X20AB1-16.000MHZ-T

## **X Series Crystal** 

## Ο **2mm X 2.5mm  4 Pads Ceramic Package** 

Ο **Ultra-miniature Profile** 

Ο **RoHS Compliant** 

## Ο **Tape and Reel Packaging** 

|Frequency Range|16.000MHZ to 60.000MHZ|
|---|---|
|Frequency Tolerance / Stability|(See Part Number Guide for Options)|
|Operating Temperature Range|(See Part Number Guide for Options)|
|Storage Temperature|-40°C to +85°C|
|Aging|±2ppm / per year|
|Shunt Capacitance|3pF Max|
|Load Capacitance|10pF Standard<br>(See Part Number Guide for Options)|
|Equivalent Series Resistance|See ESR Chart|
|Drive Level|100µW Max|
|Insulation Resistance|500 Megaohms Min at 100VDC|



## **Environmental & Mechanical Detail** 

## **Marking Detail** 

|Shock|MIL-STD-883, Method 2002 Cond B||First Line = MXX.X (not to exceed 5 characters)|First Line = MXX.X (not to exceed 5 characters)|First Line = MXX.X (not to exceed 5 characters)|
|---|---|---|---|---|---|
|||||||
|Solderability|MIL-STD-883, Method 2003||M|=|MMD|
|Solvent Resistance|MIL-STD-202, Method 215||XX.X|=|Device Frequency<br>(four digits including decimal|
||||||point)|
|Vibration|MIL-STD-883, Method 2007, Cond A|||||
|||||||
|Gross Leak Test|MIL-STD-883, Method 1014, Cond C||Second Line = SYWW (||Second Line = SYWW (not to exceed 5 characters)|
|Fine Leak Test|MIL-STD-883, Method 1014, Cond A||S|=|Internal Code|
|||||||
|MSL|Level 1 per IPC/JEDEC J-STD 20||YM|=|Date Code (Year/Month)|



**MMD MONITOR/QUARTZEK – An ILSI Company,** 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com 

. 

09/04/13 F 

Revision: 

Pg 1 of 2 

Specifications are subject to change without notice. 

## **ESR Chart** 

Frequency Range ESR (Ohms) Mode / Cut 16.000MHZ to 19.999MHZ 120 Max Fund / AT 20.000MHZ to 29.999MHZ 80 Max Fund / AT 30.000MHZ to 60.000MHZ 50 Max Fund / AT 

## **Part Number Guide** 

## **Mechanical Details** 

## **Tape & Reel** 

**==> picture [222 x 192] intentionally omitted <==**

**----- Start of picture text -----**<br>
PITCH<br>o o ° ‘Qo—-o eo ° °<br>16.00<br>Ee PaTLPa Ho.<br>oe C7<br>Q1 Q2 Q1 Q2 REEL DIA r \<br>Q3 Q4 Q3 Q4<br>_<br>1 x0,<br>eal DIRECTION OF FEED<br>NOTES:  UNLESS OTHERWISE SPECIFIED<br>TAPE WIDTHPITCH 8.00 [.315]4.00 [.157] 1. Applicable Standards / Specifications ANSI Y14.5MEIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm , Dimensions and Tolerances<br>PIN 1 ORIENT.REEL DIACOUNT 180 [7.0]1000Q1 2.4.3. Tolerances are ±0.1 [.004] mm unless otherwise specified. Punched Carrier Taping of Surface Mount Components for Automatic Handling. Dimensions are in millimeters [inch]. Do not scale drawing.<br>**----- End of picture text -----**<br>


## **MMD MONITOR/QUARTZEK – An ILSI Company,** 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com ~~a~~ 

. 

Revision: 

09/04/13 F 

Pg 2 of 2 

Specifications are subject to change without notice.