WP2001000-01G

## **WiPort Data Sheet** 

## **General Description** 

The WiPort™ is the most compact, integrated solution available to add 802.11b/g wireless networking to any device with a serial or wired Ethernet interface. Using this highly integrated hardware and software platform, you will add to your bottom line by significantly reducing product development time, risk, and cost. 

The WiPort offers the highest level of integration available in a device server.  Within a compact package is a DSTni™ x86 controller, memory, 802.11b/g radio, a 10/100 Ethernet transceiver, and dual high-speed serial ports. All of this combines to give you a complete networking solution.  The WiPort is designed with flexibility to support additional wireless standards without requiring redesign. 

To enable access to a local network or the Internet, the WiPort integrates a fully developed TCP/IP network stack and OS. The WiPort also includes an embedded web server that can be used to remotely configure, monitor, or troubleshoot the attached device. 

WiPort serves web pages to a web browser when there is a need to gather information or communicate with networked devices. The WiPort becomes a conduit between you and your device over the network or Internet. 

The Windows™-based configuration software, Device Installer™, simplifies installation and setup. The WiPort can also be configured locally through its serial port, or remotely over a network using Telnet (passwordprotected) or a web browser. Flash memory provides for maintenance-free, nonvolatile storage of web pages, and allows future system software upgrades. 

## **Hardware & Software Description** 

The WiPort functions independently of a PC, providing a complete hardware and software solution for adding wireless connectivity to your edge devices. Within a single package this powerful device server comes with an 802.11b wireless connection, a 10/100 Ethernet transceiver, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/IP protocol stack, and WEP security. 

## _**Key Features**_ 

- Complete integrated RoHS compliant solution 

- Supports 802.11 WLAN or Ethernet connectivity 

- Serial to 802.11b/g conversion 

- Wired Ethernet to  802.11 b/g WLAN Bridging 

- Stable, field proven TCP/IP protocol suite and webbased application framework 

- Optional End-to-End 128, 192 and 256 Bit AES Encryption 

- WPA PSK TKIP security, 128 bit WEP encryption 

- Dual serial ports 

- Easy configuration through a web interface 

- Easy installation of customized web pages 

- Embedded web server 

- 11 General Purpose Input/Output (GPIO) pins 

- E-mail alerts 

- Upgradeable firmware via the network or serial port 

- High performance data throughput 

The WiPort runs on a single  3.3V supply, and has a built-in voltage supervisory circuit. 

The WiPort will connect through a coaxial cable “pigtail” to a panel-mounted external antenna, which makes the electro-mechanical integration very simple. 

The WiPort software runs on a Lantronix DSTni controller which has 256 KB of internal SRAM, and 16 KB of boot ROM. The WiPort communicates to the edge device through a 3.3V logic level interface. 2 MB of flash memory is included for storing firmware and web pages. 

Copyright© 2006, Lantronix. All rights reserved. 

WiPort Data Sheet 

## **Protocol Support** 

The WiPort uses the widely accepted 802.11g protocol to connect to a wireless infrastructure or ad-hoc network, and is fully backward compatible with legacy 802.11b wireless networks.  It uses the Transmission Control Protocol (TCP) to assure that no data is lost or duplicated and that everything sent to the connection arrives correctly at the target. 

Other supported protocols are listed below: 

- ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for network communications. 

- IP for addressing, routing, and data block handling over the network. 

- User Datagram Protocol (UDP) for typical  datagram applications in which devices interact with other devices without maintaining a point-to-point connection. 

## **Dimensions** 

   - The WiPort dimensions are shown in the 

   - following  drawing: 

- TCP, UDP, and Telnet for connections to the  serial port. 

- TFTP for firmware updates. 

## **WiPort – Embedded Device Server** 

## (Note: Part #s on drawing are only representative) 

WiPort b/g Data Sheet – Rev 1.0 (March 2006) 

Page 2 of 7 

## **WiPort Pin Functionality** 

|**Pin Number**|**WiPort Pin Function**||**Pin Number**|**WiPort Pin Function **|
|---|---|---|---|---|
|1|3.3V Power||21|Reserved|
|2|3.3V Power||22|Reserved|
|3|RTS0||23|SignalGround|
|4|TXD0||24|SignalGround|
|5|RXD0||25|Reserved|
|6|ConfigurablePin 2||26|Reserved|
|7|ConfigurablePin3||27|Ethernet StatusLED2|
|8|CTS0||28|Ethernet StatusLED1|
|9|ConfigurablePin 10||29|EthernetTX-|
|10|ConfigurablePin8||30|EthernetTX+|
|11|SignalGround||31|EthernetRXCenter Tap|
|12|SignalGround||32|EthernetTXCenter Tap|
|13|ResetIn||33|EthernetRX-|
|14|ConfigurablePin0||34|EthernetRX+|
|15|RTS1||35|ConfigurablePin 1|
|16|TXD1||36|Reserved|
|17|RXD1||37|ConfigurablePin6|
|18|ConfigurablePin9||38|ConfigurablePin5|
|19|ConfigurablePin 4||39|WLAN ActivityLED|
|20|CTS1||40|Configurable Pin 7|



|**Mating Connector **|**Description **|
|---|---|
|Recommended: Samtec FTMH-120-03-F-DV-ES<br>(shrouded header)|The mating<br>connector is a 1mm<br>micro header,<br>40 pins, 2 x 20.|
|Alternative: Samtec FTMH-120-03-F-DV<br>(not shrouded)||
|Alternative:Oupiin 2411-2X20GDN/017(not shrouded)||



WiPort b/g Data Sheet – Rev 1.0 (March 2006) 

Page 3 of 7 

## **WiPort Wireless Specifications** 

|**Category**|**Category**|**Description**|
|---|---|---|
|NetworkStandards||IEEE802.11b ;IEEE802.11g|
|FrequencyRange||2.412 – 2.484GHz|
|Antenna Connector||1,no diversity supported.|
|Data Rates||1,2,5.5,11Mbps(802.11b)<br>6,9,12,18,24,36,48,54Mbps(802.11g)|
|Radio|Number of Selectable<br>Subchannels|Up to 14 channels. Profiles available will<br>include USA, France, Japan, Spain, Canda<br>and“Other”(multiple countries)|
||Modulations|OFDM, DSSS, DBPSK, DQPSK, CCK ,<br>16QAM, 64QAM|
||Antenna Connector|1|
|Security||WEP 64/128, WPA – PSK, TKIP, AES end-<br>to-end encryption|
|Maximum ReceiveLevel||-10 dBm(with PER< 8%)|
|Receiver Sensitivity||-72dBm for 54Mbps<br>-87 dBm for 11Mbps<br>-89 dBm for 5.5Mbps<br>-90 dBm for 2.0Mbps<br>-92dBm for 1.0Mbps|
|WLAN Power and Link LED<br>Current||Max: 4 mA|



WiPort b/g Data Sheet – Rev 1.0 (March 2006) 

Page 4 of 7 

## **WiPort Technical Data** 

|**Category**<br>~~as~~|**Description**|
|---|---|
|CPU, Memory<br>~~as~~|Lantronix DSTni-EX 186 CPU, 256 KB zero wait state on-chip SRAM,<br>2048KB Flash,16KB BootROM|
|Firmware<br>~~as~~<br>~~eel~~|Upgradeable via TFTP and serial port<br>~~eel~~|
|Reset Circuit<br>~~a~~<br>~~nn '~~|ResetIn islowactive. Minimum reset pulsewidth is2 ms atIIL = -500µA<br>~~'~~|
|Serial Interface<br>~~nn '~~|CMOS (Asynchronous) 3.3V-level signals<br>Rate is software selectable (300 bps to 921600 bps)<br>~~'~~|
|Serial LineFormats<br>~~nn '~~<br>~~a~~|7or8 data bits,1-2Stop bits,Parity:odd, even,none<br>~~'~~<br>~~a~~|
|Modem Control<br>~~|~~<br>~~ee~~|DTR, DCD<br>~~|~~|
|FlowControl<br>~~|~~<br>~~ee~~|XON/XOFF(software), CTS/RTS (hardware),none<br>~~|~~|
|Network Interface<br>~~ee~~<br>~~pf~~|Wireless 802.11b, 802.11g and 10/100 Ethernet<br>~~pf~~|
|Protocols Supported<br>~~a~~|ARP, UDP,TCP,Telnet,ICMP, SNMP,DHCP,BOOTP,AutoIP,HTTP, SMTP,TFTP|
|Media Access Control<br>~~a~~|CSMA/CA with ACK|
|FrequencyRange<br>~~a~~|2.412 – 2.484GHz|
|Range<br>~~a~~<br>~~a~~|Up to 328 feet (100m) indoors|
|Modulation<br>Techniques|OFDM<br>DSSS<br>CCK<br>DQPSK<br>DBPSK<br>64 QAM<br>16 QAM|
|Transmit Output Power<br>~~a~~|14 dBm + 1.5dBm/-1.0 dBm|
|Peak Supply Current<br>at 3.3V<br>~~a~~|650 mA|
|Management|Internal web server, SNMP (read only)<br>Serial login, Telnet login<br>DeviceInstaller software|
|Security<br>~~eee~~|Password protection,lockingfeatures, 64/128 bitWEP,WPA-PSK,End-to-EndAES<br>~~eee~~|
|Internal Web Server<br>~~a~~|Serves web pages<br>Storage capacity: 1.2 MB|
|Weight<br>~~a~~<br>~~eee~~|29 grams<br>~~eee~~|
|Material<br>~~a~~<br>~~nn '~~|Metal shell<br>~~'~~|
|Temperature<br>~~nn '~~|Operating range: -30°C to + 70°C (-22°F to 158°F)<br>Storagerange: -40°C to +85°C (-40°Fto185°F)<br>~~'~~|
|Warranty<br>~~nn '~~<br>~~a~~|2-year limited warranty<br>~~'~~|
|Included Software<br>~~a~~|Windows™ 98/NT/2000/XP based DeviceInstaller configuration software and Windows™<br>based Comm PortRedirector,DeviceInstaller,Web-Manager.|



## **Average Power Consumption at 3.3V** 

|**WLAN / Ethernet  Mode**|**High Performance(@ 88 MHz) /**<br>**Nominal Performance(@ 48 MHz)**|**Power Consumption**|
|---|---|---|
|WLAN mode|Highperformance, data transferat 922 kbps|1300mW|
|WLAN mode|Nominalperformance, data transferat230kbps|950mW|
|WLAN mode|High performance, no data transfer|580mW|
|WLAN mode|Nominalperformance,no data transfer|300mW|
|Ethernetmode*|Nominalperformance,no data transfer|750mW|



* Applicable only when the wired 802.3 interface is implemented and activated. 

WiPort b/g Data Sheet – Rev 1.0 (March 2006) 

Page 5 of 7 

|**Certifications (Please contact Lantronix for latest updates)**<br>**Description**<br>**Country**<br>**Certifications**<br>USA/Canada<br>U.S. and Canadian (Bi-National) Standard for Safety of<br>Information Technology Equipment, CSA-22.2 No.<br>60950-1-03 * UL 60950-1<br>Europe<br>(Pre-test scan only)<br>Standard for Safety of Information Technology<br>Equipment, EN 60950-1<br>Product<br>Safety<br>International<br>IEC 60950-1<br>~~==~~|**Certifications (Please contact Lantronix for latest updates)**<br>**Description**<br>**Country**<br>**Certifications**<br>USA/Canada<br>U.S. and Canadian (Bi-National) Standard for Safety of<br>Information Technology Equipment, CSA-22.2 No.<br>60950-1-03 * UL 60950-1<br>Europe<br>(Pre-test scan only)<br>Standard for Safety of Information Technology<br>Equipment, EN 60950-1<br>Product<br>Safety<br>International<br>IEC 60950-1<br>~~==~~|
|---|---|
|**Agency Compliance (Please contact Lantronix for latest updates)**<br>**Description**<br>**Country**<br>**Compliance**<br>USA<br>CFR Title 47 FCC Part 15-B, Class B<br>Europe<br>EN 300 328; Data Transmission Equipment Operating in<br>the 2.4GHz ISM Band and Using Spread Spectrum<br>Techniques<br>EN 301 489-17 & EN 301 489-1; EMC Standard for<br>Radio Equipment and Services<br>Electromagnetic<br>Compatibility<br>Canada<br>Industry Canada RSS-210 Low Power License-Exempt<br>Radiocommunication Devices<br>Australia /New<br>Zealand<br>AS/NZS CISPR 22  (EMC)<br>AS/NZS4771(Radio)<br>~~aaa~~||
|**DC Characteristics for Serial and Power Interface**<br>**Symbol**<br>**Parameter**<br>**Min**<br>**Nominal**<br>**Max**<br>**Units**<br>Vcc<br>Supply voltage (typical 3.3) (+/-2%)<br>3.135<br>3.3<br>3.45<br>V<br>VIL<br>Low Level InputVoltage<br>-0.3<br>0.8<br>V<br>VIH<br>High Level InputVoltage<br>2.0<br>5.5<br>V<br>VOL<br>Low Level Output Voltage<br>0.4<br>V<br>VOH<br>High LevelOutputVoltage<br>2.4<br>V<br>IL<br>InputLeakage Current<br>+/-0.01<br>+/-1<br>µA<br>~~—Tr~~||
|WiPort b/g Data Sheet – Rev 1.0 (March 2006)||



Page 6 of 7 

## **Evaluation Kit** 

## _**Introduction**_ 

A WiPort evaluation kit is available to provide a simple, quick and cost-effective way to evaluate the WiPort.  Use the development kit to connect the WiPort to your product design, and give your newly networked product a test drive. 

## _**Features of the Evaluation Kit**_ 

- Complete, ready-to-use WiPort and supporting Evaluation Board 

- 3.3V power supply 

- RS-232 cable, DB9F/F, null modem 

- CAT5e UTP RJ45M/M Ethernet cable 

- WiPort CD containing complete user documentation, DeviceInstaller, Comm Port Redirector (with 30 day free evaluation of Secure Comm Port Redirector) 

- Antenna 

## _**Features of the Evaluation Board**_ 

The WiPort evaluation board includes a WiPort integrated with the following features: 

- Ready to use – just plug in the WiPort and connect to your system 

- Dual high-speed RS-232 transceivers & DB9 

- connectors for easy connection to a PC 

- Complete Ethernet interface, including magnetics, 

- RJ-45 jack, and status LEDs 

- Test header for easy access to all 40 of the WiPort power & I/O pins 

## **Ordering Information** 

|**Model**|**Part Number**|**Description**|
|---|---|---|
|WiPort|WP2001000G-02|Standard WiPort B/G Bulk Pack<br>Min. order: 25 units|
|WiPort AES|WP2002000G-02|Standard WiPort B/G AES Bulk Pack<br>Min. order: 25 units|
|WiPort SMPL|WP200200SG-02|WiPort B/G AES, Sample<br>1 WiPort enclosed|
|WiPort Eval. Kit|WP200200KG-02|WiPort B/G AES Evaluation Kit|
|WiPort Antenna|930-033|Accessory Antenna|



For details contact your local Lantronix representative or Lantronix directly: **Asia Pacific Region** (E-mail): AsiaPacific_sales@lantronix.com **Europe** (E-mail): eu_sales@lantronix.com **Japan** (E-mail): japan_sales@lantronix.com **United States** (E-mail): sales@lantronix.com 

**Latin America & Caribbean** (E-mail): la_sales@lantronix.com or call OEM sales support at 800-526-8764. 

©2006 Lantronix, Inc. All rights reserved. Lantronix, WiPort and DSTni are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved.     910-440   3/2006 WiPort b/g Data Sheet – Rev 1.0 (March 2006) 

Page 7 of 7