AMANT3216120A5T
Ceramic Chip Antenna, 2.45GHz, 2dBi, 3.2mm x 1.6mm x 1.2mm
- Manufacturer: MULTICOMP PRO
- Product type: Antennas - Single Band Chip
- SVHC: No SVHC (04-Feb-2026)
- Product Range: AMANT Series
- Centre Frequency: 2.45GHz
- Antenna Case Size: 3.2mm x 1.6mm x 1.2mm
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.452 € |
| Current stock | 1000+ |
| Lead time | 30 days |
**Multi Layer Ceramic Chip Antenna 2012 (0805) Size**
## **Features**
- LTCC process
- High stability in Temperature / Humidity Change
- Automotive, Qualified to AEC-Q200
- Surface Mounted Devices with a small dimension of 3.2mm×1.6mm×1.2mm³ meet future miniaturization trend.
## **Applications**
- 2400 ~ 2500 MHz working frequency
- Bluetooth
- Wireless LAN
- Home RF
## **Electrical Characteristics**
Working Frequency Range : 2400MHz ~ 2500MHz Fc : 2.9GHz Gain : 2 dBi (Typical) VSWR : 2 max. Matching Component Value : Series 1: 6.8nH Series 2: - Power Capacity : 3W max. Maximum Input Power : 5 Watts for 5 minutes Polarization : Linear Azimuth Beam width : Omni-directional Moisture Sensitivity Levels : MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020) HBM ESD : Pass 1KV on all pins (Base on AEC-Q200-002) MM ESD : Pass 200V (Base on EIA/JESD22-A115) Operation & Storage Temp. Range : -55°C to +125°C Storage Temperature Range : +5°C to +40°C Humidity : 30 to 70% relative humidity
## **Solder Land Pattern Design**
Dimensions : Millimetres
Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro
16/04/26 V1.0
Page <1>
## **Multi Layer Ceramic Chip Antenna 2012 (0805) Size**
## **Construction**
|**Pin**|**Connection**|
|---|---|
|P1|Feeding|
|P2|Identification Mark|
|P3|Solderingterminal|
## **Dimensions**
|**Symbol**|**Dimension(mm)**|
|---|---|
|L|3.2 ±0.2|
|W|1.6 ±0.1|
|T|1.2 ±0.1|
|A|0.25 ±0.15|
## **Antenna on Test Board (Thickness 1.2mm)**
**==> picture [343 x 7] intentionally omitted <==**
**----- Start of picture text -----**<br>
Antenna S11 on Test Board Antenna VSWR on Test Board<br>**----- End of picture text -----**<br>
Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro
16/04/26 V1.0
Page <2>
## **Multi Layer Ceramic Chip Antenna 2012 (0805) Size**
## **Radiation Pattern**
Radiation Pattern and Gain were dependent on measurement board design. The specification of AMANT3216120A5T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board
**==> picture [319 x 258] intentionally omitted <==**
**----- Start of picture text -----**<br>
Vertical Horizontal<br>129 a =~ 60 10<br>180 /yy “10v ~~ Vf010<br>/ 20Y \ 3° 150/ ty<br>Y - Z<br>Plane 180 { o>, Ie 180 { 40<br>210 \ / 330 20,<br>Average Gain = 0.948dBi<br>240 ——270 300 240 270*<br>Peak Gain = 2.93dBi Peak Gain= -5.60dBi<br>Average Gain = 0.60dBi Average Gain=-10.19dBi<br>vu<br>120 —) 7 _bu 90<br>10/ \* 0 /,<br>X - Z 180 [ \<br>Plane |\je 180 |<br>Average Gain= -2.147 dBi mA240a —— ~~ 300y/ 210 SS240 a<br>Average Gain=Peak Gain=A -4.98-9.68dBidBi. PeakAverage Gain=Gain= roan1.61-2.99dBi dBi.<br>120 —5 90> —~ 0 0 ~~<br>150 /V4 2010 30 150 Va<br>| -30- \<br>X - Y<br>Plane 180 | xBai bo 180 y<br>Average Gain= -2.810 dBi<br>**----- End of picture text -----**<br>
## **Part Number Table**
|**Part Number Table**||
|---|---|
|**Description**|**Part Number**|
|Ceramic ChipAntenna, 2.45GHz, 2dBi|AMANT3216120A5T|
**Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.
Newark.com/multicomp-pro
Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro
16/04/26 V1.0
Page <3>
Updated at April 22, 2026
Multicomp Pro is a trusted manufacturer of high-quality electronic components, built upon the rich heritage of established industry names such as SPC Technology, Tenma, Duratool, and Pro Power. Developed to provide engineers and procurement professionals with exceptional value, the brand offers an extensive portfolio of rigorously lab-tested products. By combining strict quality assurance with cost-effective manufacturing, Multicomp Pro delivers premium reliability while providing significant savings compared to leading industry alternatives. The brand's comprehensive lineup is anchored by a vast selection of passive components and essential circuit protection devices. Engineers consistently rely on Multicomp Pro for aluminum electrolytic capacitors, film capacitors, and power inductors designed for demanding applications. The protection portfolio is equally robust, featuring hundreds of standard fuses, resettable fuses, and transient voltage suppression (TVS) diodes to safeguard critical circuitry. Furthermore, the company is a major provider of precision timing solutions, including a wide array of reliable crystals and standard oscillators. Beyond passives and board-level protection, Multicomp Pro offers extensive solutions in power management, discrete semiconductors, and connectivity. This includes highly efficient AC/DC converters, bridge rectifiers, bipolar transistors, and a versatile selection of wire-to-board terminal blocks. Backed by comprehensive factory audits, continuous laboratory testing, and a strong commitment to ethical sourcing, Multicomp Pro ensures that every component consistently meets stringent international safety and performance standards.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →