Image not available
Illustrative purposes only
92.03
Relay Socket, DIN Rail, Panel, Screw, 11 Pins, 16 A, 250 V, 92 Series
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: FINDER
- Product type: Relay Sockets
- Socket Mounting:DIN Rail, Panel; Socket Terminals:Screw; No. of Pins:11Pins; Current Rating:16A; Voltage Rating:250V; Product Range:92 Serie; Available until stocks are exhausted
- SVHC: No SVHC (25-Jun-2025)
- No. of Pins: 11Pins
- Product Range: 92 Series
- Current Rating: 16A
- Voltage Rating: 250V
- Socket Mounting: DIN Rail, Panel
- Socket Terminals: Screw
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 9.74 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
62 SERIES 62 Series - Power relays 16 A A ## Features ## 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 A Power relay - 2 & 3 Pole changeover contacts or NO - (≥ 3 mm contact gap) - AC coils & DC coils - Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance - SELV coil-contact separator option - Cadmium Free contact material options - 2 & 3 pole changeover contact - PCB mount - 2 & 3 pole normally open contact (≥3 mm contact gap) - PCB mount - Distance between contacts ≥ 3 mm (EN 60730-1). - **With the AgSnO2 material the maximum peak current is 120 A - 5 ms (NO contact). _FOR UL RATINGS SEE:_ _“General technical information” page_ V **==> picture [520 x 410] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||||| |---|---|---|---|---|---|---|---| |62.22 62.23 62.22 - 0300 62.23 - 0300| |For outline drawing see page 10|Copper side view Copper side view Copper side view Copper side view| |Contact specification| |Contact configuration|2 CO (DPDT) 3 CO (3PDT)|2 NO (DPST-NO), ≥|3 mm* 3 NO (3PST-NO), ≥|3 mm*| |Rated current/Maximum peak current A|16/30** 16/30**| |Rated voltage/Maximum switching voltage V AC|250/400 250/400| |Rated load AC1 VA|4,000 4,000| |Rated load AC15 (230 V AC) VA|750 750| |Motor rating (230/400 V AC) kW|0.8/— 0.8/1.5 0.8/— 0.8/1.5| |Breaking capacity DC1: 30/110/220 V A|16/0.6/0.4 16/1.1/0.7| |Minimum switching load mW (V/mA)|1,000 (10/10) 1,000 (10/10)| |Standard contact material|AgCdO AgCdO| |Coil specification| |Nominal voltage (UN) V AC (50/60 Hz)|6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400| |V DC|6 - 12 - 24 - 48 - 60 - 110 - 125 - 220| |Rated power AC/DC VA (50 Hz)/W|2.2/1.3 3/3| |Operating range AC|(0.8…1.1)UN|(0.85…1.1)UN| |DC|(0.8…1.1)UN (0.85…1.1)UN| |Holding voltage AC/DC|0.8 UN/0.6 UN 0.8 UN/0.6 UN| |Must drop-out voltage AC/DC|0.2 UN/0.1 UN 0.2 UN/0.1 UN| |Technical data| |Mechanical life AC/DC cycles|10 · 106/30 · 106 10 · 106/30 · 106| |Electrical life at rated load AC1 cycles|100 · 103 100 · 103| |Operate/release time ms|11/4 15/3| |Insulation between coil and contacts (1.2/50 μs) kV 6 6| |Dielectric strength between open contacts V AC|1,500 2,500| |Ambient temperature range °C|–40…+70 –40…+50| |Environmental protection|RT I RT I| |Approvals (according to type)|GH|&|®|TlovdsEB|rn|Ms®|—| **----- End of picture text -----**<br> 1 62 SERIE S 62 Series - Power relays 16 A ## Features ## 62.32 / 62.33 62.32-0300 / 62.33-0300 ## Plug-in mount/Faston 187 A 16 A Power relay - Plug-in (92 series sockets) or Faston 187 - (4.8x0.5 mm) with optional mounting adaptors - 2 & 3 Pole changeover contacts or NO - (≥ 3 mm contact gap) - AC coils & DC coils - UL Listing (certain relay/socket combinations) - LED, mechanical indicator & test button options - Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance - 2 & 3 pole changeover contact - Plug-in / Faston 187 - 2 & 3 pole normally open contact - (≥3 mm contact gap) - Plug-in / Faston 187 - SELV coil-contact separator option - Cadmium Free contact material options - Sockets and accessories - European Patent - Distance between contacts ≥ 3 mm (EN 60730-1). - **With the AgSnO2 material the maximum peak current is 120 A - 5 ms (NO contact). ## _FOR UL RATINGS SEE:_ _“General technical information” page_ V 62.32 62.33 62.32-0300 62.33-0300 For outline drawing see page 10 **==> picture [519 x 385] intentionally omitted <==** **----- Start of picture text -----**<br> |||||||| |---|---|---|---|---|---|---| |Contact specification| |Contact configuration|2 CO (DPDT) 3 CO (3PDT) 2 NO (DPST-NO), ≥|3 mm* 3 NO (3PST-NO), ≥|3 mm*| |Rated current/Maximum peak current A|16/30** 16/30**| |Rated voltage/Maximum switching voltage V AC|250/400 250/400| |Rated load AC1 VA|4,000 4,000| |Rated load AC15 (230 V AC) VA|750 750| |Motor rating (230/400 V AC) kW|0.8/— 0.8/1.5 0.8/— 0.8/1.5| |Breaking capacity DC1: 30/110/220 V A|16/0.6/0.4 16/1.1/0.7| |Minimum switching load mW (V/mA)|1,000 (10/10) 1,000 (10/10)| |Standard contact material|AgCdO AgCdO| |Coil specification| |Nominal voltage (UN) V AC (50/60 Hz)|6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400| |V DC|6 - 12 - 24 - 48 - 60 - 110 - 125 - 220| |Rated power AC/DC VA (50 Hz)/W|2.2/1.3 3/3| |Operating range AC|(0.8…1.1)UN|(0.85…1.1)UN| |DC|(0.8…1.1)UN (0.85…1.1)UN| |Holding voltage AC/DC|0.8 UN/0.6 UN 0.8 UN/0.6 UN| |Must drop-out voltage AC/DC|0.2 UN/0.1 UN 0.2 UN/0.1 UN| |Technical data| |Mechanical life AC/DC cycles|10 · 106/30 · 106 10 · 106/30 · 106| |Electrical life at rated load AC1 cycles|100 · 103 100 · 103| |Operate/release time ms|11/4 15/3| |Insulation between coil and contacts (1.2/50 μs) kV 6 6| |Dielectric strength between open contacts V AC|1,500 2,500| |Ambient temperature range °C|–40…+70 –40…+50| |Environmental protection|RT I RT I| |Approvals (according to type)|ce|GH|&|®|RINA|AYys| **----- End of picture text -----**<br> 2 62 SERIES 62 Series - Power relays 16 A A ## Features ## 62.82 / 62.83 62.82-0300 / 62.83-0300 Flange mount/Faston 250 16 A Power relay - Faston 250 (6.3x0.8 mm) termination Flange - or optional mounting adaptors - 2 & 3 Pole changeover contacts or NO - (≥ 3 mm contact gap) - AC coils & DC coils - LED, mechanical indicator & test button options - Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance - SELV coil-contact separator option • 2 & 3 pole changeover contact - Flange mount / Faston 250 - 2 & 3 pole normally open contact (≥3 mm contact gap) - Flange mount / Faston 250 - Cadmium Free contact material options - European Patent - Distance between contacts ≥ 3 mm (EN 60730-1). - **With the AgSnO2 material the maximum peak current is 120 A - 5 ms (NO contact). - _FOR UL RATINGS SEE:_ _“General technical information” page_ V |_“General technical information” page_|_“General technical information” page_V||||||| |---|---|---|---|---|---|---|---| |||62.82|62.83||||62.82-0300<br>62.83-0300| |For outline drawing see page 10|||||||| |Contact specification|||||||| |Contact configuration||2 CO (DPDT) 3 CO (3PDT)||2 CO (DPDT) 3 CO (3PDT)|2 CO (DPDT) 3 CO (3PDT)2 NO (DPST-NO),≥3 mm*3 NO (3PST-NO),≥3 mm*||| |Rated current/Maximum peak current A||16/30** 16/30**|16/30** 16/30**|16/30** 16/30**|16/30** 16/30**|16/30** 16/30**|16/30** 16/30**| |Rated voltage/Maximum switching voltage V AC||250/400 250/400|250/400 250/400|250/400 250/400|250/400 250/400|250/400 250/400|250/400 250/400| |Rated load AC1 VA|Rated load AC1 VA|4,000 4,000|4,000 4,000|4,000 4,000|4,000 4,000|4,000 4,000|4,000 4,000| |Rated load AC15 (230 V AC) VA|Rated load AC15 (230 V AC) VA|750 750|750 750|750 750|750 750|750 750|750 750| |Motor rating (230/400 V AC) kW|Motor rating (230/400 V AC) kW|0.8/— 0.8/1.5 0.8/— 0.8/1.5||0.8/— 0.8/1.5 0.8/— 0.8/1.5|0.8/— 0.8/1.5 0.8/— 0.8/1.5|0.8/— 0.8/1.5 0.8/— 0.8/1.5|0.8/— 0.8/1.5 0.8/— 0.8/1.5| |Breaking capacity DC1: 30/110/220 V A||16/0.6/0.4 16/1.1/0.7|16/0.6/0.4 16/1.1/0.7|16/0.6/0.4 16/1.1/0.7|16/0.6/0.4 16/1.1/0.7|16/0.6/0.4 16/1.1/0.7|16/0.6/0.4 16/1.1/0.7| |Minimum switching load mW (V/mA)||1,000 (10/10) 1,000 (10/10)|1,000 (10/10) 1,000 (10/10)|1,000 (10/10) 1,000 (10/10)|1,000 (10/10) 1,000 (10/10)|1,000 (10/10) 1,000 (10/10)|1,000 (10/10) 1,000 (10/10)| |Standard contact material||AgCdO AgCdO|AgCdO AgCdO|AgCdO AgCdO|AgCdO AgCdO|AgCdO AgCdO|AgCdO AgCdO| |Coil specification|||||||| |Nominal voltage (UN) V AC (50/60 Hz)||6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400|||||| |V DC|V DC|6 - 12 - 24 - 48 - 60 - 110 - 125 - 220|||||| |Rated power AC/DC VA (50 Hz)/W||2.2/1.3 3/3|2.2/1.3 3/3|2.2/1.3 3/3|2.2/1.3 3/3|2.2/1.3 3/3|2.2/1.3 3/3| |Operating range AC|Operating range AC|(0.8…1.1)UN|||||(0.85…1.1)UN| |DC|DC|(0.8…1.1)UN(0.85…1.1)U|(0.85…1.1)U|(0.85…1.1)U|(0.85…1.1)U|(0.85…1.1)U|(0.85…1.1)UN| |Holding voltage AC/DC|Holding voltage AC/DC|0.8 UN/0.6 UN0.8 U|0.8 U|0.8 U|0.8 U|0.8 U|0.8 UN/0.6 UN| |Must drop-out voltage AC/DC|Must drop-out voltage AC/DC|0.2 UN/0.1 UN0.2 U|0.2 U|0.2 U|0.2 U|0.2 U|0.2 UN/0.1 UN| |Technical data|||||||| |Mechanical life AC/DC cycles|Mechanical life AC/DC cycles|10 · 10<br>6/30 · 10|610 · 10|10 · 10|10 · 10|10 · 10|10 · 10<br>6/30 · 10<br>6| |Electrical life at rated load AC1 cycles|Electrical life at rated load AC1 cycles|100 · 10<br>3100 · 10|100 · 10|100 · 10|100 · 10|100 · 10|100 · 10<br>3| |Operate/release time ms|Operate/release time ms|11/4 15/3|11/4 15/3|11/4 15/3|11/4 15/3|11/4 15/3|11/4 15/3| |Insulation between coil and contacts (1.2/50 μs)kV<br>Dielectric strength between open contacts V AC<br>Ambient temperature range °C<br>Environmental protection<br>Approvals(according to type)||6 6<br>1,500 2,500<br>–40…+70 –40…+50<br>RT I RT I<br>kV<br>ceGH|6 6<br>1,500 2,500<br>–40…+70 –40…+50<br>RT I RT I<br>GH&~~®~~|6 6<br>1,500 2,500<br>–40…+70 –40…+50<br>RT I RT I<br>~~®~~|6 6<br>1,500 2,500<br>–40…+70 –40…+50<br>RT I RT I|6 6<br>1,500 2,500<br>–40…+70 –40…+50<br>RT I RT I|6 6<br>1,500 2,500<br>–40…+70 –40…+50<br>RT I RT I<br>RINASAYs| For outline drawing see page 10 3 62 SERIE S 62 Series - Power relays 16 A ## Features ## 62.31-4800 62.32-4800 Plug-in mount/Faston 187 A Magnetic blow power relay - Plug-in (92 series sockets) or Faston 187 - (4.8x0.5 mm) with optional mounting adaptors - 1 & 2 Pole NO contacts - High DC load (resistive and inductive) - switching capability - DC coils - Reinforced insulation between coil and contacts according to EN 60335-1, with 6 mm clearance & 8 mm creepage distance - Cadmium Free contact material - 1 pole normally open contact (double break, ≥ 4.2 mm contact gap) - Plug-in / Faston 187 - 2 pole normally open contact (≥2.1 mm contact gap) - Plug-in / Faston 187 - Sockets and accessories - Maximum peak current 120 A - 5 ms. 62.31-4800 62.32-4800 For outline drawing see page 10 |Contact specification|||| |---|---|---|---| |Contact configuration|1 NO (SPST-NO) double break, ≥ 4.2 mm 2 NO (DPST-NO), ≥ 2.1 mm|1 NO (SPST-NO) double break, ≥ 4.2 mm 2 NO (DPST-NO), ≥ 2.1 mm|1 NO (SPST-NO) double break, ≥ 4.2 mm 2 NO (DPST-NO), ≥ 2.1 mm| |Rated current/Maximum peak current A|16/30* 16/30*|16/30*|16/30*| |Rated voltage/Maximum switching voltage V AC|250/400 250/400||250/400 250/400| |Rated load AC1 VA|4,000 4,000|4,000 4,000|4,000 4,000| |Breaking capacity DC1: 30/125/220 V A|16/16/12 16/12/6||| |Breaking capacity DC inductive (L/R = 40 ms):|||| |30/125/220 V A|16/5/3 10/2/1.2||16/5/3 10/2/1.2| |Minimum switching load mW (V/mA)|1,000 (10/10) 1,000 (10/10)||1,000 (10/10) 1,000 (10/10)| |Standard contact material|AgSnO2AgSnO2||| |Coil specification|||| |Nominal voltage (UN) V DC|6 - 12 - 24 - 48 - 60 - 110 - 125 - 220||| |Rated power DC W|1.3 1.3||| |Operating range DC|(0.85…1.1)UN(0.85…1.1)UN||| |Holding voltage DC|0.6 UN0.6 UN||| |Must drop-out voltage DC|0.1 UN0.1 UN||| |Technical data|||| |Mechanical life DC cycles|10 · 10<br>610 · 10<br>6||| |Electrical life at rated load DC1 cycles|100 · 10<br>3100 · 10|3|| |Operate/release time ms|16/5 16/5|16/5 16/5|16/5 16/5| |Insulation between coil and contacts (1.2/50 μs)kV<br>Dielectric strength between open contacts V AC<br>Ambient temperature range °C<br>Environmental protection<br>Approvals(according to type)|6 6<br>3,000 2,000<br>–40…+70 –40…+70<br>RT I RT I<br>kV||–40…+70 –40…+70| 4 62 SERIES 62 Series - Power relays 16 A A ## Ordering information Example: 62 series power relay + Faston 250 (6.3x0.8 mm), rear flange mount, 2 NO (DPST-NO), 12 V DC coil. A B C D 6 2 . 8 2 . 9 . 0 1 2 . 0 3 0 0 is See Sins Series A: Contact material D: Special versions 0 = Standard AgCdO 0 = Standard Type 4 = AgSnO2 (standard 2 = PCB for versions 4800) 3 = Plug-in mount 8 = Faston 250 (6.3x0.8 mm) B: Contact circuit with rear flange mount 0 = CO (nPDT) C: Options 3 = NO (nPST), 0 = None No. of poles ≥ 3 mm contact gap 1 = 1 pole (double break) 5 = CO (nPDT) + additional 3 = LED (AC) 2 = 2 pole physical separator between 3 = 3 pole coil and contacts (for SELV Coil version applications) 8 = AC (50/60 Hz) 6 = NO (nPST), ≥ 3 mm contact 9 = DC gap + additional physical Coil voltage ell separator between coil and I 6* = LED + diode contacts (for SELV See coil specifications applications) - 6 = Rear flange mount - 9 = Type 62.82/83 without rear flange mount - 2 = Mechanical indicator - 4 = Lockable test button + mechanical indicator - 5* = Lockable test button + LED (AC) - 54* = Lockable test button + LED (AC) + mechanical indicator - 6* = LED + diode - (DC, polarity positive to pin A/A1) - 7* = Lockable test button + LED + diode - (DC, polarity positive to pin A/A1) - 8 = NO (1 pole double break or 2 pole) with magnetic blow - 74* = Lockable test button + LED + diode - (DC, polarity positive to pin A/A1) + mechanical indicator **==> picture [285 x 466] intentionally omitted <==** **----- Start of picture text -----**<br> Selecting features and options: only combinations in the same row are possible.<br>Preferred selections for best availability are shown in bold.<br>Type ee Coil version A B C D es ee<br>62.22/23 AC-DC 0 - 4 0 - 3 - 5 - 6 0 0<br>62.32/33 AC-DC 0 - 4 0 - 3 - 5 - 6 0 0 - 6 a<br> AC-DC 0 - 4 0 - 5 2 - 4 0 - 6<br> AC ep 0 - 4 0 2 - 3 - 4 - 5 0 - 6<br> AC 0 - 4 0 - 3 3 0 - 6<br> AC 0 - 4 0 54 ep /<br> DC 0 - 4 0 4 - 6 - 7 0 - 6<br> DC 0 - 4 0 - 3 6 0 - 6 py<br> DC 0 - 4 0 74 /<br>62.31/32 DC ep 4 8 0 0<br>62.82/83 AC-DC ee 0 - 4 0 - 3 - 5 - 6 0 0 - 9<br> AC-DC 0 - 4 0 - 5 2 - 4 0<br> AC 0 - 4 0 2 - 3 - 4 - 5 0<br> AC 0 - 4 0 - 3 3 0 ————<br> DC 0 - 4 0 4 - 6 - 7 0<br> DC 0 - 4 0 - 3 6 0<br>—————<br>Descriptions: Options and Special versions<br>A B @ A BO Li<br>C: Option 3, 5, 54 Option 3, 5, 54 C: Option 6, 7, 74 Option 6, 7, 74 B: Contact circuit 5, 6 Contact circuit 5, 6<br>LED (AC) LED + diode (DC, polarity Additional physical separator<br>positive to pin A/A1) between coil and contacts<br>(for SELV applications)<br>1 3 : Case 1)) The plastic pip (located directly above the test button) remains intact. In this case, when the<br>former state.<br>Case 2)<br>2<br>II-2015, www.findernet.com<br>**----- End of picture text -----**<br> - Options not available for 220 V DC and 400 V AC versions. C: Option 3, 5, 54 Option 3, 5, 54 C: Option 6, 7, 74 Option 6, 7, 74 B: Contact circuit 5, 6 Contact circuit 5, 6 B: Contact circuit 8 LED (AC) LED + diode (DC, polarity Additional physical separator Magnetic blow positive to pin A/A1) between coil and contacts (for SELV applications) Lockable test button and mechanical flag indicator (0040, 0050, 0054, 0070, 0074) The dual-purpose Finder test button can be used in two ways: G ~~:~~ Case 1)) The plastic pip (located directly above the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. E Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive. 5 62 SERIE S 62 Series - Power relays 16 A ## Technical data |A||||||||||| |---|---|---|---|---|---|---|---|---|---|---| ||Insulation according to EN 61810-1|||||||||| ||||2 CO - 3 CO||2 NO - 3 NO||1 NO*||2 NO*|| ||Nominal voltage of supplysystem<br>V AC||230/400||230/400||230/400||230/400|| ||Rated insulation voltage V AC||400||400||400||400|| |||||||||||| ||Pollution degree||3||3||3||3|| ||Insulation between coil and contact set|||||||||| ||Type of insulation||Reinforced||Reinforced||Reinforced||Reinforced|| ||Overvoltage category||III||III||III||III|| ||Rated impulse voltage kV(1.2/50μs)||6||6||6||6|| ||Dielectric strength<br>V AC||4,000||4,000||4,000||4,000|| ||Insulation between adjacent contacts|||||||||| ||Type of insulation||Basic||Basic||—||Basic|| ||Overvoltage category||III||III||—||III|| ||Rated impulse voltage kV(1.2/50μs)||4||4||—||4|| ||Dielectric strength<br>V AC||<br>2,500||2,500||—||2,500|| ||Insulation between open contacts|||||||||| ||Type of disconnection||<br>Micro-disconnection||Full-disconnection||Full-disconnection||Full-disconnection**|| ||Overvoltage category||—||III||III||II|| ||Rated impulse voltage kV(1.2/50μs)||—||4||4||2.5|| ||Dielectric strength V AC/kV (1.2/50 μs)||1,500/2||2,500/4||3,000/4||2,000/2.5|| ||Conducted disturbance immunity|||||||||| ||Burst(5...50)ns, 5 kHz, on A1 - A2||EN 61000-4-4||||level 4(4 kV)|||| ||Surge (1.2/50 μs) on A1 - A2 (differential mode)||EN 61000-4-5||||level 4 (4 kV)|||| ||Other data|||||||||| ||Bounce time: NO/NC|ms|1/5 (changeover)||3/— (normallyopen)||3/— (normallyopen)||3/— (normallyopen)|| ||Vibration resistance(10…150)Hz:|NO/NCg|20/8|||||||| ||Shock resistance|g|15|||||||| ||Power lost to the environment<br> <br>|<br>without contact current W|2pole (CO)|3pole (CO)||2pole (NO)|3pole (NO)|1pole (NO)*||2pole (NO)*| ||||1.3|1.3||3|3|1.3||1.3| |||with rated current W|3.3|4.3||5|6|3||3.3| ||Recommended distance between relays mounted on PCB mm||≥5|||||—||| - Magnetic blow version ** Only in applictaions where over voltage category II is permitted. In applications of over voltage category III: Micro-disconnection. 6 62 SERIES 62 Series - Power relays 16 A A ## Contact specification F 62 - Electrical life (AC) v contact current **==> picture [512 x 527] intentionally omitted <==** **----- Start of picture text -----**<br> Resistive load - cosϕ = 1<br>Inductive load - cosϕ = 0.4<br>H 62 - Maximum DC1 breaking capacity H 62 - Maximum DC1 breaking capacity<br>Changeover contacts Normally open contacts<br>contacts in series contacts in series<br>Voltage DC (V) Voltage DC (V)<br>• When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100·103 can be expected.<br>• In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load.<br>Note: the release time of the load will be increased.<br>H 62 - Maximum DC breaking capacity 62.31.9.xxx.4800 H 62 - Maximum DC breaking capacity 62.32.9.xxx.4800<br>50 50<br>DC1 DC1<br>10 10<br>DC13<br>1 L/R = 40 ms 1 DC13<br>L/R = 40 ms<br>0.1 0.1<br>20 60 100 140 180 220 260 20 60 100 140 180 220 260<br>(V) (V)<br>Voltage DC (V) Voltage DC (V)<br>Cycles<br>DC breaking current (A) DC breeaking current (A)<br>DC breaking current (A) DC breeaking current (A)<br>**----- End of picture text -----**<br> - When switching a resistive load (DC1), or a DC13 load with a diode in parallel to the load, having voltage and current values under the DC1 curve, an electrical life of ≥ 100·10³ can be expected. Note: the release time for the load will be increased. - When switching a DC13 load without a diode in parallel to the load, the DC13 curve applies and an electrical life of ≥ 80·10³ can be expected. 7 62 SERIE S 62 Series - Power relays 16 A ## Coil specifications |A|Nominal Coil Operating range Resistance Rated coil<br>voltage codeconsumption<br>UNUminUmaxRIat UN<br> V V VΩmA<br>69.006 4.8 6.6 28 214<br>129.012 9.6 13.2 110 109<br>249.024 19.2 26.4 445 54<br>489.048 38.4 52.8 1,770 27<br>609.060 48 66 2,760 21.7<br>1109.110 88 121 9,420 11.7<br>1259.125 100 138 12,000 10.4<br>2209.220 176 242 37,300 5.8<br>DC version data<br>|Nominal Coil Operating range Resistance Rated coil<br>voltage codeconsumption<br>UNUminUmaxRIat UN<br> V V VΩmA<br>69.006 4.8 6.6 28 214<br>129.012 9.6 13.2 110 109<br>249.024 19.2 26.4 445 54<br>489.048 38.4 52.8 1,770 27<br>609.060 48 66 2,760 21.7<br>1109.110 88 121 9,420 11.7<br>1259.125 100 138 12,000 10.4<br>2209.220 176 242 37,300 5.8<br>DC version data<br>|Nominal Coil Operating range Resistance Rated coil<br>voltage codeconsumption<br>UNUminUmaxRIat UN<br> V V VΩmA<br>69.006 4.8 6.6 28 214<br>129.012 9.6 13.2 110 109<br>249.024 19.2 26.4 445 54<br>489.048 38.4 52.8 1,770 27<br>609.060 48 66 2,760 21.7<br>1109.110 88 121 9,420 11.7<br>1259.125 100 138 12,000 10.4<br>2209.220 176 242 37,300 5.8<br>DC version data<br>|Nominal Coil Operating range Resistance Rated coil<br>voltage codeconsumption<br>UNUminUmaxRIat UN<br> V V VΩmA<br>69.006 4.8 6.6 28 214<br>129.012 9.6 13.2 110 109<br>249.024 19.2 26.4 445 54<br>489.048 38.4 52.8 1,770 27<br>609.060 48 66 2,760 21.7<br>1109.110 88 121 9,420 11.7<br>1259.125 100 138 12,000 10.4<br>2209.220 176 242 37,300 5.8<br>DC version data<br>|Nominal Coil Operating range Resistance Rated coil<br>voltage codeconsumption<br>UNUminUmaxRIat UN<br> V V VΩmA<br>69.006 4.8 6.6 28 214<br>129.012 9.6 13.2 110 109<br>249.024 19.2 26.4 445 54<br>489.048 38.4 52.8 1,770 27<br>609.060 48 66 2,760 21.7<br>1109.110 88 121 9,420 11.7<br>1259.125 100 138 12,000 10.4<br>2209.220 176 242 37,300 5.8<br>DC version data<br>|Nominal Coil Operating range Resistance Rated coil<br>voltage codeconsumption<br>UNUminUmaxRIat UN<br> V V VΩmA<br>69.006 4.8 6.6 28 214<br>129.012 9.6 13.2 110 109<br>249.024 19.2 26.4 445 54<br>489.048 38.4 52.8 1,770 27<br>609.060 48 66 2,760 21.7<br>1109.110 88 121 9,420 11.7<br>1259.125 100 138 12,000 10.4<br>2209.220 176 242 37,300 5.8<br>DC version data<br>|AC version data|AC version data|AC version data|AC version data|AC version data|AC version data| |---|---|---|---|---|---|---|---|---|---|---|---|---| ||Nominal<br>voltage<br>UN|Coil<br>code<br>|Operating range<br> <br>UminUmax||Resistance<br> <br>R|Rated coil<br> consumption<br> Iat UN|Nominal<br>voltage<br>UN|Coil<br>code<br>|Operating range<br> <br>UminUmax||Resistance<br> <br>R|Rated coil<br> consumption<br> Iat UN(50Hz)| ||V||V|V|Ω|mA|V||V|V|Ω|mA| ||6|9.006|4.8|6.6|28|214|6|8.006|4.8|6.6|4.6|367| ||12|9.012|9.6|13.2|110|109|12|8.012|9.6|13.2|19|183| ||24|9.024|19.2|26.4|445|54|24|8.024|19.2|26.4|74|90| ||48|9.048|38.4|52.8|1,770|27|48|8.048|38.4|52.8|290|47| ||60|9.060|48|66|2,760|21.7|60|8.060|48|66|450|37| ||110|9.110|88|121|9,420|11.7|110|8.110|88|121|1,600|20| ||125|9.125|100|138|12,000|10.4|120|8.120|96|132|1,940|18.6| ||220|9.220|176|242|37,300|5.8|230|8.230|184|253|7,250|10.5| ||||||||240|8.240|192|264|8,500|9.2| ||||||||400|8.400|320|440|19,800|6| AC (NO/nPST-NO) version data - ≥ 3 mm ## DC (NO/nPST-NO) version data - ≥ 3 mm Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN V V V Ω mA 6 9.006 5.1 6.6 12 500 12 9.012 10.2 13.2 48 250 24 9.024 20.4 26.4 192 125 48 9.048 40.8 52.8 770 63 60 9.060 51 66 1,200 50 110 9.110 93.5 121 4,200 26 125 9.125 106 138 5,200 24 220 9.220 187 242 17,600 12.5 Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN (50Hz) V V V Ω mA 6 8.006 5.1 6.6 4 540 12 8.012 10.2 13.2 14 275 24 8.024 20.4 26.4 62 130 48 8.048 40.8 52.8 220 70 60 8.060 51 66 348 55 110 8.110 93.5 121 1,200 30 120 8.120 106 137 1,350 24 230 8.230 196 253 5,000 14 240 8.240 204 264 6,300 12.5 400 8.400 340 440 14,700 7.8 DC (NO/nPST-NO) magnetic blow version - > 2.1 mm or > 4.2 mm Nominal Coil Operating range Resistance Rated coil voltage code consumption UN Umin Umax R I at UN V V V Ω mA 6 9.006 5.1 6.6 28 214 12 9.012 10.2 13.2 110 109 24 9.024 20.4 26.4 445 54 48 9.048 40.8 52.8 1,770 27 60 9.060 51 66 2,760 21.7 110 9.110 93.5 121 9,420 11.7 125 9.125 106 138 12,000 10.4 220 9.220 154* 242 37,300 5.8 * Special version with Umin = 70 % UN 8 62 SERIES 62 Series - Power relays 16 A A ## Coil specifications R 62 - DC coil operating range v ambient temperature Changeover contacts R 62 - AC coil operating range v ambient temperature Changeover contacts **==> picture [511 x 142] intentionally omitted <==** **==> picture [110 x 9] intentionally omitted <==** **----- Start of picture text -----**<br> 1 - Max. permitted coil voltage.<br>**----- End of picture text -----**<br> 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. **==> picture [200 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> 2 - Min. pick-up voltage with coil at ambient temperature.<br>**----- End of picture text -----**<br> R 62 - DC coil operating range v ambient temperature Normally open contacts R 62 - AC coil operating range v ambient temperature Normally open contacts **==> picture [511 x 142] intentionally omitted <==** 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. - 2 - Min. pick-up voltage with coil at ambient temperature. R 62 - DC coil operating range v ambient temperature Normally open contacts - magnetic blow version **==> picture [251 x 142] intentionally omitted <==** 1 - Max. permitted coil voltage. - 2 - Min. pick-up voltage with coil at ambient temperature. 9 62 SERIE S 62 Series - Power relays 16 A ## Outline drawings Type 62.22 Type 62.23 Type 62.2x Type 62.2x-0300 A 62.22-0300 62.23-0300 Type 62.32 Type 62.33 Type 62.3x Type 62.3x-0300 62.32-0300 62.33-0300 Type 62.82 Type 62.83 Type 62.8x Type 62.8x-0300 62.82-0300 62.83-0300 Type 62.31-4800 Type 62.32-4800 10 62 SERIES 62 Series - Power relays 16 A A Accessories **==> picture [55 x 211] intentionally omitted <==** **----- Start of picture text -----**<br> 062.10<br>“sia c 4<br>=|<br>062.10 with relay<br>062.60<br>N<br>st<br>062.60 with relay<br>**----- End of picture text -----**<br> Mounting adaptor for types 62.3x and 62.8x.xxxx.xxx9 (M4) 062.10 © ~~47.2~~ x ~~a~~ = ~~N~~ X A ~~\* 6) —— 305 te_]~~ 22.2 ~~)~~ Seso ~~=|~~ © "are ~~M4~~ 062.10 062.10 with relay Flange mounting adaptor for types 62.3x and 62.8x.xxxx.xxx9 062.60 **==> picture [447 x 450] intentionally omitted <==** **----- Start of picture text -----**<br> 062.60 062.60 with relay<br>Top flange mount for types 62.3x and 62.8x.xxxx.xxx9 062.05<br>40.6<br>28 3 46.1 17 51.3<br>062.05 -<br>: y 3.6 45.6<br>062.05 with relay 062.05 062.05 with relay<br>o— : Top 35 mm rail (EN 60715) mount for types 62.3x and 62.8x.xxxx.xxx9 062.07 |<br>* ss ] | 8 eg<br>062.07<br>+ 0 6 2.07 |<br>|<br>® 4.1<br>*. 3 46.1 inn<br>062.07 with relay 062.07 062.07 with relay<br>Rear 35 mm rail (EN 60715) mount for types 62.3x and 62.8x.xxxx.xxx9 062.08<br>| fp<br>062.08<br>i Sy tt |_0s_|<br>062.08 with relay 062.08 062.08 with relay<br>Sheet of marker tags for 62 series relays, plastic, 72 tags, 6x12 mm 060.72<br>— |<br>**----- End of picture text -----**<br> 060.72 11 62 SERIE S 92 Series - Sockets and accessories for 62 series relays **==> picture [10 x 13] intentionally omitted <==** **----- Start of picture text -----**<br> A<br>**----- End of picture text -----**<br> |Screw terminal (Box clamp) socket <br>panel or 35 mm rail (EN 60715) mount<br>For relay type 62.31, 62.32, 62.33<br>Accessories<br>Metal retainingclip (supplied with socket -packagingcode SMA)<br>Identification tag092.00.2<br>Modules(see table below)99.02<br>Timer modules (see table below) 86.00, 86.30<br>Technical data<br>Rated values 16 A - 250 V<br>Dielectric strength 6 kV<br>Protection categoryIP 20<br>Ambient temperature °C –40…+70<br>Screw torque Nm 0.8<br>Wire striplength mm<br>Max. wire size for 92.03 socket solid wire stranded wire<br>mm<br>2<br>AWG 1x8<br>~~©~~|92.03 92.03.0<br>panel or 35 mm rail (EN 60715) mountBlue Black<br>For relay type 62.31, 62.32, 62.33<br>)092.71|92.03 92.03.0<br>panel or 35 mm rail (EN 60715) mountBlue Black<br>For relay type 62.31, 62.32, 62.33<br>)092.71| |---|---|---| ||092.00.2|| ||99.02|| ||Timer modules (see table below) 86.00, 86.30<br>Rated values 16 A - 250 V|| ||th 6 kV(1.2/50μs)between coil and contacts|| ||IP 20|| ||erature °C –40…+70(see diagram L92)<br>ue Nm 0.8|| ||ue Nm 0.8<br>th mm 10|| ||Max. wire size for 92.03 socket solid wire stranded wire|Max. wire size for 92.03 socket solid wire stranded wire| ||21x10/2x4 1x6|2x4 1x6/2x4| ||AWG 1x8/2x12 1x10|2x12 1x10/2x12| ## L 92 - Rated current vs ambient temperature **==> picture [8 x 52] intentionally omitted <==** **----- Start of picture text -----**<br> Rated current (A)<br>**----- End of picture text -----**<br> ## 86 series timer modules **==> picture [20 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> 86.00<br>**----- End of picture text -----**<br> |86 series timer modules|| |---|---| |Multi-voltage: (12…240)V AC/DC;<br>Multi-functions: AI,DI,SW,BE,CE,DE,EE,FE; (0.05s…100h)86.00.0.240.0000<br>(12…24)V AC/DC;Bi-function: AI,DI; (0.05s…100h)86.30.0.024.0000<br>(110...125)V AC;Bi-function: AI,DI; (0.05s…100h)86.30.8.120.0000<br>(230...240)V AC;Bi-function: AI,DI; (0.05s…100h)86.30.8.240.0000|86.00.0.240.0000| ||86.30.0.024.0000| ||86.30.8.120.0000| ||86.30.8.240.0000| **==> picture [20 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> 86.30<br>**----- End of picture text -----**<br> ## 99.02 coil indication and EMC suppression modules for 92.03 socket 99.02 Approvals (according to type): DC Modules with non-standard polarity (+A2) on request. |99.02 coil indication and EMC suppression modules for 92.03 socketfor 92.03 socket|| |---|---| |Diode(+A1,standardpolarity) (6...220)V DC 99.02.3.000.00<br>LED(6...24)V DC<br>LED(28...60)V DC<br>LED(110...240)V DC<br>LED + Diode(+A1,standardpolarity) (6...24)V DC 99.02.9.024.99<br>LED + Diode(+A1,standardpolarity) (28...60)V DC 99.02.9.060.99<br>LED + Diode(+A1,standardpolarity) (110...220)V DC 99.02.9.220.99<br>LED + Varistor(6...24)V DC<br>LED + Varistor(28...60)V DC<br>LED + Varistor(110...240)V DC<br>RC circuit(6...24)V DC<br>RC circuit(28...60)V DC<br>RC circuit(110...240)V DC<br>Residual current by-pass (110...240)V AC 99.02.8.230.07|V DC 99.02.3.000.00| ||V DC/AC 99.02.0.024.59| ||V DC/AC 99.02.0.060.59| ||V DC/AC 99.02.0.230.59| ||V DC 99.02.9.024.99| ||V DC 99.02.9.060.99| ||V DC 99.02.9.220.99| ||V DC/AC 99.02.0.024.98| ||V DC/AC 99.02.0.060.98| ||V DC/AC 99.02.0.230.98| ||V DC/AC 99.02.0.024.09| ||V DC/AC 99.02.0.060.09| ||V DC/AC 99.02.0.230.09| ||Residual current by-pass (110...240)V AC 99.02.8.230.07| 12 62 SERIES 92 Series - Sockets and accessories for 62 series relays PCB socket 92.13 (blue) 92.13.0 (black) For relay type 62.31, 62.32, 62.33 Accessories <— 92.13 Metal retaining clip (supplied with socket - packaging code SMA) 092.54 Approvals Technical data (according to type): Rated values 10 A - 250 V Dielectric strength 2.5 kV AC G HI & ~~® OC~~ Ambient temperature °C –40…+70 cANs ~~San ann~~ A 62.3x plug on 92.13 is 63.3 mm high 92.33 Approvals (according to type): Panel mount solder socket mounted with M3 screw 92.33 (blue) For relay type 62.31, 62.32, 62.33 Accessories Metal retaining clip (supplied with socket - packaging code SMA) 092.54 Technical data Rated values 10 A - 250 V Dielectric strength 2.5 kV AC Ambient temperature °C –40…+70 ## Packaging code How to code and identify retaining clip and packaging options for sockets. Example: 9 2 . 0 3 S M A A Standard packaging ~~Te~~ Cn SM Metal retaining clip a 9 2 . 0 3 Without retaining clip 13
Updated at June 6, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →