XPSMC16ZPACK

Product data sheet Characteristics 

## XPSMC16ZPACK safety controller XPS-MC - 24 V DC - 16 input - 30 LEDs signalling 

## Main 

|——|——||Main|
|---|---|---|---|
|)|||Range of product<br>Preventa Safety automation|
|we<br>NS<br>&<br>SA<br>Ww|ba <br>:<br>:|tT<br>|<br>||Product or component<br>type<br>Kit configurable safety controller<br>Safety module name<br>XPSMC<br>Safety use category<br>Category 4 maximum EN 954-1/EN/ISO 13849-1<br>PLE maximum EN/ISO 13849-1<br>SIL 3 maximum IEC 61508<br>~~BO~~<br>~~oe~~|
|MyN|{$ i|||Type of start<br>Configurable<br>Standards<br>EN 1760-1/ISO 13856-1<br>EN 954-1/EN/ISO 13849-1<br>~~TTT TTT~~|
||||EN/IEC 60947-5-1|
||||EN 574/ISO 13851|
|Complementary<br>Kit composition<br>Function of module<br>Synchronisation time between inputs<br>Power consumption in W<br>Input protection type<br>[Uc] control circuit voltage|||IEC 61508<br>EN/IEC 61496-1<br>EN/IEC 60204-1<br>Product certifications<br>CSA<br>TÜV<br>UL<br>[Us] rated supply<br>voltage<br>24 V DC - 20...20 %<br>Number of inputs<br>16<br>Communication port<br>protocol<br>Modbus 1 RJ45, serial link 1200 bps, 2400 bps, 4800<br>bps, 9600 bps or 19200 bps<br>Safety level<br>Can reach PL e/category 4 EN 954-1/EN/ISO<br>13849-1<br>Can reach SIL 3 IEC 61508<br>Set of cage clamp terminals<br>Set of screw terminals<br>Ethernet cable 2m<br>Configuration software<br>Connection cable<br>VDE slot screwdriver 2.5 x 75 mm<br>Safety controller<br>Packaging small model for software configuration<br>Printed packaging label 80 x 50 mm<br>USB/RS485 converter<br>Dynamic monitoring of hydraulic valves on linear presses<br>Eccentric press<br>Emergency stop monitoring, with or without time delay, 1 or 2-channel wiring<br>Enabling switch monitoring, 2 or 3 contacts<br>Foot switch monitoring<br>Guard monitoring for injection presses and blowing machines<br>Guard monitoring with 1 or 2 limit switches<br>Hydraulic press<br>Magnetic switch monitoring<br>Monitoring safety stop at top dead centre on eccentric press<br>Muting function of light curtains<br>Position selector<br>Safety mat monitoring<br>Safety time delays<br>Shaft/Chain breaking monitor<br>Zero speed detection<br>Light curtain monitoring category 4 EN/IEC 61496<br>Two-hand control category 3 EN 574/ISO 13851<br>Depending on configuration selected<br>12 W<br>External fuse 16 A<br>28.8 V|



## Complementary 

Jan 20, 2021 

1 

|Maximum line resistance|100 Ohm <6561.68 ft (2000 m)|
|---|---|
|Output type|2 relays, 2 NO contacts (4 NO total)|
||Solid state, 6, volt-free|
|Breaking capacity|180 VA holding AC-15 C300 relay output|
||1800 VA inrush AC-15 C300 relay output|
|Breaking capacity|2 A 24 V static output circuit|
||1.5 A 24 V DC-13)50 ms relay output|
|Output thermal current|4 A for both outputs simultaneously|
||6 A for 1 output and 2 A for the other relay output|
|[Ith] conventional free air thermal current|16 A relay output|
||6.5 A static output circuit|
|Associated fuse rating|16 A gL power supply|
||4 A gL relay output|
||6 A fast blow relay output|
|Minimum output current|10 mA relay output|
|Minimum output voltage|17 V relay output|
|Response time|Configurable : 20 ms or 30 ms with software XPSMCWIN|
|[Ui] rated insulation voltage|300 V 2)IEC 60647-5-1, DIN VDE 0110 part 1|
|[Uimp] rated impulse withstand voltage|4 kV III IEC 60647-5-1, DIN VDE 0110 part 1|
|Method of access|Slave|
|Exchange size|14 words|
|Number of addresses|1…247 Modbus|
|Parity|Even Modbus|
||No Modbus|
||Odd Modbus|
|Data format|1 start bit/8 data bits|
||1 stop bit even or odd|
||2 stop bits without parity|
||RTU (Remote Terminal Unit) mode|
|Supported modbus function|01 8-bit output data/32-bit input data|
||02 32-bit input data/8-bit output data|
||03 information and errors|
|Local signalling|30 LEDs|
|Mounting support|Mounting plate|
|Depth|6.02 in (153 mm)|
|Height|5.96 in (151.5 mm)|
|Width|2.91 in (74 mm)|
|Net weight|1.81 lb(US) (0.82 kg)|
|Environment||
|IP degree of protection|IP20 conforming to EN/IEC 60529|
|Ambient air temperature for operation|14…131 °F (-10…55 °C)|
|Ambient air temperature for storage|-13…185 °F (-25…85 °C)|
|Orderingand shippingdetails||
|Category|22477 - SAFETY MODULES (PREVENTA)|
|Discount Schedule|SAF2|
|GTIN|00785901605140|
|Nbr. of units in pkg.|1|
|Package weight(Lbs)|4.41 lb(US) (2.00 kg)|
|Returnability|No|
|Country of origin|FR|



## Environment 

## Ordering and shipping details 

## Packing Units 

|Packing Unitsg UnitsUnits||
|---|---|
|Unit Type of Package 1|PCE|
|Package 1 Height|9.65 in (24.5 cm)|
|Package 1 width|9.65 in (24.5 cm)|
|Package 1 Length|10.63 in (27 cm)|



2 

## Offer Sustainability 

|Offer Sustainabilityy||||
|---|---|---|---|
|California proposition 65|WARNING: This product can expose you to chemicals including: Lead and||WARNING: This product can expose you to chemicals including: Lead and|
||lead compounds, which is known to the State of California to cause cancer|lead compounds, which is known to the State of California to cause cancer||
||and birth defects or other reproductive harm. For more information go to|||
||www.P65Warnings.ca.gov|||
|EU RoHS Directive|Pro-active compliance (Product out of EU RoHS legal scope)|iy|EU RoHS|
||Declaration|||
|Mercury free|Yes|||
|RoHS exemption information|Yes<br>Ee|||
|China RoHS Regulation|China RoHS Declaration<br>iy|||
|Environmental Disclosure|Product Environmental Profile<br>iy|||
|Circularity Profile|End Of Life Information<br>Ee|||
|WEEE|The product must be disposed on European Union markets following specific|||
||waste collection and never end up in rubbish bins.|||
|PVC free|Yes|||
|Contractual warranty||||
|Warranty|18 months|||



3 

## Product data sheet Dimensions Drawings 

## XPSMC16ZPACK 

## Dimensions 

- 1 When using XPSMCTS• connectors this dimension is 153 mm (6.02 in) When using XPSMCTC• connectors this dimension is 151,5 mm (5.96 in) 

4 

Product data sheet Mounting and Clearance 

## XPSMC16ZPACK 

## Installation 

Metal adaptor for fixing on metal: DIN rail 35 mm/1.38 in. 

5 

Product data sheet Connections and Schema 

## XPSMC16ZPACK 

Wiring Diagrams 

## Refer to the Instruction Sheet 

To download the instruction sheet, follow below procedure: 

- 1 Click on Download & Documents. 2 Click on Instruction sheet. 

6 

## Product data sheet Technical Description 

## XPSMC16ZPACK 

## Safety Functions 

|Safety Functionsy FunctionsFunctions<br>~~[re~~||
|---|---|
|~~[re~~|●Emergency stop monitoring with time delay:<br>○<br>1 channel wiring, with automatic start.<br>○<br>2 channel wiring, with start button.|
|~~[re~~<br>~<br>ii<br>~~me |~~|●Emergency stop monitoring without time delay:<br>○<br>1 channel wiring, with automatic start.<br>○<br>2 channel wiring, with start button.<br>~~|~~|
|~~me |~~|●Two-hand control.<br>~~|~~|
|~~me |~~<br>~~BW|~~|●Guard monitoring:<br>○<br>with 1 limit switch.<br>○<br>with 2 limit switches.<br>○<br>with 2 limit switches, with guard locking.<br>●Guard monitoring for injection presses and blowing machines.<br>~~|~~<br>~~|~~|
|~~BW|~~|●Magnetic switch monitoring.<br>~~|~~|
|~~BW |~~|●Sensing mat monitoring.<br>~~|~~|
||●Light curtains monitoring:<br>○<br>Relay output type.<br>○<br>Solid-state output type.<br>●“Muting” function for light curtains.|
|er<br>——<br>0|●Zero speed detection.|
|=<br>=<br>Li<br>=|●Dynamic monitoring of hydraulic valves on linear presses.|
||●Safety time delays.|
|~~a~~|●Monitoring safety stop at top dead centre on eccentric press.<br>●Hydraulic press.<br>●Eccentric press.|



7 

●Enabling switching monitoring: ○ 2 contact type. ○ 3 contact type. 

Other functions: 

- ●Foot switch monitoring 

- ●Chain shaft breakage monitoring 

- ●Position selector 

8