VS2KRP5V-809285

## **VS2 Opposed-Mode Sensors** 

## **Datasheet** 

_Miniature Self-Contained Sensors_ 

- Totally self-contained miniature sensors 

**==> picture [57 x 29] intentionally omitted <==**

**----- Start of picture text -----**<br>
BANNER<br>VS2<br>VS2AN5R<br>**----- End of picture text -----**<br>


- 10 V dc to 30 V dc operation 

- Visible red or infrared sensing beam, depending on model 

- Up to 3 m (118 in) sensing range (see Range specifications) 

- Choose dark or light operate models 

- Choose models with NPN or PNP output 

- 2-wire and 3-wire hookup; output load capacity to 50 mA 

- Choice of integral cable or quick-disconnect 

- Sensors may be purchased in pairs, or individually 

## **WARNING: Not To Be Used for Personnel Protection** 

**Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death.** This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. 

## **Models** 

|**Component**|**Cabled Models**<br>1|**QD Models**<br>2|**Sensing Beam/ Range**|**Output Type**|**Supply Voltage**|
|---|---|---|---|---|---|
|Emitter|**VS25EV**|**VS25EVQ**|Visible red, 660 nm<br>1.2 m (47 in)|NPN/ Light Operate|10 V dc to 30 V dc|
|Receiver|**VS2AN5R**|**VS2AN5RQ**||||
|Sensor Pair|**VS2KAN5V**|**VS2KAN5VQ**||||
|Emitter|**VS25EV**|**VS25EVQ**||PNP/ Light Operate||
|Receiver|**VS2AP5R**|**VS2AP5RQ**||||
|Sensor Pair|**VS2KAP5V**|**VS2KAP5VQ**||||
|Emitter|**VS25EV**|**VS25EVQ**||NPN/ Dark Operate||
|Receiver|**VS2RN5R**|**VS2RN5RQ**||||
|Sensor Pair|**VS2KRN5V**|**VS2KRN5VQ**||||
|Emitter|**VS25EV**|**VS25EVQ**||PNP/ Dark Operate||
|Receiver|**VS2RP5R**|**VS2RP5RQ**||||
|Sensor Pair|**VS2KRP5V**|**VS2KRP5VQ**||||
|Emitter|**VS25E**|**VS25EQ**|Infrared, 940 nm<br>3.0 m (118 in)|NPN/ Light Operate||
|Receiver|**VS2AN5R**|**VS2AN5RQ**||||
|Sensor Pair|**VS2KAN5**|**VS2KAN5Q**||||
|Emitter|**VS25E**|**VS25EQ**||PNP/ Light Operate||
|Receiver|**VS2AP5R**|**VS2AP5RQ**||||
|Sensor Pair|**VS2KAP5**|**VS2KAP5Q**||||
|Emitter|**VS25E**|**VS25EQ**||NPN/ Dark Operate||
|Receiver|**VS2RN5R**|**VS2RN5RQ**||||
|Sensor Pair|**VS2KRN5**|**VS2KRN5Q**||||
|Emitter|**VS25E**|**VS25EQ**||PNP/ Dark Operate||
|Receiver|**VS2RP5R**|**VS2RP5RQ**||||
|Sensor Pair|**VS2KRP5**|**VS2KRP5Q**||||



1 Cabled models have 2 m (6.5 ft) integral cable; 2-wire for emitters, 3-wire for receivers. 

- 2 QD models have 3-pin 150 mm (6.5 in) Pico-style QD. QD models require mating corset. 

Original Document 57248 Rev. F 

26 September 2017 

57248 

VS2 Opposed-Mode Sensors 

## **Overview** 

VS2 Series miniature self-contained sensors are designed for precision sensing in small areas previously accessible only to remote or fiber optic models. Typical applications include mounting inside vibrating feeders and electronic component handling equipment. 

## **Wiring Diagrams** 

**==> picture [453 x 73] intentionally omitted <==**

**----- Start of picture text -----**<br>
Emitters NPN Models PNP Models Key<br>1 = Brown<br>3 = Blue<br>3 3 – 1 + 4 = Black<br>10-30V dc– 1 10-30 V dc+ 3 10-30 V dc–<br>1 + 4 Load 4 Load<br>**----- End of picture text -----**<br>


Quick disconnect (QD) wiring diagrams are functionally identical. 

## **Specifications** 

|**Specifications**||
|---|---|
|**Supply Voltage and Current**|**Indicators**|
|10 V dc to 30 V dc (10% maximum ripple)<br>**Emitter:**25 mA (visible beam); 30 mA (infrared beam)<br>**Receiver:**25 mA (exclusive of load)<br>**Supply Protection Circuitry**<br>Protected against reverse polarity and transient voltages<br>**Output Configuration**<br>SPST solid-state switch<br>Choose NPN (current sinking) or PNP (current sourcing) models<br>Choose light operate (N.O.) or dark operate (N.C.) models<br>**Output Rating**<br>50 mA maximum<br>Off-state leakage current: < 1 microamp at 24V dc<br>On-state saturation voltage: < 0.25V at 10 mA dc; < 0.5V at 50 mA dc|Two LEDs: Green and Amber<br>Green ON = power to sensor is ON<br>Green flashing = output overload<br>Amber ON = light is sensed<br>Amber flashing = marginal excess gain (1–1.5×) in light condition<br>**Construction**<br>Black ABS housing with clear MABS lens<br>**Connections**<br>2 m (6.5 ft) attached cable: three #28 ga stranded conductors with PE insulation; PVC<br>outer cable jacket; or 3-pin 150 mm (6.5 in) Pico-style quick-disconnect fitting. QD cables<br>are ordered separately.<br>**Environmental Rating**<br>IEC IP67, NEMA 6|
|**Output Protection Circuitry**<br>Protected against output short-circuit, continuous overload, and false pulse on power-up<br>Overload trip point ≥ 100 mA|**Operating Conditions**<br>−20 °C to +55 °C (−4 °F to +131°F)<br>80% at +50 °C maximum relative humidity (non-condensing)|
|**Output Response Time**<br>1 millisecond ON and 0.5 milliseconds OFF<br>**Note:**100 millisecond delay on power-up: output is non-<br>conducting during this time<br>=|**Vibration and Mechanical Shock**<br>**Vibration:**All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-<br>STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak<br>**Shock:**All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11<br>millisecond pulse duration, half-sine wave pulse shape|
|**Repeatability**<br>100 microseconds|**Application Notes**<br>M2 stainless steel mounting hardware included. Optional mounting brackets are<br>available|
||**Certifications**|



## **Performance Curves** 

**==> picture [396 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess Gain Curves Beam Patterns<br>1000<br>E VS2 Series<br>X Effective Beam: 3 mm<br>C Opposed Mode<br>E 100 CoN Visible Red Tl 300 mm OVS2 Seriespposed Mode  12 in<br>S 200 mm Visible Red 8 in<br>S<br>G 10 CCT NCH 100 mm0 ———— 4 in0<br>A 100 mm 4 in<br>I 200 mm 8 in<br>N | TT TTT PTT a ee<br>300 mm 12 in<br>1<br>| | EVTIVI TTI) ETT oe<br>0.01 m 0.10 m 1.0 m 10.0 m 0 0.3 m 0.6 m 0.9 m 1.2 m 1.5 m<br>0.4 in 4 in 40 in 400 in 12 in 24 in 36 in 48 in 60 in<br>DISTANCE DISTANCE<br>**----- End of picture text -----**<br>


www.bannerengineering.com - Tel: +1-763-544-3164 

P/N 57248 Rev. F 

2 

VS2 Opposed-Mode Sensors 

**Beam Patterns** 

## **Excess Gain Curves** 

**==> picture [145 x 143] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000<br>E VS2 Series<br>X<br>C Opposed Mode<br>E 100 Infrared<br>S<br>S<br>G 10<br>A<br>I<br>N<br>1<br>0.01 m 0.10 m 1.0 m 10.0 m<br>0.4 in 4 in 40 in 400 in<br>DISTANCE<br>**----- End of picture text -----**<br>


**==> picture [152 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
Effective Beam: 3 mm<br>VS2 Series<br>600 mm Opposed Mode  24 in<br>400 mm Infrared 16 in<br>200 mm 8 in<br>0 0<br>-200 mm -8 in<br>-400 mm -16 in<br>-600 mm -24 in<br>0 0.75 m 1.5 m 2.25 m 3.0 m 3.75 m<br>2.5 ft 5 ft 7.4 ft  10 ft 13.1 ft<br>DISTANCE<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [253 x 163] intentionally omitted <==**

**----- Start of picture text -----**<br>
12.0 mm<br>ae (0.47")<br>8.0 mm<br>CL (0.31") 4.3 mm<br>Green Power (0.17")<br>Indicator 2 .0 mm 3.6 mm<br>(0.08") (0.14")<br>me<br>Amber<br>16.7 mm<br>25.1 mm Signal Indicator<br>(0.66")<br>(0.99") (Receiver only)<br>|<br>2x ø2.2 mm<br>4.8 mm (0.09")<br>(0.19")<br>**----- End of picture text -----**<br>


## **Accessories** 

## **Quick-Disconnect Cables** 

|**3-Pin Threaded M8/Pico-Style Cordsets**<br>~~Pd~~<br>~~a~~<br>a|**3-Pin Threaded M8/Pico-Style Cordsets**<br>~~Pd~~<br>~~a~~<br>a|**3-Pin Threaded M8/Pico-Style Cordsets**<br>~~Pd~~<br>~~a~~<br>a|**3-Pin Threaded M8/Pico-Style Cordsets**<br>~~Pd~~<br>~~a~~<br>a|**3-Pin Threaded M8/Pico-Style Cordsets**<br>~~Pd~~<br>~~a~~<br>a|
|---|---|---|---|---|
|**Model**<br>~~a~~|**Length**<br>a|**Style**|**Dimensions**|**Pinout (Female)**|
|**PKG3M-2**<br>~~a~~|2 m (6.56 ft)<br>a|Straight|**ø 9.5**<br>**35 Typ.**<br>**M8 x 1**<br>~~a~~<br>~~a~~|**4**<br>**3**<br>**1**<br>1 = Brown<br>3 = Blue<br>4 = Black<br>=O|
|**PKG3M-5**<br>**PKG3M-7**|5 m (16.40 ft)<br>7 m (22.97 ft)||||
|**PKG3M-7**<br>**PKG3M-9**|7 m (22.97 ft)<br>9 m (29.53 ft)||||
|**PKG3M-10**|10 m (32.81 ft)||||



## **Apertures** 

All models are • 0.1 mm 300 series stainless steel. 

P/N 57248 Rev. F 

www.bannerengineering.com - Tel: +1-763-544-3164 

3 

VS2 Opposed-Mode Sensors 

**==> picture [498 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
S Model Description SD<br>Circular<br>APVS2-0204 Two openings, 0.5 (0.02 in) and 1 mm (0.04 in) diameter<br>APVS2-0608 Two openings, 1.5 (0.06 in) and 2.0 (0.08 in) mm diameter<br>Horizontal and Vertical Slot<br>APVS2-02R One each, 0.5 mm (0.02 in) wide<br>APVS2-04R One each, 1.0 mm (0.04 in) wide<br>**----- End of picture text -----**<br>


## **Brackets** 

**==> picture [213 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
SMBVS2RA 14<br>• Right-angle bracket 4 X Ø2.3<br>• Stainless steel<br>Hole center spacing:  A = 80.0 20 Q<br>Hole size:  A = 3.2 x 6.0 2 X Ø3.2<br>(f:<br>SK<br>i. 20<br>**----- End of picture text -----**<br>


## **Banner Engineering Corp. Limited Warranty** 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

**THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.** 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. **IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.** 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: _www.bannerengineering.com_ . 

© Banner Engineering Corp. All rights reserved 

more sensors, more solutions