ205G<br>AQZ202G<br>4 AQZ202G 4 0.2 AQZ202G<br>AQZ206G2 AQZ207G<br>AQZ207G AQZ207G AQZ206G2<br>AQZ206G2<br>2 2 0.1<br>0 0 0<br>0 100 200 300 400 500 600 0 1 2 3 4 5 6 0 100 200 300 400 500 600<br>Load voltage (V) Load current (A) Load voltage (V)<br>16.  Turn off time vs. load current  17.  Max. operating frequency vs.  18.  Output capacitance vs. applied<br>characteristics load voltage and load current  voltage characteristics<br>characteristics<br>LED current: 10 mA; Sample: All types; LED current: 10 mA; Frequency: 1 MHz;<br>Load voltage: 10 V (DC); Ambient temperature: 25°C  Ambient temperature: 25°C<br>Ambient temperature: 25°C VL: Load voltage, VL (Max.): Max. rated load voltage<br>IL: Load current, IL (Max.): Max. rated continuous load current<br>0.5 10 5000<br>duty = 50%<br>9<br>0.4 8 4000<br>7<br>0.3 6 3000<br>AQZ205G<br>5 AQZ206G2<br>0.2 4 2000<br>AQZ202G 3<br>0.1 AQZ207G 2 1000 AQZ207G<br>AQZ206G2<br>1 AQZ202G<br>AQZ205G<br>0 0 0<br>0 1 2 3 4 5 6 0 10 20 30 40 50 60 70 80 90 100 0 20 40 60 80 100<br>Load current (A) VL   (max.)VL [×] × IIL (max.)L ×100 (%) Applied voltage (V)<br>Turn on time (ms) Turn on time (ms) Turn off time (ms)<br>Turn off time (ms)<br>Output capacitance (pF)<br>Max. operating frequency (cps)<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 13 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## ~~LT~~ DIMENSIONS ( Unit: mm ) 

The CAD data of the products with a " CAD " mark can be downloaded from our Website. 

**==> picture [480 x 469] intentionally omitted <==**

**----- Start of picture text -----**<br>
External dimensions PC board pattern<br> ( BOTTOM VIEW )<br>① ② ③ ④ 3.5 [±][0.2]<br>2-0.8 dia. 2-1.1 dia<br>21 [±][0.2] 2.8 [±][0.2]<br>2.54 10.16 5.08<br>Tolerance: ±0.1<br>AC/DC type oy + RR<br>① Input: DC–<br>② Input: DC+<br>③ Output: DC or AC ye ot<br>④ Output: DC or AC ae 1.5 1.2<br>DC type 1.1 1.5 0.25<br>① Input: DC– 0.5 0.8<br>② Input: DC+ 0.5 0.8<br>③ Output: DC– 2.54 5.08<br>④ Output: DC+ 10.16 General tolerance: ±0.1<br>SCHEMATIC AND WIRING DIAGRAMS<br>LC<br>Schematic Output Load  Connection Wiring diagram<br>configuration type<br>1 2 3 4<br>DC - Load +<br>IF R IL VL (DC)<br>ｰ<br>ｰ + 3 4<br>1 2 3 4 +<br>E1 IL VL (DC)<br>TT e S ｰ<br>Load<br>1 Form A<br>AC/ - 1 2 3 4 Load<br>DC<br>IF R IL VL (AC or DC)<br>3 4<br>1 2 3 4<br>E1 IL VL (AC or DC)<br>Th i s<br>Load<br>0.2±11<br>3.5 5<br>**----- End of picture text -----**<br>


## SCHEMATIC AND WIRING DIAGRAMS ~~LC~~ 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB467E   202601 

ー 14 ー 

Panasonic Industry Co., Ltd. 2026 

PhotoMOS Power SIL4 W3.5 mm 1 Form A 

## SAFETY STANDARDS 

Each standard may be updated at any time, so please check our Website for the latest information. 

**==> picture [511 x 243] intentionally omitted <==**

**----- Start of picture text -----**<br>
UL ( Recognized )  VDE ( Certified )<br>Part No. File No. File No. Contact rating<br>( Standard No. ) Contact rating  ( Standard No. )   ( Basic insulation )<br>AQZ102 4.0 A  60 V DC 4.0 A  60 V DC<br>AC/DC  AQZ105 2.6 A 100 V DC 2.6 A 100 V DC<br>dual use AQZ107 1.3 A 200 V DC 1.3 A 200 V DC<br>AQZ104 0.7 A 400 V DC 0.7 A 400 V DC<br>3.0 A  60 V AC ( peak )  3.0 A  60 V AC ( peak )<br>AQZ202<br>3.0 A  60 V DC 3.0 A  60 V DC<br>2.0 A 100 V AC ( peak )  2.0 A 100 V AC ( peak )<br>AQZ205<br>2.0 A 100 V DC 2.0 A 100 V DC<br>1.0 A 200 V AC ( peak )  1.0 A 200 V AC ( peak )<br>AQZ207 E191218 1.0 A 200 V DC Nr. 40051981 1.0 A 200 V DC<br> ( UL1577 )   ( EN62314 )<br>0.5 A 400 V AC ( peak )  0.5 A 400 V AC ( peak )<br>AQZ204<br>AC/DC  0.5 A 400 V DC 0.5 A 400 V DC<br>dual use 6.0 A  60 V AC ( peak )  6.0 A  60 V AC ( peak )<br>AQZ202G<br>6.0 A  60 V DC 6.0 A  60 V DC<br>4.0 A 100 V AC ( peak )  4.0 A 100 V AC ( peak )<br>AQZ205G<br>4.0 A 100 V DC 4.0 A 100 V DC<br>2.0 A 200 V AC ( peak )  2.0 A 200 V AC ( peak )<br>AQZ207G<br>2.0 A 200 V DC 2.0 A 200 V DC<br>1.0 A 600 V AC ( peak )  1.0 A 600 V AC ( peak )<br>AQZ206G2<br>1.0 A 600 V DC 1.0 A 600 V DC<br>**----- End of picture text -----**<br>


Please refer to " the latest product specifications " when designing your product. 

•Requests to customers: https://industry.panasonic.com/global/en/salespolicies 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

> Panasonic Industry Co., Ltd. 2026 ASCTB467E   202601 

ー 15 ー 

PhotoMOS[®] Cautions for Use 

## SAFETY WARNINGS 

- ●Do not use the product under conditions that exceed the range of its specifications. It may cause overheating, smoke, or fire. 

- Do not touch the recharging unit while the power is on. There is a danger of electrical shock. Be sure to turn off the power when performing mounting, maintenance, or repair operations on the device ( including connecting parts such as the terminal board and socket ) . 

- Check the wiring diagrams in the catalog and be sure to connect the terminals correctly. If the device is energized with short circuit or any wrong connection, it may cause unexpected malfunction, abnormal heat or fire. 

## PhotoMOS[®] Cautions for Use 

## ■Derating design 

Derating is a significant factor for reliable design and product life. Even if the conditions of use ( temperature, current, voltage, etc. ) of the product are within the absolute maximum ratings, reliability may be lowered remarkably when continuously used in high load conditions ( high temperature, high humidity, high current, high voltage, etc. ) Therefore, please derate sufficiently below the absolute maximum ratings and evaluate the device in the actual condition. 

Moreover, regardless of the application, if malfunctioning can be expected to pose high risk to human life or to property, or if products are used in equipment otherwise requiring high operational safety, in addition to designing double circuits, that is, incorporating features such as a protection circuit or a redundant circuit, safety testing should also be carried out. 

## ■ Applying stress that exceeds the absolute maximum rating 

If the voltage or current value for any of the terminals exceeds the absolute maximum rating, internal elements will deteriorate because of the overvoltage or overcurrent. In extreme cases, wiring may melt, or silicon P/N junctions may be destroyed. 

Therefore, the circuit should be designed in such a way that the load never exceed the absolute maximum ratings, even momentarily. 

## ■Input voltage ( for Voltage-sensitive type ) 

For rising and dropping ratio of input voltage ( dv/dt ) , maintain Min. 100 mV/ms. 

## ■Oscillation circuit and control circuit 

## ( for CC Type ) 

The oscillation circuit and control circuit of product may be destroyed by external noise, surge, static electricity and so on. 

For noise effect to peripheral circuits when oscillation circuit operates, please implement safety measures on the system before use by verifying operation under the actual design. 

## ■ Deterioration and destruction caused by discharge of static electricity 

This phenomenon is generally called static electricity destruction, and occurs when static electricity generated by various factors is discharged while the PhotoMOS terminals are in contact, producing internal destruction of the element. 

To prevent problems from static electricity, the following precautions and measures should be taken when using your device. 

- 1)  Employees handling PhotoMOS should wear anti-static clothing and should be grounded through protective resistance of 500 kΩ to 1 MΩ. 

- 2)  A conductive metal sheet should be placed over the worktable. Measuring instruments and jigs should be grounded. 

- 3)  When using soldering irons, either use irons with low leakage current, or ground the tip of the soldering iron. ( Use of low-voltage soldering irons is also recommended. ) 

- 4)  Devices and equipment used in assembly should also be grounded. 

- 5)  When packing printed circuit boards and equipment, avoid using high-polymer materials such as foam styrene, plastic, and other materials which carry an electrostatic charge. 

- 6)  When storing or transporting PhotoMOS, the environment should not be conducive to generating static electricity ( for instance, the humidity should be between 45 % and 60 % ) , and PhotoMOS should be protected using conductive packing materials. 

## ■Unused terminals 

The No. 3 terminal is used with the circuit inside the device. Therefore, do not connect it to the external circuitry with either connection method A, B or C. ( 1 Form A 6-pin type ) 

## ■Short across terminals 

Do not short circuit between terminals when device is energized, since there is possibility of breaking of the internal IC. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

> Panasonic Industry Co., Ltd. 2025 ASCTB65E   202509 

ー 16 ー 

PhotoMOS[®] Cautions for Use 

## ■Surge voltages at the input 

If reverse surge voltages are present at the input terminals, connect a diode in reverse parallel across the input terminals and keep the reverse voltages below the reverse breakdown voltage. 

Typical circuits are below shown. 

1) 6-pin 

**==> picture [156 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 6<br>2 5<br>3 4<br>**----- End of picture text -----**<br>


- 2) Power type 

**==> picture [116 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
3 4<br>1 2<br>**----- End of picture text -----**<br>


■Reverse voltages at the input ( for CC Type ) If reverse voltages are present at the input terminals, for example, connect a schottky barrier diode in reverse parallel across the input terminals and keep the reverse voltages below the reverse breakdown voltage. Typical circuit is shown below. 

**==> picture [106 x 37] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 4<br>2 3<br>**----- End of picture text -----**<br>


## ■LED forward current vs. Ambient temperature characteristics 

Please keep the LED forward current to within the range given below. 

( *Please check the reference data in each catalog for products with maximum ambient temperature ( operating ) over 85 ℃. ) 

**==> picture [155 x 147] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>80<br>60<br>40<br>20<br>0<br>-40 -20 0 20 40 60 8085 100<br>Ambient temperature (°C)<br>LED forward current (mA)<br>**----- End of picture text -----**<br>


For AQV209G, APV1111GV, APV3111GV 

**==> picture [155 x 147] intentionally omitted <==**

**----- Start of picture text -----**<br>
50<br>40<br>30<br>20<br>10<br>0<br>-40 -20 0 20 40 60 80 85 100<br>Ambient temperature (°C)<br>LED forward current (mA)<br>**----- End of picture text -----**<br>


## ■ Recommended LED forward current or recommended input voltage 

Design in accordance with the recommended operating conditions for each product. 

Since these conditions are affected by the operating environment, ensure conformance with all relevant specifications. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB65E   202509 

ー 17 ー 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

■Ripple in the input power supply If ripple is present in the input power supply, observe the following: 

- 1)  For LED forward current at Emin, please maintain the value mentioned at " ■Recommended LED forward current. " 

■Output spike voltages 

   - 1)  If an inductive load generates spike voltages which exceed the absolute maximum rating, the spike voltage shall be limited. Representative circuit examples of AC/DC dual use type are shown below. There are the same with DC only type. 

      - (1) 6-pin 

- 2)  Please make sure for the LED forward current at Emax. is less than the current value of the " ■Absolute maximum ratings " . 

- 3)  Please maintain the input voltage at least 4 V for Emin. ( GU, RF and Power voltage-sensitive type ) . 

- 4)  Please make sure the input voltage for Emax. is no higher than 6 V ( GU and RF voltage-sensitive type ) . 

- 5)  Please make sure the input voltage for Emax. is no higher than 30 V ( Power voltage-sensitive type ) . 

- 6)  Please maintain the input voltage at least 3 V for Emin. ( for CC Type ) 

**==> picture [133 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 6<br>2 5<br>Load<br>3 4<br>Clamp diode is<br>connected in parallel<br>with the load.<br>1 6<br>2 5<br>Load<br>3 H 4 ST g<br>{|<br>CR snubber is<br>connected in parallel<br>with the load.<br>**----- End of picture text -----**<br>


- 7)  Please make sure the input voltage for Emax. is no higher than 5.5 V. ( for CC Type ) 

- (2) Power type 

**==> picture [460 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4<br>oMo Load<br>Emin. Emax. Clamp diode is<br>“Tl > a connected in parallel<br>with the load.<br>8)  Please keep amplitude voltage of ripple within ±0.5 V.<br> ( for CC Type )<br>p>fPAa-—t within ±0.5 V 1 2 3 4<br>Set voltage Load CR snubber is<br>mae! connected in parallel<br>with the load.<br>within ±0.5 V<br>1 2 3 4<br>Load A varistor is<br>connected in parallel<br>with PhotoMOS [®]<br>**----- End of picture text -----**<br>


- (3) CC Type 

**==> picture [144 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 4<br>Load<br>2 3<br>Clamp diode is<br>connected in parallel<br>with the load.<br>1 4<br>Load<br>2 3<br>: i<br>oP T o S<br>{}<br>CR snubber is<br>connected in parallel<br>with the load.<br>**----- End of picture text -----**<br>


- 2)  When Clamp diode or CR Snubber is used in the circuit, the spike voltages from the load are limited. But the longer wire may become the inductance and cause the spike voltage. Keep the wire as short as possible. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ー 18 ー 

ASCTB65E   202509 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

## ■Output Waveform ( CC Type ) 

This product has the capacitor coupled isolation. Therefore, if output waveform fluctuates along the time axis ( e.g. AC waveform or pulsating waveform ) , it may affect the operation of this product and peripheral circuit. Please evaluate the device in the actual condition. 

## ■Notes for mounting 

- 1)  When different kinds of packages are mounted on PC board, temperature rise at soldering lead is highly dependent on package size. Therefore, please set the lower temperature soldering condition than the conditions of item " ■Soldering " , and confirm the temperature condition of actual usage before soldering. 

## ■Continual DC bias ( AQV259 and AQV258 ) 

If a continual DC bias will be applied between the input and output, the breakdown voltage of the switching element MOSFET on the output side may degrade. Therefore, be sure to test the product under actual conditions. Example of circuits that will cause degradation of breakdown voltage of MOSFET is given below. 

**==> picture [173 x 64] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 6<br>E  IF<br>2 5 IL<br>3 4<br>Load<br>**----- End of picture text -----**<br>


## ■Connections Between Input and Output ( CC Type ) 

If you wish to use the product with a connection between input and output, you may not obtain expected performance. Therefore, please be sure to evaluate the device in the actual usage. A circuit example is shown below that may negatively affect PhotoMOS  characteristics. 

**==> picture [167 x 63] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 4<br>VIN IIN IL VL(AC, DC)<br>Load<br>2 3<br>**----- End of picture text -----**<br>


## ■Cleaning solvents compatibility 

Cleaning the solder flux should use the immersion washing with an organic solvent. If you have to use ultrasonic cleaning, please adopt the following conditions and check that there are no problems in the actual usage. 

- Frequency: 27 to 29 kHz 

- Ultrasonic output: No greater than 0.25 W/cm[2] * 

- Cleaning time: 30 s or less 

- Others:  Float PC board and the device in the cleaning solvent to prevent from contacting the ultrasonic vibrator 

- Applies to unit area ultrasonic output for ultrasonic baths 

- 2)  When soldering condition exceeds our recommendation, the PhotoMOS characteristics may be adversely affected. It may occur package crack or bonding wire breaking because of thermal expansion unconformity and resin strength reduction. Please contact our sales office about the propriety of the condition. 

- 3)  Please confirm the heat stress by using actual board because it may be changed by board condition or manufacturing process condition. 

- 4)  Solder creepage, wettability, or soldering strength will be affected by the soldering condition or used soldering type. Please check them under the actual production condition in detail. 

- 5)  Please apply coating when the device returns to a room temperature. 

## ■Input wiring pattern 

- 1)  With AQY* or AQW* series avoid installing the input ( LED side ) wiring pattern to the bottom side of the package if you require the specified I/O isolation voltage ( Viso ) after mounting the PC board. Since part of the frame on the output side is exposed, it may cause fluctuations in the I/O isolation voltage. 

**==> picture [110 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
Portion of output side frame<br>(Output terminal side)<br>Input wiring<br>pattern (Input terminal side)<br>May not allow the prescribed I/O withstand<br>voltage (Viso) to be achieved<br>**----- End of picture text -----**<br>


   - Excluding high I/O isolation voltage products and SSOP, SON, and TSON packages 

- 2)  Exposed terminals are electrically connected to internal elements. Be aware that contact with external circuits may cause deterioration of insulation between input and output, leading to destruction of internal elements. 

- 3)  If installed in proximity to other device, take care to avoid short circuits between device, which may occur if exposed frames of adjacent device come too close. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ー 19 ー 

ASCTB65E   202509 

Panasonic Industry Co., Ltd. 2025 

## PhotoMOS[®] Cautions for Use 

## ■Soldering 

- 1)  Example of surface-mount terminal recommended conditions 

   - (1)  IR ( Infrared reflow ) soldering method 

      - In case of automatic soldering, following conditions should be observed. ( recommended condition reflow: Max. 2 times, measurement point: soldering lead ) 

**==> picture [231 x 99] intentionally omitted <==**

**----- Start of picture text -----**<br>
t 3<br>T 3 T1 = 150 to 180°C<br>T2 = 230°C<br>T 2 T3 = 240 to 250°C*<br>t1 = 60 to 120 s<br>T 1 t2 = Within 30 s<br>t3 = Within 10 s<br>*240 to 245°C for SON, VSSOP<br>  and TSON package<br>t 1 t 2<br>**----- End of picture text -----**<br>


( *Some products have different recommended conditions. Please check " the latest product specifications " . ) 

## (2)  Other soldering methods 

Other soldering methods ( VPS, hot-air, hot plate, laser heating, pulse heater, etc. ) affect the PhotoMOS characteristics differently, please evaluate the device under the actual usage. 

- (3)  Manual soldering method 

   - Temperature: 350 to 400 ℃, within 3 s, electrical power 30 to 60 W 

- About the exposed terminals on the sides of the package ( for VSSOP, WSSOP ) 

For VSSOP and WSSOP type, as shown in the following figure, part of the input and output frames are exposed on the sides of the package. Due to this, please be keep in mind the cautions listed below. 

- 1)  Take care to avoid short circuits between exposed terminals, which may cause insulation deterioration between input and output, leading to destruction of internal elements. 

- 2)  Since the exposed terminals are connected electrically to the internal element, please refer to the item " ■Deterioration and destruction caused by discharge of static electricity " , and implement sufficient measures to control static electricity. 

- 3)  When installing the devices in the vicinity, please keep in mind that if the exposed frames of adjacent devices get too close, a short between devices may occur. 

**==> picture [129 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
Part of frame on output side<br>Part of frame on input side<br>**----- End of picture text -----**<br>


( Example: VSSOP type ) 

- 2)  Example of through hole terminal recommended conditions 

   - (1)  DWS soldering method 

In case of automatic soldering, following conditions should be observed. 

- ( recommended condition number of times: 

Max. 1 time, measurement point: soldering lead *[1] ) 

**==> picture [216 x 75] intentionally omitted <==**

**----- Start of picture text -----**<br>
T 2 T1 = 120°C<br>T2 = Max. 260°C<br>t1 = within 60 s<br>T 1<br>t2+t3 = within 5 s<br>t 1 t 2 t 3<br>**----- End of picture text -----**<br>


*1: Solder temperature: Max. 260 ℃ 

- (2)  Other soldering method 

   - ( recommended condition: 1 time ) Preheating: Max. 120 ℃, within 120 s, measurement point: soldering lead Soldering: Max. 260 ℃, within 10 s, measurement area: soldering temperature 

## (3)  Manual soldering method 

Temperature: 350 to 400 ℃, within 3 s, electrical power 30 to 60 W 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ー 20 ー 

ASCTB65E   202509 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

## ■Adjacent mounting 

When several PhotoMOS are mounted closely each other or heat-generating components are mounted close to the PhotoMOS, the abnormal heating may occur. This abnormal heat may be caused by the internal element when energized or thermal interference between the devices. The degree of temperature rise depends on the mounting layout of the devices and usage condition, therefore please be sure to use PhotoMOS with reduced load current after testing under the worst condition of the actual usage. 

## ■Transportation and storage 

- 1)  Extreme vibration during transport may deform the lead or damage the PhotoMOS characteristics. Please handle the outer and inner boxes with care. 

- 2)  Inadequate storage condition may degrade soldering, appearance, and characteristics. The following storage conditions are recommended: 

   - Temperature: 0 to 45 ℃ 

   - Humidity: Max. 70 % RH 

   - Atmosphere:  No harmful gasses such as sulfurous acid gas, minimal dust. 

- 3)  Storage before TSON, VSSOP, WSSOP, SON, SSOP, or SOP processing In case the heat stress of soldering is applied to the PhotoMOS which absorbs moisture inside of its package, the evaporation of the moisture increases the pressure inside the package and it may cause the package blister or crack. This device is sensitive to moisture and it is packed in the sealed moisture-proof package. Please make sure the following condition after unsealing. 

## ■Water condensation 

Water condensation occurs when the ambient temperature changes suddenly from a high temperature to low temperature at high humidity, or the device is suddenly transferred from a low ambient temperature to a high temperature and humidity. Condensation causes the failures such as insulation deterioration. 

Panasonic Industry Co., Ltd. does not guarantee the failures caused by water condensation. The heat conduction by the equipment the PhotoMOS is mounted may accelerate the water condensation. Please confirm that there is no condensation in the worst condition of the actual usage. ( Special attention should be paid when high temperature heating parts are close to the PhotoMOS. ) 

## ■About foreign matter between the output terminals ( AQY206GV ) 

The distance between the output terminals of this device is short. If foreign matter is caught between the output terminals after mounting on the PC board, it will result in a leakage path. This leakage path increases the leakage current, which results in your products to malfunction. Additionally, the leakage path causes abnormal heat generation and short circuiting, which results in the destruction of your products. 

Although the absolute maximum load voltage rating is guaranteed for this device, please ensure the prevention of foreign matter on the area between the output terminals and evaluate this device in the most extreme conditions of actual usage. 

- Please use the device immediately after unsealing. 

- ( Within 30 days at 0 to 30 ℃ and Max. 70 % RH ) 

- If the device will be kept for a long time after unsealing, please store in another moisture-proof package containing silica gel. ( Please use within 90 days. ) 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB65E   202509 

ー 21 ー 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

■Packing format 1) Tape and reel 

**==> picture [512 x 705] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tape dimensions Dimensions of tape reel<br>Direction of picking<br>Tractor feed holes 1.5 ｰ [+0.1] 0 dia. 21 [±][0.8]<br>0.2 [±][0.05] 2.2 [±][0.2] 4 [±][0.1]<br>2 [±][0.5]<br>TSON Device mountedon tape<br>4-pin 1.2 [±][0.3] 1.05±0.1dia. 2 [±][0.1]<br>4±0.1<br>① When picked from 1/2-pin side: Part No.  AQY2C*R*PX,<br>AQY2C*R*P1X  ( Shown above )  *Quality of material: Polystyrene (PS)13 [±][0.5] dia. 13 [±][1.5] 1.2±0.5<br>② When picked from 3/4-pin side: Part No. AQY2C*R*PZ<br>Direction of picking 21 [±][0.8]<br>Tractor feed holes 1.5 +0.1ｰ0 dia. 80 [±][1] dia.<br>0.4 [±][0.05] 2.4±0.2 4.0 [±][0.1]<br>2 [±][0.5]<br>VSSOP Device mounted<br>on tape<br>4-pin 3.4 [±][0.3] 1±0.1dia. 8 [±][0.1] 2 [±][0.1]<br>① When picked from 1 and 4-pin side: Part No.  AQY*TY<br> ( Shown above )<br>② When picked from 2 and 3-pin side: Part No. AQY*TW *Quality of material: Paper 13 [±][0.5] dia. 14±1.5 2 [±][0.5]<br>Direction of picking<br>Tractor feed holes 1.5  [+0.1] ｰ0 dia.<br>0.3 [±][0.05] 2.8 [±][0.2] 4 [±][0.1]<br>SON Device mounted End of the part number Y/W<br>4-pin 2 [±][0.3] on tape 1.5 [±][0.1] dia. 4 [±][0.1] 2 [±][0.1] 21 [±][0.8]<br>80 [±][1] dia.<br>① When picked from 1 and 4-pin side: Part No.  AQY*MY, AQY*M1Y  2 [±][0.5]<br> ( Shown above )<br>② When picked from 2 and 3-pin side: Part No. AQY*MW<br>Direction of picking<br>Tractor feed holes 1.5 ｰ [+0.1] 0 dia.<br>0.3 [±][0.05] 3.0 [±][0.1] 4.0 [±][0.1]<br>SSOP Device mounted *Quality of material: Paper 13 [±][0.5] dia. 14±1.5 2 [±][0.5]<br>4-pin 2.4on tape [±][0.3] 4.0 [±][0.1]<br>1.5ｰ [+0.1] 0 dia.<br>End of the part number 1Y<br>① When picked from 1 and 4-pin side: Part No.  AQY*VY, AQY221*V1Y,<br>APV*111*VY,   21 [±][0.8]<br>APV*111*V1Y<br>② When picked from 2 and 3-pin side: Part No.   ( Shown above ) AQY*VW, APV*111*VW 2 [±][0.5]<br>Direction of picking<br>＋0.1<br>Direction of picking1.5     dia.0<br>0.4 [±0.05] 1.7 [±0.2] 4.0 [±0.1]<br>13 [±][0.5] dia.<br>WSSOP *Quality of material: Polystyrene (PS) 13 [±][1.5] 1.2±0.5<br>4-pin Device mounted<br>on tape<br>2.2 [±0.3] φ1.0±0.1 4.0 ±0.1 2.0 ±0.1<br>When picked from 1 and 4-pin side: Part No. AQY*WY, AQY*W1Y<br>0.1<br>±1.75<br>0.2<br>±2.4 +0.3120.1ｰ 3±dia. 3±dia.<br>0.1 60 180<br>±<br>5.5<br>0.1±<br>0.2±2.5 1.75<br>+0.312.00.1ｰ ±dia.1 2±dia.<br>0.1±5.5 80 250<br>0.1±1.75<br>0.2±3.6<br>0.3±12<br>0.1±<br>5.5<br>±dia.1 2±dia.<br>80 250<br>0.1±<br>0.2±5.1 1.75<br>+0.312.00.1ｰ<br>0.1±<br>5.5<br>3±dia. 3±dia.<br>60 180<br>±0.1<br>1.75<br>±0.2<br>2.5 ＋0.3 －0.1<br>±0.1 12.0<br>5.5<br>**----- End of picture text -----**<br>


Note: " * " indicates characters of number or alphabet. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB65E   202509 

ー 22 ー 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

**==> picture [512 x 735] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tape dimensions Dimensions of tape reel<br>Direction of picking 21 [±][0.8]<br>Tractor feed holes 80 [±][1] dia.<br>0.3 [±][0.05] 1.5 +0.1ｰ0 dia. 7.2 ±0.1<br>2 [±][0.5]<br>SOP Device mounted on tape<br>4-pin 2.8  [±][0.3] 4  [±][0.1] 1.55 [±][0.1] dia.<br>12  [±][0.1] 2 [±][0.1]<br>① When picked from 1/2-pin side: Part No.  AQY*SX,<br>APV**21SX<br> ( Shown above )<br>② When picked from 3/4-pin side: Part No. AQY*SZ, APV**21SZ *Quality of material: Paper 13 [±][0.5] dia. 14±1.5 2 [±][0.5]<br>21 [±][0.8]<br>80 [±][1] dia.<br>Direction of picking<br>0.3  [±][0.05] Tractor feed holes1.5 +0.1ｰ0 dia. 4 ±0.1 7.2 ±0.1<br>2 [±][0.5]<br>SOP<br>6-pin Device mounted on tape<br>12  [±][0.1] 2 [±][0.1] 1.55 [±][0.1] dia.<br>2.8  [±][0.3]<br>① When picked from 1/2/3-pin side: Part No.  AQV*SX<br> ( Shown above )<br>② When picked from 4/5/6-pin side: Part No. AQV*SZ *Quality of material: Paper 13 [±][0.5] dia. 14±1.5 2 [±][0.5]<br>Direction of picking<br>0.3  [±][0.05] Tractor feed holes1.5 +0.1ｰ0 dia. 7.5 ±0.1<br>SOP Device mounted<br>8-pin on tape 21±0.8<br>2.8  [±][0.3] 4  [±][0.1] 1.55 [±][0.1] dia. 80 [±][1] dia.<br>12  [±][0.1] 2 [±][0.1]<br>① When picked from 1/2/3/4-pin side: Part No.  AQW*SX<br> ( Shown above )  2 [±][0.5]<br>② When picked from 5/6/7/8-pin side: Part No. AQW*SZ<br>Direction of picking<br>Tractor feed holes<br>0.3  [±][0.05] 1.5 +0.1ｰ0 dia. 7.5  [±][0.1]<br>*Quality of material: Paper 13 [±][0.5] dia. 17.5 [±][1.5] 2 [±][1]<br>SOP Device mounted<br>16-pin on tape<br>4  [±][0.1] 1.55 [±][0.1] dia.<br>2.8  [±][0.3] 12  [±][0.1] 2 [±][0.1]<br>① When picked from 1/2/3/4/5/6/7/8-pin side: Part No.  AQS*SX<br> ( Shown above )<br>② When picked from 9/10/11/12/13/14/15/16-pin side: Part No. AQS*SZ<br>21 [±][0.8]<br>Direction of picking 80 [±][1] dia.<br>Tractor feed holes<br>0.3 ±0.05 1.5+0.1ｰ0 dia. 4  [±][0.1] 10.2  [±][0.1]<br>2 [±][0.5]<br>DIP<br>4-pin Device mounted on tape<br>Surface  3.8 [±][0.3] 12  [±][0.1] 2 [±][0.1] 1.55 [±][0.1] dia.<br>mount<br>terminal ① When picked from 1/2-pin side: Part No.  AQY*HAX,<br>AQY210HLAX<br> ( Shown above )<br>② When picked from 3/4-pin side: Part No. AQY*HAZ, AQY210HLAZ<br>*Quality of material: Paper 13 [±][0.5] dia. 13.5 [±][2.0] 2±0.5<br>0.1±<br>1.75<br>0.1±4.7  0.1±5.5  +0.3120.1ｰ<br>±dia.1 2±dia.<br>80 250<br>0.1±<br>1.75<br>6.90.1± 0.1±5.5  +0.3120.1ｰ ±dia.1 2±dia.<br>80 250<br>0.1±<br>1.75<br>0.1± 0.1±57. +0.3 0.1ｰ<br>16<br>10.15<br>±1dia. 2±dia.<br>80 250<br>0.1±1.75<br>0.1± 0.1±7.5  +0.3 0.1ｰ<br>11.15  16<br>0.1±1.75<br>0.1± 0.1± +0.3 0.1ｰ<br>5.25  5.5  12  ±1dia. 2±dia.<br>80 300<br>**----- End of picture text -----**<br>


Note: " * " indicates characters of number or alphabet. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB65E   202509 

ー 23 ー 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

**==> picture [511 x 735] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tape dimensions Dimensions of tape reel<br>21±0.8<br>Direction of picking 80 [±][1] dia.<br>0.3  [±][0.05] Tractor feed holes1.5 [+0.1] ｰ0 dia. 10.1 ±0.1<br>2±0.5<br>DIP<br>6-pin<br>Surface  Device mounted on tape<br>mount 4.2  [±][0.3] 12  [±][0.1] 4  [±][0.1] 1.6 [±][0.1] dia.<br>terminal 2 [±][0.1]<br>① When picked from 1/2/3-pin side: Part No.  AQV*AX<br> ( Shown above )<br>② When picked from 4/5/6-pin side: Part No. AQV*AZ *Quality of material: Paper 13±0.5dia. 17.5 [±][2] 2 [±][0.5]<br>Direction of picking<br>Tractor feed holes<br>0.3  [±][0.05] 1.5 [+0.1] ｰ0 dia. 4  [±][0.1] 10.1 ±0.1<br>DIP<br>8-pin<br>Surface  Device mounted on tape<br>terminalmount  4.5±0.3 12  [±][0.1] 2 [±][0.1] 1.55 [±][0.1] dia. 21±0.8<br>80 [±][1] dia.<br>① When picked from 1/2/3/4-pin side: Part No.  AQW*AX<br>② When picked from 5/6/7/8-pin side: Part No. AQW*AZ ( Shown above )  2±0.5<br>Direction of picking<br>Tractor feed holes<br>0.3 ±0.05 1.5+0.1ｰ0 dia. 4  [±][0.1] 10.2 ±0.1<br>DIP<br>8-pin<br>Surface<br>mount  Device mounted on tape *Quality of material: Paper 13±0.5dia. 17.5 [±][2] 2 [±][0.5]<br>terminal 3.8 [±][0.3] 12 ±0.1 2 [±][0.1] 1.55 [±][0.1] dia.<br>High I/O<br>isolation<br>① When picked from 1/2/3/4-pin side: Part No.  AQW*EHAX,<br>voltage type<br>AQW210HLAX<br> ( Shown above )<br>② When picked from 5/6/7/8-pin side: Part No.  AQW*EHAZ,<br>AQW210HLAZ<br>21±0.8<br>Direction of picking 100 [±][1] dia.<br>0.3 ±0.05 Tractor feed holes1.5 +0.1ｰ0 dia. 4.0 ±0.1 12.6 ±0.1<br>2 [±][0.5]<br>Power-DIP<br>4-pin<br>Surface  Device mounted<br>mount  on tape<br>terminal 16.0±0.1 2.0±0.1 1.55±0.1dia.<br>4.5 ±0.3<br>① When picked from 1/2-pin side: Part No.  AQY*AX<br> ( Shown above )<br>② When picked from 3/4-pin side: Part No. AQY*AZ *Quality of material: Paper 13 [±][0.5] dia. 25.5 [±][2] 1.7 [±][0.8]<br>21±0.8<br>Direction of picking 80 [±][1] dia.<br>0.3  [±][0.05] Tractor feed holes1.5+0.1ｰ0 dia. 10.1 ±0.1<br>DIP  2±0.5<br>6-pin<br>Surface<br>mount<br>Device mounted on tape<br> ( Photovoltaic terminalMOSFET  4.2 [±][0.3] 12 ±0.1 2±0.1 4 ±0.1 1.6 [±][0.1] dia.<br>driver )<br>① When picked from 1/2/3-pin side: Part No.  APV1122AX<br> ( Shown above )<br>② When picked from 4/6-pin side: Part No. APV1122AZ *Quality of material: Paper 13±0.5dia. 17.5 [±][2] 2 [±][0.5]<br>0.1±<br>1.75<br>0.1±9.2 0.1±7.5  +0.3160.1ｰ ±1dia. 2±dia.<br>80 300<br>0.1±<br>1.75<br>0.1± 0.1±7.5 +0.3 0.1ｰ<br>10.2  16<br>±1dia. 2±dia.<br>0.1± 80 300<br>1.75<br>0.1± 0.1±7.5  +0.3 0.1ｰ<br>10.3  16<br>0.1±1.75<br>0.1±<br>.5 0.3<br>0.1±9.7 11  ±24.0 ±1dia. 2±dia.<br>100 330<br>0.1±1.75<br>0.1±9.2 0.1±7.5  +0.3160.1ｰ ±1dia. 2±dia.<br>80 300<br>**----- End of picture text -----**<br>


Note: " * " indicates characters of number or alphabet. 

Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB65E   202509 

ー 24 ー 

Panasonic Industry Co., Ltd. 2025 

PhotoMOS[®] Cautions for Use 

## 2)  Tube 

Devices are packaged in a tube so that 1-pin is on the stopper B side. Observe correct orientation when mounting them on PC boards. 

## ( PD type ) 

**==> picture [161 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
Stopper B Stopper A<br>**----- End of picture text -----**<br>


## ( DIP type ) 

**==> picture [164 x 136] intentionally omitted <==**

**----- Start of picture text -----**<br>
Stopper<br> ( SOP type )<br>Stopper B (green) Stopper A (gray)<br> ( Power type )<br>Stopper B Stopper A<br>**----- End of picture text -----**<br>


## ■ Input LED current 

( For High Capacity type: with part number G ) When making PhotoMOS turn on and turn off, please make sure that the LED forward current increases and decreases instantly. 

- ■Input voltage 

## ( for Power voltage-sensitive type ) 

For rising and dropping ratio of input voltage ( dv/dt ) , maintain Min. 100 mV/s. 

   - ■Adjacent mounting ( for Power type ) 

   - 1)  When devices are mounted close together with the heat-generated devices, ambient temperature may rise abnormally. Mounting layout and ventilation should be considered. 

   - 2)  When many devices are mounted close together, load current should be reduced. ( Refer to the data of " Load current in adjacent mounting vs. Ambient temperature characteristics." ) 

- ■Current limit function ( output current control ) 

- 1)  Current limit function aims to increase resistance to surges when the switch is turned on. Before using this function, connect the varistor to the output as shown in the figure below. 

**==> picture [179 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 4<br>Varistor Surge: 10×160�s 1.6kV<br>2 3<br>* Set the varistor voltage to 150 V or less.<br>**----- End of picture text -----**<br>


- 2)  The current limit function capability can be lost if used longer than the specified time. Be sure to set the output loss to the Max. rate. 

## ■Short circuit protection circuit 

The short circuit protection circuit is designed to protect circuits from excess current. Therefore, surge current may be detected as current overload in which case the output current will be cut and the off state maintained. For this reason, please include the inrush current in the load current and keep it below the maximum load current. Also, in order to maintain stability of internal IC operation, maintain an input current of at least 5 mA ( Latch type ) , 10 mA ( Non Latch type ) . 

## ■Photovoltaic MOSFET driver cautions for use 

When two external MOSFETs are connected with a common source terminal, oscillation may occur when operation is restored. Therefore, please insert a 100 to 1,000 Ω resistor between the gate terminal of the first MOSFET and the gate terminal of the second MOSFET. 

A typical example of this is given in the circuit below. 

**==> picture [159 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 6<br>2<br>3 4<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

> Panasonic Industry Co., Ltd. 2025 ASCTB65E   202509 

ー 25 ー 

PhotoMOS[®] Cautions for Use 

## ■Recommended load voltage 

As a guide in selecting PhotoMOS, please refer to the following table. 

## 1) Power PhotoMOS ( 1 Form A ) 

**==> picture [245 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
Absolute maximum rating Recommended<br>Load voltage Load current load voltage<br>AQZ102  60 V DC 4.0 A DC 5, 12, 24 V DC<br>AQZ105 100 V DC 2.6 A DC  48 V DC<br>AQZ107 200 V DC 1.3 A DC 100 V DC<br>AQZ104 400 V DC 0.7 A DC 200 V DC<br> 12 V AC<br>AQZ202 Peak AC, DC  60 V Peak AC, DC 3.0 A<br>5, 12, 24 V DC<br> 24 V AC<br>AQZ205 Peak AC, DC 100 V Peak AC, DC 2.0 A<br> 48 V DC<br> 48 V AC<br>AQZ207 Peak AC, DC 200 V Peak AC, DC 1.0 A<br>100 V DC<br>120 V AC<br>AQZ204 Peak AC, DC 400 V Peak AC, DC 0.5 A<br>200 V DC<br>DC type<br>AC/DC type<br>**----- End of picture text -----**<br>


## 2) Power PhotoMOS (1 Form B) 

**==> picture [245 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
Absolute maximum rating Recommended<br>Load voltage Load current load voltage<br>AC/DC  100 V AC<br>AQZ404 Peak AC, DC 400 V Peak AC, DC 0.5 A<br>type 200 V DC<br>**----- End of picture text -----**<br>


## 3) Power PhotoMOS Voltage-sensitive type ( 1 Form A ) 

**==> picture [245 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
Absolute maximum rating Recommended<br>Load voltage Load current load voltage<br>AQZ102D  60 V DC 3.6 A DC 5, 12, 24 V DC<br>AQZ105D 100 V DC 2.3 A DC  48 V DC<br>AQZ107D 200 V DC 1.1 A DC 100 V DC<br>AQZ104D 400 V DC 0.6 A DC 200 V DC<br> 12 V AC<br>AQZ202D Peak AC, DC  60 V Peak AC, DC 2.7  A<br>5, 12, 24 V DC<br> 24 V AC<br>AQZ205D Peak AC, DC 100 V Peak AC, DC 1.8  A<br> 48 V DC<br> 48 V AC<br>AQZ207D Peak AC, DC 200 V Peak AC, DC 0.9  A<br>100 V DC<br>120 V AC<br>AQZ204D Peak AC, DC 400 V Peak AC, DC 0.45 A<br>200 V DC<br>DC type<br>AC/DC type<br>**----- End of picture text -----**<br>


## 4) Power PhotoMOS High Capacity type ( 1 Form A ) 

**==> picture [245 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
Absolute maximum rating Recommended<br>Load voltage Load current load voltage<br>AQZ192 60 V DC 10 A DC 5, 12, 24 V DC<br>AQZ197 200 V DC  5 A DC 100 V DC<br> 12 V AC<br>AQZ202G Peak AC, DC  60 V Peak AC, DC 6 A<br>5, 12, 24 V DC<br> 24 V AC<br>AQZ205G Peak AC, DC 100 V Peak AC, DC 4 A<br> 48 V DC<br> 48 V AC<br>AQZ207G Peak AC, DC 200 V Peak AC, DC 2 A<br>100 V DC<br>120, 240 V AC<br>AQZ206G2 Peak AC, DC 600 V Peak AC, DC 1 A<br>200, 400 V DC<br>DC type<br>AC/DC type<br>**----- End of picture text -----**<br>


Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com 

ASCTB65E   202509 

ー 26 ー 

Panasonic Industry Co., Ltd. 2025 

■ Global Sales Network Information: industry.panasonic.com/global/en/salesnetwork/globalnetwork 

Electromechanical Control Business Division 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan industry.panasonic.com 

Specifications are subject to change without notice. ������������������ 

©Panasonic Industry Co., Ltd. 2026 

2026.1