XMLAM01T2C11

Product data sheet Characteristics 

XMLAM01T2C11 vacuum switch XMLA -1 bar - fixed scale 1 threshold - 1 C/O 

## Main 

||~~et~~|
|---|---|
||Range of product<br>OsiSense XM|
|Product or component<br>type<br>Electromechanical pressure sensor<br>Pressure sensor type<br>Electromechanical vacuum sensor<br>Device short name<br>XMLA<br>~~CC~~<br>~~SS~~<br>~~TT~~||
||Pressure sensor size<br>-14.50 psi (-1 bar)|
||Controlled fluid<br>Air 32…320 °F (0…160 °C))|
||Corrosive fluid 32…320 °F (0…160 °C))<br>Fresh water 32…320 °F (0…160 °C))<br>Hydraulic oil (0…160 °C)<br>Fluid connection type<br>G 1/4 (female) conforming to ISO 228<br>Electrical connection<br>1 male connector EN 175301-803-A (ex DIN43650),<br>4 pins<br>Contacts type and<br>composition<br>1 C/O<br>Product specific<br>application<br>-<br>Pressure switch type of<br>operation<br>Detection of 1 single threshold<br>Electrical circuit type<br>Control circuit<br>Scale type<br>Fixed differential<br>Local display<br>With<br>Adjustable range of<br>switching point on rising<br>pressure<br>-11.02…-0.58 psi (-0.76…-0.04 bar)<br>Adjustable range of<br>switching point on falling<br>pressure<br>-14.50…-4.06 psi (-1…-0.28 bar)<br>Maximum permissible<br>accidental pressure<br>130.53 psi (9 bar)<br>Destruction pressure<br>261.07 psi (18 bar)<br>Pressure actuator<br>Diaphragm<br>Materials in contact with<br>fluid<br>316L stainless steel<br>PTFE<br>Enclosure material<br>Zinc alloy<br>Line Rated Current<br>3 A, B300, AC-15 (Ue = 120 V) conforming to EN/<br>IEC 60947-5-1<br>1.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/<br>IEC 60947-5-1<br>0.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/<br>IEC 60947-5-1<br>~~ee~~|



## Complementary 

|Natural differential at low setting<br>Natural differential at high setting<br>Maximum permissible pressure - per cycle<br>Terminal block type<br>Maximum operating rate<br>Repeat accuracy<br>[Ui] rated insulation voltage<br>[Uimp] rated impulse withstand voltage|0.24 bar (+/- 0.05 bar)<br>0.24 bar (+/- 0.05 bar)<br>72.52 psi (5 bar)<br>4 terminals<br>120 cyc/mn<br>2 %<br>300 V conforming to UL 508<br>500 V conforming to EN/IEC 60947-1<br>300 V conforming to CSA C22.2 No 14<br>6 kV EN/IEC 60947-1|
|---|---|



Jan 20, 2021 

1 

|Auxiliary contacts operation|Snap action|||
|---|---|---|---|
|Contacts material|Silver contacts|||
|Maximum resistance across terminals|25 MOhm conforming to IEC 255-7 category 3|||
||25 mOhm conforming to NF C 93-050 method A|||
|Short-circuit protection|10 A cartridge fuse, type gG (gl)|||
|Mechanical durability|3000000 cycles|||
|Setting|External|||
|Height|4.45 in (113 mm)|||
|Depth|2.95 in (75 mm)|||
|Width|1.38 in (35 mm)|||
|Net weight|1.58 lb(US) (0.715 kg)|||
|Environment||||
|Standards|CSA C22.2 No 14|||
||EN/IEC 60947-5-1|||
||CE|||
||UL 508|||
|Product certifications|EAC|||
||UL|||
||BV|||
||CSA|||
||LROS (Lloyds register of shipping)|||
||CCC|||
|Protective treatment|TC standard version|||
|Ambient air temperature for operation|-13…158 °F (-25…70 °C)|||
|Ambient air temperature for storage|-40…158 °F (-40…70 °C)|||
|Operating position|Any position|||
|Vibration resistance|4 gn conforming to IEC 60068-2-6 (f = 30…500 Hz)|||
|Shock resistance|50 gn conforming to IEC 60068-2-27|||
|Electrical shock protection class|Class I conforming to IEC 1140|||
||Class I conforming to IEC 536|||
||Class I conforming to NF C 20-030|||
|IP degree of protection|IP65 EN/IEC 60529|||
|Orderingand shippingdetails||||
|GTIN|03389110710632|||
|Nbr. of units in pkg.|1|||
|Package weight(Lbs)|3.00 oz (85 g)|||
|PackingUnits||||
|Unit Type of Package 1|PCE|||
|Package 1 Height|4.92 in (12.5 cm)|||
|Package 1 width|1.65 in (4.2 cm)|||
|Package 1 Length|3.23 in (8.2 cm)|||
|Offer Sustainability||||
|Sustainable offer status|Green Premium product|||
|California proposition 65|WARNING: This product can expose you to chemicals including: Diisononyl||WARNING: This product can expose you to chemicals including: Diisononyl|
||phthalate (DINP), which is known to the State of California to cause cancer,|||
||and Di-isodecyl phthalate (DIDP), which is known to the State of California||and Di-isodecyl phthalate (DIDP), which is known to the State of California|
||to cause birth defects or other reproductive harm. For more information go to|||
||www.P65Warnings.ca.gov|||
|REACh Regulation|REACh Declaration<br>ay|||
|EU RoHS Directive|Pro-active compliance (Product out of EU RoHS legal scope)|iy|EU RoHS|
||Declaration|||
|Mercury free|Yes|||
|RoHS exemption information|Yes<br>iy|||
|Environmental Disclosure|Product Environmental Profile<br>iy|||



2 

Contractual warranty 

Warranty 18 months 

3 

Product data sheet Dimensions Drawings 

## XMLAM01T2C11 

## Dimensions 

(1) 1 fluid entry, tapped G1/4 (BSP female) 

(2) EN 175301-803-A connector 

Ø : 2 elongated holes Ø 5.2 x 6.7 

4 

Product data sheet Connections and Schema 

## XMLAM01T2C11 

## Wiring Diagram 

## Terminal Model 

## Wiring Diagram 

Vacuum Switch Connector Pin View 

(1) 11 and 13 

(2) 12 (3) 14 

5 

Product data sheet Performance Curves 

## XMLAM01T2C11 

## Operating Curves 

- (x) Rising pressure 

- (y) Falling pressure 

(x) Time 

- (y) Vacuum 

- (1) Adjustable value 

(2) Non adjustable value PH : High point PB : Below point 

6