XUM2APXBM8

Product data sheet Characteristics 

## XUM2APXBM8 

Photoelectric sensors XU, miniature, thru beam, Smax=30 m, system, PNP, connector M8 

## Main 

|Main||
|---|---|
|Range of product|Telemecanique Photoelectric sensors XU|
|Series name|General purpose single mode|
|Electronic sensor type|Photo-electric sensor|
|Sensor name|XUM|
|Sensor design|Miniature|
|Detection system|Thru beam|
|Material|Plastic|
|Type of output signal|Discrete|
|Supply circuit type|DC|
|Wiring technique<br>Discrete output type<br>Discrete output function<br>Electrical connection<br>Emission<br>[Sn] nominal sensing<br>distance|3-wire<br>PNP<br>1 NO or 1 NC programmable<br>1 male connector M8, 4 pins<br>Red LED thru beam<br>20 m|



## Complementary 

|Enclosure material<br>Lens material<br>Maximum sensing distance<br>Output type<br>Status LED<br>[Us] rated supply voltage<br>Supply voltage limits<br>Switching capacity in mA<br>Switching frequency<br>Maximum voltage drop<br>Current consumption<br>Maximum delay first up<br>Maximum delay response<br>Maximum delay recovery<br>Setting-up<br>Depth<br>Height<br>Width<br>Net weight<br>Kit composition|PBT<br>PMMA<br>30 m<br>Solid state<br>Supply on: 1 LED (green)<br>Receiver/Output: 1 LED (orange)<br>Receiver/supply on: 1 LED (green)<br>12...24 V DC with reverse polarity protection<br>10…30 V DC<br><= 100 mA with overload and short-circuit protection<br><= 1000 Hz<br><2 V<br>20 mA for transmitter<br>20 mA for receiver<br>100 ms<br>0.5 ms<br>0.5 ms<br>Sensitivity by potentiometer<br>20 mm<br>44 mm<br>10 mm<br>0.019 kg<br>Transmitter + receiver XUM2AKXBM8T + XUM2APXBM8R|
|---|---|



Jul 30, 2024 

1 

Environment 

|Environment||
|---|---|
|Product certifications|cULus[RETURN]CE[RETURN]UKCA|
|Ambient air temperature for operation|-30…55 °C|
|Ambient air temperature for storage|-40…70 °C|
|Relative humidity|35…95 %|
|Immunity to ambient light|40000 Lux sunlight|
||10000 lux incandescent light|
|Vibration resistance|9 gn, amplitude = +/- 1.5 mm (f = 10…500 Hz)for every axis conforming to IEC|
||60068-2-6|
|Shock resistance|100 gn (duration = 11 ms) for for every axis conforming to IEC 60068-2-27|
|IP degree of protection|IP67 conforming to IEC 60529|
||IP65 conforming to IEC 60529|



## Packing Units 

|Packing Unitsg UnitsUnits||
|---|---|
|Unit Type of Package 1|PCE|
|Number of Units in Package 1|1|
|Package 1 Height|1.2 cm|
|Package 1 Width|9 cm|
|Package 1 Length|13 cm|
|Package 1 Weight|21 g|
|Unit Type of Package 2|S02|
|Number of Units in Package 2|120|
|Package 2 Height|15 cm|
|Package 2 Width|30 cm|
|Package 2 Length|40 cm|
|Package 2 Weight|3.012 kg|



Offer Sustainability California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov For all Reach Rohs enquiries contact us at sustainability@tesensors.com 

## Contractual warranty 

Warranty 18 months 

2 

## Product data sheet Dimensions Drawings 

## XUM2APXBM8 

## Dimensions 

## Transmitter 

(1) : Transmission 

## Receiver 

(1) : Setting potentiometer (sensitivity) 

- (2) : Setting potentiometer (output) 

(3) : Reception 

3 

Product data sheet Connections and Schema 

XUM2APXBM8 

## Connection and schema 

## Wiring diagram 

1: (+) 

2: Not connected 

3: (-) 

4: OUT/Output 

(a): Transmitter 

(b): Receiver 

(c): Not connected 

4 

## Product data sheet Performance Curves 

## XUM2APXBM8 

## Detection curves 

## Lateral displacement 

- (1): Transmitter 

- (2): Receiver 

- (X): Sensing distance (m) 

- (Y): Lateral displacement (mm) 

## Light beam diameter 

(X): Sensing distance (m) 

(Y): Light beam diameter (mm) 

## Excess gain 

(X): Sensing distance (m) 

(Y): Excess gain 

5