Image not available
Illustrative purposes only
XDR-960E-24
AC/DC DIN Rail Power Supply (PSU), ITE, Industrial & Laboratory Equipment, 1 Output, 960 W, 24 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type:
- SVHC: No SVHC (25-Jun-2025)
- Product Range: XDR-960E Series
- No. of Outputs: 1 Output
- Output Power Max: 960W
- Current, Output 4: -
- Input Voltage VAC: 180V AC to 264V AC
- Power Supply Output Type: Fixed
- Output Current - Output 1: 40A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Voltage - Output 1: 24V
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE, Industrial & Laboratory Equipment
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 197.5 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** **==> picture [43 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> User’s Manual<br>**----- End of picture text -----**<br> **==> picture [494 x 412] intentionally omitted <==** **----- Start of picture text -----**<br> BauarSicherheitbeegelodwacmat geprufto ges g IS13252<br>www.ID 2000000000tuv.com THOMAS SAMUEL THOMAS SAMUEL<br>®<br>LISTED© BS EN/EN62368-1 4 CBB IEC62368-1 AS/NES61558-1 gy KC62368-1 &<br>UL61010 BS EN/EN61558-1BS EN/EN61010 IEC61558-1IEC61010 AS/NES62368-1 (By request) (By request)<br>© [FAL] [C €] om = | Automate JM industrial MM Security JAM Network JME Telecom<br>CNS15598-1 7 GB4943.1 [«)] @ iM TPTC004 CE Xk Se2O e n<br>(Applying)<br>■ Features ■ Applications<br>- 180~264Vac input with PFC * Industrial control system<br>- Global certificates in multi-fields * Semiconductor fabrication<br>(ITE 62368-1 , Industrial 61558-1/-2-16,61010) . Factory automation<br>* 96mm slim width - Electro-mechanical apparatus<br>•<br>: High efficiency up to 95.5% and no load power dissipation<3.6W Battery charger<br>* Built-in constant current limiting circuit<br>- Current sharing up to 3840W (3+1) for parallel use<br>- Protections: Short circuit / Overload / Over voltage<br>/ Over temperature<br>- Fanless design, cooling by free air convection ■ GTIN CODE<br>https://www.meanwell.com/serviceGTIN.aspx<br>- Over voltage category Ⅲ (OVC Ⅲ ) MW Seareh;<br>- -40~+70°C wide range operation temperature (>+50 ℃ derating)<br>- Operating altitude up to 5000 meters<br>* Built-in DC OK relay contact<br>- Can be installed on DIN rail TS-35/7.5 or 15<br>> 3 years warranty<br>■ Description<br>The XDR-960E series is a 960W AC/DC economical ultra slim industrial DIN rail power. Key<br>this series include a narrow 96mm casing, optimizing system installation space. It boasts a<br>efficiency of 95.5% and a low standby power consumption <3.6W for energy savings and<br>reduction. It has built-in constant current, fanless design, a wide operating temperature range of<br>℃ ℃<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> _File Name:XDR-960E-SPEC 2025-03-11_ 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** **SPECIFICATION** |**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**AC VOLTAGE RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>500ms, 50ms/230V<br>at full load<br>ac<br>15ms/230V<br>at full load<br>ac<br>180<br>ac<br>~ 264V<br>2.7W@ 230Vac<br>4 5<br>ac<br>. A/230V<br>COLD START 30A/230Vac<br>< . mA / 240V<br>3 5<br>ac<br>Protection type : Shut down o/p voltage, re-power on to recover<br>Protection type : Shut down o/p voltage, recovers automatically after temperature goes down<br>-40 ~ +70℃(Refer to "Derating Curve")<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>RH non-condensing<br>, 10 ~ 95%<br>℃<br>±<br>℃<br>℃<br>0.03% /<br>(0 ~ 50<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note )6**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.)**<br>**Note.2**<br>**VOLTAGE TOLERANCE**<br>**Note.3**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**FUNCTION**<br>**DC OK**<br>**TACT**<br>**RELAY CON**<br>Relay Contact Ratings (max.):30Vdc/1A, 30Vac/0.5Aresistive load<br>**PARALLEL(**<br>**)**<br>**Droop Mode**<br>Up to<br>units;Please refer to<br>3840W or (3+1)<br>Function Manual for more details<br>**POWDR FACTOR (Typ.)**<br>PF>0.95/230V<br>at full load<br>ac<br>**XDR-**<br>**0E-48**<br>**96**<br>±1.0%<br>±0.5%<br>±1.0%<br>20A<br>0 ~ 0A<br>2<br>960W<br>150mVp-p<br>48 ~ 55V<br>**XDR-**<br>**0E-36**<br>**96**<br>±1.0%<br>±0.5%<br>±1.0%<br>26 6. A<br>0 ~<br>. A<br>26 6<br>957 6. W<br>150mVp-p<br>36 ~ 42V<br>95. %<br>5<br>56 ~ 65V<br>95%<br>43 ~ 50V<br>I/P-O/P:<br>I/P-FG: 2KV<br>O/P-FG: 1.5KV<br>O/P-DC OK: 0.5KV<br>ac<br>ac<br>ac<br>4KVac<br>I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>**Parameter**<br>**Parameter**<br>ESD<br>Radiated<br>EFT / Burst<br>Surge<br>Conducted<br>Magnetic Field<br>Conducted<br>Radiated<br>Harmonic Current<br>Voltage Flicker<br>BS EN/EN55035 , BS EN/EN61204-3, BS EN/EN61000-6-2(BS EN/EN50082-2)<br>**Standard**<br>**Standard**<br>BS EN/EN55032 (CISPR32)/ BS EN/EN61204-3 / CNS15936<br>BS EN/EN55032 (CISPR32)/ BS EN/EN61204-3 / CNS15936<br>BS EN/EN61000-4-2<br>BS EN/EN61000-4-3<br>BS EN/EN61000-4-4<br>BS EN/EN61000-4-5<br>BS EN/EN61000-4-6<br>BS EN/EN61000-4-8<br>**Test Level / Note**<br>**Test Level / Note**<br>Level 3,<br>air ; Level 3,<br>contact; criteria A<br>8KV<br>4KV<br>Level 3, 10V/m ; criteria A<br>Level 2, 2KV ; criteria A<br>Level 4, 2KV/Line-Line ;Level 4, 4KV/Line-Line-Chassis ;criteria A<br>Level 3, 10V ; criteria A<br>Level 4, 30A/m ; criteria A<br>Class B<br>Class B<br>-----<br>BS EN/EN61000-3-2<br>BS EN/EN61000-3-2<br>Class A<br>**96*125.2*1**<br>**mm (W*H*D)**<br>**32**<br>Kg; pcs/Kg/CUFT<br>K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>K hrs min.<br>MIL-HDBK-217F (25<br>)<br>℃<br>**Note.4**<br>**XDR-**<br>**0E-24**<br>**96**<br>±1.0%<br>±0.5%<br>±1.0%<br>40A<br>0 ~ 0A<br>4<br>960W<br>120mVp-p<br>24 ~ 2 V<br>9<br>94.5%<br>30<br>4<br>~ 3 V<br>℃<br>μ<br>μ<br>F<br>F<br>℃<br>℃<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>**DC VOLTAGE RANGE**<br>254 5<br>dc<br>. ~ 370V<br>**FREQUENCY RANGE**<br>47 ~ 63Hz<br>Hiccup mode when output voltage <30%, recovers automatically after fault condition is removed<br>within 30%~100% rated output voltage, recovers automatically after fault condition is removed<br>Constant current limiting without shutdown<br>48V<br>36V<br>24V<br>UL61010;<br>BS EN/EN62368-1, BS EN/EN61558-1/-2-16,<br>/<br>; CB IEC62368-1, IEC61558-1,<br>;<br>TUV<br>BS EN EN61010<br>IEC61010<br>105~130% rated output power<br>**OVER VOLTAGE CATEGORY**<br>IEC/EN 61558-1/-2<br>(<br>altitude up to 000<br>)<br>-16<br>2<br>m<br>OVCⅢ,<br>IEC/EN/UL 6<br>(<br>altitude up to<br>)<br>1010<br>OVCⅡ,<br>5000m<br>IEC/EN 62368-1 (<br>altitude up to<br>)<br>OVCⅡ,<br>5<br>m<br>000<br>IEC/EN 61558-2<br>(<br>-16<br>SELV )<br>IEC/EN/UL 6<br>(<br>)<br>1010-2-201 SELV<br>IEC/EN 62368-1 (<br>)<br>SELV / ES1<br>**N**<br>**(Typ.)**<br>**O LOAD POWER CONSUMPTION**<br>3.6W@ 230Vac<br>**SAFETY EXTRA-LOW**<br>**VOLTAGE(SELV)**<br>EAC TPTC004 approved;KC KC62368-1<br>BIS IS13252 (Part 1):2010 certified no stock ,contact sale for inquires<br>and<br>,<br>RCM<br>AS/NZS 61558-1/-2-16; BSMI CNS1<br>-1; CCC GB4943.1;<br>5598<br>AS/NZS 62368-1,<br>~~eG~~<br>a<br>a~~CO~~<br>ne<br>Se<br>a<br>~~CC~~<br>~~GO~~<br>~~eG~~<br>Re<br>Ce~~RG~~<br>ee<br>a~~CO~~<br>a<br>Cea~~|~~Re<br>CO<br>a<br>—EeeeEeEeEeEEe————————————————————ee<br>Re<br>es<br>~~Re~~<br>es<br>a<br>a<br>a ~~ee~~<br>ae<br>Re<br>a<br>~~Ge~~<br>Cn<br>a a<br>eea<br>a<br>a<br>aea<br>a<br>a<br>aea<br>~~es~~<br>Cn<br>es<br>1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1<br>&47<br>parallel capacitor.<br>3. Tolerance: includes setuptolerance, line regulation and load regulation.<br>4. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives.<br>Product Liability Disclaimer<br>For detailed information, please refer to|**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**AC VOLTAGE RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>500ms, 50ms/230V<br>at full load<br>ac<br>15ms/230V<br>at full load<br>ac<br>180<br>ac<br>~ 264V<br>2.7W@ 230Vac<br>4 5<br>ac<br>. A/230V<br>COLD START 30A/230Vac<br>< . mA / 240V<br>3 5<br>ac<br>Protection type : Shut down o/p voltage, re-power on to recover<br>Protection type : Shut down o/p voltage, recovers automatically after temperature goes down<br>-40 ~ +70℃(Refer to "Derating Curve")<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>RH non-condensing<br>, 10 ~ 95%<br>℃<br>±<br>℃<br>℃<br>0.03% /<br>(0 ~ 50<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note )6**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.)**<br>**Note.2**<br>**VOLTAGE TOLERANCE**<br>**Note.3**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**FUNCTION**<br>**DC OK**<br>**TACT**<br>**RELAY CON**<br>Relay Contact Ratings (max.):30Vdc/1A, 30Vac/0.5Aresistive load<br>**PARALLEL(**<br>**)**<br>**Droop Mode**<br>Up to<br>units;Please refer to<br>3840W or (3+1)<br>Function Manual for more details<br>**POWDR FACTOR (Typ.)**<br>PF>0.95/230V<br>at full load<br>ac<br>**XDR-**<br>**0E-48**<br>**96**<br>±1.0%<br>±0.5%<br>±1.0%<br>20A<br>0 ~ 0A<br>2<br>960W<br>150mVp-p<br>48 ~ 55V<br>**XDR-**<br>**0E-36**<br>**96**<br>±1.0%<br>±0.5%<br>±1.0%<br>26 6. A<br>0 ~<br>. A<br>26 6<br>957 6. W<br>150mVp-p<br>36 ~ 42V<br>95. %<br>5<br>56 ~ 65V<br>95%<br>43 ~ 50V<br>I/P-O/P:<br>I/P-FG: 2KV<br>O/P-FG: 1.5KV<br>O/P-DC OK: 0.5KV<br>ac<br>ac<br>ac<br>4KVac<br>I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>**Parameter**<br>**Parameter**<br>ESD<br>Radiated<br>EFT / Burst<br>Surge<br>Conducted<br>Magnetic Field<br>Conducted<br>Radiated<br>Harmonic Current<br>Voltage Flicker<br>BS EN/EN55035 , BS EN/EN61204-3, BS EN/EN61000-6-2(BS EN/EN50082-2)<br>**Standard**<br>**Standard**<br>BS EN/EN55032 (CISPR32)/ BS EN/EN61204-3 / CNS15936<br>BS EN/EN55032 (CISPR32)/ BS EN/EN61204-3 / CNS15936<br>BS EN/EN61000-4-2<br>BS EN/EN61000-4-3<br>BS EN/EN61000-4-4<br>BS EN/EN61000-4-5<br>BS EN/EN61000-4-6<br>BS EN/EN61000-4-8<br>**Test Level / Note**<br>**Test Level / Note**<br>Level 3,<br>air ; Level 3,<br>contact; criteria A<br>8KV<br>4KV<br>Level 3, 10V/m ; criteria A<br>Level 2, 2KV ; criteria A<br>Level 4, 2KV/Line-Line ;Level 4, 4KV/Line-Line-Chassis ;criteria A<br>Level 3, 10V ; criteria A<br>Level 4, 30A/m ; criteria A<br>Class B<br>Class B<br>-----<br>BS EN/EN61000-3-2<br>BS EN/EN61000-3-2<br>Class A<br>**96*125.2*1**<br>**mm (W*H*D)**<br>**32**<br>Kg; pcs/Kg/CUFT<br>K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>K hrs min.<br>MIL-HDBK-217F (25<br>)<br>℃<br>**Note.4**<br>**XDR-**<br>**0E-24**<br>**96**<br>±1.0%<br>±0.5%<br>±1.0%<br>40A<br>0 ~ 0A<br>4<br>960W<br>120mVp-p<br>24 ~ 2 V<br>9<br>94.5%<br>30<br>4<br>~ 3 V<br>℃<br>μ<br>μ<br>F<br>F<br>℃<br>℃<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>**DC VOLTAGE RANGE**<br>254 5<br>dc<br>. ~ 370V<br>**FREQUENCY RANGE**<br>47 ~ 63Hz<br>Hiccup mode when output voltage <30%, recovers automatically after fault condition is removed<br>within 30%~100% rated output voltage, recovers automatically after fault condition is removed<br>Constant current limiting without shutdown<br>48V<br>36V<br>24V<br>UL61010;<br>BS EN/EN62368-1, BS EN/EN61558-1/-2-16,<br>/<br>; CB IEC62368-1, IEC61558-1,<br>;<br>TUV<br>BS EN EN61010<br>IEC61010<br>105~130% rated output power<br>**OVER VOLTAGE CATEGORY**<br>IEC/EN 61558-1/-2<br>(<br>altitude up to 000<br>)<br>-16<br>2<br>m<br>OVCⅢ,<br>IEC/EN/UL 6<br>(<br>altitude up to<br>)<br>1010<br>OVCⅡ,<br>5000m<br>IEC/EN 62368-1 (<br>altitude up to<br>)<br>OVCⅡ,<br>5<br>m<br>000<br>IEC/EN 61558-2<br>(<br>-16<br>SELV )<br>IEC/EN/UL 6<br>(<br>)<br>1010-2-201 SELV<br>IEC/EN 62368-1 (<br>)<br>SELV / ES1<br>**N**<br>**(Typ.)**<br>**O LOAD POWER CONSUMPTION**<br>3.6W@ 230Vac<br>**SAFETY EXTRA-LOW**<br>**VOLTAGE(SELV)**<br>EAC TPTC004 approved;KC KC62368-1<br>BIS IS13252 (Part 1):2010 certified no stock ,contact sale for inquires<br>and<br>,<br>RCM<br>AS/NZS 61558-1/-2-16; BSMI CNS1<br>-1; CCC GB4943.1;<br>5598<br>AS/NZS 62368-1,<br>~~eG~~<br>a<br>a~~CO~~<br>ne<br>Se<br>a<br>~~CC~~<br>~~GO~~<br>~~eG~~<br>Re<br>Ce~~RG~~<br>ee<br>a~~CO~~<br>a<br>Cea~~|~~Re<br>CO<br>a<br>—EeeeEeEeEeEEe————————————————————ee<br>Re<br>es<br>~~Re~~<br>es<br>a<br>a<br>a ~~ee~~<br>ae<br>Re<br>a<br>~~Ge~~<br>Cn<br>a a<br>eea<br>a<br>a<br>aea<br>a<br>a<br>aea<br>~~es~~<br>Cn<br>es<br>1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1<br>&47<br>parallel capacitor.<br>3. Tolerance: includes setuptolerance, line regulation and load regulation.<br>4. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives.<br>Product Liability Disclaimer<br>For detailed information, please refer to|**XDR-**<br>**0E-24**<br>**96**<br>~~eG~~|**XDR-**<br>**0E-24**<br>**96**<br>~~eG~~|**XDR-**<br>**0E-36**<br>**96**<br>~~eG~~|**XDR-**<br>**0E-36**<br>**96**<br>~~eG~~|**XDR-**<br>**0E-48**<br>**96**<br>~~eG~~|**XDR-**<br>**0E-48**<br>**96**<br>~~eG~~| |---|---|---|---|---|---|---|---| ||**DC VOLTAGE**<br>~~eG~~|24V<br>~~eG~~<br>a||36V<br>~~eG~~||48V<br>~~eG~~|| ||**RATED CURRENT**<br>a|40A<br>||26 6. A<br>||20A<br>|| ||**CURRENT RANGE**<br>a~~CO~~<br>ne|0 ~ 0A<br>4<br>~~CO~~||0 ~<br>. A<br>26 6<br>~~CO~~||0 ~ 0A<br>2<br>~~CO~~|| ||**RATED POWER**<br>ne<br>Se|960W||957 6. W||960W|| ||**RIPPLE & NOISE (max.)**<br>**Note.2**<br>ne<br>Se<br>a|120mVp-p||150mVp-p||150mVp-p|| ||**VOLTAGE ADJ. RANGE**<br>Se<br>a|24 ~ 2 V<br>9||36 ~ 42V||48 ~ 55V|| ||**VOLTAGE TOLERANCE**<br>**Note.3**<br>a<br>~~CC~~<br>~~GO~~|±1.0%<br>~~CC~~<br>~~GO~~||±1.0%<br>~~CC~~<br>~~GO~~||±1.0%<br>~~CC~~<br>~~GO~~|| ||**LINE REGULATION**<br>~~GO~~|±0.5%<br>~~GO~~||±0.5%<br>~~GO~~||±0.5%<br>~~GO~~|| ||**LOAD REGULATION**<br>~~GO~~<br>~~eG~~<br>Re|±1.0%<br>~~GO~~<br>~~eG~~||±1.0%<br>~~GO~~<br>~~eG~~||±1.0%<br>~~GO~~<br>~~eG~~|| ||**SETUP, RISE TIME**<br>Re<br>Ce|500ms, 50ms/230V<br>at full load<br>ac<br>|||||| ||**HOLD UP TIME (Typ.)**<br>Re<br>Ce|15ms/230V<br>at full load<br>ac<br>|||||| ||**AC VOLTAGE RANGE**<br>Ce~~RG~~<br>ee|180<br>ac<br>~ 264V<br>~~RG~~|||||| ||**DC VOLTAGE RANGE**<br>~~RG~~<br>ee|254 5<br>dc<br>. ~ 370V<br>~~RG~~|||||| ||**N**<br>**(Typ.)**<br>**O LOAD POWER CONSUMPTION**<br>ee<br>a|2.7W@ 230Vac<br>||3.6W@ 230Vac<br>|||| ||**FREQUENCY RANGE**<br>a|47 ~ 63Hz<br>|||||| ||**POWDR FACTOR (Typ.)**<br>|PF>0.95/230V<br>at full load<br>ac<br>|||||| ||**EFFICIENCY (Typ.)**<br>~~CO~~|94.5%<br>~~CO~~||95%<br>~~CO~~||95. %<br>5<br>~~CO~~|| ||**AC CURRENT (Typ.)**<br>a<br>Ce|4 5<br>ac<br>. A/230V<br>|||||| ||**INRUSH CURRENT (Typ.)**<br>a<br>Cea|COLD START 30A/230Vac<br>|||||| ||**LEAKAGE CURRENT**<br>Cea|< . mA / 240V<br>3 5<br>ac<br>|||||| ||**OVERLOAD**<br>a~~|~~Re|Hiccup mode when output voltage <30%, recovers automatically after fault condition is removed<br>within 30%~100% rated output voltage, recovers automatically after fault condition is removed<br>Constant current limiting without shutdown<br>105~130% rated output power<br>Re|||||| ||**OVER VOLTAGE**<br>~~|~~Re|Protection type : Shut down o/p voltage, re-power on to recover<br>56 ~ 65V<br>43 ~ 50V<br>30<br>4<br>~ 3 V<br>Re<br>CO|||||| ||**OVER TEMPERATURE**<br>a<br>—EeeeEeEeEeEEe————————————————————ee|Protection type : Shut down o/p voltage, recovers automatically after temperature goes down<br>—EeeeEeEeEeEEe————————————————————ee|||||| ||**PARALLEL(**<br>**)**<br>**Droop Mode**<br>a<br>—EeeeEeEeEeEEe————————————————————ee|Up to<br>units;Please refer to<br>3840W or (3+1)<br>Function Manual for more details<br>—EeeeEeEeEeEEe————————————————————ee|||||| ||**DC OK**<br>**TACT**<br>**RELAY CON**<br>—EeeeEeEeEeEEe————————————————————ee<br>Re|Relay Contact Ratings (max.):30Vdc/1A, 30Vac/0.5Aresistive load<br>—EeeeEeEeEeEEe————————————————————ee|||||| ||**WORKING TEMP.**<br>—EeeeEeEeEeEEe————————————————————ee<br>Re<br>es|-40 ~ +70℃(Refer to "Derating Curve")<br>—EeeeEeEeEeEEe————————————————————ee|||||| ||**WORKING HUMIDITY**<br>Re<br>es|20 ~ 95% RH non-condensing|||||| ||**STORAGE TEMP., HUMIDITY**<br>es<br>~~Re~~<br>es|-40 ~ +85<br>RH non-condensing<br>, 10 ~ 95%<br>℃<br>~~Re~~|||||| ||**TEMP. COEFFICIENT**<br>~~Re~~<br>es<br>a|±<br>℃<br>℃<br>0.03% /<br>(0 ~ 50<br>)<br>~~Re~~|||||| ||**VIBRATION**<br>es<br>a|Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6|||||| ||**SAFETY STANDARDS**<br>a|UL61010;<br>BS EN/EN62368-1, BS EN/EN61558-1/-2-16,<br>/<br>; CB IEC62368-1, IEC61558-1,<br>;<br>TUV<br>BS EN EN61010<br>IEC61010<br>EAC TPTC004 approved;KC KC62368-1<br>BIS IS13252 (Part 1):2010 certified no stock ,contact sale for inquires<br>and<br>,<br>RCM<br>AS/NZS 61558-1/-2-16; BSMI CNS1<br>-1; CCC GB4943.1;<br>5598<br>AS/NZS 62368-1,|||||| ||**Note.4**<br>**OVER VOLTAGE CATEGORY**|IEC/EN 61558-1/-2<br>(<br>altitude up to 000<br>)<br>-16<br>2<br>m<br>OVCⅢ,<br>IEC/EN/UL 6<br>(<br>altitude up to<br>)<br>1010<br>OVCⅡ,<br>5000m<br>IEC/EN 62368-1 (<br>altitude up to<br>)<br>OVCⅡ,<br>5<br>m<br>000|||||| ||**SAFETY EXTRA-LOW**<br>**VOLTAGE(SELV)**|IEC/EN 61558-2<br>(<br>-16<br>SELV )<br>IEC/EN/UL 6<br>(<br>)<br>1010-2-201 SELV<br>IEC/EN 62368-1 (<br>)<br>SELV / ES1|||||| ||**WITHSTAND VOLTAGE**<br>a|I/P-O/P:<br>I/P-FG: 2KV<br>O/P-FG: 1.5KV<br>O/P-DC OK: 0.5KV<br>ac<br>ac<br>ac<br>4KVac|||||| ||**ISOLATION RESISTANCE**<br>a|I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>|||||| ||**EMC IMMUNITY**<br>**EMC EMISSION**<br>a <br>Cn<br>Cn|**Parameter**<br> ~~ee~~<br>ae|**Standard**<br>~~ee~~||||**Test Level / Note**<br>~~ee~~| |||Conducted<br>ae<br>Re|BS EN/EN55032 (CISPR32)/ BS EN/EN61204-3 / CNS15936||||Class B| |||Radiated<br>ae<br>Re<br>a|BS EN/EN55032 (CISPR32)/ BS EN/EN61204-3 / CNS15936||||Class B| |||Harmonic Current<br>Re<br>a<br>~~Ge~~|BS EN/EN61000-3-2<br>~~Ge~~||||Class A<br>~~Ge~~| |||Voltage Flicker<br>~~Ge~~<br>Cn|BS EN/EN61000-3-2<br>~~Ge~~<br>Cn||||-----<br>~~Ge~~| |||BS EN/EN55035 , BS EN/EN61204-3, BS EN/EN61000-6-2(BS EN/EN50082-2)<br>Cn<br>aa|||||| |||**Parameter**<br>Cn<br>a <br>ee|**Standard**<br>Cn<br> a<br>a||**Test Level / Note**||| |||ESD<br>ee<br>a|BS EN/EN61000-4-2<br>a<br>a||Level 3,<br>air ; Level 3,<br>contact; criteria A<br>8KV<br>4KV||| |||Radiated<br>ee<br>a<br>ae|BS EN/EN61000-4-3<br>a<br>a<br>a||Level 3, 10V/m ; criteria A||| |||EFT / Burst<br>ae<br>a|BS EN/EN61000-4-4<br>a<br>a||Level 2, 2KV ; criteria A||| |||Surge<br>ae<br>a<br>ae|BS EN/EN61000-4-5<br>a<br>a<br>a||Level 4, 2KV/Line-Line ;Level 4, 4KV/Line-Line-Chassis ;criteria A||| |||Conducted<br>ae|BS EN/EN61000-4-6<br>a||Level 3, 10V ; criteria A||| |||Magnetic Field<br>ae<br>~~es~~|BS EN/EN61000-4-8<br>a<br>~~es~~||Level 4, 30A/m ; criteria A<br>~~es~~||| ||**MTBF**<br>Cn<br>es|K hrs min.<br>Telcordia SR-332 (Bellcore) ;<br>K hrs min.<br>MIL-HDBK-217F (25<br>)<br>℃<br>~~es~~|||||| ||**DIMENSION**<br>Cn<br>es|**96*125.2*1**<br>**mm (W*H*D)**<br>**32**<br>~~es~~|||||| ||**PACKING**<br>es|Kg; pcs/Kg/CUFT|||||| ||℃<br>μ<br>μ<br>F<br>F<br>℃<br>℃<br>(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>1. All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1<br>&47<br>parallel capacitor.<br>3. Tolerance: includes setuptolerance, line regulation and load regulation.<br>4. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives.<br>Product Liability Disclaimer<br>For detailed information, please refer to||||||| EMC directives. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) ※ Product Liability Disclaimer ： For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx _File Name:XDR-960E-SPEC 2025-03-11_ 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** ## **Block Diagram** **==> picture [465 x 607] intentionally omitted <==** **----- Start of picture text -----**<br> PFCfosc: 65KHz<br>PWM fosc : 60KHz<br>I/P FILTEREMI RECTIFIERS& PFC SWITCHINGPOWER RECTIFIERSFILTER& +Vo-Vo<br>O.C.P.<br>PFC<br>CONTROL DETECTION<br>FG O.L.P. PWM CIRCUIT<br>CONTROL<br>O.T.P.<br>O.V.P.<br>CURRENTSHARING PLINK<br>AUX<br>RELAY<br>POWER DC OK<br>CONTROL<br>Derating Curve<br>100<br>80<br>70<br>50<br>-40 -30 0 10 20 30 40 50 60 70 (VERTICAL)<br>AMBIENTTEMPERATURE( ℃ )<br>Static Characteristics<br>100<br>90<br>85<br>80<br>70<br>60<br>50<br>40<br>180 200 220 240 264<br>INPUT VOLTAGE (V) 60Hz<br>LOAD (%)<br>LOAD (%)<br>**----- End of picture text -----**<br> _File Name:XDR-960E-SPEC 2025-03-11_ 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** ## **Function Manual** **==> picture [356 x 248] intentionally omitted <==** **----- Start of picture text -----**<br> Pin No. Function Description<br>Contact Close: PSU turns ON/DC_OK<br>1,2 DC OK Relay Contact<br>Contact Open: PSU turns OFF/DC_fail<br>3,4 Paraller Use Link(PLINK) PLINK should be short to enable droop parallel use.(Default disable)<br>1.DC OK Relay Contact<br>Contact Close PSU turns ON / DC OK.<br>Contact Open PSU turns OFF / DC Fail.<br>Contact Ratings (max.) 30Vdc/1A, 30Vac/0.5A resistive load.<br>oe 1<br>R<br>| | U External voltage source (U) and resistor (R)<br>| | | (The max. Sink is 30Vdc/1A ,30Vac 0 5A/ . )<br>Li<br>es 2 ae<br>Internal circuit of DC_OK, via relay contact<br>**----- End of picture text -----**<br> ## **1.DC OK Relay Contact** ## **2.Parallel Use** XDR-960E has the built-in droop mode current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below : (1) Difference of output voltages among parallel units should be less than 0.1V. - (2) The total output current must not exceed the value determined by the following equation (Output current at parallel operation)=(The rated current per unit) x (Number of unit) x 0.9. (3) In parallel operation 4 units is the maximum, please consult the manufacture for other applications. - (4) The power supplies should be paralleled using short and large diameter wiring and then connected to the load. (5) When in parallel operation, the minimum output load should be greater than 7% of total output load. (Min. load >7% rated current per unit x number of unit) (6) In parallel connection, maybe only one unit (master) operate if the total output load is less than 7% of rated load condition. The other PSUs (slaves) may go into standby mode and their output LEDs & relays will not turn on. (7) PLINK lines should be shorted locally. - (8) The “Parallel Use” mode regulates the output voltage in such a manner that the voltage at no load is approx. 4% higher than at normal load. **==> picture [474 x 208] intentionally omitted <==** **----- Start of picture text -----**<br> For example XDR-960E-24:<br>No load output voltage=24V<br>Normal load output current=40A<br>0~100% load output voltage=24V~23V<br>+Vo +Vo 24V +Vo = 40A -Vo -VoStatus-Vo e 1 DC OK '<br>Vo Adj.<br>24 - 29Vdc<br>DC OK<br>25 Parallel Use PLINK<br>ac o<br>24 Typ. XDR-960E-24<br>23 je |<br>22 ig ‘4<br>200-240Vac<br>0 10 20 30 40 L N ® 3)<br>Output Current (A)<br>| i<br>Enable：PLINK should be short<br>)V<br>Output Voltage (<br>**----- End of picture text -----**<br> _File Name:XDR-960E-SPEC 2025-03-11_ 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** **==> picture [473 x 261] intentionally omitted <==** **----- Start of picture text -----**<br> + -<br>LOAD<br>+Vo<br>-Vo<br>1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6<br>+Vo+Vo +Vo -Vo -Vo -Vo +Vo+Vo +Vo -Vo -Vo -Vo +Vo+Vo +Vo -Vo -Vo -Vo +Vo+Vo +Vo -Vo -Vo -Vo<br>Status Status Status Status<br>Vo Adj. Vo Adj. Vo Adj. Vo Adj.<br>Parallel UseDC OK 1234 Parallel UseDC OK 1234 Parallel UseDC OK 1234 Parallel UseDC OK 1234<br>XDR - 960E XDR - 960E XDR - 960E XDR - 960E<br>PSU1 PSU2 PSU3 PSU4<br>200-240Vac 200-240Vac 200-240Vac 200-240Vac<br>L N L N L N L N<br>1 2 3 1 2 3 1 2 3 1 2 3<br>**----- End of picture text -----**<br> - ※ Please contact MEAN WELL for more details. _File Name:XDR-960E-SPEC 2025-03-11_ 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** **==> picture [488 x 476] intentionally omitted <==** **----- Start of picture text -----**<br> Mechanical Specification<br>(Unit:mm , Tolerance ±1mm) Case No. 304<br>A : Terminal Pin No.Assignment<br>Pin No. Assignment<br>1,2,3 DC Output +Vo<br>4,5,6 DC Output -Vo<br>B : Control Pin No.Assignment<br>Pin No. Assignment<br>1,2 DC OK Relay Contact<br>3 4, Parallel Use Link(Current Sharing)<br>96<br>1 2 3 4 5 6<br>A<br>+Vo+Vo +Vo -Vo -Vo -Vo<br>Status<br>Vo Adj.<br>Parallel UseDC OK 1243 B<br>200-240Vac<br>L N<br>C<br>1 2 3<br>C : Terminal Pin No.Assignment<br>Pin No. Assignment<br>1 AC/L or DC Input +Vin<br>2 AC/N or DC Input -Vin<br>3 FG<br>132<br>.<br>125 2<br>**----- End of picture text -----**<br> **==> picture [324 x 86] intentionally omitted <==** **----- Start of picture text -----**<br> Recommend Wiring<br>AC Input T.B DC Output T.B Signal connector<br>Solid Wire 6mm2 max. 6mm2 max. 1.5mm2 max.<br>A.W.G 18~10 AWG 18~8 AWG 24~16 AWG<br>Screw Terminal Torque 9 Lb-In 9 Lb-In /<br>**----- End of picture text -----**<br> _File Name:XDR-960E-SPEC 2025-03-11_ 960W AC DC Economical Ultra/ Slim Industrial DIN Rail Power **XDR-960E series** ## **Installation Instruction** **==> picture [463 x 113] intentionally omitted <==** **----- Start of picture text -----**<br> This series fits DIN rail TS35/7.5 or TS35/15.<br>For installation details, please refer to the Instruction manual.<br>ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15<br>(For reference only. Not included with unit.)<br>35<br>**----- End of picture text -----**<br> ## **InstallationManual** Pleasereferto:http://www.meanwell.com/manual.html _File Name:XDR-960E-SPEC 2025-03-11_
Updated at June 4, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →