Image not available
Illustrative purposes only
XLC-25-H
LED Driver, LED Lighting, 25 W, 54 V, 1.05 A, Constant Power, 110 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- SVHC: No SVHC (25-Jun-2025)
- Product Range: XLC-25 Series
- Output Current: 1.05A
- LED Driver Mode: Constant Power
- Output Power Max: 25W
- Input Voltage Max: 305V
- Input Voltage Min: 110V
- Output Voltage Max: 54V
- Power Supply Applications: LED Lighting
| Delivery and price | |
|---|---|
| Units per pack | 250 |
| Price | 11.89 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver **==> picture [60 x 133] intentionally omitted <==** **----- Start of picture text -----**<br> User’s Manual<br>F<br>ope cl<br> a pe! T=<br>ype<br>LISTED<br>CLASS P LED DRIVER<br>4HB3<br>E334687<br>**----- End of picture text -----**<br> 2 ~~am~~ **(for XLC-25-S series)** QO) W WW **DC Input:176-280 VDC** (EL) Gl sev Ke @HICBCERK ■ Features • • Ke @HICBCERK **Note.11** @ We ■ • - • - I • - • - • - • • Standby power consumption <0.5W - • Meet emergency lighting (EL) application • Minimum dimming level 0.1% (DALI-2 DT6) ■ - - ■ - ℃ ~85 ℃ **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Constant Voltage LED Driver ## **SPECIFICATION** |**MODEL**<br>**OUTPUT**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**POWER FACTOR**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER TEMPERATURE**<br>**OVER VOLTAGE**<br>500ms, 100ms/230VAC, 1000ms, 100ms/115VAC<br>47 ~ 63Hz<br>0.35A / 115VAC 0.18A / 230VAC 0.15A/277VAC<br><0.75mA / 277VAC<br>20 ~ 90% RH non-condensing<br>-40 ~ +<br>, 10 ~ 95% RH<br>80℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>Shut down and latch off o/p voltage, re-power on to recover<br>**SHORT CIRCUIT**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**TOTAL HARMONIC**<br>**DISTORTION**<br>**RATED CURRENT**<br>**RATED POWER Note.2**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.5**<br>**RIPPLE & NOISE (max.) Note.3**<br>**VOLTAGE TOLERANCE Note.4**<br>**RATED VOLTAGE**<br>**OVER LOAD**<br>COLD START 10A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>71 units (circuit breaker of type B) / 71 units (circuit breaker of type C) at 230VAC<br>**MAX. CASE TEMP.**<br>Tcase=85℃<br>110 ~ 305VAC 141 ~ 400VDC<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>of ambient temperature.<br>℃<br>2. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>3. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.<br>4. Tolerance: includes set up tolerance, line regulation and load regulation.<br>5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>6.<br>strip<br>Flicker is measured at full load with LED<br>.<br>7. To fulfill requirement of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.<br>8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete<br>installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>9. The ambient temperature de-rating of 3.5<br>/1000m with fanless models and 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>℃<br>℃<br>10. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70<br>or less.<br>℃<br>11. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.<br>���������������������������������������������������������������������������������������������������������������������������<br>12. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.<br>13. For more information, please contact with MEAN WELL sales.<br>Product Liability Disclaimer: For detailed information, please refer to<br>※<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>105 ~ 180% rated output power<br>Hiccup mode,recovers automatically after fault condition is removed<br>Protection type:Hiccup mode, recovers automatically after fault condition is removed<br>THD<10%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<15%(@load<br>50%/115VAC)<br>≧<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>Tcase=-25 ~ 85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>**XLC-25-12-**<br>2.1A<br>120mVp-p<br>12V<br>25.2W<br>±4.0%<br>±0.5%<br>±2.0%<br>86%<br>13 ~ 16V<br>3949.8 K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>338.5 Khrs min. MIL-HDBK-217F (25<br>)<br>℃<br>147 40<br>*<br>*32mm,107*40*32mm (L*W*H)<br>141.6g;60pcs / 9.5Kg / .58CUFT(for blank type); 160g;50pcs / 9Kg /0.57CUFT(for S-type)<br>0<br>**SAFETY STANDARDS**<br>ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC);<br>BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004,<br>(<br>)<br>; approved<br>UL8750<br>; CSA C22.2 No. 250.13-12<br>;<br>Class P<br>Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13<br>**XLC-25-24-**<br>1.05A<br>24V<br>25.2W<br>26 ~ 32V<br>BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020<br>BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>50%); BS EN/EN61000-3-3; GB17625.1,<br>GB/T17743, EAC TP TC 020<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>Shut down output voltage,recovers automatically after fault condition is removed<br>**FLICKER Note.6**<br>PstLM<br>1, SVM<br>0.4<br>≤<br>≤<br>88%<br>PF<br>0.97/115VAC, PF<br>0.95/230VAC, PF<br>0.92/277VAC@full load<br>≧<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>240mVp-p|**MODEL**<br>**OUTPUT**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**POWER FACTOR**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER TEMPERATURE**<br>**OVER VOLTAGE**<br>500ms, 100ms/230VAC, 1000ms, 100ms/115VAC<br>47 ~ 63Hz<br>0.35A / 115VAC 0.18A / 230VAC 0.15A/277VAC<br><0.75mA / 277VAC<br>20 ~ 90% RH non-condensing<br>-40 ~ +<br>, 10 ~ 95% RH<br>80℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>Shut down and latch off o/p voltage, re-power on to recover<br>**SHORT CIRCUIT**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**TOTAL HARMONIC**<br>**DISTORTION**<br>**RATED CURRENT**<br>**RATED POWER Note.2**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.5**<br>**RIPPLE & NOISE (max.) Note.3**<br>**VOLTAGE TOLERANCE Note.4**<br>**RATED VOLTAGE**<br>**OVER LOAD**<br>COLD START 10A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>71 units (circuit breaker of type B) / 71 units (circuit breaker of type C) at 230VAC<br>**MAX. CASE TEMP.**<br>Tcase=85℃<br>110 ~ 305VAC 141 ~ 400VDC<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>of ambient temperature.<br>℃<br>2. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>3. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.<br>4. Tolerance: includes set up tolerance, line regulation and load regulation.<br>5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>6.<br>strip<br>Flicker is measured at full load with LED<br>.<br>7. To fulfill requirement of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.<br>8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete<br>installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>9. The ambient temperature de-rating of 3.5<br>/1000m with fanless models and 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>℃<br>℃<br>10. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70<br>or less.<br>℃<br>11. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.<br>���������������������������������������������������������������������������������������������������������������������������<br>12. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.<br>13. For more information, please contact with MEAN WELL sales.<br>Product Liability Disclaimer: For detailed information, please refer to<br>※<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>105 ~ 180% rated output power<br>Hiccup mode,recovers automatically after fault condition is removed<br>Protection type:Hiccup mode, recovers automatically after fault condition is removed<br>THD<10%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<15%(@load<br>50%/115VAC)<br>≧<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>Tcase=-25 ~ 85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>**XLC-25-12-**<br>2.1A<br>120mVp-p<br>12V<br>25.2W<br>±4.0%<br>±0.5%<br>±2.0%<br>86%<br>13 ~ 16V<br>3949.8 K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>338.5 Khrs min. MIL-HDBK-217F (25<br>)<br>℃<br>147 40<br>*<br>*32mm,107*40*32mm (L*W*H)<br>141.6g;60pcs / 9.5Kg / .58CUFT(for blank type); 160g;50pcs / 9Kg /0.57CUFT(for S-type)<br>0<br>**SAFETY STANDARDS**<br>ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC);<br>BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004,<br>(<br>)<br>; approved<br>UL8750<br>; CSA C22.2 No. 250.13-12<br>;<br>Class P<br>Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13<br>**XLC-25-24-**<br>1.05A<br>24V<br>25.2W<br>26 ~ 32V<br>BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020<br>BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>50%); BS EN/EN61000-3-3; GB17625.1,<br>GB/T17743, EAC TP TC 020<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>Shut down output voltage,recovers automatically after fault condition is removed<br>**FLICKER Note.6**<br>PstLM<br>1, SVM<br>0.4<br>≤<br>≤<br>88%<br>PF<br>0.97/115VAC, PF<br>0.95/230VAC, PF<br>0.92/277VAC@full load<br>≧<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>240mVp-p|**XLC-25-12-**|**XLC-25-24-**| |---|---|---|---| |||12V|24V| ||**RATED CURRENT**|2.1A|1.05A| ||**RATED POWER Note.2**|25.2W|25.2W| ||**RIPPLE & NOISE (max.) Note.3**|120mVp-p|240mVp-p| ||**VOLTAGE TOLERANCE Note.4**|±4.0%|| ||**LINE REGULATION**|±0.5%|| ||**LOAD REGULATION**|±2.0%|| ||**SETUP, RISE TIME**<br>**Note.5**|500ms, 100ms/230VAC, 1000ms, 100ms/115VAC|| ||**VOLTAGE RANGE**|110 ~ 305VAC 141 ~ 400VDC|| ||**FREQUENCY RANGE**|47 ~ 63Hz|| ||**POWER FACTOR**|PF<br>0.97/115VAC, PF<br>0.95/230VAC, PF<br>0.92/277VAC@full load<br>≧<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)|| ||**TOTAL HARMONIC**<br>**DISTORTION**|THD<10%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<15%(@load<br>50%/115VAC)<br>≧<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)|| ||**EFFICIENCY (Typ.)**|86%|88%| ||**AC CURRENT**|0.35A / 115VAC 0.18A / 230VAC 0.15A/277VAC|| ||**INRUSH CURRENT(Typ.)**|COLD START 10A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410|| ||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**|71 units (circuit breaker of type B) / 71 units (circuit breaker of type C) at 230VAC|| ||**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**OVER VOLTAGE**<br>**SHORT CIRCUIT**<br>**OVER LOAD**|<0.75mA / 277VAC|| |||105 ~ 180% rated output power|| |||Hiccup mode,recovers automatically after fault condition is removed<br>Protection type:Hiccup mode, recovers automatically after fault condition is removed<br>13 ~ 16V<br>26 ~ 32V|| |||Shut down and latch off o/p voltage, re-power on to recover|| |||Shut down output voltage,recovers automatically after fault condition is removed|| ||**WORKING TEMP.**|Tcase=-25 ~ 85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃|| ||**MAX. CASE TEMP.**|Tcase=85℃|| ||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing|| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +<br>, 10 ~ 95% RH<br>80℃|| ||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)|| ||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes|| ||**SAFETY STANDARDS**|ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC);<br>BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004,<br>(<br>)<br>; approved<br>UL8750<br>; CSA C22.2 No. 250.13-12<br>;<br>Class P<br>Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13|| ||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC|| ||**ISOLATION RESISTANCE**|I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃|| ||**EMC EMISSION**|BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>50%); BS EN/EN61000-3-3; GB17625.1,<br>GB/T17743, EAC TP TC 020|| ||**EMC IMMUNITY**|BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020|| ||**FLICKER Note.6**|PstLM<br>1, SVM<br>0.4<br>≤<br>≤|| ||**MTBF**|3949.8 K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>338.5 Khrs min. MIL-HDBK-217F (25<br>)<br>℃|| ||**DIMENSION**|147 40<br>*<br>*32mm,107*40*32mm (L*W*H)|| ||**PACKING**|141.6g;60pcs / 9.5Kg / .58CUFT(for blank type); 160g;50pcs / 9Kg /0.57CUFT(for S-type)<br>0|| ||1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>of ambient temperature.<br>℃<br>2. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>3. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.<br>4. Tolerance: includes set up tolerance, line regulation and load regulation.<br>5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>6.<br>strip<br>Flicker is measured at full load with LED<br>.<br>7. To fulfill requirement of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.<br>8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete<br>installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>9. The ambient temperature de-rating of 3.5<br>/1000m with fanless models and 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>℃<br>℃<br>10. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70<br>or less.<br>℃<br>11. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.<br>���������������������������������������������������������������������������������������������������������������������������<br>12. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.<br>13. For more information, please contact with MEAN WELL sales.<br>Product Liability Disclaimer: For detailed information, please refer to<br>※<br>https://www.meanwell.com/serviceDisclaimer.aspx||| _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power LED Driver ## **SPECIFICATION** |**MODEL**<br>**OUTPUT**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**POWER FACTOR**<br>**EFFICIENCY (Typ.) Note.7**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER TEMPERATURE**<br>500ms, 100ms/230VAC, 1000ms, 100ms/115VAC<br>47 ~ 63Hz<br>0.35A / 115VAC 0.18A / 230VAC 0.15A/277VAC<br><0.75mA / 277VAC<br>20 ~ 90% RH non-condensing<br>-40 ~ +<br>, 10 ~ 95% RH<br>80℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>DA2 type: Stage 1: De-ratingto 75% loading; Stage 2: De-ratingto 50% loading. Recovers automaticallyafter fault condition is removed.<br>**SHORT CIRCUIT**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**TOTAL HARMONIC DISTORTION**<br>**OPEN CIRCUIT**<br>**VOLTAGE Note.2**<br>**DEFAULT CURRENT**<br>**CONSTANT CURRENT**<br>**REGION Note.3**<br>**DIMMING RANGE**<br>**SETUP, RISE TIME**<br>**Note.5,6**<br>**RATED POWER Note.4**<br>**CURRENT RIPPLE**<br>**CURRENT ADJ.RANGE**<br>**(BY DIP SWITCH OR NFC)**<br>COLD START 10A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>71 units (circuit breaker of type B) / 71 units (circuit breaker of type C) at 230VAC<br>**MAX. CASE TEMP.**<br>Tcase=85℃<br>110~ 305VAC 141 ~ 400VDC<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>of ambient temperature.<br>℃<br>2. Output hiccups under no-load condition.<br>3. Please refer to “DRIVER METHODS OF LED MODULE”.<br>4. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>6. Based on IEC 62386-101/102 DALI power on timing and interruption regulations, the set up time needs to test with a DALI controller w hich can support for DALI<br>power on function, otherwise the startup time will be higher than 0.5 second.<br>7. Efficiency is measured at 500mA/50V output set by dip-switch or NFC.<br>8. Standby power consumption is measured at 230VAC.<br>9.<br>modules<br>Flicker is measured at full load with LED<br>.<br>10. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete<br>installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>11. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.<br>���������������������������������������������������������������������������������������������������������������������������<br>12.<br>.<br>To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains<br>13. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70<br>or less.<br>℃<br>4 The ambient temperature de-rating of 3.5<br>/1000m with fanless models and 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>1 .<br>℃<br>℃<br>15. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.<br>16. For more information, please contact with MEAN WELL sales.<br>Product Liability Disclaimer: For detailed information, please refer to<br>※<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>Hiccup mode,recovers automatically after fault condition is removed<br>THD<10%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<15%(@load<br>50%/115VAC)<br>≧<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>Tcase=-25 ~ 85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>**XLC-25-H-**<br>60V<br>0.3~1.05A<br>25W<br>700mA<br>9~54V<br><4%<br>0~100%<br>88%<br>Blank & B type: De-rating to lowest output level. Recovers automatically after fault condition is removed.<br>147 40<br>*<br>*32mm,107*40*32mm (L*W*H)<br>**SAFETY STANDARDS**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**FLICKER Note.9**<br>PstLM<br>1, SVM<br>0.4<br>≤<br>≤<br>**STANDBY POWER**<br>**CONSUMPTION Note.8**<br>Standby power consumption<0.5W(Dimming off)<br>**DALI STANDARDS**<br>Comply with IEC62386-101,102,207<br>PF<br>0.97/115VAC, PF<br>0.95/230VAC, PF<br>0.92/277VAC@full load<br>≧<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>**CURRENT TOLERANCE**<br>±5%<br>3949.8 K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>338.5 Khrs min. MIL-HDBK-217F (25<br>)<br>℃<br>ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC);<br>BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004,<br>(<br>)<br>approved;<br>UL8750<br>; CSA C22.2 No. 250.13-12<br>Class P<br>Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13 ;<br>BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020<br>BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>50%); BS EN/EN61000-3-3; GB17625.1,<br>GB/T17743, EAC TP TC 020<br>141.6g;60pcs / 9.5Kg / .58CUFT(for blank type); 160g;50pcs / 9Kg /0.57CUFT(for S-type)<br>0|**MODEL**<br>**OUTPUT**<br>**VOLTAGE RANGE**<br>**FREQUENCY RANGE**<br>**POWER FACTOR**<br>**EFFICIENCY (Typ.) Note.7**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER TEMPERATURE**<br>500ms, 100ms/230VAC, 1000ms, 100ms/115VAC<br>47 ~ 63Hz<br>0.35A / 115VAC 0.18A / 230VAC 0.15A/277VAC<br><0.75mA / 277VAC<br>20 ~ 90% RH non-condensing<br>-40 ~ +<br>, 10 ~ 95% RH<br>80℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>DA2 type: Stage 1: De-ratingto 75% loading; Stage 2: De-ratingto 50% loading. Recovers automaticallyafter fault condition is removed.<br>**SHORT CIRCUIT**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**TOTAL HARMONIC DISTORTION**<br>**OPEN CIRCUIT**<br>**VOLTAGE Note.2**<br>**DEFAULT CURRENT**<br>**CONSTANT CURRENT**<br>**REGION Note.3**<br>**DIMMING RANGE**<br>**SETUP, RISE TIME**<br>**Note.5,6**<br>**RATED POWER Note.4**<br>**CURRENT RIPPLE**<br>**CURRENT ADJ.RANGE**<br>**(BY DIP SWITCH OR NFC)**<br>COLD START 10A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>71 units (circuit breaker of type B) / 71 units (circuit breaker of type C) at 230VAC<br>**MAX. CASE TEMP.**<br>Tcase=85℃<br>110~ 305VAC 141 ~ 400VDC<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>of ambient temperature.<br>℃<br>2. Output hiccups under no-load condition.<br>3. Please refer to “DRIVER METHODS OF LED MODULE”.<br>4. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>6. Based on IEC 62386-101/102 DALI power on timing and interruption regulations, the set up time needs to test with a DALI controller w hich can support for DALI<br>power on function, otherwise the startup time will be higher than 0.5 second.<br>7. Efficiency is measured at 500mA/50V output set by dip-switch or NFC.<br>8. Standby power consumption is measured at 230VAC.<br>9.<br>modules<br>Flicker is measured at full load with LED<br>.<br>10. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete<br>installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>11. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.<br>���������������������������������������������������������������������������������������������������������������������������<br>12.<br>.<br>To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains<br>13. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70<br>or less.<br>℃<br>4 The ambient temperature de-rating of 3.5<br>/1000m with fanless models and 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>1 .<br>℃<br>℃<br>15. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.<br>16. For more information, please contact with MEAN WELL sales.<br>Product Liability Disclaimer: For detailed information, please refer to<br>※<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>Hiccup mode,recovers automatically after fault condition is removed<br>THD<10%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<15%(@load<br>50%/115VAC)<br>≧<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)<br>Tcase=-25 ~ 85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>**XLC-25-H-**<br>60V<br>0.3~1.05A<br>25W<br>700mA<br>9~54V<br><4%<br>0~100%<br>88%<br>Blank & B type: De-rating to lowest output level. Recovers automatically after fault condition is removed.<br>147 40<br>*<br>*32mm,107*40*32mm (L*W*H)<br>**SAFETY STANDARDS**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**FLICKER Note.9**<br>PstLM<br>1, SVM<br>0.4<br>≤<br>≤<br>**STANDBY POWER**<br>**CONSUMPTION Note.8**<br>Standby power consumption<0.5W(Dimming off)<br>**DALI STANDARDS**<br>Comply with IEC62386-101,102,207<br>PF<br>0.97/115VAC, PF<br>0.95/230VAC, PF<br>0.92/277VAC@full load<br>≧<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>**CURRENT TOLERANCE**<br>±5%<br>3949.8 K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>338.5 Khrs min. MIL-HDBK-217F (25<br>)<br>℃<br>ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC);<br>BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004,<br>(<br>)<br>approved;<br>UL8750<br>; CSA C22.2 No. 250.13-12<br>Class P<br>Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13 ;<br>BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020<br>BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>50%); BS EN/EN61000-3-3; GB17625.1,<br>GB/T17743, EAC TP TC 020<br>141.6g;60pcs / 9.5Kg / .58CUFT(for blank type); 160g;50pcs / 9Kg /0.57CUFT(for S-type)<br>0|**XLC-25-H-**| |---|---|---| ||**OPEN CIRCUIT**<br>**VOLTAGE Note.2**|60V| ||**DEFAULT CURRENT**|700mA| ||**CURRENT ADJ.RANGE**<br>**(BY DIP SWITCH OR NFC)**|0.3~1.05A| ||**CONSTANT CURRENT**<br>**REGION Note.3**|9~54V| ||**RATED POWER Note.4**|25W| ||**CURRENT RIPPLE**|<4%| ||**CURRENT TOLERANCE**|±5%| ||**DIMMING RANGE**|0~100%| ||**SETUP, RISE TIME**<br>**Note.5,6**|500ms, 100ms/230VAC, 1000ms, 100ms/115VAC| ||**VOLTAGE RANGE**|110~ 305VAC 141 ~ 400VDC| ||**FREQUENCY RANGE**|47 ~ 63Hz| ||**POWER FACTOR**|PF<br>0.97/115VAC, PF<br>0.95/230VAC, PF<br>0.92/277VAC@full load<br>≧<br>≧<br>≧<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)| ||**TOTAL HARMONIC DISTORTION**|THD<10%(@load<br>50%/230VAC; @load<br>75%/277VAC), THD<15%(@load<br>50%/115VAC)<br>≧<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)| ||**EFFICIENCY (Typ.) Note.7**|88%| ||**AC CURRENT**|0.35A / 115VAC 0.18A / 230VAC 0.15A/277VAC| ||**INRUSH CURRENT(Typ.)**|COLD START 10A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410| ||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**|71 units (circuit breaker of type B) / 71 units (circuit breaker of type C) at 230VAC| ||**LEAKAGE CURRENT**|<0.75mA / 277VAC| ||**STANDBY POWER**<br>**CONSUMPTION Note.8**|Standby power consumption<0.5W(Dimming off)| ||**OVER TEMPERATURE**<br>**SHORT CIRCUIT**|Hiccup mode,recovers automatically after fault condition is removed| |||Blank & B type: De-rating to lowest output level. Recovers automatically after fault condition is removed.| |||DA2 type: Stage 1: De-ratingto 75% loading; Stage 2: De-ratingto 50% loading. Recovers automaticallyafter fault condition is removed.| ||**WORKING TEMP.**<br>**MAX. CASE TEMP.**|Tcase=-25 ~ 85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃| |||Tcase=85℃| ||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +<br>, 10 ~ 95% RH<br>80℃| ||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)| ||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes| ||**SAFETY STANDARDS**|ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC);<br>BS EN/EN62384 independent, GB19510.14, GB19510.1, EAC TP TC 004,<br>(<br>)<br>approved;<br>UL8750<br>; CSA C22.2 No. 250.13-12<br>Class P<br>Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13 ;| ||**DALI STANDARDS**|Comply with IEC62386-101,102,207| ||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC| ||**ISOLATION RESISTANCE**|I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃| ||**EMC EMISSION**|BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load>50%); BS EN/EN61000-3-3; GB17625.1,<br>GB/T17743, EAC TP TC 020| ||**EMC IMMUNITY**|BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 1KV),<br>EAC TP TC 020| ||**FLICKER Note.9**|PstLM<br>1, SVM<br>0.4<br>≤<br>≤| ||**MTBF**|3949.8 K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>338.5 Khrs min. MIL-HDBK-217F (25<br>)<br>℃| ||**DIMENSION**|147 40<br>*<br>*32mm,107*40*32mm (L*W*H)| ||**PACKING**<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>of ambient temperature.<br>℃<br>2. Output hiccups under no-load condition.<br>3. Please refer to “DRIVER METHODS OF LED MODULE”.<br>4. De-rating may be need under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.<br>6. Based on IEC 62386-101/102 DALI power on timing and interruption regulations, the set up time needs to test with a DALI controller w hich can support for DALI<br>power on function, otherwise the startup time will be higher than 0.5 second.<br>7. Efficiency is measured at 500mA/50V output set by dip-switch or NFC.<br>8. Standby power consumption is measured at 230VAC.<br>9.<br>modules<br>Flicker is measured at full load with LED<br>.<br>10. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete<br>installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)<br>11. For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1.<br>���������������������������������������������������������������������������������������������������������������������������<br>12.<br>.<br>To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains<br>13. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70<br>or less.<br>℃<br>4 The ambient temperature de-rating of 3.5<br>/1000m with fanless models and 5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>1 .<br>℃<br>℃<br>15. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.<br>16. For more information, please contact with MEAN WELL sales.<br>Product Liability Disclaimer: For detailed information, please refer to<br>※<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>141.6g;60pcs / 9.5Kg / .58CUFT(for blank type); 160g;50pcs / 9Kg /0.57CUFT(for S-type)<br>0|| _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver ## **BLOCK DIAGRAM** **==> picture [453 x 109] intentionally omitted <==** **----- Start of picture text -----**<br> EMI FILTER POWER RECTIFIERS +V<br>I/P & SWITCHING & DC to DC -V<br>RECTIFIERS FILTER<br>O.T.P. CURRENT & DA+/PUSH<br>VOLTAGE LIMIT DA-/N<br>DETECTION<br>PWM&PFC<br>O.L.P. CIRCUIT<br>CONTROL<br>**----- End of picture text -----**<br> ## **DRIVING METHODS OF LED MODULE** - - ※ ��������������� - **XLC-25-H** **==> picture [259 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> For 25W application<br>60V<br>55V 300mA, 54V 460mA, 54V<br>50V<br>45V<br>40V<br>700mA, 36V<br>35V<br>30V<br>1050mA, 24V<br>25V<br>20V<br>15V<br>10V<br>5V 300mA, 9V 1050mA, 9V<br>0V<br>200mA 400mA 600mA 800mA 1000mA 1200mA<br>**----- End of picture text -----**<br> ## **CONSTANT POWER TABLE** XLC-25-H is a multiple-stage constant power driver, selection of output current through DIP switch or NFC setting is exhibited below. |Vo|Io<br>DIP S.W|1|2|3| |---|---|---|---|---| |9~54V|300mA|----|----|----| |9~54V|350mA|----|----|ON| |9~54V|400mA|----|ON|----| |9~50V|500mA|----|ON|ON| |9~42V|600mA|ON|----|----| |9~36V|700mA(default)|ON|----|ON| |9~28V|900mA|ON|ON|----| |9~24V|1050mA|ON|ON|ON| Note: The operating voltage range which show on this table is recommend to use. _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver ## **NFC Function Description** 1. The output current of the NFC Mode LED driver can be adjusted using NFC via the mobile APP. Operation Instruction: - ●Compatible phone Install an NFC-compatible smart mobile device or phone with AndroidTM 4.1 or IOS12 updates. - ●Steps for setting output current via NFC 1. Download Meanwell APP on mobile device or mobile phone, and enable NFC function. 2. Check the NFC antenna position of the mobile phone please. 3. Enter Meanwell APP ->Top left menu –Installation Manual/APP->PowerNFC,approach the LED driver NFC sensing position and perform sensing. 4. APP displays the functional parameters, and the relevant parameters are modified as required. 5. Tap the APP write button and quickly move the phone antenna close to the NFC sensing position of the LED driver. 6. The write completes when the mobile phone displays"Success". **==> picture [483 x 275] intentionally omitted <==** **----- Start of picture text -----**<br> ※ APP Interface:<br>10:34 HO Leos ile 10:34 HOw 2m = fil<br>«K Power NFC cw < Power NFC 2)<br>Model name > —_ — > XL0-25-H-DA2-N Read<br>Adjustable Output ——»> Current Output CurrentLevel<br>Current | Current Setting+ [708 Jma Setting 708mA | <— _<br>NFC Setting GTIN<br>password<br>_) Address Accumulating Back<br>Device address<br>\~15<br>Factory setting td Default | Write<br>Setting to LED Driver<br>**----- End of picture text -----**<br> - •To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: MEAN WELL on Note. Current accuracy : the numerical error between the set current and the actual current is within 2%. _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver ## **DIMMING OPERATION** ## ◎ **B type** - ※ **3 in 1 dimming function** - •Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. - •Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. •Dimming source current from power supply: 100μA (typ.) **==> picture [443 x 486] intentionally omitted <==** **----- Start of picture text -----**<br> 100%<br>90%<br>80%<br>+<br>+V + 70%<br>60%<br>-<br>-V - 50%<br>DIM+ 40%<br>+<br>Additive Voltage 30%<br>- 20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to -V" 0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>100%<br>90%<br>80%<br>+<br>+V + 70%<br>60%<br>-<br>-V - 50%<br>DIM+ 40%<br>Additive PWM signal 30%<br>20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to -V" 0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>◎ Applying additive resistance: 0~100kΩ 100%<br>90%<br>+V + + 80%<br>70%<br>-<br>-V - 60%<br>DIM+ 50%<br>40%<br>Additive Resistance<br>30%<br>DIM- 20%<br>“DO NOT connect "DIM- to -V" 10%<br>0%<br>Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N<br>(N=driver quantity for synchronized dimming operation)<br>Dimming input: Additive resistance<br>Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< Iout<6%.<br>2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.<br>Output current (%)<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br> _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver ## **DIMMING OPERATION** **==> picture [465 x 122] intentionally omitted <==** **----- Start of picture text -----**<br> ◎ DA2 type (DALI-2 digital dimming function)<br>※ Input wiring diagram<br>XLC-25 XLC-25<br>AC/N AC/N AC/N AC/N<br>AC/L AC/L AC/L AC/L<br>Push Button DA+/PUSH DA+ DA+/PUSH<br>DA-/N DA- DA-/N<br>**----- End of picture text -----**<br> ## ※ **PUSH dimming (primary side)** - The factory default dimming level is at 100%. **•** If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver. **•** Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button. **•** The maximum length of the cable from the push button to the last driver is 20 meters. **Action Action duration Function Short Push** 0.1~1s Turn ON-OFF the driver **Double Click** Click twice in 1.5s Set up the dimming level to 100% **Long Push** 1.5~10s Every Long Push changes the dimming direction, dimming up or down _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver ## **OUTPUT LOAD vs TEMPERATURE** **==> picture [220 x 300] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>80<br>230 VAC<br>60<br>110 VAC<br>40<br>20<br>-25 -15 0 15 30 40 50 60 70 (HORIZONTAL)<br>AMBIENT TEMPERATURE ,Ta ( ℃ )<br>STATIC CHARACTERISTIC<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>100 110 130 150 170 190 210 230 250 270 290 305<br>INPUT VOLTAGE (V) 60Hz<br>※De-rating is needed under low input voltage.<br>LOAD (%)<br>LOAD (%)<br>**----- End of picture text -----**<br> **==> picture [8 x 33] intentionally omitted <==** **----- Start of picture text -----**<br> LOAD (%)<br>**----- End of picture text -----**<br> **==> picture [203 x 135] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>80<br>60<br>40<br>20<br>-25 0 20 45 55 65 75 85 (HORIZONTAL)<br>Tcase ( ℃ )<br>**----- End of picture text -----**<br> ## **LIFE TIME** **==> picture [327 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>100<br>80<br>60<br>40<br>20<br>0<br>25 30 35 40 45 50 55 60 65 70 75 80 85 90<br>(Kh)<br>LIFETIME<br>**----- End of picture text -----**<br> **==> picture [49 x 9] intentionally omitted <==** **----- Start of picture text -----**<br> �����( )℃<br>**----- End of picture text -----**<br> _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver ## **TOTAL HARMONIC DISTORTION (THD)** **==> picture [491 x 612] intentionally omitted <==** **----- Start of picture text -----**<br> ※ XLC-25-H,Tcase at 75℃<br>12 12<br>10 10<br>8 8<br>115VAC 115VAC<br>6 230VAC 6 230VAC<br>277VAC 277VAC<br>4 4<br>2 2<br>0 0<br>50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>(700mA) (1050mA)<br>POWER FACTOR (PF) CHARACTERISTIC<br>※ XLC-25-H,Tcase at 75℃<br>1 1<br>0.98 0.98<br>0.96 0.96<br>0.94 0.94<br>0.92 0.92<br>0.9 115VAC 0.9 115VAC<br>230VAC 230VAC<br>0.88 0.88<br>277VAC 277VAC<br>0.86 0.86<br>0.84 0.84<br>0.82 0.82<br>0.8 0.8<br>50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>(700mA) (1050mA)<br>EFFICIENCY vs LOAD<br>XLC-25 series possess superior working efficiency that up to 88% can be reached in field applications.<br>※ XLC-25-H,Tcase at 75℃<br>90 90<br>85<br>85<br>80<br>80<br>75<br>75 70<br>115VAC 115VAC<br>70 230VAC 65 230VAC<br>277VAC 60 277VAC<br>65<br>55<br>60<br>50<br>55 45<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>LOAD LOAD<br>(700mA) (1050mA)<br>TBD TBD<br>TBD<br>TBD<br>TBD TBD<br>THD(%)<br>THD(%)<br>PF PF<br>EFFICIENCY (%) EFFICIENCY (%)<br>**----- End of picture text -----**<br> _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver **==> picture [500 x 620] intentionally omitted <==** **----- Start of picture text -----**<br> MECHANICAL SPECIFICATION (XLC-25 Built-in Type) Case No.XLC-25 Unit:mm<br>※ Blank type 107 mm<br>99 mm<br>2-ψ3.6<br>TB2 1 1<br>2<br>�� 50.5 mm<br>1 DIP-SWITCH<br>2 TB1 (only for H type)<br>( )<br>※Terminal Pin No. Assignment( TB1) ※ Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 AC/N 1 +V<br>2 AC/L 2 -V<br>※ ������<br>107 mm<br>1 1<br>2<br>TB2<br>3<br>�� 50.5 mm 4<br>1 DIP-SWITCH<br>2 TB1 (only for H type)<br>( )<br>※Terminal Pin No. Assignment( TB1) ※ Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 AC/N 1 +V<br>2 AC/L 2 -V<br>3 DIM+<br>4 DIM-<br>※ �������� 107 mm<br>※ Terminal Pin No. Assignment( TB1) TB2 21 ※ Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 AC/N �� 50.5 mm 1 +V<br>2 AC/L 1 DIP-SWITCH 2 -V<br>3 DA+/PUSH 2 (only for H type)<br>4 DA-/N 3 TB1<br>4 ( )<br>���������� ����������<br>8-9mm 8-9mm<br>����������� ( ) �����������<br>Item Order No. Quantity(MOQ/1Bag)<br>Strain-relief cap 1**3XLC-SET 50pcs (2pcs 1 set)<br>3<br>2<br>1<br>3<br>2<br>1<br>1 2 3<br>32 mm 40 mm<br>40 mm<br>40 mm<br>32 mm<br>14.6 mm<br>14.6 mm<br>14.6 mm<br>**----- End of picture text -----**<br> _File Name:XLC-25-SPEC 2024-03-21_ **XLC-25 series** 25W Multiple-Stage Constant Power/Constant Voltage LED Driver **==> picture [498 x 618] intentionally omitted <==** **----- Start of picture text -----**<br> MECHANICAL SPECIFICATION (XLC-25-S Independent Type) Case No.XLC-25-S Unit:mm<br>147 mm<br>※ ���������� 2-ψ3.6 99mm<br>1<br>TB2 2<br>�� 50.5 mm<br>1 DIP-SWITCH<br>TB1 (only for H type)<br>2<br>( )<br>※Terminal Pin No. Assignment( TB1) ※ Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 AC/N 1 +V<br>2 AC/L 2 -V<br>※ ������<br>147mm<br>1<br>2<br>TB2<br>3<br>�� 50.5 mm 4<br>1 DIP-SWITCH<br>TB1 (only for H type)<br>2<br>( )<br>※Terminal Pin No. Assignment( TB1) ※ Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 AC/N 1 +V<br>2 AC/L 2 -V<br>3 DIM+<br>4 DIM-<br>※ �������� 147 mm<br>1<br>TB2<br>2<br>�� 50.5 mm<br>DIP-SWITCH<br>1 (only for H type)<br>2 TB1<br>3<br>4 ( )<br>※Terminal Pin No. Assignment( TB1) ※ Terminal Pin No. Assignment(TB2)<br>Pin No. Assignment Pin No. Assignment<br>1 AC/N 1 +V<br>2 AC/L 2 -V<br>3 DA+/PUSH<br>4 DA-/N<br>���������� ����������<br>8-9mm<br>8-9mm<br>����������� ( ) ����������<br>3<br>2<br>1<br>3<br>2<br>1<br>1 2 3<br>32 mm<br>32mm<br>32mm<br>32mm<br>40 mm<br>40 mm<br>40 mm<br>31.5 mm<br>14.6 mm<br>14.6 mm<br>14.6 mm<br>**----- End of picture text -----**<br> **Installation Manual** Please refer to : http://www.meanwell.com/manual.html _File Name:XLC-25-SPEC 2024-03-21_
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →