APSD00060530100M00

Power Inductor (SMD), 10 µH, Unshielded, 1.8 A, APSD Series

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: PULSE ELECTRONICS
Product type: SMD Power Inductors
SVHC: No SVHC (04-Feb-2026)
Inductance: 10µH
Product Range: APSD Series
Product Width: 5.2mm
Product Height: 3mm
Product Length: 5.8mm
DC Resistance Max: 0.12ohm
RMS Current (Irms): -
Power Inductor Case: 5.8mm x 5.2mm x 3mm
Inductance Tolerance: ± 20%
Inductor Construction: Unshielded
Saturation Current (Isat): 1.8A

Delivery and price
Units per pack	6000
Price	0.229 €
Current stock	10+
Lead time	30 days

Datasheet

**Automotive Grade** 

## **Power Inductor** 

## **APSD Series** 

## **Overview** 

Power inductors are passive electronic components used in various circuits to store energy in a magnetic field when electrical current flows through them. They are critical in filtering, energy storage, and noise suppression in power electronic systems. 

They are designed to handle higher currents and are optimized for minimal power loss and thermal efficiency. 

## **Benefits** 

1. Automotive grade available 

2. Plated terminals on the ferrite core, sample structure 

3. Simple structure. 

4.  Operating temperature range － 40℃ ～ 150℃(Including self - temperature rise) 

## **Applications** 

1. Automotive Systems for CCD Module 

2. Lighting, LCD Panel/TV 

3. Net working 

4. Home device 

## **Product Information** 

|**Series**|**L (mm)**|**W(mm)**|**T (mm)**|**Inductance (**µ**H)**|
|---|---|---|---|---|
|APSD|3.3|3.0|2.1|0.15 ~ 1000|
||4.5|4.0|3.2||
||5.8|5.2|3.0||
||5.8|5.2|4.5||
||7.8|7.0|3.5||
||7.8|7.0|5.0||



AEC-Q200 

## **APSD00060530 Series Specification** 

**1 Scope:** This specification applies to SMD Unshielded Power Inductors ~~_|~~ 

## **2[Part Numbering: ]** 

**==> picture [66 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
3 Rating:<br>_|<br>**----- End of picture text -----**<br>


Operating Temperature: `－` 40 `℃～＋` 125 `℃ (` Including self temp. rise `)` 

Storage Temperature: `－` 40 `℃～＋` 125 `℃` (For after the circuit board is mounted) Storage Temperature: (on tape & reel): -20°C to +40°C; 75% RH max. **4 Marking:** ~~_|~~ 

## **5[Standard Testing Condition]** 

||Unless otherwise specified|In case of doubt|
|---|---|---|
|Temperature|OrdinaryTemperature(15 to 35℃)|20 to 30℃|
|Humidity|OrdinaryHumidity(25 to 85% RH)|50 to 80 %RH|



AEC-Q200 

## **APSD00060530 Series Specification** 

## **6 Configuration and Dimensions:** 

## **Net Weight (grms)** 

## **7 Electrical Characteristics:** 

|**Part No.**|**Inductance**|**Test Freq.**|**RDC**|**Isat**|**Irms**|**Tolerance**|**Marking**|
|---|---|---|---|---|---|---|---|
||**(uH)**||**(**Ω**)Max.**|**(A)**|**(A)**|**(±%)**||
|APSD000605301R0□00|1|7.96 MHz,1 V|0.03|4.5|4.5|20|1R0|
|APSD000605301R2□00|1.2|7.96 MHz,1 V|0.03|4.2|4.2|20|1R2|
|APSD000605301R5□00|1.5|7.96 MHz,1 V|0.03|4.1|4.1|20|1R5|
|APSD000605301R8□00|1.8|7.96 MHz,1 V|0.03|3.7|3.7|10,20|1R8|
|APSD000605302R0□00|2|7.96 MHz,1 V|0.03|3.6|3.6|20|2R0|
|APSD000605302R2□00|2.2|7.96 MHz,1 V|0.03|3.5|3.5|20|2R2|
|APSD000605302R7□00|2.7|7.96 MHz,1 V|0.04|3.2|3.2|20|2R7|
|APSD000605303R3□00|3.3|7.96 MHz,1 V|0.05|2.8|2.8|10,20|3R3|
|APSD000605303R9□00|3.9|7.96 MHz,1 V|0.06|2.6|2.6|20|3R9|
|APSD000605304R7□00|4.7|7.96 MHz,1 V|0.07|2.5|2.5|10,20|4R7|
|APSD000605305R6□00|5.6|7.96 MHz,1 V|0.08|2.4|2.4|20|5R6|
|APSD000605306R8□00|6.8|7.96 MHz,1 V|0.09|2.2|2.2|20|6R8|
|APSD000605308R2□00|8.2|7.96 MHz,1 V|0.1|2|2|20|8R2|
|APSD00060530100□00|10|2.52 MHz,1 V|0.12|1.8|1.8|10,20|100|
|APSD00060530120□00|12|2.52 MHz,1 V|0.13|1.75|1.75|20|120|
|APSD00060530150□00|15|2.52 MHz,1 V|0.15|1.7|1.7|10,20|150|
|APSD00060530180□00|18|2.52 MHz,1 V|0.22|1.6|1.6|10,20|180|
|APSD00060530220□00|22|2.52 MHz,1 V|0.22|1.5|1.5|10,20|220|
|APSD00060530270□00|27|2.52 MHz,1 V|0.26|1.4|1.4|20|270|
|APSD00060530330□00|33|2.52 MHz,1 V|0.33|1.1|1.1|10,20|330|
|APSD00060530390□00|39|2.52 MHz,1 V|0.42|1|1|10,20|390|
|APSD00060530470□00|47|2.52 MHz,1 V|0.5|0.9|0.9|10,20|470|
|APSD00060530560□00|56|2.52 MHz,1 V|0.55|0.85|0.85|10,20|560|
|APSD00060530680□00|68|2.52 MHz,1 V|0.65|0.8|0.8|10,20|680|
|APSD00060530820□00|82|2.52 MHz,1 V|0.8|0.65|0.65|10,20|820|



**NOTE:** □ **-tolerance K=±10% /  M=±20%** 

1.Operating temperature range －４０℃ ~ １５０℃ (Including self - temperature rise) 2.Isat for Inductance drop 10% from its value without current. 3.Irms for a 40 ℃ temperature rise from 25 ℃ ambient. 4.The actual use current is suggested not to be out of Isat*80% 

## AEC-Q200 ~~LE~~ **APSD00060530 Series Specification** 

|**Part No.**|**Inductance**|**Test Freq.**|**RDC**|**Isat**|**Irms**|**Tolerance**|**Marking**|
|---|---|---|---|---|---|---|---|
||**(uH)**||**(**Ω**)Max.**|**(A)**|**(A)**|**(±%)**||
|APSD00060530101□00|100|1 kHz,1 V|0.9|0.6|0.6|10,20|101|
|APSD00060530121□00|120|1 kHz,1 V|1|0.58|0.58|10,20|121|
|APSD00060530151□00|150|1 kHz,1 V|1.3|0.43|0.43|10,20|151|
|APSD00060530181□00|180|1 kHz,1 V|1.5|0.41|0.41|10,20|181|
|APSD00060530221□00|220|1 kHz,1 V|2|0.38|0.38|10,20|221|
|APSD00060530271□00|270|1 kHz,1 V|2.5|0.35|0.35|10,20|271|
|APSD00060530331□00|330|1 kHz,1 V|3.2|0.28|0.28|10,20|331|
|APSD00060530391□00|390|1 kHz,1 V|3.5|0.26|0.26|10,20|391|
|APSD00060530471□00|470|1 kHz,1 V|4.2|0.2|0.2|10,20|471|



**APSD00060530 Series Specification** 

AEC-Q200 

## **8 APSD00060530 Series** ~~_|~~ **8.1 Construction:** 

## **8.2 Material List:** 

AEC-Q200 

## **APSD00060530 Series Specification** 

|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
||1-1-1 Board Flex<br>The forces applied on the right<br>Refer to AEC-Q200-005<br>conditions must not damage Test device shall be soldered on the substrate<br>the terminal electrode and the Substrate Dimension: 100x40x1.6mm<br>ferrite<br>Deflection: 2.0mm<br>KeepingTime: 60sec<br>~~a~~|||||||||||
||1-1-2|Resistance to Soldering Heat Appearance: No damage|Refer to MIL-STD-202 Method 210|||||||||
|||Inductance change shall be|Pre-heating: 150℃, 1min|||||||||
|||within ±10%.|Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free)|||||||||
||||Solder Temperature: 250±5℃|||||||||
||||Immersion Time: 10±1sec|||||||||
||1-1-3|Solder ability<br>The electrodes shall be at|Refer to J-STD-002|||||||||
|||least 95% covered with new|Pre-heating: 150℃, 1min|||||||||
|||solder coating|Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free)|||||||||
||||Solder Temperature: 245±5℃(Pb-Free)|||||||||
||||Immersion Time: 4±1sec|||||||||
||1-1-4|Terminal Strength Test<br>Appearance: No damage|Refer AEC-Q200-006|||||||||
||||Soldered on PCB for testing as fig.|||||||||
||||Force : 1.8kg|||||||||
||||KeepingTime: 60 seconds.|||||||||
||1-1-5|Resistance to Solvent<br>There must be no change in|Refer to MIL-STD-202 Method 215|||||||||
|||appearance or obliteration of|Inductors must withstand 6 mimutes of alcohol or water||||Inductors must withstand 6 mimutes of alcohol or water|||||
|||marking|Sample Size : 15pcs|||||||||
||1-1-6|Vibration<br>Appearance: No damage|Refer MIL-STD-202 Method 204|||||||||
|||Inductance change shall be|Vibration waveform: Sine waveform|||||||||
|||within ±10%.|Vibration frequency: 10Hz~2000Hz|||||||||
||||Vibration acceleration: 5g|||||||||
||||Sweep rate: 0.764386otcave/minute|||||||||
||||Duration of test: 12 cycles each of 3 orientations,|Duration of test: 12 cycles each of 3 orientations,||||||||
||||20 minutes for each cycle|||||||||
||||Vibration axes: X,Y & Z|||||||||
||**1-2.Environmental Performance**|||||||||||
||**No**<br>**Item**<br>**Specification**<br>1-2-1 Temperature Cycle<br>Appearance: No damage<br>Refer to JESD Method JA-104<br>Inductance change shall be<br>Total cycles: 1000 cycles<br>within±30%<br>Temperature Cycling Test Conditions : -40 to +125℃<br>-40℃Soak Mode Condition :  30 minutes<br>125℃Soak Mode Condition :  30 minutes<br>Measured after exposure in the room condition for 24hrs<br>1-2-2 Biased Humidity Resistance<br>Refer to MIL-STD-202 Method 103<br>Temperature: 85±2℃<br>Relative Humidity:85% / Time: 1000hrs<br>Measured after exposure in the room condition for 24hrs<br>1-2-3 High<br>Refer to MIL-STD-202 Method 108<br>Temperature Exposure<br>Temperature: 125±3℃<br>(Storage)<br>Time: 1000hrs<br>Measured after exposure in the room condition for 24hrs<br>1-2-4 Operational Life<br>Refer to MIL-STD-202 Method 108<br>Temperature: 125±3℃<br>Applied Current : Rated Current<br>Time: 1000hrs<br>Measured after exposure in the room condition for 24hrs<br>**Test Method**<br>~~——~~|||||||||||



AEC-Q200 

## **APSD00060530 Series Specification** 

## Reflow Soldering Profile 

AEC-Q200 

## **APSD00060530 Series Specification** 

## ~~_|~~ **10 Packaging: 10.1 Packaging -Cover Tape** 

The force for tearing off cover tape is 10 to 130 grams in the arrow direction. 

## **10.2 Packaging Quantity** 

## **10.3 Reel Dimensions** 

AEC-Q200 

## **APSD00060530 Series Specification** 

**==> picture [84 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 Packaging:<br>**----- End of picture text -----**<br>


## **10.4 Tape Dimensions in mm** 

## **11 Recommended Land Pattern:** 

## **12 Note:** 

1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 

2. Do not knock nor drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from  such agreement. 

4. Please keep the distance between transformer/coil and other components (refer to the standard IEC 950) 

5. The moisture sensitivity level (MSL) of products is classified as level 1. 

AEC-Q200 

## **APSD00060530 Series Specification** 

**13 Graph:** APSD000605301R0 `□` 00 

## APSD000605301R2 `□` 00 

## APSD000605301R5 `□` 00 

APSD000605301R8 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

**13 Graph:** APSD000605302R0 `□` 00 

## APSD000605302R2 `□` 00 

APSD000605302R7 `□` 00 

## APSD000605303R3 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

## **13 Graph:** APSD000605303R9 `□` 00 

## APSD000605304R7 `□` 00 

## APSD000605305R6 `□` 00 

## APSD000605306R8 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

## **13 Graph:** ~~_|~~ APSD000605308R2 `□` 00 

## APSD00060530100 `□` 00 

## APSD00060530120 `□` 00 

APSD00060530150 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

## **13 Graph:** APSD00060530180 `□` 00 

## APSD00060530220 `□` 00 

## APSD00060530270 `□` 00 

APSD00060530330 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

## **13 Graph:** 

APSD00060530390 `□` 00 

APSD00060530470 `□` 00 

APSD00060530560 `□` 00 

## APSD00060530680 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

**13 Graph:** APSD00060530820 `□` 00 

## APSD00060530101 `□` 00 

## APSD00060530121 `□` 00 

## APSD00060530151 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

**13 Graph:** APSD00060530181 `□` 00 

APSD00060530221 `□` 00 

APSD00060530271 `□` 00 

APSD00060530331 `□` 00 

AEC-Q200 

## **APSD00060530 Series Specification** 

**13 Graph:** APSD00060530391 `□` 00 

## APSD00060530471 `□` 00

Updated at June 10, 2026

Pulse Electronics, a YAGEO company, is a global leader in the design and manufacturing of passive electronic components. With a legacy of innovation dating back to 1956, the company provides essential technology for the communications, computing, industrial, transportation, and IoT sectors. Pulse is recognized worldwide for delivering high-performance solutions that power advanced applications, ranging from 5G networks and electric vehicles to data centers and smart grids. The company's extensive product portfolio is heavily anchored in power and networking magnetics. This includes a comprehensive range of power inductors engineered for exceptional efficiency and reliability in demanding environments. To address complex electromagnetic compatibility challenges, Pulse also manufactures highly effective EMC and RFI suppression solutions, such as common mode chokes and filters, alongside specialized toroidal and RF inductors designed to ensure clean power delivery and optimal signal integrity. Beyond traditional magnetics, Pulse excels in the development of advanced wireless and power conversion components. Their connectivity solutions feature a wide array of high-performance RF antennas and single-band chip antennas tailored for modern connected devices. Furthermore, to support sophisticated power architectures, Pulse provides a broad spectrum of transformers—encompassing PCB-mounted designs, current sensing transformers, and precise pulse transformers—equipping engineers with robust, industry-proven components for power isolation and measurement.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →