XMLR040G1N75

_Product datasheet Characteristics_ 

**XMLR040G1N75** Pressure sensors XMLR 40bar - G 1/4 - 24VDC - 0..10 V - NPN - M12 

||**Main**||
|---|---|---|
|Range of product<br>OsiSense XM<br>a|||
||Product or component type|Electronic pressure sensors|
||Pressure sensor type|Pressure transmitter|
|Pressure switch type of operation Pressure transmitter with 1 switching output<br>Device short name<br>XMLR<br>~~I~~|||
||Pressure sensor size|40 bar|
|||580 psi|
||Maximum permissible accidental|Maximum permissible accidental<br>150 bar|
||pressure|2175 psi|
|||15 MPa|
||Destruction pressure|150 bar|
|||2175 psi|
||Controlled fluid<br>Fluid connection type<br>[Us] rated supply voltage|15 MPa<br>Fresh water (0...80 °C)<br>Air (-20...80 °C)<br>Hydraulic oil (-20...80 °C)<br>Refrigeration fluid (-20...80 °C)<br>G 1/4 (female) conforming to DIN 3852-Y<br>24 V DC SELV, voltage limits: 17...33 V|



## **Complementary** 

|Current consumption<br>Electrical connection<br>Analogue output function<br>Type of output signal<br>Analogue output function<br>Discrete output type<br>Maximum switching current<br>Contacts type and composition<br>Scale type<br>Voltage drop<br>Adjustable range of switching point on rising pressure<br>Adjustable range of switching point on falling pressure 2...38.8 bar<br>Minimum differential travel<br>Materials in contact with fluid<br>Front material<br>Housing material<br>Operating position<br>Protection type<br>Response time on output|<= 50 mA<br>4 pins M12 male connector<br>0...10 V<br>Analogue + discrete<br>0...10 V<br>Solid state NPN, NO/NC programmable<br>250 mA<br>NO/NC programmable<br>Fixed differential<br><= 2 V<br>3.2...40 bar<br>46.4...580 psi<br>0.32...4 MPa<br>Adjustable range of switching point on falling pressure 2...38.8 bar<br>29...563 psi<br>0.2...3.88 MPa<br>1.2 bar<br>17.4 psi<br>120 kPa<br>Ceramic<br>Fluorocarbon FKM (Viton)<br>316L stainless steel<br>Polyester<br>Polyacrylamide<br>316L stainless steel<br>Any position, but disposals can falsified the measurement in case of upside down<br>mounting<br>Overload protection<br>Overvoltage protection<br>Reverse polarity<br>Short-circuit protection<br><= 10 ms for analog output<br><= 5 ms for discrete output|
|---|---|



1 / 5 

|Time delay range|0...50 s in steps of 1 second|
|---|---|
|Display type|4 digits 7 segments|
|Local signalling|1 LED yellow for light ON when switch is actuated|
|Display response time type|Fast 50 ms|
||Normal 200 ms|
||Slow 600 ms|
|Delay first up|<= 300 ms|
|Accuracy|<= 1 % of the measuring range|
|Linearity error|<= 0.5 % of the measuring range|
|Hysteresis|<= 0.2 % of the measuring range|
|Measurement accuracy|<= 0.6 % of the measuring range|
|Repeat accuracy|<= 0.2 % of the measuring range|
|Drift of the sensitivity|+/- 0.03 % of measuring range/°C|
|Drift of the zero point|+/- 0.1 % of measuring range/°C|
|Display accuracy|<= 1 % of the measuring range|
|Mechanical durability|>= 10000000 cycles|
|Depth|42 mm|
|Height|93 mm|
|Width|41 mm|
|Product weight|0.19 kg|
|[Uimp] rated impulse withstand voltage|0.5 kV DC|
|Electromagnetic compatibility|Electrostatic discharge immunity test - test level 8 kV air, 4 kV contact conforming to|
||EN/IEC 61000-4-2|
||Susceptibility to electromagnetic fields - test level 10 V/m (80...2000 MHz) conforming|
||to EN/IEC 61000-4-3|
||Electrical fast transient/burst immunity test - test level 2 kV conforming to EN/IEC|
||61000-4-4|
||Surge immunity test - test level 1 kV conforming to EN/IEC 61000-4-5|
||Immunity to conducted RF disturbances - test level 10 V (0.15...80 MHz) conforming|
||to EN/IEC 61000-4-6|



## **Environment** 

|**Environment**||
|---|---|
|marking|CE|
|product certifications|CULus|
||EAC|
|standards|UL 61010-1|
||EN/IEC 61326-2-3|
|ambient air temperature for operation|-20...80 °C|
|ambient air temperature for storage|-40...80 °C|
|IP degree of protection|IP65 conforming to EN/IEC 60529|
||IP67 conforming to EN/IEC 60529|
|vibration resistance|20 gn (f = 10...2000 Hz) conforming to EN/IEC 60068-2-6|
|shock resistance|50 gn conforming to EN/IEC 60068-2-27|



## **Offer Sustainability** 

|**Offer Sustainability**||
|---|---|
|Sustainable offer status|Not Green Premium product|
|RoHS (date code: YYWW)|Compliant - since 1351 - Schneider Electric declaration of conformity|
|REACh|Reference not containing SVHC above the threshold|



**Dimensions** 

2 / 5 

**(1)** Fluid entry: G 1/4 A female 

## **Connections and Schema** 

**Connector Wiring** 

**(1)** I Out or V Out 

## **Analogue Output Description** 

## Analogue Output Signal 

- **X :** Pressure 

- **Y :** Analogue output signal 

- **(1)** An offset of +/-5% of nominal pressure can be compensated (with **Cof** Configuration menu. **Cof** : Offset Compensation) 

- **(2)** The Analogue curve can be adjusted from -25% to +25% of nominal pressure (with **AEP** Configuration menu. **AEP** : analogue end point). 

## **Switching Output Description. Hysteresis Mode** 

“ ” The hysteresis switching mode is typically used for the pumping and/or emptying applications . 

3 / 5 

**X :** Time **Y :** Pressure **(1)** Output **NP :** Nominal Pressure 

- **SP :** Set point (adjustable from 8 % to 100 % NP) 

**rP :** Reset point (adjustable from 5 % to 97 % NP) 

## **Switching Output Description. Window Mode** 

The window switching mode is typically used for the “pressure regulation applications” 

**X :** Time **Y :** Pressure **(1)** Output **NP :** Nominal pressure 

**FH :** High switching point (adjustable from 8 % to 100 % NP) 

**FL :** Low switching point (adjustable from 5 % to 97 % NP) 

## **Switching Output Description. Time Delay** 

The Time Delay is typically used to filter out the fast pressure transients. The output only switches after a time “dS” and “dr” adjustable from 0 to 50 seconds. 

4 / 5 

**X :** Time **Y :** Pressure 

**(1)** Output 

**SP :** Set point **rP :** Reset point 

**dS :** Time delay on the set point **dr :** Time delay on the reset point 

5 / 5