XLH736096.000000I

IDT XO HCMOS Crystal Oscillator 

**XLH** 

**DATASHEET** 

## **Description** 

The XLH is an HCMOS Crystal Oscillator with 750fs typical phase jitter over 12kHz to 20 MHz bandwidth. Available in a wide frequency range from 0.750MHz to 250MHz, the IDT XLH Series Crystal Oscillator utilizes a family of proprietary ASICs, with a key focus on noise reduction technologies. 

The 3rd order Delta Sigma Modulator reduces noise to the levels that are comparable to traditional Bulk Quartz and SAW oscillators. With short lead-time, low cost, low noise, wide frequency range, excellent ambient performance, the XLH is an excellent choice over the conventional technologies. The XLH has stabilities as tight as ±20ppm with extremely quick delivery for both standard and custom frequencies 

## **Features** 

- Frequency range: 0.750 to 250MHz 

- Output Type: HCMOS/LVCMOS Compatible 

- Frequency Stability: ± 20ppm, ± 25ppm, ± 50ppm, or ± 100 ppm 

- Supply Voltage: 2.5V or 3.3V 

- Phase Jitter (1.875MHz to 20MHz): 225fs typical 

- Phase Jitter (12kHz to 20MHz): 750fs typical 

- Package options: 3.2mm x 2.5mm x 1.0mm (JX4) 5.0mm x 3.2mm x 1.2mm (JS4) 7.0mm x 5.0mm x 1.3mm (JU4) 

- Operating Temperatures: -20°C to +70°C or -40°C to +85°C 

## **Pin Assignment** 

**==> picture [81 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 3<br>1 2<br>6-pin CLCC<br>VDD OUT<br>NC<br>NC<br>E/D GND<br>**----- End of picture text -----**<br>


## **Pin Descriptions** 

|**Pin Number**|**Pin Name**|**Description**|
|---|---|---|
|1|E/D|Enable/Disable1(0=Output Disabled)|
|2|GND|Connect to ground|
|3|OUT|Output|
|4|VDD|Supply voltage|



1. Pulled high internally. 

©2017 Integrated Device Technology, Inc. 

XLH   JUNE 20, 2017 

1 

XLH  DATASHEET 

## **Absolute Maximum Ratings** 

Stresses above the ratings listed below can cause permanent damage to the XLH. These ratings, which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. 

**Item Rating** VDD -0.5 to +5.0V E/D -0.5 V to VDD + 0.5V OUT -0.5 V to VDD + 0.5 Storage Temperature -55°C to 125°C Theta Ja (Junction to Ambient) 102°C/W – Still Air ~~——=—~~ **ESD Compliance** Human Body Model (HBM 1000V Machine Model (MM) 150V **Mechanical Testing Parameter Test Method** Mechanical Shock Drop from 75cm to hardwood surface–3 times Mechanical Vibration 10~55Hz, 1.5mm amplitude, 1 minute sweep 2 hours each in 3 directions (X, Y, Z) High Temperature Burn-in Under power at 125°C for 2000 hours Hermetic Seal He pressure: 4 ±1kgf/cm[2] 2 hour soak **Solder Reflow Profile** tP 10 seconds Max within 5°C of 260°C peak ~~———~~ 260°C Ramp up 3°C/s Max 225°C Ramp down not 50 ±10 to exceed 6°C/s 180°C seconds above 225°C reflow area 160°C 120 ±20 seconds in pre-heating area 25°C 400 seconds MAX from +25°C to 260°C peak 

IDT XO HCMOS CRYSTAL OSCILLATOR 

JUNE 20, 2017 

2 

XLH   DATASHEET 

## **DC Characteristics** 

( **VDD= 3.3V** ±5%, TA= - 20°C to +70°C; -40° to +85°C) 

|(**VDD= 3.3VDD= 3.3V= 3.3V**±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|||||
|---|---|---|---|---|---|---|
|**Parameter**|**Symbol**|**Condition**|**Min**|**Typ**|**Max**|**Units**|
|Power Supply Current|IDD|Standard Frequencies|||55|mA|
|Output HIGH Voltage|VOH|Fout = 0.750 to 150MHz<br>Fout = 150+ to 250MHz|90%VDD<br>80%VDD|||V|
|Output LOW Voltage|VOL|Fout = 0.750 to 150MHz<br>Fout = 150+ to 250MHz|||10%VDD<br>20%VDD|V|
|Enable/Disable Input HIGH Voltage<br>(Output enabled)*|VIH||70%VDD|||V|
|Enable/Disable Input LOW Voltage<br>(Output disabled)|VIL||||30%VDD|V|



* A pullup resistor from pin 4 (VDD) to pin 1 (E/D) enables output when pin 1 is left open. 

## **AC Characteristics** 

( **VDD= 3.3V** ±5%, TA= - 20°C to +70°C; -40° to +85°C) 

|(**VDD= 3.3VDD= 3.3V= 3.3V**±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|||||
|---|---|---|---|---|---|---|
|**Parameter**<br>~~eG~~|**Symbol**<br>~~eG~~|**Condition**<br>~~GO~~|**Min**<br>~~GO~~|**Typ**|**Max**|**Units**|
|Output Frequency Range<br>~~eG~~<br>~~pf~~<br>~~ee ee~~|FOUTR<br>~~eG ~~<br>~~pf~~<br>~~ee~~|~~GO~~<br>~~pf~~<br>~~ee~~|0.750<br>~~GO~~<br>~~pf~~<br>~~ee~~|~~pf~~<br>~~ee~~|250<br>~~pf~~|MHz<br>~~pf~~|
|Frequency Stability<br>~~pf~~<br>~~ee ee~~|~~pf~~<br>~~ee~~|Temperature = -20°C to +70°C<br>~~pf~~<br>~~ee~~|±20<br>~~pf~~<br>~~ee~~|~~pf~~<br>~~ee~~|±100<br>~~pf~~|ppm<br>~~pf~~|
||~~ee~~<br>~~a~~|Temperature = -40°C to +85°C<br>~~ee~~|±25<br>~~ee~~|~~ee~~|±100|ppm|
|Aging (1styear)<br>~~ee ee~~<br>~~pf~~|~~ee~~<br>~~a~~<br>~~pf~~|Ta = 25°C<br>~~ee~~<br>~~pf~~|~~ee~~<br>~~pf~~|~~ee~~<br>~~pf~~|±3<br>~~pf~~|~~pf~~|
|Aging (10 years)<br>~~pf~~<br>~~pf~~|~~pf~~<br>~~pf~~|Ta = 25°C<br>~~pf~~<br>~~pf~~|~~pf~~<br>~~pf~~<br>~~GC~~|~~pf~~<br>~~pf~~<br>~~GC~~|±10<br>~~pf~~<br>~~pf~~|~~pf~~<br>~~pf~~|
|Output Load<br>~~GG~~|~~GG~~|~~GG~~|~~GG~~<br>~~GC~~|~~GG~~<br>~~GC~~|15<br>~~GG~~|pF<br>~~GG~~|
|Start-up Time<br>~~GG~~|TST<br>~~GG~~|Output valid time after VDD meets<br>minimum specified level<br>~~GG~~|~~GG~~<br>~~GC~~<br>~~GC~~|~~GG~~<br>~~GC~~<br>~~GC~~|10<br>~~GG~~|ms<br>~~GG~~|
|Output Rise Time<br>~~GG~~<br>~~eG~~|~~GG~~<br>~~eG~~|20% to 80% VDD<br>~~GG~~<br>|~~GG~~<br>~~GC~~<br>~~GG~~<br>|~~GG~~<br>~~GC~~<br>~~GG~~|3<br>~~GG~~<br>~~GG~~|ns<br>~~GG~~|
|Output Fall Time<br>~~GG~~<br>~~GG~~<br>~~eG~~|~~GG~~<br>~~GG~~<br>~~eG~~|80% to 20% VDD<br>~~GG~~<br>~~GG~~<br>|~~GG~~<br>~~GC~~<br>~~GG~~<br>~~GG~~<br>|~~GG~~<br>~~GC~~<br>~~GG~~<br>~~GG~~|3<br>~~GG~~<br>~~GG~~<br>~~GG~~|ns<br>~~GG~~<br>~~GG~~|
|Duty Cycle<br>~~GG~~<br>~~eG~~|TDTCY<br>~~GG~~<br>~~eG~~|At 50% VDD<br>~~GG~~<br>~~GG~~|45<br>~~GG~~<br>~~GG~~<br>~~GG~~<br>~~GC~~|~~GG~~<br>~~GG~~<br>~~GC~~|55<br>~~GG~~<br>~~GG~~|%<br>~~GG~~|
|Output Enable/ Disable Time<br>~~eG~~<br>~~GG~~<br>~~ee~~|TOE<br>~~eG ~~<br>~~GG~~<br>|~~GG~~<br>~~GG~~<br>|~~GG~~<br>~~GG~~<br>~~GG~~<br>~~GC~~<br>~~GG~~|~~GG~~<br>~~GG~~<br>~~GC~~<br>~~GG~~|100<br>~~GG~~<br>~~GG~~<br>~~GG~~|ns<br>~~GG~~|
|Period Jitter, RMS<br>~~GG~~<br>~~GG~~<br>~~ee~~<br>~~ee~~|JPER<br>~~GG~~<br>~~GG~~<br>~~ee~~|Frequency = 125MHz<br>~~GG~~<br>~~GG~~<br>~~ee~~|~~GG~~<br>~~GC~~<br>~~GG~~<br>~~GG~~<br>~~ee~~|3<br>~~GG~~<br>~~GC~~<br>~~GG~~<br>~~GG~~<br>~~ee~~|~~GG~~<br>~~GG~~<br>~~GG~~<br>~~ee~~|psec<br>~~GG~~<br>~~GG~~<br>~~ee~~|
|Random Jitter<br>~~GG~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|RJ<br>~~GG~~<br>~~ee~~|Frequency = 125MHz<br>Per MJSQ spec (Methodologies for<br>Jitter and Signal Quality specifications)<br>~~GG~~<br>~~ee~~<br>|~~GG~~<br>~~GG~~<br>~~ee~~|1.2<br>~~GG~~<br>~~GG~~<br>~~ee~~|~~GG~~<br>~~GG~~<br>~~ee~~<br>~~ee~~|psec<br>~~GG~~<br>~~ee~~<br>~~ee~~|
|Deterministic Jitter<br>~~ee ~~<br>~~ee~~<br>~~ee~~<br>~~eG~~|DJ<br> ~~ee~~<br>~~eG~~||~~GG~~<br>~~ee~~<br>~~ee~~<br>|8<br>~~GG~~<br>~~ee~~<br>~~ee~~|~~GG~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|psec<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|
|Total Jitter<br> <br>~~ee~~<br>~~ee~~<br>~~eG~~|TJ<br> ~~ee~~<br>~~eG~~||~~ee ~~<br>~~ee~~<br>~~ee~~<br>|25.2<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|~~ee ~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|psec<br> ~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|
|Phase Jitter (12kHz – 20MHz)<br>~~ee~~<br>~~eG~~|JITTER<br>~~eG~~|Frequency = 125MHz<br>~~GG~~|~~ee~~<br>~~GG~~|0.75<br>~~ee~~|~~ee ~~<br>~~ee~~<br>~~ee~~|psec<br> ~~ee~~<br>~~ee~~<br>~~ee~~|
|Phase Noise Performance<br>Frequency = 125MHz<br>~~eG~~|NOISE<br>~~eG ~~|100Hz of Carrier<br> ~~GG~~<br>~~a~~|~~GG~~<br>~~a~~|-95<br>~~a~~|~~ee ~~<br>~~a~~|dBc/Hz<br> ~~ee~~<br>~~a~~|
|||1kHz of Carrier<br>~~a~~<br>~~ee~~|~~a~~<br>~~ee~~|-118<br>~~a~~<br>~~ee~~|~~a~~<br>~~ee~~|dBc/Hz<br>~~a~~<br>~~ee~~|
|||10kHz of Carrier<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|-120<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|dBc/Hz<br>~~ee~~<br>~~ee~~|
|||100kHz of Carrier<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|-124<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|dBc/Hz<br>~~ee~~<br>~~ee~~|
|||1MHz of Carrier<br>~~ee~~|~~ee~~|-143<br>~~ee~~|~~ee~~|dBc/Hz<br>~~ee~~|
|||10MHz of Carrier<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|-153<br>~~ee~~<br>~~ee~~|~~ee~~<br>~~ee~~|dBc/Hz<br>~~ee~~<br>~~ee~~|
|Output Frequency (Standards)|FOUT|10MHz, 12MHz, 12.288MHz, 16MHz, 20MHz, 24MHz, 24.576MHz, 25MHz,<br>33.333MHz, 40MHz, 48MHZ, 50MHz, 100MHz, 125MHz, 156.25MHz<br>(Contact IDT for additional frequencies)<br>~~ee~~|||||



Note: Inclusive of initial frequency accuracy, operating temperature range, supply variation, load variation, 3 times solder reflow, shock, vibration and 1 year aging at 25°C. We do not recommend hand soldering the devices 

IDT XO HCMOS CRYSTAL OSCILLATOR 

JUNE 20, 2017 

3 

XLH  DATASHEET 

## **DC Characteristics** 

( **VDD= 2.5V** ±5%, TA= - 20°C to +70°C; -40° to +85°C) 

|(**VDD= 2.5VDD= 2.5V= 2.5V**±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|||||
|---|---|---|---|---|---|---|
|**Parameter**|**Symbol**|**Condition**|**Min**|**Typ**|**Max**|**Units**|
|Power Supply Current|IDD|Standard Frequencies|||35|mA|
|Output HIGH Voltage|VOH|Fout = 0.750 to 160MHz<br>Fout = 160+ to 180MHz|10%VDD<br>20%VDD|||V|
|Output LOW Voltage|VOL|Fout = 0.750 to 160MHz<br>Fout = 160+ to 180MHz|||10%VDD<br>20%VDD|V|
|Enable/Disable Input HIGH Voltage<br>(Output enabled)*|VIH||70%VDD|||V|
|Enable/Disable Input LOW Voltage<br>(Output disabled)|VIL||||30%VDD|V|



* A pullup resistor from pin 4 (VDD) to pin 1 (E/D) enables output when pin 1 is left open. 

## **AC Characteristics** 

( **VDD= 2.5V** ±5%, TA= - 20°C to +70°C; -40° to +85°C) 

|(**VDD= 2.5VDD= 2.5V= 2.5V**±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|±5%, TA= - 20°C to +70°C; -40° to +85°C)A= - 20°C to +70°C; -40° to +85°C)= - 20°C to +70°C; -40° to +85°C)|||||
|---|---|---|---|---|---|---|
|**Parameter**<br>~~a~~|**Symbol**|**Condition**|**Min**|**Typ**|**Max**|**Units**|
|Output Frequency Range<br>~~a~~<br>~~a~~|FOUTR<br>~~ee ee~~|~~ee ee~~|0.750<br>~~ee~~|~~ee~~|180<br>~~ee~~|MHz<br>~~ee~~|
|Frequency Stability<br>~~a~~<br>~~a~~|~~ee ee~~|Temperature = -20°C to +70°C<br>~~ee ee~~|±20<br>~~ee~~|~~ee~~|±100<br>~~ee~~|ppm<br>~~ee~~|
||~~ee ee~~<br>~~a~~|Temperature = -40°C to +85°C<br>~~ee ee~~|±25<br>~~ee~~|~~ee~~|±100<br>~~ee~~|ppm<br>~~ee~~|
|Output Load<br>~~a~~|~~ee ee~~<br>~~a~~|~~ee ee~~|~~ee~~|~~ee~~|15<br>~~ee~~|pF<br>~~ee~~|
|Start-up Time<br>~~a~~|TST<br>~~ee~~|Output valid time after VDD meets<br>minimum specified level<br>~~ee~~|~~ee~~|~~ee~~|10<br>~~ee~~|ms<br>~~ee~~|
|Output Rise Time<br>~~a ~~<br>~~a~~|~~ee~~|20% to 80% VDD<br>~~ee~~|~~ee~~|~~ee~~|3<br>~~ee~~|ns<br>~~ee~~|
|Output Fall Time<br>~~a~~<br>~~a~~||80% to 20% VDD|||3|ns|
|Duty Cycle<br>~~a~~<br>~~a~~|TDTCY|At 50% VDD|45||55|%|
|Output Enable/ Disable Time<br>~~a~~<br>~~a~~|TOE||||100|ns|
|Period Jitter, RMS<br>~~a~~<br>~~a~~|JPER|Frequency = 125MHz||3.3||psec|
|Random Jitter<br>~~a~~<br>~~a~~|RJ|Frequency = 125MHz<br>Per MJSQ spec (Methodologies for<br>Jitter and Signal Quality specifications)|~~a~~|1.3<br>~~a~~||psec|
|Deterministic Jitter<br>~~a~~<br>~~a~~|DJ||~~a ~~<br>~~a~~|6.7<br> ~~a~~<br>~~a~~||psec|
|Total Jitter<br>~~a~~<br>~~oo~~|TJ<br>~~oo~~||~~a ~~<br>~~a~~|25.6<br> ~~a~~<br>~~a~~||psec|
|Phase Jitter (12kHz – 20MHz)<br>~~oo~~<br>~~a~~|JITTER<br>~~oo~~<br>|Frequency = 125MHz<br>|~~a ~~<br>|0.85<br> ~~a~~<br>||psec<br>|
|Phase Noise Performance<br>Frequency = 125MHz<br>~~a ~~|NOISE<br>|100Hz of Carrier<br> ~~a~~|~~a~~|-91<br>~~a~~|~~a~~|dBc/Hz<br>~~a~~|
|||1kHz of Carrier<br> ~~a~~<br>~~a~~|~~a~~<br>~~a~~|-107<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|dBc/Hz<br>~~a~~<br>~~a~~|
|||10kHz of Carrier<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|-117<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|dBc/Hz<br>~~a~~<br>~~a~~|
|||100kHz of Carrier<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|-123<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|dBc/Hz<br>~~a~~<br>~~a~~|
|||1MHz of Carrier<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|-140<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|dBc/Hz<br>~~a~~<br>~~a~~|
|||10MHz of Carrier<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|-149<br>~~a~~<br>~~a~~|~~a~~<br>~~a~~|dBc/Hz<br>~~a~~<br>~~a~~|
|Output Frequency (Standards)|FOUT|10MHz, 12MHz, 12.288MHz, 16MHz, 20MHz, 24MHz, 24.576MHz, 25MHz,<br>33.333MHz, 40MHz, 48MHZ, 50MHz, 100MHz, 125MHz, 156.25MHz<br>(Contact IDT for additional frequencies)|||||



Note: Inclusive of initial frequency accuracy, operating temperature range, supply variation, load variation, 3 times solder reflow, shock, vibration and 1 year aging at 25°C. We do not recommend hand soldering the devices 

IDT XO HCMOS CRYSTAL OSCILLATOR 

JUNE 20, 2017 

4 

XLH   DATASHEET 

## **Output Waveform** 

## **Typical Phase Noise (3.3V)** 

5 IDT XO HCMOS CRYSTAL OSCILLATOR 

JUNE 20, 2017 

XLH  DATASHEET 

## **IDT Ordering Information** 

||**XL**||||**L**|**L**||**5**|**5**|||**3**|**3**||**5**|**125.000000**<br>**I**||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||Family and ASIC|||Output Type||||Package||||Voltage|||Precision|Frequency<br>Temperature Range||
|||||||||||||||||||
|||||||||||||||||||
|||||||||||||**1:**1.8 VDC ±5%<br>**2:**2.5 VDC ±5%<br>**3:**3.3 VDC ±5%<br>=||||**I:**Industrial range  ‐40 to +85 °C<br>**K:**Extended industrial range ‐40 to +105 °C<br>**X:**Extended commercial range ‐20 to +70 °C<br>ee||
|**3:**3.2 x 2.5 mm<br>**5:**5.0 x 3.2 mm<br>**7:**7.0 x 5.0 mm<br>**H:** HCMOS Enable/Disable Pin 1<br>**J:**HCMOS Enable/Disable Pin 2<br>**L:**LVDS Enable/Disable Pin 1<br>**M:**LVDS Enable/Disable Pin 2<br>**P:**LVPECL Enable/Disable Pin 1<br>**Q:**LVPECL Enable/Disable Pin 2<br>**N:**HCSL Enable/Disable Pin 1<br>**O:**HCSL Enable/Disable Pin 2<br>**X:**XHCMOS Comp HCMOS Enable/Disable Pin 1<br>**Y:**XHCMOS Comp HCMOS Enable/Disable Pin 2<br>**XL:** 1,000fs jitter<br>**XU:**400fs jitter<br>] <br>—|||||||||||||||**V:**50 ppm APR (VCXO)<br>**125.000000 Listed in MHz as example**<br>**3 digits before decimal and 6 digits past decimal**<br>**000.016000 to 000.999999** 16.000kHz to 999.999kHz<br>**001.000000 to 009.999999** 1.000000MHz to 9.999999MHz<br>**010.000000 to 099.999999** 10.000000MHz to 99.999999MHz<br>**100.000000 to 999.999999** 100.000000MHz to 999.999999MHz<br>**A00.000000 to A99.999999** 1000.000000MHz to 1099.999999MHz<br>**B00.000000 to B99.999999**1100.000000MHz to 1199.999999MHz<br>**C00.000000 to C99.999999**1200.000000MHz to 1299.999999MHz<br>**D00.000000 to D99.999999** 1300.000000MHz to 1399.999999MHz<br>**E00.000000  to E99.999999** 1400.000000MHz to 1499.999999MHz<br>**F00.000000**1500.000000MHz<br> oe|||
|||||||||||||||||**0:**±100 ppm||
|||||||||||||||||**5:**±50 ppm||
|||||||||||||||||**6:**±25 ppm||
|||||||||||||||||**8:**±20 ppm||



IDT XO HCMOS CRYSTAL OSCILLATOR 

JUNE 20, 2017 

12 

## **Revision History** 

|**Date**|**Originator**|**Description of Change**|
|---|---|---|
|10/01/14|B. Chandhoke|1. Corrected typo in spec for Enable/Disable Low Voltage; from><br>30%VDD to<<br>30%VDD.<br>2. Moved from Advance to Preliminary.|
|12/10/14|B. Chandhoke|1. Added 7 x 5 x 1.3mm JU4 and 3.2 x 2.5 x 1.0mm JX4 package options and package dimension/landing<br>pattern drawings.<br>2. Updated ordering information table/graphic to show added package options.|
|10/28/16|P. Jenkins|Update ordering information decoder tables by separating them into Scheme 1 and Scheme 2; add note to<br>distinguish the two tables.|
|06/13/17|L.S.|Removed “Ordering Information Scheme #1 (for reference only)”. Replaced with a single ordering information<br>table.|
|06/20/17|L.S.|Corrected frequency errors in Ordering Information table.|



**Corporate Headquarters Sales Tech Support** 6024 Silver Creek Valley Road 1-800-345-7015 or 408-284-8200 www.idt.com/go/support San Jose, CA 95138 USA Fax: 408-284-2775 www.IDT.com www.IDT.com/go/sales 

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. 

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. 

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved. 

©2017 Integrated Device Technology, Inc. 

XLH   JUNE 20, 2017 

13