ZX-GTC41

**Smart Sensor (Wide Laser Beam CCD Measurement Sensor) ZX-GT** 

CSM_ZX-GT_DS_E_1_2 

## **Achieves Micron Accuracy with Longest-in-Class Sensing Distance** 

- Maximum sensing distance of 500 mm and measuring width of 28 mm provide a wide area. 

- 10- μ m accuracy anywhere within the area, even though the sensor uses a non-contact method. 

- Stable detection of even transparent glass and mirror surfaces. 

- Compact sensor and controller provide minimal installation space requirements. **Refer to** _**Safety Precautions**_ **on page 8.** 

- ~~a~~ 

For the most recent information on models that have been certified for SS safety standards, refer to your OMRON website. 

## **Features** 

## **Maximum 500-mm area** 

## **Measurable at any position** 

Measurements can be consistently taken within a wide area, whatever stage the work is at or whichever way it is inserted. It can now be set to positions without interference from the work feed and without limitations of size of work area. 

**Maximum 500-mm area** 

## Ld **Accurate! 10-** μ **m by non-contact method** 

ZX-GT is the only sensor with the ability to measure and locate position to an accuracy of 10 μm without contact. Unlike conventional through-beam laser sensors, the ZX-GT’s unique algorithm has the flexibility to meet a wide variety of applications, including the ability to accurately measure glass and mirror surfaces. 

## - **Small! Compact like palm-top** 

Compact sensor head that can be set in the gap between equipment. 

**==> picture [111 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Its compact controller is a continuation<br>of the ZX series.<br>**----- End of picture text -----**<br>


## Ld **New concept “TRIO”** 

## **1/7 in speed compared with conventional products** 

With OMRONS unique TRIO (Triple parallel processing) algorithm, it is possible to take 2000 high-speed samples per second, 7 times greater than previously possible, greatly reducing tact time. 

**==> picture [201 x 44] intentionally omitted <==**

**----- Start of picture text -----**<br>
Previous<br>3.3 ms<br>product<br>ZX-GT 0.5 ms<br>**----- End of picture text -----**<br>


**1/7 of the previous speed** 

**1** 

**ZX-GT** 

## **Ordering Information** 

**Sensors Sensor Head (Dimensions** ➜ **page 8) Appearance sOptical ystem Measuringwidth distanceSensing Resolution Output type Model** Emitter and receiver, separate type NPN **ZX-GT28S11** 0 to 500 mm PNP **ZX-GT28S41** Emitter and receiver, integrated type Through-beam 28 mm 10 μm NPN **ZX-GT2840S11** 40 mm PNP **ZX-GT2840S41** ga ~~a=~~ **Controller (Dimensions** ➜ **page 8) Appearance Power supply Output type Model** NPN **ZX-GTC11** DC PNP **ZX-GTC41** ~~ae~~ **Accessories (Order Separately) These are not included with the sensor and controller, so order these accessories separately if necessary. Set: Interface Unit (RS-232C/Binary output) and PC Setup Software Output configuration Model** NPN **ZX-GIF11A** PNP **ZX-GIF41A** ~~os~~ **Interface Unit (RS-232C/Binary output) (Dimensions** ➜ **page 8) Appearance Power supply Output type Model** NPN **ZX-GIF11** DC PNP **ZX-GIF41** ~~eo~~ **Setup software PCs Name Model** Smart Monitor GT **ZX-GSW11 Calculating Units (Dimensions** ➜ **page 8) Appearance Model ZX-CAL2** ~~pf~~ **Receiver-Controller Extension Cable (Dimensions** ➜ **page 8) Model Cable length Quantity Standard cable Flexible cable** 1 m **ZX-XGC1A ZX-XGC1R** 2 m **ZX-XGC2A ZX-XGC2R** 5 m **ZX-XGC5A ZX-XGC5R** 1 8 m **ZX-XGC8A ZX-XGC8R** 20 m **ZX-XGC20A ZX-XGC20R** ~~===~~ **Note:** Up to two extension cables can be connected. However, be sure to limit the total extension cable length between the receiver and the Controller to 30 meters (including the receiver cable). 

**2** 

**ZX-GT** 

## **Leading Technology and CCD Processing Algorithm That Support Stable Measurements** 

## **Thoroughly eliminating the effect of the ambient temperature** 

> It is important to eliminate the influence of temperature to ensure the **Fluctuation in measurement values** accuracy of a measurement. However, the temperature in the field environment changes according to the time and the season. With the ZX-GT, which employs CCD method, the influence on the resolution from temperature changes is greatly reduced leading to an error rate as **PD method (legacy method)** low as 0.01% (2.8 micro-meters *). * This is a representative case. Please see the specifications table for the details of the relevant conditions. **CCD method Consistent measurement achieved even with variation in temperature** Hot Cold 

**Transparent object detection possible Integrated MRC filter** 

The detection of edges has been a problem for transparent objects with traditional transmission type sensors. However, ZX-GT adopts OMRON’s 

unique MRC filter * (Mirror Reflection Cut Filter) and CCD methodology. It can accurately detect work that reflects light such as mirror-finished surface or work that allows light to pass through such as glass (including coated glass). 

* MRC Filter: OMRON’s proprietary optical filter. 

## Even effective with mirror finished surfaces 

**==> picture [484 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
Glass Edge<br>CCD<br>3<br>Glass-edge  CCD elements detects a slight shadow created<br>measurement when a laser light hits the edge of the glass to<br>determine the position of the edge.<br>**----- End of picture text -----**<br>


## **Collimate optical technology** 

## **Super parallel-beam** 

With OMRON’s unique collimate optical technology *, the closest to ideal parallel beam is created. Errors are controlled in the measurement area and the longest and most accurate measurement is achieved. 

## **Sub-pixel processing** 

## **CCD processing algorithm** 

CCD detects the shadow made from measurement objects and by performing sub-pixel calculation, it achieves 10 micrometer level accuracy. 

**==> picture [39 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Collimator lens<br>**----- End of picture text -----**<br>


**==> picture [16 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mirror<br>**----- End of picture text -----**<br>


* Collimate optical technology Laser Collimate optical technology allows laser lights to stay parallel using mirror reflection and lens refraction effects, to take advantage of the laser light’s high-level of directivity. 

**==> picture [159 x 25] intentionally omitted <==**

**----- Start of picture text -----**<br>
Measurement<br>accuracy  CCD pixel pitch<br>is within<br>10 micrometers<br>**----- End of picture text -----**<br>


**3** 

**ZX-GT** 

## **New Concept** 

## **“Smart Recipe”** 

Using the PC software 'Smart-monitor GT', set up is easy with simply clicking the icons. This is OMRON’s Smart Recipe methodology. 

**==> picture [155 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
Interface Unit Controller<br>By connecting it to the controller,<br>RS-232C communication and<br>binary output is possible.<br>**----- End of picture text -----**<br>


**==> picture [142 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
FO Easy to set-up<br>Different features are organized by<br>tabs, to allow the user to understand<br>and change the settings easily.<br>Measurement conditions can be saved<br>on PCs.<br>**----- End of picture text -----**<br>


## **Advanced support for data collection and analysis** 

The measurement data is gathered in the PCs in real time so it is easy to ascertain and analyse the current conditions at any time. 

## ● **Grasp the data trend and prevent defective parts** 

● **Measurement result can be logged at appropriate times** 

Time 

The trend of the measurement data and sudden change can be checked in the time-dependent graph, so that the appropriate action can be taken before defective goods are produced. 

The logged data can be sent to Excel . It is useful for traceability management and for preparing quality assurance reports. 

**4** 

**ZX-GT** 

## **Easy to use, even from a distance** 

## [Lo **First in the industry 3-way optical axis adjustment** 

Three optical axis adjustment functions are integrated for the industry’s longest measurement. This function provides the optimal adjustment when the sensor head is installed on-site. 

**==> picture [377 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
With the sensor-head With the controller With the PC<br>[ [| [<br>**----- End of picture text -----**<br>


LED on the light-receiving device is lit The CCD light reception balance is The direction of the sensor head’s up to indicate when the light axis is displayed in the upper display and the adjustment is graphically displayed. matched. amount of light received can be The adjustment conditions can be confirmed with numerical values confirmed through the shapes of the underneath. light reception waveforms. 

## [Lo **Longest in the industry** 

## **30-m cable extension** 

The emitter and receiver do not need to be connected with each other. Each cable can be extended up to 30 m. It is perfectly suited for installation into large-scale production line. 

**==> picture [313 x 144] intentionally omitted <==**

**----- Start of picture text -----**<br>
30 m<br>[Ee<br>to 24 VDC<br>maximum length 30 m<br>Receiver (using the special extension cables) Controller<br>Emitter<br>maximum length 30 m<br>to 24 VDC<br>**----- End of picture text -----**<br>


**5** omrRONn ~~a~~ 

**ZX-GT** 

## **Ratings and Specifications** 

## **Sensor Head** 

|**Item**<br>**Model**|**ZX-GT28S11**|**ZX-GT2840S11**|**ZX-GT28S41**|**ZX-GT2840S41**|
|---|---|---|---|---|
|**Output type**|NPN||PNP||
|**Appearance**|Separate type|Integrated type|Separate type|Integrated type|
|**Light source**|Visible semiconductor laser diode (wavelength 650 nm, CLASS 1 of EN60825-1/IEC60825-1, CLASS II of FDA<br>(21CFR 1040.10 and 1040.11)||||
|**Measuring width**|28 mm||||
|**Sensing distance**|0 to 500 mm|40 mm|0 to 500 mm|40 mm|
|**Minimum sensing object**|0.5 mm dia.*1|0.2 mm dia.|0.5 mm dia.*1|0.2 mm dia.|
|**Linearity**|±0.1%F.S.*2||||
|**Resolution**|10μm (number of process values to average: 16)*3||||
|**Temperature**<br>**characteristic**|0.01%F.S/°C*4||||
|**Indicators (emitter)**|Laser ON indicator (green), laser alarm indicator (red)||||
|**Indicators (receiver)**|Optical axis setting indicator (green)||||
|**Laser OFF input/sync input**|ON: Short-circuited with 0 V or 1.5 V max.<br>OFF: Open (leakage current: 0.1 mA max.)||ON: Short-circuited with power supply voltage or power<br>supply voltage−1.5 V max.<br>OFF: Open(leakage current: 0.1 mA max.)||
|**Laser deterioration alarm**<br>**output**|NPN open-collector output<br>30 VDC 20 mA max.<br>Residual voltage 1.2 V max.||PNP open-collector output<br>30 VDC 20 mA max.<br>Residual voltage 2 V max.||
|**Power consumption**<br>**(emitter)**|30 mA max.||||
|**Power supply voltage**<br>**(emitter)**|24 VDC +10%,−15% ripple (p-p) 10% max.||||
|**Dielectric strength**|1,000 VAC, 50/60 Hz for 1 min||||
|**Insulation resistance**|20 MΩ(at 500 VDC)||||
|**Operating ambient**<br>**illumination(emitter)**|3,000 lx (incandescent light)||||
|**Operating ambient**<br>**illumination(receiver)**|1,000 lx (incandescent light)*5||||
|**Ambient temperature**|Operating: 0 to 40°C Storage:−15 to 50°C (with no icing or condensation)||||
|**Ambient humidity**|Operating and storage: 35% to 85% (with no condensation)||||
|**Vibration resistance**<br>**(durability)**|10 to 150 Hz Single-amplitude: 0.75 mm for 80 min each in X, Y and Z directions||||
|**Shock resistance**<br>**(durability)**|300 m/s23 times each in six directions (up/down, left/right, forward/backward)||||
|**Degree of protection**|IEC60529  IP40||||
|**Cable length**|2 m||||
|**Material**|Case: aluminum die-cast, Lens: glass||||
|**Weight (packed state)**|Approx. 550 g|Approx. 570 g|Approx. 550 g|Approx. 570 g|
|**Accessories**|Laser warning labels, Instruction Sheet||||



F.S.: 28 mm measuring range of receiver 

- *1. Distance between emitter and receiver: 500 mm, measurement object at 250 mm from receiver. Glass ends of chamfer 0.1 mm or more can be detected in glass edge measurement mode. (at binary level 70%) 

*2. Linearity is given to be a typical error with respect to an ideal straight line when the distance between the emitter and receiver is 100 mm and light is blocked at a distance of 50 mm from the receiver. 

(On the ZX-GT2840@@, the measurement object is measured at a distance of 20 mm from the receiver.) 

- *3. The amount of fluctuation (±3σ) in the analog output when the distance between the emitter and receiver is 100 mm and a ZX-GTC@@ is connected 

- *4. Change in the light cutoff value on one side when the distance between the emitter and receiver is 100 mm and the light is half-cutoff at a distance of 50 mm from the receiver 

   - (On the ZX-GT2840@@, the measurement object is measured at a distance of 20 mm from the receiver.) 

- *5. Standard mode (NORM) used 

**6** 

**ZX-GT** 

## **Controller** 

|**Item**<br>**Model**|**Item**<br>**Model**|**ZX-GTC11**|**ZX-GTC41**|
|---|---|---|---|
|**Output type**||NPN|PNP|
|**Measurement cycle*1**||1.5 ms(standard mode(NORM))0.5 ms(high-speed mode(FAST)) *2||
|**Samples to average**||1/2/4/8/16/32/64/128/256/512/1,024/2,048/4,096||
|**Analog output*3**||For current output: 4 to 20 mA/F.S., max. load resistance 300ΩFor voltage output:±4 V, (±5 V, 1 to 5 V*4),<br>output impedance 100Ω||
|**Timing input, bank switching**<br>**input, zero reset input, reset**<br>**input**||ON: short-circuited with 0 V or 1.5 V max.<br>OFF: Open (leakage current: 0.1 mA max.)|ON: short-circuited with power supply voltage or power<br>supply voltage−1.5 V max.<br>OFF: Open(leakage current: 0.1 mA max.)|
|**HIGH/PASS/LOW**<br>**Judgment output*5**<br>**Sync output*6**||NPN open-collector output<br>30 VDC 50 mA max.<br>Residual voltage 1.2 V max.|PNP open-collector output<br>30 VDC 50 mA max.<br>Residual voltage 2 V max.|
|**Indicator**||Judgment output indicator: HIGH (orange), PASS (green), LOW (orange)<br>Main display (red)Sub-display (yellow)Bank 1/2(orange),zero reset(green)||
|**Main**<br>**functions**|**Number of registered**<br>**setups**|2 banks||
||**Measurement Mode**|Interrupted beam width measurement, incident beam width measurement, outer diameter measurement, center position measurement,<br>IC leadpitch,IC lead widthjudgment,specified edge measurement,wireposition measurement, glass edgeposition measurement||
||**Display during**<br>**measurement**|Measured value, resolution, threshold, voltage output value, current output value (number of display digits can<br>be changed)||
||**Zero reset functions**|Offset settingof zero reset value,zero reset value memory||
||**Hold**|Sample hold, peak hold,bottom hold, peak-to-peak hold,average hold,delayhold||
||**Timer functions**|ON delay,OFF delay,one-shot||
||**Adjustment functions**|Optical Axis adjust mode/light intensityt writingmode,variable binarylevel,variable edge filter,analogoutput scaling||
||**Calculation**|2 Possible on up to two Controllers (Calculation Unit ZX-CAL2 is required for connecting Controllers to each<br>other.)A-B,A+B,width||
||**Other**|Measurement cycle setting,threshold setting,hysteresis setting,initialization,keylock||
|**Temperature characteristic**||0.005%F.S./°C||
|**Current consumption**||150 mA max. withpower supplyvoltage of 24 VDC(includingreceiver) *****7||
|**Power supply voltage**||24 VDC +10%, −15% ripple(p-p)10% max.||
|**Dielectric strength**||1,000 VAC,50/60 Hz for 1 min||
|**Insulation resistance**||20 MΩ (at 500 VDC)||
|**Ambient temperature**||Operating: 0 to 50°C Storage:−15 to 60°C(with no icingor condensation)||
|**Ambient humidity**||Operatingand storage: 35% to 85%(with no condensation)||
|**Vibration resistance(durability)**||10 to 150 Hz Single-amplitude: 0.35 mm for 80 min each in X,Y and Z directions||
|**Shock resistance(durability)**||300 m/s23 times each in six directions(up/down,left/right,forward/backward)||
|**Degree ofprotection**||IEC60529  IP20||
|**Cable length**||2 m||
|**Material**||Case: PBT(polybutylene terephthalate),Cover: Polycarbonate||
|**Weight(packed state)**||Approx. 330g||
|**Accessories**||Instruction Sheet||



*1. A simple average is used in IC lead pitch judgment mode or IC lead width judgment mode. The measurement cycle time can be calculated as follows: Specified measurement cycle time × (Number of samples to average + 1) + 1 ms max. In other measurement modes, a moving average is used. The first measurement cycle time can be calculated as follows: Specified measurement cycle time × (Number of samples to average + 1) + 1 ms max. The second and later measurement cycle times will be equal to the specified measurement cycle time. 

*2. The response time in the high-speed mode (FAST) for the IC lead pitch and IC lead width judgment modes is 1 ms. 

*3. Current/voltage can be switched using the switch provided on the rear of the Controller. *4. Can be set by the analog output scaling function. 

*5. The error (ERR) state is displayed when all HIGH/PASS/LOW outputs turn OFF. 

*6. Normally, wire the sync output wire directly to the emitter’s sync input wire and run the Controller in the standard mode. On an NPN type Controller, use an NPN type emitter, and on a PNP type Controller, use a PNP type emitter. Wiring of the sync wires is not required when the Controller is run in the high-speed mode. (Note, however, that the Controller becomes more susceptible to the influence of ambient light in this case.) 

*7. The value is 175 mA max. (including receiver) when current output is set. 

## **Interface Unit** 

|**Item**<br>**Model**|**ZX-GIF11/-GIF11A**|**ZX-GIF41/-GIF41A**|
|---|---|---|
|**Compatible Controller**|ZX-GTC11|ZX-GTC41|
|**Indicator**|Power ON (green), Controller communications (orange), Controller communications error (red), RS-232C<br>communications(orange),RS-232C communications error(red),binaryoutput(orange)||
|**Communicationsport**|RS-232C(9-pin D-sub connector)||
|**12-bit binary output**<br>**(D11 to D0, GATE)**|NPN open-collector output<br>30 VDC 20mA max.<br>Residual voltage 1.2 V max.|PNP open-collector output<br>30 VDC 20 mA max.<br>Residual voltage 2 V max.|
|**Power supply voltage**|Supplied from Controller(power consumption: 60 mA max.)||
|**Dielectric strength**|1,000 VAC,50/60 Hz for 1 min||
|**Insulation resistance**|20 MΩ (at 500 VDC)||
|**Ambient temperature**|Operating: 0 to 50°C Storage:−15 to 60°C(with no icingor condensation)||
|**Ambient humidity**|Operatingand storage: 35% to 85%(with no condensation)||
|**Vibration resistance(durability)**|10 to 150 Hz Single-amplitude: 0.35 mm for 80 min each in X,Y and Z directions||
|**Shock resistance(durability)**|300 m/s23 times each in six directions(up/down,left/right,forward/backward)||
|**Degree ofprotection**|IEC60529  IP20||
|**Cable length**|RS-232C 0.5 m,binaryoutput 2 m||
|**Materials**|Case: PBT(polybutylene terephthalate),Cover: Polycarbonate||
|**Weight (packed state)**|ZX-GIF@1A: Approx. 550 g<br>ZX-GIF@1: Approx. 330g||
|**Accessories**|ZX-GIF@1A: Setup Software (CD-ROM), 2 clamps, Instruction Sheet<br>ZX-GIF@1: 2 clamps,Instruction Sheet||



**7** 

**ZX-GT** 

## **Safety Precautions** 

## **Refer to the** _**Technical Guide**_ **.** 

## **WARNING** 

**This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes.** 

## **CAUTION** 

**Never look into the laser beam. Doing so continuously will result in visual impairment.** 

**Do not attempt to dismantle, pressurize, or incinerate the product. Doing so may cause the laser beam to leak, resulting in the danger of visual impairment.** 

For details on information such as the usage precautions ➜ refer to the _**ZX-GT Series Smart Sensor User's Manual**_ (Cat. No.: Z263). 

## **Dimensions** 

**(Unit: mm)** 

**Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.** 

## **Sensor Head** 

## **Separate type: ZX-GT28S11/-GT28S41** 

## **Integrated type: ZX-GT2840S11/-GT2840S41** 

**==> picture [511 x 486] intentionally omitted <==**

**----- Start of picture text -----**<br>
Laser ON indicator (green) Two, 3.2-dia. holes<br>Laser alarm indicator (red) Optical axis setting indicator (green) Laser ON indicator (green) Optical axis   Five, 6.5 dia. countersunk holes, depth 5<br>54.1 Laser alarm indicator (red) Optical axis setting indicator (green)<br>31 31 16.9 dia. 54.1<br>13.3 31 31<br>15.5 8.5 5 17.8 6Optical 7.15 8.1 Connector 6 13.3 16.9 dia.<br>5 mm dia. (7/0.18 mm dia.) 4-core, standard length 2 mRound vinyl insulated cable1.7 5 Emitter24 55 ± 0.15 axisBeamReceiver 28 2.5 Round vinyl insulated cable6.2 mm dia. (7/0.127 mm dia.)15-core, standard length 2 m1.7 Round vinyl insulated cable15.5 8.5 5 17.8 20 34 ± 0.1 103 7.15 8.1 Connector<br>5 mm dia. (7/0.18 mm dia.) Round vinyl insulated cable<br>49 ± 0.15 4-core, standard length 2 m 6.2 mm dia. (7/0.127 mm dia.)<br>57.5 16 42.5 32.6 28 16 35 57.5 1.7 5 55 Beam40 28 2.5 15-core, standard length 2 m1.7<br>3818.6 ± 0.15 4 .5 9 15 ± 0.15 16 Optical axis<br>Optical axis 13 28<br>Three, 4.5-dia. holes Two, 4.5-dia. holes 57.5 42.5 32.9 4 16 35 57.5<br>38 ± 0.15 7 3 21 ± 0.15 18.9<br>0.3 Emitter 11 Receiver<br>11 ± 0.15<br>9.7 9.7 Mounting hole dimensions2-M3<br>4-M4, depth 4 4-M4, depth 4<br>20<br>Controller Interface Unit<br>ZX-GTC11/-GTC41 ZX-GIF11/-GIF41<br>4.3<br>11.7 30 33.1 11.7 30<br>11.7<br>11.7<br>Connector 29 2.2Voltage/Current switch Connector 12.25 3 5 6.55<br>4.2 64.3 4.2 4.2 64.3 4.2<br>3 3<br>136 336<br>51.5 46<br>16.9 dia. 16.8 31.5 15 31.5<br>6<br>13.2 13 15.8 13.2 13<br>36.8 36.8<br>Round vinyl insulated cable Round vinyl insulated cable Round vinyl insulated cable Round vinyl insulated cable<br>6.2 mm dia. (7/0.127 mm dia.) 15-core 5.2 mm dia. (19/0.08 mm dia.) 13-core 5.2 mm dia. (19/0.08 mm dia.) 10-core 5.4 mm dia. (19/0.08 mm dia.) 15-core<br>standard length 0.1 m standard length 2 m standard length 0.3 m standard length 2 m<br>Calculating Unit Operation  Receiver-Controller Extension Cable<br>ZX-CAL2 1 9.524.9 indicators Connectors ZX-XGC @ A/-XGC @ R<br>3 54.1 L1 *1*11 51.5<br>57<br>15.1 54.9<br>12 44.05<br>8 9.5 16.9 dia. 16.9 dia.<br>30 26 15 15-pole connector (male) Round vinyl insulated cable, 15-core *215-core *2*22 15-pole connector (female)<br>14.4<br>*1. ZX-XGC1A/R : 1M ZX-XGC1A/R : 1M *2. Standard cable : 6.2 dia. Standard cable : 6.2 dia.<br>3.4 5 36.7 ZX-XGC2A/R : 2M Flexible cable : 6.1 dia.<br>**----- End of picture text -----**<br>


**==> picture [233 x 267] intentionally omitted <==**

**----- Start of picture text -----**<br>
33.1 11.7 30<br>11.7<br>3 5 6.55<br>Connector 12.25<br>4.2 4.2<br>64.3<br>3<br>336<br>46<br>15 31.5<br>13.2 13<br>36.8<br>Round vinyl insulated cable Round vinyl insulated cable<br>5.2 mm dia. (19/0.08 mm dia.) 10-core 5.4 mm dia. (19/0.08 mm dia.) 15-core<br>standard length 0.3 m standard length 2 m<br>Receiver-Controller Extension Cable<br>@ A/-XGC @ R<br>54.1 L1 *1*11 51.5<br>16.9 dia. 16.9 dia.<br>15-pole connector (male) 15-pole connector (female)<br>Round vinyl insulated cable, 15-core *215-core *2*22<br>*1. ZX-XGC1A/R : 1M ZX-XGC1A/R : 1M *2. Standard cable : 6.2 dia. Standard cable : 6.2 dia.<br>ZX-XGC2A/R : 2M Flexible cable : 6.1 dia.<br>ZX-XGC5A/R : 5M<br>ZX-XGC8A/R : 8M<br>ZX-XGC20A/R : 20M<br>**----- End of picture text -----**<br>


**8** 

## Terms and Conditions Agreement 

## Read and understand this catalog. 

Please read and understand this catalog before purchasing the products.  Please consult your OMRON representative if you have any questions or comments. 

## Warranties. 

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. 

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE 

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. 

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 

See http://www.omron.com/global/ or contact your Omron representative for published information. 

## Limitation on Liability; Etc. 

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 

## Suitability of Use. 

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. 

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 

## Programmable Products. 

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. 

## Performance Data. 

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. 

## Change in Specifications. 

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. 

## Errors and Omissions. 

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 

**In the interest of product improvement, specifications are subject to change without notice.** 

## **OMRON Corporation** 

## **Industrial Automation Company** 

2016.6 

**http://www.ia.omron.com/** 

(c)Copyright OMRON Corporation 2016 All Right Reserved.