APSC00060620100MS0

Power Inductor (SMD), 10 µH, Shielded, 1.2 A, APSC Series

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: PULSE ELECTRONICS
Product type: SMD Power Inductors
SVHC: No SVHC (04-Feb-2026)
Inductance: 10µH
Product Range: APSC Series
Product Width: 5.7mm
Product Height: 2mm
Product Length: 5.7mm
DC Resistance Max: 0.124ohm
RMS Current (Irms): -
Power Inductor Case: 5.7mm x 5.7mm x 2mm
Inductance Tolerance: ± 20%
Inductor Construction: Shielded
Saturation Current (Isat): 1.2A

Delivery and price
Units per pack	6000
Price	0.291 €
Current stock	10+
Lead time	30 days

Datasheet

## **Power Inductor Automotive Grade APSC Series** 

## **Overview** 

Power inductors are passive electronic components used in various circuits to store energy in a magnetic field when electrical current flows through them. They are critical in filtering, energy storage, and noise suppression in power electronic systems. 

They are designed to handle higher currents and are optimized for minimal power loss and thermal efficiency. 

## **Benefits** 

1. Automotive grade available 

2. Ferrite SMD Shielded Type 

3. No thermal aging 

## **Applications** 

1. Automotive Systems for Infotainment, Dashboard, ADAS 

2. IPC Equipment 

3. Net working 

## **Product Information** 

|**Series**|**L (mm)**|**W(mm)**|**T (mm)**|**Inductance (**µ**H)**|
|---|---|---|---|---|
|APSC|3.2|3.2|1.6|0.47 ~ 1000|
||4.0|4.0|1.8||
||4.0|4.0|3.0||
||4.7|4.7|2.0||
||4.7|4.7|3.0||
||4.7|4.7|4.0||
||5.7|5.7|2.0||
||5.7|5.7|3.0||
||6.7|6.7|3.0||
||7.0|7.0|4.0||
||7.5|7.5|4.6||
||10.3|10.5|3.1||
||10.3|10.5|4.0||
||10.3|10.5|5.1||
||12.5|12.5|4.5||
||12.5|12.5|6.0||
||12.5|12.5|8.0||



AEC-Q200 

## **APSC00060620 Series Specification** 

~~_|~~ **1 Scope:** This specification applies to SMD Shielded Power Inductors 

**==> picture [122 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 [Part Numbering: ]<br>_|<br>**----- End of picture text -----**<br>


**==> picture [66 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
3 Rating:<br>_|<br>**----- End of picture text -----**<br>


Operating Temperature: －40 `℃` ～＋125 `℃` (Including self temp. rise) 

Storage Temperature: －40 `℃` ～＋125 `℃` (For after the circuit board is mounted) Storage Temperature: (on tape & reel): -20°C to +40°C; 75% RH max. **4 Marking:** ~~_|~~ 

**==> picture [182 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
5 [Standard Testing Condition]<br>_|<br>**----- End of picture text -----**<br>


||Unless otherwise specified|In case of doubt|
|---|---|---|
|Temperature|OrdinaryTemperature(15 to 35℃)|20 to 30℃|
|Humidity|OrdinaryHumidity(25 to 85% RH)|50 to 80 %RH|



**APSC00060620 Series Specification** 

AEC-Q200 

## **6 Configuration and Dimensions and Unit Weight:** 

## **Net Weight (grms)** 

## **7 Electrical Characteristics:** 

|**Part No.**|**Inductance**|**Test Freq.**|**RDC**|**Isat(A)**|**Tolerance**|**Marking**|
|---|---|---|---|---|---|---|
||**(uH)**||**(**Ω**)Max.**|**Max(Typ)**|**(±%)**||
|APSC000606201R0□S0|1|10 kHz,1 V|0.038|2.80(3.50)|30|1R0|
|APSC000606201R5□S0|1.5|10 kHz,1 V|0.038|2.50(3.00)|30|1R5|
|APSC000606202R0□S0|2|10 kHz,1 V|0.045|2.10(2.60)|30|2R0|
|APSC000606202R2□S0|2.2|10 kHz,1 V|0.048|2.00(2.50)|30|2R2|
|APSC000606203R3□S0|3.3|10 kHz,1 V|0.056|1.70(2.00)|30|3R3|
|APSC000606204R1□S0|4.1|10 kHz,1 V|0.057|1.55(1.90)|30|4R1|
|APSC000606204R7□S0|4.7|10 kHz,1 V|0.076|1.35(1.70)|30|4R7|
|APSC000606205R4□S0|5.4|10 kHz,1 V|0.076|1.20(1.50)|30|5R4|
|APSC000606206R2□S0|6.2|10 kHz,1 V|0.096|1.10(1.40)|30|6R2|
|APSC000606206R8□S0|6.8|10 kHz,1 V|0.1|1.00(1.30)|30|6R8|
|APSC000606208R9□S0|8.9|10 kHz,1 V|0.116|0.95(1.25)|30|8R9|
|APSC00060620100□S0|10|10 kHz,1 V|0.124|0.90(1.20)|20,30|100|
|APSC00060620120□S0|12|10 kHz,1 V|0.153|0.90(1.00)|30|120|
|APSC00060620150□S0|15|10 kHz,1 V|0.196|0.80(0.91)|20,30|150|
|APSC00060620180□S0|18|10 kHz,1 V|0.21|0.75(0.90)|30|180|
|APSC00060620220□S0|22|10 kHz,1 V|0.29|0.65(0.80)|20,30|220|
|APSC00060620270□S0|27|10 kHz,1 V|0.33|0.60(0.70)|30|270|
|APSC00060620330□S0|33|10 kHz,1 V|0.386|0.55(0.65)|20,30|330|
|APSC00060620390□S0|39|10 KHz,1 V|0.52|0.48(0.60)|30|390|
|APSC00060620470□S0|47|10 kHz,1 V|0.595|0.44(0.51)|20,30|470|
|APSC00060620560□S0|56|10 kHz,1 V|0.665|0.40(0.50)|30|560|
|APSC00060620680□S0|68|10 kHz,1 V|0.84|0.33(0.43)|30|680|
|APSC00060620820□S0|82|10 kHz,1 V|0.978|0.30(0.41)|30|820|
|APSC00060620101□S0|100|10 kHz,1 V|1.2|0.25(0.36)|20,30|101|



## **NOTE:** □ **-tolerance M=±20% / T=±30%** 

1.Operating temperature range －４０℃ ~ １２５℃ (Including self - temperature rise) 

2.Isat for Inductance drop 35% from its value without current. 

3.RDC test method: place testing device to the 2 solder ends of wounding and test the value. 

4.The actual use current is suggested not to be out of Isat*80% 

**APSC00060620 Series Specification** 

AEC-Q200 

**8 APSC00060620 Series** ~~_|~~ **8.1 Construction:** 

## **8.2 Material List:** 

AEC-Q200 

## **APSC00060620 Series Specification** 

|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~|**9**<br>**Reliability Of Ferrite Wire Wound Power Inductor**<br>**1-1.Mechanical Performance**<br>**No**<br>**Item**<br>**Specification**<br>**Test Method**<br>~~__|ee~~||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
||1-1-1 Board Flex<br>The forces applied on the right<br>Refer to AEC-Q200-005<br>conditions must not damage Test device shall be soldered on the substrate<br>the terminal electrode and the Substrate Dimension: 100x40x1.6mm<br>ferrite<br>Deflection: 2.0mm<br>KeepingTime: 60sec<br>~~a~~|||||||||||
||1-1-2|Resistance to Soldering Heat Appearance: No damage|Refer to MIL-STD-202 Method 210|||||||||
|||Inductance change shall be|Pre-heating: 150℃, 1min|||||||||
|||within ±10%.|Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free)|||||||||
||||Solder Temperature: 250±5℃|||||||||
||||Immersion Time: 10±1sec|||||||||
||1-1-3|Solder ability<br>The electrodes shall be at|Refer to J-STD-002|||||||||
|||least 95% covered with new|Pre-heating: 150℃, 1min|||||||||
|||solder coating|Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free)|||||||||
||||Solder Temperature: 245±5℃(Pb-Free)|||||||||
||||Immersion Time: 4±1sec|||||||||
||1-1-4|Terminal Strength Test<br>Appearance: No damage|Refer AEC-Q200-006|||||||||
||||Soldered on PCB for testing as fig.|||||||||
||||Force : 1.8kg|||||||||
||||KeepingTime: 60 seconds.|||||||||
||1-1-5|Resistance to Solvent<br>There must be no change in|Refer to MIL-STD-202 Method 215|||||||||
|||appearance or obliteration of|Inductors must withstand 6 mimutes of alcohol or water||||Inductors must withstand 6 mimutes of alcohol or water|||||
|||marking|Sample Size : 15pcs|||||||||
||1-1-6|Vibration<br>Appearance: No damage|Refer MIL-STD-202 Method 204|||||||||
|||Inductance change shall be|Vibration waveform: Sine waveform|||||||||
|||within ±10%.|Vibration frequency: 10Hz~2000Hz|||||||||
||||Vibration acceleration: 5g|||||||||
||||Sweep rate: 0.764386otcave/minute|||||||||
||||Duration of test: 12 cycles each of 3 orientations,|Duration of test: 12 cycles each of 3 orientations,||||||||
||||20 minutes for each cycle|||||||||
||||Vibration axes: X,Y & Z|||||||||
||**1-2.Environmental Performance**|||||||||||
||**No**<br>**Item**<br>**Specification**<br>1-2-1 Temperature Cycle<br>Appearance: No damage<br>Refer to JESD Method JA-104<br>Inductance change shall be<br>Total cycles: 1000 cycles<br>within±30%<br>Temperature Cycling Test Conditions : -40 to +125℃<br>-40℃Soak Mode Condition :  30 minutes<br>125℃Soak Mode Condition :  30 minutes<br>Measured after exposure in the room condition for 24hrs<br>1-2-2 Biased Humidity Resistance<br>Refer to MIL-STD-202 Method 103<br>Temperature: 85±2℃<br>Relative Humidity:85% / Time: 1000hrs<br>Measured after exposure in the room condition for 24hrs<br>1-2-3 High<br>Refer to MIL-STD-202 Method 108<br>Temperature Exposure<br>Temperature: 125±3℃<br>(Storage)<br>Time: 1000hrs<br>Measured after exposure in the room condition for 24hrs<br>1-2-4 Operational Life<br>Refer to MIL-STD-202 Method 108<br>Temperature: 125±3℃<br>Applied Current : Rated Current<br>Time: 1000hrs<br>Measured after exposure in the room condition for 24hrs<br>**Test Method**<br>~~——~~|||||||||||



AEC-Q200 

## **APSC00060620 Series Specification** 

## Reflow Soldering Profile 

AEC-Q200 

## **APSC00060620 Series Specification** 

## **10 Packaging:** 

## **10.1 Packaging -Cover Tape** 

The force for tearing off cover tape is 10 to 130 grams in the arrow direction. 

## **10.2 Packaging Quantity** 

## **10.3 Reel Dimensions** 

AEC-Q200 

## **APSC00060620 Series Specification** 

**==> picture [84 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 Packaging:<br>**----- End of picture text -----**<br>


## **10.4 Tape Dimensions in mm** 

**==> picture [186 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
11 Recommended Land Pattern:<br>**----- End of picture text -----**<br>


**12 Note:** 

1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 

2. Do not knock nor drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from  such agreement. 

4. Please keep the distance between transformer/coil and other components (refer to the standard IEC 950) 

5. The moisture sensitivity level (MSL) of products is classified as level 1. 

AEC-Q200 

## **APSC00060620 Series Specification** 

## **13 Graph:** 

## APSC000606201R0□S0 

APSC000606201R5□S0 

## APSC000606202R2□S0 

APSC00060620101□S0 

AEC-Q200 

## **APSC00060620 Series Specification** 

## **13 Graph:** 

APSC000606203R3□S0 

APSC000606204R1□S0 

## APSC000606204R7□S0 

APSC000606205R4□S0 

AEC-Q200 

## **APSC00060620 Series Specification** 

## **13 Graph:** 

## APSC000606206R2□S0 

APSC000606206R8□S0 

APSC000606208R9□S0 

APSC00060620100□S0 

AEC-Q200 

## **APSC00060620 Series Specification** 

**13 Graph:** APSC00060620120□S0 

## APSC00060620150□S0 

## APSC00060620180□S0 

APSC00060620220□S0 

AEC-Q200 

## **APSC00060620 Series Specification** 

## **13 Graph:** 

APSC00060620270□S0 

APSC00060620330□S0 

APSC00060620390□S0 

APSC00060620470□S0 

AEC-Q200 

## **APSC00060620 Series Specification** 

## **13 Graph:** 

APSC00060620560□S0 

APSC00060620680□S0 

APSC00060620820□S0

Updated at June 10, 2026

Pulse Electronics, a YAGEO company, is a global leader in the design and manufacturing of passive electronic components. With a legacy of innovation dating back to 1956, the company provides essential technology for the communications, computing, industrial, transportation, and IoT sectors. Pulse is recognized worldwide for delivering high-performance solutions that power advanced applications, ranging from 5G networks and electric vehicles to data centers and smart grids. The company's extensive product portfolio is heavily anchored in power and networking magnetics. This includes a comprehensive range of power inductors engineered for exceptional efficiency and reliability in demanding environments. To address complex electromagnetic compatibility challenges, Pulse also manufactures highly effective EMC and RFI suppression solutions, such as common mode chokes and filters, alongside specialized toroidal and RF inductors designed to ensure clean power delivery and optimal signal integrity. Beyond traditional magnetics, Pulse excels in the development of advanced wireless and power conversion components. Their connectivity solutions feature a wide array of high-performance RF antennas and single-band chip antennas tailored for modern connected devices. Furthermore, to support sophisticated power architectures, Pulse provides a broad spectrum of transformers—encompassing PCB-mounted designs, current sensing transformers, and precise pulse transformers—equipping engineers with robust, industry-proven components for power isolation and measurement.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →