WIO-B1R-RYG

||Drawing No.|Rev.|Page|
|---|---|---|---|
||WIO-B1T-W18|B|1/16|



## **SPECIFICATIONS** 

Product Name：Wireless Control Unit Transmitter／Receiver／Andon Kit Model : WIO-B1T／WIO-B1R(-RYG) WIO-B1S-001 

|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|2/16|



## **1. Product Overview** 

The signal input to the transmitter is sent to the reneiver via wireless nommunination using Bluetooth Low Energy (BLE), and nan operate the LED unit and buzzer unit nonnented to the reneiver, 

and nan operate externally nonnented Beanon and Audible Alarm. 

This donument desnribes the general spenifinations of the transmitter/reneiver and the funntional spenifinations of their nombination. 

## **2. Model** 

## 2.1. Model Number Configuration 

**==> picture [455 x 408] intentionally omitted <==**

**----- Start of picture text -----**<br>
－<br>Ｗ Ｉ Ｏ Ｂ １Ｔ<br>Trasmitter／Reneiver<br>T Transmitter<br>Wireless Type<br>Bluetooth Low Energy<br>B1<br>※Bluetooth ver5.0 LE Coded<br>－ －<br>Ｗ ＩＯ Ｂ１ Ｒ ＲＹＧ<br>LED Unit<br>(empty) LED Unit not innluded<br>RYG Red/Amber/Green LED Unit innluded<br>Trasmitter／Reneiver<br>T Transmitter<br>Wireless Type<br>Bluetooth Low Energy<br>B1<br>※Bluetooth ver5.0 LE Coded<br>－ －<br>Ｗ ＩＯ Ｂ１Ｓ ０ ０１<br>Type<br>Red/Amber/Green LED Unit and<br>001<br>AC Adapter (ADP-001C) Set<br>Trasmitter／Reneiver<br>S Transmitter and Reneiver<br>Wireless Type<br>Bluetooth Low Energy<br>B1<br>※Bluetooth ver5.0 LE Coded<br>**----- End of picture text -----**<br>


## 2.2. Model Number List 

Transmitter ： WIO-B1T Reneiver ： WIO-B1R／WIO-B1R-RYG Andon Kit (Transmitter and Reneiver) ： WIO-B1S-001 

|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|3/16|



## **3** ． **General Specifications** 

|3.1. Transmitter(WIO-B1T)|3.1. Transmitter(WIO-B1T)|3.1. Transmitter(WIO-B1T)|3.1. Transmitter(WIO-B1T)|||||
|---|---|---|---|---|---|---|---|
|Rated Voltage||||12 to 24 VDC(24 VDC when LED unit or buzzer unit is installed)||||
|OperatingVoltage Range||||10.8 to 26.4|VDC(21.6 to 26.4 VDC when LED unit or buzzer unit is installed)|||
|Rated Current<br>Consumption||||24V DC input|Main Unit||Maximum: 63mA or less|
||||||LED Unit||Maximum: 42mA or less(per tier)|
||||||Buzzer Unit||Maximum: 42mA or less|
|||||12V DC input|Main Unit||Maximum: 53mA or less|
|OperatingAmbient Temperature|||||-10°C to +50°C|||
|OperatingAmbient Humidity|||||85% RH or less,no freezing,no condensation|||
|Storage Ambient Temperature|||||-20°C to +60°C|||
||Storage Ambient Humidity||||85% RH or less,no freezing,no condensation|||
||MountingLocation||||Indoors|||
||MountingDirection||||Upright|||
||Protection Rating||||IP 65 (IEC 60529)、TYPE 4X,13(NEMA, UL50E)*1|||
||Environmental Conditions||||<br>Upright|||
||Insulation Resistance|||More than 5M Ω at 500 VDC between the livepart and non-current carryingmetallicpart||||
||Withstand Voltage|||500 VAC applied for 1 min between livepart and non-current carryingmetallicpart without breakinginsulation||||
||Mass(Tolerance:±10%)|||220g*Hexagon nut with flange(Accessory)not included||||
||Outer|Dimensions||Refer to the Outer Dimension Drawing||||
|Interfaces||Terminal Block<br>Connector<br>Power supply<br>Input<br>Output||Screwless Terminal Block(14 contacts)||||
|||||SupportedWire Diameter||Single wire: φ 0.5-1.2 mm, Stranded wire: 0.2-1.5 mm2(AWG24-16)||
||||Power supply|<br>12 to 24 VDC input(12 to 24 VDC,GND)||||
||||Input|Number of Contacts||7 contacts||
|||||Output ON current||10 mA or less(per contact)||
|||||Input Reaction Time||100 ms or longer||
||||Output|None||||
|||USB connector||USB 2.0(Type-C connector)*For maintenancepurposes only,do not use.||||
|DisplayUnit||||Status DisplayIndicator||||
|Lever||||GroupID DIP Switch,Function DIP Switch,Reset Button||||
|Accessories||||Hexagon nut with flange(M4)x 3||||
|Supported Unit<br>(Rated Voltage：DC24V only)||||LED Unit||LR6-E-□、LR6-E-□Z、LR6-E-MZ *Maximum number of 5 tiers for LED Units||
|||||Buzzer Unit||LR6-BW||
|Supported Option||||Wallmount Bracket||SZK-003W、SZK-001U*5||
|||||Pole*2||POLE22-□00AT、POLE22-□00AN||
|||||Circular bracket||SZP-001W*4、SZP-002U*4、SZP-003W*4、SZW-001W||
|||||FoldingBracket||SZQ-001W*4||
|||||L-bracket||SZL-001*3||
|||||MountingBracket||SZW-002W、SZW-003W||
|||||AC Adapter||ADP-001C||
|Remark||||*1 IP54 when SZP-003W is mounted on the product body<br>*2 Available only when SZP-003W is mounted<br>*3 Available only when POLE22-□00AT is mounted<br>*4 Available only when POLE22-□00AN is mounted<br>*5 Available only when POLE22-□00AT or POLE22-□00AN is mounted||||



|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|4/16|



|3.2 Receiver(WIO-B1R)|3.2 Receiver(WIO-B1R)|3.2 Receiver(WIO-B1R)|3.2 Receiver(WIO-B1R)|||||
|---|---|---|---|---|---|---|---|
|Rated Voltage||||12 to 24 VDC(24 VDC when LED unit or buzzer unit is installed)||||
|OperatingVoltage Range||||10.8 to 26.4|VDC(21.6 to 26.4 VDC when LED unit or buzzer unit is installed)|||
|Rated Current<br>Consumption||||24V DC input|Main Unit||Maximum: 52mA or less|
||||||LED Unit||Maximum: 42mA or less(per tier)|
||||||Buzzer Unit||Maximum: 42mA or less|
|||||12V DC input|Main Unit||Maximum: 79mA or less|
|OperatingAmbient 1emperature|||||-10°C to +50°C|||
|OperatingAmbient Humidity|||||85% RH or less,no freezing,no condensation|||
|Storage Ambient 1emperature|||||-20°C to +60°C|||
||Storage Ambient Humidity||||85% RH or less,no freezing,no condensation|||
||MountingLocation||||Indoors|||
||MountingDirection||||Upright|||
||Protection Rating||||IP 65 (IEC 60529)、1YPE 4X,13(NEMA, UL50E)*1|||
||Environmental Conditions||||<br>Upright|||
||Insulation Resistance|||More than 5M Ω at 500 VDC between the livepart and non-current carryingmetallicpart||||
||Withstand Voltage|||500 VAC applied for 1 min between livepart and non-current carryingmetallicpart without breakinginsulation||||
||Mass(1olerance:±10%)|||220g*Hexagon nut with flange(Accessory)not included||||
||Outer|Dimensions||||Refer to the Outer Dimension Drawing||
|Interfaces||Output<br>1erminal Block<br>Connector<br>Power supply<br>Input||||Screwless 1erminal Block(14 contacts)||
|||||SupportedWire Diameter||Single wire: φ 0.5-1.2 mm, Stranded wire: 0.2-1.5 mm2(AWG24-16)||
||||Power supply|||<br>12 to 24 VDC input(12 to 24 VDC,GND)||
||||Input|||1 contact(Clear Input)||
|||||Non-Voltage<br>Contact Output||5 contacts(COM terminal 1 contact)||
|||||||Maximum load voltage: 35 VDC,Maximum load current: 250 mA||
||||Output|Relay output<br>(Arbeit Contact)||1 contact||
|||||||Contact rating: 30 VDC 3.0 A *1,minimum applicable load: 10.8 VDC 10 mA||
|||||||Open/close life: 100,000 times or more *30 VDC 3.0 A resistive load||
|||USB connector||USB 2.0(1ype-C connector)*For maintenancepurposes only,do not use.||||
|DisplayUnit||||Status DisplayIndicator||||
|Lever||||GroupID DIP Switch,Function DIP Switch,Reset Button,Repeater SettingSwitch||||
|Accessories||||Hexagon nut with flange(M4)x 3||||
|Supported Unit<br>(Rated Voltage：DC24V only)||||LED Unit||LR6-E-□、LR6-E-□Z、LR6-E-MZ *Maximum number of 5 tiers for LED Units||
|||||Buzzer Unit||LR6-BW||
|Supported Option||||Wallmount Bracket||SZK-003W、SZK-001U*5||
|||||Pole*2||POLE22-□00A1、POLE22-□00AN||
|||||Circular bracket||SZP-001W*4、SZP-002U*4、SZP-003W*4、SZW-001W||
|||||FoldingBracket||SZQ-001W*4||
|||||L-bracket||SZL-001*3||
|||||MountingBracket||SZW-002W、SZW-003W||
|||||AC Adapter||ADP-001C||
|Remark||||*1 IP54 when SZP-003W is mounted on the product body<br>*2 Available only when SZP-003W is mounted<br>*3 Available only when POLE22-□00A1 is mounted<br>*4 Available only when POLE22-□00AN is mounted<br>*5 Available only when POLE22-□00A1 or POLE22-□00AN is mounted||||



|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|5/16|



## **4** ． **Wireless Communication Specifications** 

|Wireless Standard|Bluetooth 5.0(Bluetooth Low Energy)|
|---|---|
|Communication Frequency|2402MHz to 2480MHz|
|Communication Speed|125kbps(LE Coded) (Theoretical value)|
|Transmit Power|+8dBm|
|Communication Range|Line of sight, Approximately 100m (reference value) *6|
|Communication Configuration|<br>Transmitter：Receiver＝1：1|
|GroupID Setting|Upto 8groups can be set|
|Repeater Function|Possible(Onlyreceivers can be set,maximum of 3 units/1group)|
|Supported Countries<br>and Regions*7|Japan, U.S.A, Europe, United Kingdom, China, Canada, Singapore*8, Vietnam|
|Remark<br>|*7 Do not use outsides of supported countries and regions.<br> Failure to do so may come into conflict with the law.<br>*8 WIO-B1S-001 cannot be used.<br>*6 It depends on the installation location and communication<br> environment depending on the characteristics of the radio wave.|
|**5**．**Conformity Standards(Transmitter/Reciever)**||
|Conformity Standards|Bluetooth SIG certification<br>Japan Radio Law (ARIB STD-T66 Conformity)*9<br>UL 508 ,CAN/CSA C22.2 No.14-18<br>FCC Part 15 Subpart B Class A, FCC Part15 Subpart C*9<br>EN 62368-1, EN55032(Class A), EN 55035, EN 300328, EN 301 489-1<br>EN IEC 63000<br>MIIT (2021) No.129<br>RSS-247 Issue 2*9, ICES-003 Class A|
|Remark|・UL Recognized Component(File No.E215660)<br>・Conforms to the UKCA Requirements<br>・Conforms to the CE Requirements<br>*9 Built-in certified wireless module|



Drawing No. WIO-B1T- W 18 

|Rev.|Page|
|---|---|
|B|6/16|



## **6** ． **Outer Dimension Drawing** 

**==> picture [462 x 639] intentionally omitted <==**

**----- Start of picture text -----**<br>
(Unit：mmn<br>φ60 φ60<br>1 1<br>19 19<br>2<br>2<br>Cm. B<br>C) - =<br>3<br>3 [A: 4O=_—_—_=—S—<br>147<br>147<br>4<br>4<br>5 40 5 40<br>(12) 6 (12)<br>Transmitter Receiver<br>6<br>No Name Material<br>1 Head Cover PC(Off-Wihten<br>2 Top Case PC(Off-Wihten<br>3 Indicator PC(Clearn<br>4 Bottom Case PC(Off-Wihten<br>5 Direct Mount Bracket PC(Off-Wihten<br>6 Mounting Gasket Silicon Rubber<br>*Maximum Borad Thickness：7mm<br>Terminal Block Mounting Hole<br>Connector(14 contactsn Group ID Function DIP Switch<br>DIP Switch<br>an Waa<br>f/ fn \\\ GROUP) 7 ZA TONG. 1\}\ ; a NS<br>USB Connector (Type-Cn Reset Button Mounting Dimensional Drawing<br>Removed Direct Mount Bracket Removed Head Cover Repeater Setting Switch<br>(Transmitter／Receivern (Transmitter／Receivern (Receiver Onlyn<br>**----- End of picture text -----**<br>


|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|7/16|



## **7** ． **Wiring** 

7.1 Terminal Block Connector Pin Arrangement ①Transmitter 

|No|Item|
|---|---|
|1|Power supply*Connected internallywith No.8|
|2|Power supply (COM) *Connected internally with No.9 and 12|
|3|Input CH1 / LED Red|
|4|Input CH2 / LED Amber|
|5|Input CH3 / LED Green|
|6|Input CH4 / LED Blue|
|7|Input CH5 / LED White|
|8|Power supply*Connected internallywith No.1|
|9|Power supply (COM) *Connected internally with No.2 and 12|
|10|Input: CH6|
|11|Input: Buzzer|
|12|COM  Connected internallywith No.2 and 9|
|13|NC|
|14|Flashing COM *Operates only when the buzzer unit is installed|



## ②Receiver 

|No|Item|Item|
|---|---|---|
|1|Power supply1|*Connected internally with No.8|
|2|Power supply2|*Connected internally with No.9|
|3|Output: CH1|Non-Voltage Contact Output|
|4|Output: CH2||
|5|Output: CH3||
|6|Output: CH4||
|7|Output: CH5||
|8|Power supply1|*Connected internally with No.1|
|9|Power supply2|*Connected internally with No.2|
|10|COM(Output for CH1-5)|-|
|11|Clear Input +|Clear Input|
|12|Clear Input -||
|13|Output: CH6 +|Relay output|
|14|Output: CH6 -||



**==> picture [185 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Drawing No.|Rev.|Page|
|WIO-B1T-|W|18|B|
|8/16|

**----- End of picture text -----**<br>


7.2 Wiring for Transmitter ①Contact relay 

**==> picture [71 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
②NPN transistor<br>**----- End of picture text -----**<br>


Drawtng No. WIO-B1T- W 18 B 

Rev. Page B 9/16 

## ③PNP tranststor 

Drawing No. Rev. Page WIO-B1T- W 18 B 10/16 

## 7.3 Wiring for Receiver 

Drawing No. Rev. Page WIO-B1T- W 18 B 11/16 

## **8** ． **Functional Specification** 

## 8.1 Product Configuration 

This product consists of a transmitter and a receiver. 

Send signals from the transmitter to the receiver/repeater via Bluetooth to operate Beacon, Signal Tower, Audible Alarm, and so on connected to the receiver/repeater. 

If wireless quality is poor due to the installation location and signal conditions, the receiver can be used as a repeater for various conditions. 

## 8.2 Basic Operation 

The transmitter has 7 inputs and the receiver/repeater has 5 transistor outputs and 1 relay output. You can attach additional units (LED units and buzzer unit) to this product. This product works in conjunction with the following. 

- *Communication delays may occur depending on the distance between products, the number of repeaters, and the usage environment. 

|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|12/16|



## 8.3  Functional Specification List 

Operating Mode Select the operation mode from level mode/one shot mode. Input Logic Switching Select the logic of the transmitter contact input. Group ID Select the group ID for wireless communication. Wireless Repeater Select enable/disable of the receiver's repeat function. Check the status by checking the luminescent color and luminous pattern Status Display of the indicator on the main unit. 

## 8.4 Set Functions 

Functions can be selected depending on usage and installation environment. 

|・Transmitter|・Transmitter||||★：factory default|
|---|---|---|---|---|---|
||2<br>Swith No.<br>1|Operating Mode<br>Unpairing<br>Function Name|OFF<br>ON<br>OFF<br>ON|★<br>★|Disabled<br>Execute unpairing<br>Level Mode<br>One-shot Mode<br>Operation|
|・Receiver<br>3<br>Swith No.||Input logic switching<br>Function Name|OFF<br>ON|★|★：factory default<br>Input logic A<br>Input logic B<br>Operation|
||1|Unpairing|OFF<br>ON|★|Disabled<br>Execute unpairing|
||2|One-shot Mode<br>output time*|OFF<br>ON|★|Output for 12 seconds<br>Hold output|
||3|Not used|OFF<br>ON|★|-<br>-|



*This is valid only when the transmitting product is set to one-shot mode. 

## (1) Level Mode 

The ON/OFF output of the receiver or repeater can be linked to the ON/OFF input of the transmitter. 

Drawing No. Rev. Page WIO-B1T- W 18 B 13/16 

## (2) One Shot Mode 

This product can hold the output of the receiving product (hold output/output for 12 seconds) by pressing the ON input when the transmitting product is emitting the OFF input. The output continuous state can be canceled by the receiving product. 

## (3) Input Logic A/B Switching Setting 

Select for this product the logical sum of the transmitter product's ON/OFF input and the receiver product's ON/OFF output [Input Logic A (NO Contact)], and the inverse logic of the transmitter product's ON/OFF input and the receiver product's ON/OFF output [Input Logic B (NC Contact)]. 

Drawing No. Rev. Page WIO-B1T- W 18 B 14/16 ~~es ee~~ 

## 8.5 Group ID DIP Swituh 

**==> picture [330 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
Set when operating this produut with multiple group IDs.<br>This produut uan operate up to 8 groups in the same area.<br>Swituh Number<br>Group ID name<br>1 2 3<br>Group ID 1 OFF OFF OFF<br>Group ID 2 ON OFF OFF<br>Group ID 3 OFF ON OFF<br>Group ID 4 ON ON OFF<br>Group ID 5 OFF OFF ON<br>Group ID 6 ON OFF ON<br>Group ID 7 OFF ON ON<br>= Group ID 8 ON ON ON<br>**----- End of picture text -----**<br>


Drawing No. Rev. Page WIO-B1T- W 18 B 15/16 

## 8.6 Repeater Setting Switch 

If the wireless quality is poor due to distance or obstacles between products, the wireless quality may be improved by installing a repeater. 

whis product can be used as a repeater by changing the receiver settings. Up to three repeaters can be installed in one group. 

whe output of the repeater and the output of the receiver are linked. 

|Set|Repeater|
|---|---|
|OFF|Disable|
|ON|Enable|



## 8.7 Status Display 

Check the indicator status with its lighting. 

## (1)Wireless Quality 

Displays the communication quality of the wireless connection status with the connected device using its own indicator. 

|Indicator light status|Contents|
|---|---|
|Green|Wirelessqualityisgood.|
|Amber|Wireless quality is poor.<br>Reconsider the installation location or install a repeater.|
|Red|Waitingfor wireless connection.|
|Pink|Wireless connection to the destination is established, but wireless<br>connections between otherproducts in the system are not established.|



|Drawing No.|Rev.|Page|
|---|---|---|
|WIO-B1T-W18|B|16/16|



## (2) Answerback 

A light blue indicator light for 1 second confirms that input information from the transmitter has successfully transmitted to the receiver and that the output device has been operated on.