Image not available
Illustrative purposes only
XLN-60-H-B
LED Driver, IO Adj W/3in1 Dim, LED Lighting, 60 W, 54 V, 1.7 A, Constant Power, 110 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- SVHC: No SVHC (25-Jun-2025)
- Product Range: XLN-60 Series
- Output Current: 1.7A
- LED Driver Mode: Constant Power
- Output Power Max: 60W
- Input Voltage Max: 305V
- Input Voltage Min: 110V
- Output Voltage Max: 54V
- Power Supply Applications: LED Lighting
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 21.0 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## 60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **- XLN 60 series**
**==> picture [42 x 5] intentionally omitted <==**
**----- Start of picture text -----**<br>
User’s Manual<br>**----- End of picture text -----**<br>
**==> picture [108 x 24] intentionally omitted <==**
**----- Start of picture text -----**<br>
CLASS P LED DRIVER<br>LISTED 4HB3 ALis O<br>E334687 Type HL Note.10<br>**----- End of picture text -----**<br>
**IP67** 2 **110 M M EL SELV** ~~am JIA& O~~ aVVY **DC Input: 176-280VDC** [| | a ® Ke @© til CB CE esats ■ **Features** ■ Applications • Constant power mode output with multiple stage • Recessed Light • selectable by NFC setting (H-type) Down Light • • Constant voltage mode output available(12/24/48V) Panel Light • Plastic housing with class Ⅱ and PFC design • Commercial Lighting • • Meet UL8750 Class 2/ Class P power unit Decorative Lighting • • Flicker free, complying with CE ErP directive LED strip lighting • • Standby power consumption <0.5W DALI digital Lighting • Meet emergency lighting (EL) application • Fully encapsulated with IP67 • Minimum dimming level 0.1% (DALI-2 DT6) ■ GTIN CODE • Dimming functions: 3in 1 dimming (Dim-to-off) MW Search: https://www.meanwell.com/serviceGTIN.aspx DALI-2 + Push dimming • 5 years warranty ■ Description XLN-60 Series is a 60W with constant power and constant voltage output LED driver . It can operate from 110~305V AC and output current ranging between 900 mA to 1700 mA selectable by NFC setting. Thanks to high efficiency up to 90%, it is able to operate for -25 ℃ ~90℃ case temperature under free
**==> picture [110 x 27] intentionally omitted <==**
**----- Start of picture text -----**<br>
■ Model Encoding<br>XLN - 60 - H -<br>**----- End of picture text -----**<br>
Type Function H type Blank 12, 24, B H type 12, 24, H type DA2
Note
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Constant Voltage LED Driver
## **SPECIFICATION**
|**SPECIFICATION**|**SPECIFICATION**||||
|---|---|---|---|---|
||||||
|**MODEL**||**XLN-60-12-**|**XLN-60-24-**|**XLN-60-48-**|
|**OUTPUT**|**DC** **VOLTAGE**|12V|24V|48V|
||**DEFAULT** **CURRENT**|5A|2.5A|1.25A|
||**RATED** **POWER**|60W|60W|60W|
||**SETUP,RISE** **TIME**|800ms,180ms/230VAC ,1000ms,180ms/115VAC|||
|**INPUT**|**VOLTAGE** **RANGE**|110~305VAC 155~400VDC|||
||**FREQUENCY** **RANGE**|47 ~ 63Hz|||
||**POWER** **FACTOR**|PF≥0.95/115VAC, PF≥0.95/230VAC,PF≥0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)|||
||**TOTAL** **HARMONIC**<br>**DISTORTION**|THD< 20%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<10%@load 100%/230VAC, THD<10%@Load 100%/115VAC<br>≥<br>≥<br>(Please refer to“TOTAL HARMONIC DISTORTION(THD)” section)|||
||**EFFICIENCY(Typ.)**|86%|87%|88%|
||**AC** **CURRENT**|0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC|||
||**INRUSH** **CURRENT**|COLD START 15A(twidth=310μs measured at 50% Ipeak) at 230VAC; Per NEMA 410|||
||**MAX. NO. of PSUs on 16A**<br>**CIRCUIT** **BREAKER**|25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC|||
||**LEAKAGE** **CURRENT**|<0.75mA / 277VAC|||
||**STANDBY POWERNote5**<br>**CONSUMPTIONNote8**|Standby power consumption<0.5W(Dimming OFF, only for standard version B/DA2-type)|||
|**PROTECTION**|**OVERLOAD**|105~180% rated output power|||
|||Protection type: Hiccup mode, recovers automatically after fault condition is removed.|||
||**SHORT** **CIRCUIT**|Hiccup mode, recovers automatically after fault condition is removed|||
||**OVER** **VOLTAGE**|14-17V|26-35V|52-63V|
|||Shut down output voltage，re-power on to recover|||
||**OVER** **TEMPERATURE**|Shut down output voltage，recovers automatically after fault condition is removed|||
|**ENVIRONMENT**|**WORKING** **TEMP.**|Tcase=-25~90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)|||
||**MAX. CASE** **TEMP.**|Tcase=90℃|||
||**WORKING** **HUMIDITY**|20 ~ 90% RH non-condensing|||
||**STORAGE** **TEMP.,HUMIDITY**|-40 ~ +80℃, 10 ~ 95% RH|||
||**TEMP**.**COEFFICIENT**|±0.03%/℃(0 ~ 50℃)|||
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes|||
|**SAFETY**&**EMC**|**SAFETY** **STANDARDS**|UL8750(type HL and Class P),CSA C22.2 No. 250.13-12;ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J<br>"<br>"<br>suitable for emergency installations(DC input 176-280VDC); BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP<br>TC 004 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13|||
||**DALI** **STANDARDS**|Comply with IEC62386-101, 102, 207|||
||**WITHSTAND** **VOLTAGE**|I/P-O/P:3.75KVAC|||
||**ISOLATION** **RESISTANCE**|I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH|||
||**EMC** **EMISSION**|BS EN/EN55015, BS EN/EN61000-3-2 Class C; BS EN/EN61000-3-3; GB 17625.1,GB/T 17743, EAC TP TC 020|||
||**EMC** **IMMUNITY**|BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020|||
|**OTHERS**|**FLICKERNote.9**|PstLM≤1, SVM≤0.4|||
||**MTBF**|4053.7K hrs min. Telcordia SR-332 (Bellcore) 329.4Khrs min. MIL-HDBK-217F (25℃)|||
||**DIMENSION**|141.5*49*32mm(L*W*H)|||
||**PACKING**|0.49Kg ; 30pcs/15.7Kg/0.81CUFT|||
||1.AllparametersNOTspeciallymentionedaremeasuredat230VACinput,ratedcurrentand25℃ofambienttemperature.<br>2.De-ratingmaybeneededunderlowinputvoltages.Pleasereferto“STATICCHARACTERISTIC”sectionsfordetails.||||
|**NOTE**|3.Lengthofsetuptimeismeasuredatfirstcoldstart.TurningON/OFFthedrivermayleadtoincreaseofthesetuptime.<br>4.Currentrippleismeasured50%~100%ofmaximumvoltageunderratedpowerdelivery.<br>5.Standbypowerconsumptionismeasuredat230VAC.<br>6.Thedriverisconsideredasacomponentthatwillbeoperatedincombinationwithfinalequipment.SinceEMCperformancewillbe<br>affectedbythecompleteinstallation,thefinalequipmentmanufacturersmustre-qualifyEMCDirectiveonthecompleteinstallationagain.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>7.Theambienttemperaturederatingof3.5℃/1000mwithfanlessmodelsandof5℃/1000mwithfanmodelsforoperatingaltitude<br>higherthan2000m(6500ft).<br>8.TofulfillrequirementsofthelatestErPregulationforlightingfixture,thisLEDdrivercanonlybeusedbehindaswitchwithout<br>permanentlyconnectedtothemains.<br>9.FlickerismeasuredatfullloadwithLEDstrip.<br>10.RCMisonavoluntarybasis.NonICclassificationIndependentLEDcontrolgearisnotsuitableforresidentialinstallations.<br>11.Thisseriesmeetsthetypicallifeexpectancyof50000hoursofoperationwhenTcase,particularlytcpoint(orTMP,perDLC),<br>isabout75℃orless.<br>12.Formoreinformation,pleasecontactwithMEANWELLsales.<br>※ProductLiabilityDisclaimer：Fordetailedinformation,pleaserefertohttps://www.meanwell.com/serviceDisclaimer.aspx||||
- 3.�Length�of�set�up�time�is�measured�at�first�cold�start.�Turning�ON/OFF�the�driver�may�lead�to�increase�of�the�set�up�time.
- 4.�Current�ripple�is�measured�50%~100%�of�maximum�voltage�under�rated�power�delivery.
- 5.�Standby�power�consumption�is�measured�at�230VAC.
- 6.�The�driver�is�considered�as�a�component�that�will�be�operated�in�combination�with�final�equipment.�Since�EMC�performance�will�be� ���affected�by�the�complete�installation,�the�final�equipment�manufacturers�must�re-qualify�EMC�Directive�on�the�complete�installation�again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
**NOTE**
- 7.�The�ambient�temperature�derating�of�3.5℃/1000m�with�fanless�models�and�of�5℃/1000m�with�fan�models�for�operating�altitude� ����higher�than�2000m(6500ft).
- 8.�To�fulfill�requirements�of�the�latest�ErP�regulation�for�lighting�fixture,�this�LED�driver�can�only�be�used�behind�a�switch�without� ����permanently�connected�to�the�mains.
- 9.�Flicker�is�measured�at�full�load�with�LED�strip.
- 10.�RCM�is�on�a�voluntary�basis.�Non�IC�classification�Independent�LED�control�gear�is�not�suitable�for�residential�installations.
- 11.This�series�meets�the�typical�life�expectancy�of�50000�hours�of�operation�when�Tcase,particularly�tc�point(or�TMP,per�DLC), ����is�about�75℃�or�less.
- 12.�For�more�information,�please�contact�with�MEAN�WELL�sales.
- ※�Product�Liability�Disclaimer：�For�detailed�information�,�please�refer�to�https://www.meanwell.com/serviceDisclaimer.aspx
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power LED Driver
## **SPECIFICATION**
|**SPECIFICATION**|**SPECIFICATION**||
|---|---|---|
|**MODEL**||**XLN-60-H-**|
|**OUTPUT**|**OPEN CIRCUIT VOLTAGENote14**|60V|
||**DEFAULT CURRENT**|1400mA|
||**CURRENT ADJ. RANGE**<br>**(BY NFC)**|0.9~1.7A|
||**CONSTANT** **CURRENT**<br>**REGION**|9~54V|
||**RATED** **POWER**|60W|
||**CURRENT RIPPLENote4**|<4%|
||**CURRENT TOLERANCE**|±5%|
||**DIMMING** **RANGE**|0~100%|
||**SETUP,RISE TIMENote13**|800ms,100ms/230VAC ,1000ms,100ms/115VAC|
|**INPUT**|**VOLTAGE** **RANGE**|110~305VAC 155~400VDC|
||**FREQUENCY** **RANGE**|47 ~ 63Hz|
||**POWER** **FACTOR**|PF≥0.95/115VAC, PF≥0.95/230VAC, PF≥0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)|
||**TOTAL** **HARMONIC**<br>**DISTORTION**|THD< 20%(@load≥50%/230VAC; @load≥75%/277VAC), THD<10%@load 100%/230VAC, THD<10%@Load 100%/115VAC<br>(Please refer to“TOTAL HARMONIC DISTORTION(THD)” section)|
||**EFFICIENCY(Typ.)Note12**|90%|
||**AC** **CURRENT**|0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC|
||**INRUSH** **CURRENT**|COLD START 15A(twidth=310μs measured at 50% Ipeak) at 230VAC; Per NEMA 410|
||**MAX. NO. of PSUs on 16A**<br>**CIRCUIT** **BREAKER**|25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC|
||**LEAKAGE** **CURRENT**|<0.75mA / 277VAC|
||**STANDBY POWERNote5**<br>**CONSUMPTIONNote8**|Standby power consumption<0.5W (Dimming off, only for standard version B/DA2-type)|
|**PROTECTION**|**SHORT** **CIRCUIT**|Hiccup mode, recovers automatically after fault condition is removed|
||**OVER** **TEMPERATURE**|DA2 type: Stage 1: Derating to 75% loading; stage2: Derating to 50% loading;<br>Recovers automatically after fault condition is removed|
|||Blank & B type: Derating to lowest output level, Recovers automatically after fault condition is removed|
|**ENVIRONMENT**|**WORKING** **TEMP.**|Tcase=-25~90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)|
||**MAX**.**CASE** **TEMP.**|Tcase=90℃|
||**WORKING** **HUMIDITY**|20 ~ 90% RH non-condensing|
||**STORAGE TEMP**.,**HUMIDITY**|-40 ~ +80℃, 10 ~ 95% RH|
||**TEMP**.**COEFFICIENT**|±0.03%/℃(0 ~ 50℃)|
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes|
|**SAFETY**&**EMC**|**SAFETY** **STANDARDS**|UL8750(type HL and Class P),CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J<br>"<br>"<br>suitable for emergency installations(DC input 176-280VDC); BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP<br>TC 004 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13|
||**DALI** **STANDARDS**|Comply with IEC62386-101, 102, 207|
||**WITHSTAND** **VOLTAGE**|I/P-O/P:3.75KVAC|
||**ISOLATION** **RESISTANCE**|I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH|
||**EMC** **EMISSION**|BS EN/EN55015, BS EN/EN61000-3-2 Class C; BS EN/EN61000-3-3; GB 17625.1,GB/T 17743, EAC TP TC 020|
||**EMC** **IMMUNITY**|BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020|
|**OTHERS**|**FLICKER Note9**|PstLM≤1, SVM≤0.4|
||**MTBF**|4053.7Khrs min. Telcordia SR-332 (Bellcore) 329.4Khrs min. MIL-HDBK-217F (25℃)|
||**DIMENSION**|141.5*49*32mm (L*W*H)|
||**PACKING**|0.49Kg ; 30pcs/15.7Kg/0.81CUFT|
||1.AllparametersNOTspeciallymentionedaremeasuredat230VACinput,ratedcurrentand25℃ofambienttemperature.||
|**NOTE**|2.De-ratingmaybeneededunderlowinputvoltages.Pleasereferto“STATICCHARACTERISTIC”sectionsfordetails.<br>3.Lengthofsetuptimeismeasuredatfirstcoldstart.TurningON/OFFthedrivermayleadtoincreaseofthesetuptime.<br>4.Currentrippleismeasured50%~100%ofmaximumvoltageunderratedpowerdelivery.<br>5.Standbypowerconsumptionismeasuredat230VAC.<br>6.Thedriverisconsideredasacomponentthatwillbeoperatedincombinationwithfinalequipment.SinceEMCperformancewillbe<br>affectedbythecompleteinstallation,thefinalequipmentmanufacturersmustre-qualifyEMCDirectiveonthecompleteinstallationagain.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>7.Theambienttemperaturederatingof3.5℃/1000mwithfanlessmodelsandof5℃/1000mwithfanmodelsforoperatingaltitudehigher<br>than2000m(6500ft).<br>8.TofulfillrequirementsofthelatestErPregulationforlightingfixture,thisLEDdrivercanonlybeusedbehindaswitchwithout<br>permanentlyconnectedtothemains.<br>9.FlickerismeasuredatfullloadwithLEDmodules.<br>10.RCMisonavoluntarybasis.NonICclassificationIndependentLEDcontrolgearisnotsuitableforresidentialinstallations.<br>11.Thisseriesmeetsthetypicallifeexpectancyof50000hoursofoperationwhenTcase,particularlytcpoint(orTMP,perDLC),isabout<br>75℃orless.<br>12.Efficiencyismeasuredat1050mA/54VoutputsetbyDIPswitch.<br>13.BasedonIEC62386-101/102DALIpowerontimingandinterruptionregulations,thesetuptimeneedstotestwithaDALIcontroller<br>whichcansupportforDALIpoweronfunction,otherwisethestartuptimewillbehigherthan0.5second.<br>14.Outputhiccupsunderno-loadcondition.(onlyforH-type).<br>15.Formoreinformation,pleasecontactwithMEANWELLsales.<br>※ProductLiabilityDisclaimer：Fordetailedinformation,pleaserefertohttps://www.meanwell.com/serviceDisclaimer.aspx||
- 2.�De-rating�may�be�needed�under�low�input�voltages.�Please�refer�to�“STATIC�CHARACTERISTIC”�sections�for�details.
- 3.�Length�of�set�up�time�is�measured�at�first�cold�start.�Turning�ON/OFF�the�driver�may�lead�to�increase�of�the�set�up�time.
- 4.�Current�ripple�is�measured�50%~100%�of�maximum�voltage�under�rated�power�delivery.
- 5.�Standby�power�consumption�is�measured�at�230VAC.
- 6.�The�driver�is�considered�as�a�component�that�will�be�operated�in�combination�with�final�equipment.�Since�EMC�performance�will�be� ���affected�by�the�complete�installation,�the�final�equipment�manufacturers�must�re-qualify�EMC�Directive�on�the�complete�installation�again.
- (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
- 7.�The�ambient�temperature�derating�of�3.5℃/1000m�with�fanless�models�and�of�5℃/1000m�with�fan�models�for�operating�altitude�higher� ����than�2000m(6500ft).
- 8.�To�fulfill�requirements�of�the�latest�ErP�regulation�for�lighting�fixture,�this�LED�driver�can�only�be�used�behind�a�switch�without�
- **NOTE** ����permanently�connected�to�the�mains.
- 9.�Flicker�is�measured�at�full�load�with�LED�modules.
- 10.�RCM�is�on�a�voluntary�basis.�Non�IC�classification�Independent�LED�control�gear�is�not�suitable�for�residential�installations.
- 11.This�series�meets�the�typical�life�expectancy�of�50000�hours�of�operation�when�Tcase,particularly�tc�point(or�TMP,per�DLC),�is�about� 75℃�or�less.
- 12.�Efficiency�is�measured�at�1050mA/54V�output�set�by�DIP�switch.
- 13.�Based�on�IEC�62386-101/102�DALI�power�on�timing�and�interruption�regulations,�the�set�up�time�needs�to�test�with�a�DALI�controller� �����which�can�support�for�DALI�power�on�function,�otherwise�the�start�up�time�will�be�higher�than�0.5�second. 14.Output�hiccups�under�no-load�condition.(only�for�H-type).
- 15.�For�more�information,�please�contact�with�MEAN�WELL�sales.
※ Product�Liability�Disclaimer：For�detailed�information,please�refer�to�https://www.meanwell.com/serviceDisclaimer.aspx
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **BLOCK DIAGRAM**
**==> picture [453 x 108] intentionally omitted <==**
**----- Start of picture text -----**<br>
EMI FILTER POWER RECTIFIERS +V<br>I/P & SWITCHING & DC to DC -V<br>RECTIFIERS FILTER<br>O.T.P. CURRENT & DA+/PUSH<br>VOLTAGE LIMIT DA-/N<br>DETECTION<br>PWM&PFC<br>O.L.P. CIRCUIT<br>CONTROL<br>**----- End of picture text -----**<br>
## **DRIVING METHODS OF LED MODULE**
- ※ I-V Operating�Area ◎ **XLN-60-H**
**==> picture [239 x 173] intentionally omitted <==**
**----- Start of picture text -----**<br>
For 60W application<br>60V<br>55V 900mA, 54V 1050mA, 54V<br>50V<br>45V 1400mA, 43V<br>40V<br>1700mA, 36V<br>35V<br>30V<br>25V<br>20V<br>15V<br>10V<br>900mA, 9V 1700mA, 9V<br>5V<br>0V<br>600mA 800mA 1000mA 1200mA 1400mA 1600mA 1800mA<br>**----- End of picture text -----**<br>
## **CONSTANT POWER TABLE**
XLN-60-H is a multiple-stage constant power driver, selection of output current through NFC setting is exhibited below.
**==> picture [106 x 154] intentionally omitted <==**
**----- Start of picture text -----**<br>
Vo Io<br>9~54V 900mA<br>9~54V 1050mA<br>9~50V 1200mA<br>9~46V 1300mA<br>9~43V 1400mA(default)<br>9~40V 1500mA<br>9~38V 1600mA<br>9~36V 1700mA<br>**----- End of picture text -----**<br>
Note: 1.The operating voltage range which show on this table is recommend to use.
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **NFC Function Description**
The output current of the NFC Mode LED driver can be adjusted using NFC via the mobile APP Operation Instruction:
- ·Compatible phone
**==> picture [79 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
TM 4.1 or IOS12 updates.<br>**----- End of picture text -----**<br>
Install an NFC-compatible smart mobile device or phone with Android
- ·Steps for setting output current via NFC
1. Download Meanwell APP on mobile device or mobile phone, and enable NFC function.
2. Check the NFC antenna position of the mobile phone please.
3. Enter Meanwell APP ->Top left menu –Installation Manual/APP->PowerNFC， approach the LED driver NFC sensing position and perform sensing.
4. APP displays the functional parameters, and the relevant parameters are modified as required.
5. Tap the APP write button and quickly move the phone antenna close to the NFC sensing position of the LED driver.
6. The write completes when the mobile phone displays"Success".
## **APP Function Description**
## ※ **APP Interface:**
**==> picture [483 x 186] intentionally omitted <==**
**----- Start of picture text -----**<br>
Model name<br>Adjustable Output > , Current LevelOutput Current<br>Current Setting mA Setting 708mA <+<_<br>Current<br>NFC setting passwor d GTIN<br>» Pass word fe ) L GTIN 4711287510620<br>_) Address Accumulating Back<br>Device address |<br>Factory setting ‘<br>Setting to LED Driver<br>**----- End of picture text -----**<br>
- •To be used through APP available on Apple Store and Google Play Store for iOS and Android, Search ‘MEAN WELL’ on
Note: Current accuracy: the numerical error between the set current and the actual current is within 2%.
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **DIMMING OPERATION**
## ◎ **B type**
- ※ **3 in 1 dimming function**
- •Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
- •Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
- •Dimming source current from power supply: 100μA (typ.)
**==> picture [157 x 469] intentionally omitted <==**
**----- Start of picture text -----**<br>
100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N<br>(N=driver quantity for synchronize d dimmin g operatio)n<br>Dimming input: Additive resistance<br>Output current (%)<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br>
**==> picture [215 x 96] intentionally omitted <==**
**----- Start of picture text -----**<br>
+<br>Vo+ +<br>-<br>Vo- -<br>DIM+<br>+<br>Additive Voltage<br>-<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>
**==> picture [215 x 96] intentionally omitted <==**
**----- Start of picture text -----**<br>
+<br>Vo+ +<br>-<br>Vo- -<br>DIM+<br>Additive PWM signal<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>
**==> picture [224 x 120] intentionally omitted <==**
**----- Start of picture text -----**<br>
◎ Applying additive resistance: 0~100kΩ<br>+<br>Vo+ +<br>-<br>Vo- -<br>DIM+<br>Additive Resistance<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
**==> picture [419 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.<br>**----- End of picture text -----**<br>
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **DIMMING OPERATION**
- **DA2 type (DALI-2 digital dimming function)**
**==> picture [479 x 96] intentionally omitted <==**
**----- Start of picture text -----**<br>
※ Input wiring diagram<br>DA-/N<br>DA+/PUSH<br>AC/L -V<br>AC/N +V<br>**----- End of picture text -----**<br>
## ※ **PUSH dimming (primary side)**
- The factory default dimming level is at 100%.
- If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver.
- Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button.
- The maximum length of the cable from the push button to the last driver is 20 meters.
**==> picture [343 x 51] intentionally omitted <==**
**----- Start of picture text -----**<br>
Action Action duration Function<br>Short Push 0.1~1s Turn ON-OFF the driver<br>Double Click Click twice in 1.5s Set up the dimming level to 100%<br>Long Push 1.5~10s Every Long Push changes the dimming direction, dimming up or down<br>**----- End of picture text -----**<br>
## **PWM OUTPUT DIMMING PRINCIPLE**
## ※ **For 12V/24V/48V PWM style output dimming**
- •Dimming is achieved by varying the duty cycle of the output current.
**==> picture [441 x 108] intentionally omitted <==**
**----- Start of picture text -----**<br>
ON<br>Output DC current TON<br>Duty cycle(%) = ×100%<br>T<br>OFF Output PWM frequency :<br>Io=0A 4kHz for B-Type fixed (Typ.)<br>TON 3.2kHz for DA2-Type fixed (Typ.)<br>T<br>**----- End of picture text -----**<br>
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **OUTPUT LOAD vs TEMPERATURE**
**==> picture [472 x 135] intentionally omitted <==**
**----- Start of picture text -----**<br>
100 100<br>12,24V/230VAC<br>80 80<br>48V/H Type<br>60 60<br>110VAC<br>40 40<br>20 20<br>-25 -15 0 15 30 40 45 50 60 70 (HORIZONTAL) -25 0 20 45 55 65 75 85 90 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) Tcase ( ℃ )<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br>
## **STATIC CHARACTERISTIC**
**==> picture [193 x 138] intentionally omitted <==**
**----- Start of picture text -----**<br>
100<br>90<br>80<br>70<br>60<br>50<br>40<br>100 110 130 150 170 190 210 230 250 270 290 305<br>INPUT VOLTAGE (V) 60Hz<br>※De-rating is needed under low input voltage.<br>LOAD (%)<br>**----- End of picture text -----**<br>
## **LIFE TIME**
**==> picture [349 x 192] intentionally omitted <==**
**----- Start of picture text -----**<br>
120<br>100<br>80<br>60<br>40<br>20<br>0<br>25 30 35 40 45 50 55 60 65 70 75 80 85 90<br>Tcase( )℃<br>(Kh)<br>LIFETIME<br>**----- End of picture text -----**<br>
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
60W Multiple-Stage Constant Power/Constant Voltage LED Driver
## **TOTAL HARMONIC DISTORTION (THD)**
**==> picture [490 x 614] intentionally omitted <==**
**----- Start of picture text -----**<br>
※ Tcase at 75℃<br>16 16<br>14 14<br>12 12<br>10 10<br>8 110VAC 8 110VAC<br>6 230VAC 6 230VAC<br>277VAC 277VAC<br>4 4<br>2 2<br>0 0<br>50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>(1400mA) (1700mA)<br>POWER FACTOR (PF) CHARACTERISTIC<br>※ Tcase at 75℃<br>1 1<br>0.95 0.95<br>0.9 0.9<br>110VAC 110VAC<br>0.85 0.85<br>230VAC 230VAC<br>0.8 277VAC 0.8 277VAC<br>0.75 0.75<br>0.7 0.7<br>50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>(1400mA) (1700mA)<br>EFFICIENCY vs LOAD<br>XLN-60 series possess superior working efficiency that up to 90% can be reached in field applications.<br>※ Tcase at 75℃<br>95 95<br>90 90<br>85 85<br>80 80<br>75 75 110VAC<br>110VAC<br>70 70 230VAC<br>230VAC<br>65 65 277VAC<br>277VAC<br>60 60<br>55 55<br>50 50<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>(1400mA) (1700mA)<br>THD THD<br>PF PF<br>EFFICIENCY (%) EFFICIENCY (%)<br>**----- End of picture text -----**<br>
_File Name:XLN-60-SPEC 2024-03-08_
**- XLN 60 series**
## 60W Multiple-Stage Constant Power/Constant Voltage LED Driver
**==> picture [507 x 509] intentionally omitted <==**
**----- Start of picture text -----**<br>
MECHANICAL SPECIFICATION Case No.XLN-60 Unit:mm<br>※ Blank�type<br> 150 141.5 150<br>4<br>110 mm<br>AC/L(Brown)<br>AC/N(Blue) tc 70.8 -V(Black)<br>SJOW 17AWGx2C&<br>H05RN-F 2x1.0mm² +V(Red)<br>SJOW 17AWGx2C&05RN-F 2x1.0mm²<br>4<br>※ B�type<br> 150 141.5 180<br>4<br>UL2517(18AWG*2)<br>AC/L(Brown) DIM-(Pink)<br>AC/N(Blue) tc 70.8 DIM+(Purple)<br>SJOW 17AWGx2C&<br>H05RN-F 2x1.0mm² -V(Black)<br>+V(Red)<br>SJOW 17AWGx2C&05RN-F 2x1.0mm²<br> 150<br>4<br>※ DA2�type<br> 180 141.5 150<br>4<br>UL2517(18AWG*2)<br>DA-/N(Pink)<br>DA+/PUSH(Purple)<br>AC/L(Brown) tc 70.8 -V(Black)<br>AC/N(Blue) +V(Red)<br>SJOW 17AWGx2C&<br>H05RN-F 2x1.0mm² SJOW 17AWGx2C&05RN-F 2x1.0mm²<br> 150<br>4<br>Current adjustable<br>2-<br>ψ<br>3.6<br>2-<br>ψ<br>3.6<br>2-<br>ψ<br>3.6<br>4<br>49 mm<br>24.5<br>4<br>4<br>49 mm<br>24.5<br>4<br>4<br>49 mm<br>24.5<br>4<br>32<br>**----- End of picture text -----**<br>
## **Installation Manual**
Please refer to : http://www.meanwell.com/manual.html
_File Name:XLN-60-SPEC 2024-03-08_
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →