Image not available
Illustrative purposes only
VS-HFA30TA60CS-M3
Fast / Ultrafast Diode, 600 V, 30 A, Dual Common Cathode, 2 V, 60 ns, 150 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: VISHAY
- Product type: Fast & Ultrafast Recovery Rectifier Diodes
- Repetitive Reverse Voltage Vrrm Max:600V; Forward Current If(AV):30A; Diode Configuration:Dual Common Cathode; Forward Voltage VF Max:2V; Reverse Recovery Time trr Max:60ns; Forward
- SVHC: Lead (04-Feb-2026)
- No. of Pins: 3 Pin
- Product Range: HEXFRED
- Qualification: -
- Diode Case Style: TO-263AB
- Diode Configuration: Dual Common Cathode
- Forward Voltage Max: 2V
- Forward Surge Current: 150A
- Reverse Recovery Time: 60ns
- Average Forward Current: 30A
- Operating Temperature Max: 150°C
- Repetitive Peak Reverse Voltage: 600V
| Delivery and price | |
|---|---|
| Units per pack | 1000 |
| Price | 1.17 € |
| Current stock | 1000+ |
| Lead time | 30 days |
Datasheet
**VS-HFA30TA60CS-M3** ~~—~~ www.vishay.com Vishay Semiconductors ## **HEXFRED[®] , Ultrafast Soft Recovery Diode, 2 x 15 A** ## **FEATURES** - Ultrafast and ultrasoft recovery - Very low IRRM and Qrr - Specified at operating conditions **==> picture [95 x 50] intentionally omitted <==** **----- Start of picture text -----**<br> 2<br>1<br>3<br>D [2] PAK (TO-263AB)<br>**----- End of picture text -----**<br> **==> picture [87 x 92] intentionally omitted <==** **----- Start of picture text -----**<br> Base<br>common<br>cathode<br>2<br>2<br>1 3<br>Common<br>Anode Anode<br>cathode<br>**----- End of picture text -----**<br> ## **PRIMARY CHARACTERISTICS** |**PRIMARY CHARACTERISTICS**|**PRIMARY CHARACTERISTICS**| |---|---| |IF(AV)|2 x 15 A| |VR|600 V| |VFat IF|1.2 V| |trr(typ.)|19 ns| |TJmax.|150 °C| |Package|D2PAK (TO-263AB)| |Circuit configuration|Common cathode| - Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C - Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ## **BENEFITS** - Reduced RFI and EMI - Reduced power loss in diode and switching transistor - Higher frequency operation - Reduced snubbing - Reduced parts count ## **DESCRIPTION** VS-HFA30TA60CS is a state of the art center tap ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 V and 15 A per leg continuous current, the VS-HFA30TA60CS is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultrafast recovery time, the HEXFRED[®] product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to “snap-off” during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED VS-HFA30TA60CS is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. ## **ABSOLUTE MAXIMUM RATINGS** |**ABSOLUTE MAXIMUM RATINGS**|**ABSOLUTE MAXIMUM RATINGS**|**ABSOLUTE MAXIMUM RATINGS**|**ABSOLUTE MAXIMUM RATINGS**|**ABSOLUTE MAXIMUM RATINGS**| |---|---|---|---|---| |**PARAMETER**|**SYMBOL**|**TEST CONDITIONS**|**VALUES**|**UNITS**| |Cathode to anode voltage|VR||600|V| |Maximum continuous forward current<br>per leg<br>per device|IF|TC= 100 °C|15|A| ||||30|| |Single pulse forward current|IFSM||150|| |Maximum repetitive forward current|IFRM||60|| |Maximum power dissipation|PD|TC= 25 °C|74|°C| |||TC= 100 °C|29|| |Operatingjunction and storage temperature range|TJ, TStg||-55 to +150|W| Revision: 16-Dec-2021 Document Number: 96420 **1** For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **VS-HFA30TA60CS-M3** www.vishay.com ## Vishay Semiconductors ## **ELECTRICAL SPECIFICATIONS PER LEG** (TJ = 25 °C unless otherwise specified) |**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)|**ELECTRICAL SPECIFICATIONS PER LEG**(TJ= 25 °C unless otherwise specified)| |---|---|---|---|---|---|---|---| |**PARAMETER**|**SYMBOL**|**TEST CONDITIONS**||**MIN.**|**TYP.**|**MAX.**|**UNITS**| |Cathode to anode<br>breakdown voltage|VBR|IR= 100 μA||600|-|-|V| |Maximum forward voltage|VFM|IF= 15 A|See fig. 1|-|1.3|1.7|| |||IF= 30 A||-|1.5|2.0|| |||IF= 15 A, TJ= 125 °C||-|1.2|1.6|| |Maximum reverse<br>leakage current|IRM|VR= VRrated|See fig. 2|-|1.0|10|μA| |||TJ= 125 °C, VR= 0.8 x VRrated||-|400|1000|| |Junction capacitance|CT|VR= 200 V|See fig. 3|-|25|50|pF| |Series inductance|LS|Measured lead to lead 5 mm from package body||-|8.0|-|nH| ## **DYNAMIC RECOVERY CHARACTERISTICS PER LEG** (TJ = 25 °C unless otherwise specified) |**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)|**DYNAMIC RECOVERY CHARACTERISTICS PER LEG**(TJ= 25 °C unless otherwise specified)| |---|---|---|---|---|---|---|---| |**PARAMETER**|**SYMBOL**|**TEST CONDITIONS**||**MIN.**|**TYP.**|**MAX.**|**UNITS**| |Reverse recovery time<br>See fig. 5, 10|trr|IF= 1.0 A, dIF/dt = 200 A/μs, VR= 30 V||-|19|-|ns| ||trr1|TJ= 25 °C|IF= 15 A<br>dIF/dt = 200 A/μs<br>VR= 200 V|-|42|60|| ||trr2|TJ= 125 °C||-|70|90|| |Peak recovery current<br>See fig. 6|IRRM1|TJ= 25 °C||-|4.0|6.0|A| ||IRRM2|TJ= 125 °C||-|6.5|10|| |Reverse recovery charge<br>See fig. 7|Qrr1|TJ= 25 °C||-|80|180|nC| ||Qrr2|TJ= 125 °C||-|220|450|| |Peak rate of fall of recovery<br>current during tb<br>See fig. 8|dI(rec)M/dt1|TJ= 25 °C||-|188|-|A/μs| ||dI(rec)M/dt2|TJ= 125 °C||-|160|-|| ## **THERMAL - MECHANICAL SPECIFICATIONS PER LEG** |**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**|**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**|**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**|**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**|**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**|**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**|**THERMAL - MECHANICAL SPECIFICATIONS PER LEG**| |---|---|---|---|---|---|---| |**PARAMETER**|**SYMBOL**|**TEST CONDITIONS**|**MIN.**|**TYP.**|**MAX.**|**UNITS**| |Lead temperature|Tlead|0.063" from case (1.6 mm) for 10 s|-|-|300|°C| |Junction to case,<br>single legconducting|RthJC||-|-|1.7|K/W| |Junction to case,<br>both legs conducting|||-|-|0.85|| |Thermal resistance,<br>junction to ambient|RthJA|Typical socket mount|-|-|80|| |Weight|||-|2.0|-|g| ||||-|0.07|-|oz.| |Mounting torque|||6.0<br>(5.0)|-|12<br>(10)|kgf · cm<br>(lbf · in)| |Markingdevice||Case style D2PAK (TO-263AB)|HFA30TA60CS|||| Revision: 16-Dec-2021 Document Number: 96420 **2** For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **VS-HFA30TA60CS-M3** www.vishay.com ## Vishay Semiconductors **==> picture [202 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>TJ = 150 °C<br>10 T J = 125 °C<br>T J = 25 °C<br>1<br>1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4<br>VFM - Forward Voltage Drop (V)<br> - Instantaneous Forward Current (A)<br>IF<br>**----- End of picture text -----**<br> Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current (Per Leg) **==> picture [203 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 10 000<br>TJ = 150 °C<br>1000<br>100 T J = 125 °C<br>10<br>1<br>0.1 TJ = 25 °C<br>0.01<br>0 100 200 300 400 500 600<br>VR - Reverse Voltage (V)<br> - Reverse Current (μA)<br>IR<br>**----- End of picture text -----**<br> Fig. 2 - Typical Reverse Current vs. Reverse Voltage (Per Leg) **==> picture [203 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>TJ = 25 °C<br>10<br>0 100 200 300 400 500 600<br>VR - Reverse Voltage (V)<br> - Junction Capacitance (pF)<br>T<br>C<br>**----- End of picture text -----**<br> Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) **==> picture [406 x 163] intentionally omitted <==** **----- Start of picture text -----**<br> 10<br>1<br>P DM<br>D = 0.50 t 1<br>D = 0.20<br>0.1 D = 0.10 t2<br>D = 0.05<br>Notes:<br>D = 0.02<br>Single pulse D = 0.01 1. Duty factor D = t1/t2<br>(thermal response) 2. Peak T J = P DM x Z thJC + T C<br>0.01<br>0.00001 0.0001 0.001 0.01 0.1 1 10<br>t1 - Rectangular Pulse Duration (s)<br> - Thermal Response<br>thJC<br>Z<br>**----- End of picture text -----**<br> Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Revision: 16-Dec-2021 Document Number: 96420 **3** For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **VS-HFA30TA60CS-M3** www.vishay.com ## Vishay Semiconductors **==> picture [204 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>IF = 30 A<br>IF = 15 A<br>80 I F = 5 A<br>60<br>40<br>20 V R = 200 V<br>TJ = 125 °C<br>TJ = 25 °C<br>0<br>100 1000<br>dIF/dt (A/μs)<br> (ns)<br>trr<br>**----- End of picture text -----**<br> Fig. 5 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg) **==> picture [205 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 10 000<br>VR = 200 V<br>T J = 125 °C<br>T J = 25 °C<br>IF = 30 A<br>IF = 15 A<br>1000 IF = 5 A<br>100<br>100 1000<br>dIF/dt (A/μs)<br>/dt (A/μs)<br>(rec)M<br>dI<br>**----- End of picture text -----**<br> Fig. 8 - Typical dI(rec)M/dt vs. dIF/dt (Per Leg) **==> picture [204 x 165] intentionally omitted <==** **----- Start of picture text -----**<br> 25<br>VR = 200 V<br>TJ = 125 °C<br>20 T J = 25 °C<br>IF = 30 A<br>IF = 15 A<br>15 IF = 5 A<br>10<br>5<br>0<br>100 1000<br>dIF/dt (A/μs)<br> (A)<br>Irr<br>**----- End of picture text -----**<br> Fig. 6 - Typical Recovery Current vs. dIF/dt (Per Leg) **==> picture [204 x 164] intentionally omitted <==** **----- Start of picture text -----**<br> 800<br>VR = 200 V<br>T J = 125 °C<br>TJ = 25 °C<br>600<br>IF = 30 A<br>I F = 15 A<br>IF = 5 A<br>400<br>200<br>0<br>100 1000<br>dIF/dt (A/μs)<br> (nC)<br>rr<br>Q<br>**----- End of picture text -----**<br> Fig. 7 - Typical Stored Charge vs. dIF/dt (Per Leg) Revision: 16-Dec-2021 Document Number: 96420 **4** For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **VS-HFA30TA60CS-M3** www.vishay.com ## Vishay Semiconductors **==> picture [272 x 220] intentionally omitted <==** **----- Start of picture text -----**<br> (3)<br>IF trr<br>ta tb<br>0<br>(4)<br>Qrr<br>(2)<br>IRRM 0.5 IRRM<br>di(rec)M/dt (5)<br>0.75 IRRM<br>(1) diF/dt<br>(1) diF/dt - rate of change of current (4) Qrr - area under curve defined by trr<br> through zero crossing and IRRM<br>(2) IRRM - peak reverse recovery current Qrr = t 2rr x IRRM<br>(3) t from zero crossing point of negative rr - reverse recovery time measured (5) di(rec)M/dt - peak rate of change of<br> going IF to point where a line passing current during tb portion of trr<br> through 0.75 IRRM and 0.50 IRRM<br> extrapolated to zero current.<br>**----- End of picture text -----**<br> Fig. 9 - Reverse Recovery Waveform and Definitions ## **ORDERING INFORMATION TABLE** **==> picture [391 x 270] intentionally omitted <==** **----- Start of picture text -----**<br> Device code VS- HF A 30 TA 60 C S L -M3<br>1 2 3 4 5 6 7 8 9 10<br>1 - Vishay Semiconductors product<br>2 - HEXFRED [®] family<br>3 - Process designator: A = electron irradiated<br>4 - Current rating (30 = 30 A)<br>5 - Package outline (TA = TO-220, 3 leads)<br>6 - Voltage rating (60 = 600 V)<br>7 - Circuit configuration (C = common cathode)<br>8 - S = D [2] PAK (TO-263AB)<br>9 - • None = tube<br>• L = tape and reel (left oriented)<br>• R = tape and reel (right oriented)<br>10 - Environmental digit<br>-M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free<br>**----- End of picture text -----**<br> Revision: 16-Dec-2021 Document Number: 96420 **5** For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **VS-HFA30TA60CS-M3** www.vishay.com ## Vishay Semiconductors |**ORDERING INFORMATION**(Example)|**ORDERING INFORMATION**(Example)|**ORDERING INFORMATION**(Example)||| |---|---|---|---|---| |**PREFERRED P/N**|**BASE QUANTITY**|||**PACKAGING DESCRIPTION**| |VS-HFA30TA60CS-M3|50|||Antistatic plastic tube| |VS-HFA30TA60CSR-M3|800|||13" diameter reel| |VS-HFA30TA60CSL-M3|800|||13" diameter reel| |||||| |**LINKS TO RELATED DOCUMENTS**||||| |Dimensions|||www.vishay.com/doc?96164|| |Part markinginformation|||www.vishay.com/doc?95444|| |Packaging information|||www.vishay.com/doc?96424|| Revision: 16-Dec-2021 Document Number: 96420 **6** For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **Outline Dimensions** **==> picture [59 x 48] intentionally omitted <==** www.vishay.com ## Vishay Semiconductors ## **D[2] PAK** ## **DIMENSIONS** in millimeters and inches **==> picture [496 x 342] intentionally omitted <==** **----- Start of picture text -----**<br> Conforms to JEDEC [®] outline D [2] PAK (SMD-220) B<br>A Pad layout<br>(2)(3) A (E)<br>c2 11.00<br>E MIN.<br>(0.43)<br>A<br>(3) L1 4<br>9.65<br>MIN.<br>(0.38)<br>(D1) (3)<br>Detail A<br>D 17.90 (0.70)<br>H 15.00 (0.625)<br>(2)<br>1 2 3<br>3.81<br>MIN.<br>L2 (0.15)<br>B B 2.32<br>MIN.<br>(0.08)<br>A<br>2.64 (0.103)<br>2 x b2 C E1 (3) 2.41 (0.096)<br>c<br>2 x b View A - A<br>0.010 M A M B ± 0.004 M B<br>2 x e<br>Base<br>Plating (4) Metal<br>H b1, b3<br>Gauge<br>plane<br>(c) c1 (4)<br>0° to 8° B<br>L Seating<br>plane<br>L3 A1<br>(b, b2)<br>Lead tip L4 Section B - B and C - C<br>Detail “A” Scale: None<br>Rotated 90 °CW<br>Scale: 8:1<br>**----- End of picture text -----**<br> |**SYMBOL**|**MILLIMETERS**|**MILLIMETERS**|**INCHES**|**INCHES**|**NOTES**||**SYMBOL**|**MILLIMETERS**|**MILLIMETERS**|**INCHES**|**INCHES**|**NOTES**| |---|---|---|---|---|---|---|---|---|---|---|---|---| ||**MIN.**|**MAX.**|**MIN.**|**MAX.**||||**MIN.**|**MAX.**|**MIN.**|**MAX.**|| |A|4.06|4.83|0.160|0.190|||D1|6.86|8.00|0.270|0.315|3| |A1|0.00|0.254|0.000|0.010|||E|9.65|10.67|0.380|0.420|2, 3| |b|0.51|0.99|0.020|0.039|||E1|7.90|8.80|0.311|0.346|3| |b1|0.51|0.89|0.020|0.035|4||e|2.54 BSC||0.100 BSC||| |b2|1.14|1.78|0.045|0.070|||H|14.61|15.88|0.575|0.625|| |b3|1.14|1.73|0.045|0.068|4||L|1.78|2.79|0.070|0.110|| |c|0.38|0.74|0.015|0.029|||L1|-|1.65|-|0.066|3| |c1|0.38|0.58|0.015|0.023|4||L2|1.27|1.78|0.050|0.070|| |c2|1.14|1.65|0.045|0.065|||L3|0.25 BSC||0.010 BSC||| |D|8.51|9.65|0.335|0.380|2||L4|4.78|5.28|0.188|0.208|| ## **Notes** - (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 - (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body - (3) Thermal pad contour optional within dimension E, L1, D1 and E1 - (4) Dimension b1 and c1 apply to base metal only - (5) Datum A and B to be determined at datum plane H - (6) Controlling dimension: inches - (7) Outline conforms to JEDEC® outline TO-263AB Revision: 13-Jul-17 **1** Document Number: 96164 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 **Legal Disclaimer Notice** Vishay www.vishay.com ## **Disclaimer** ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. _**© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED**_ Revision: 01-Jan-2022 Document Number: 91000 **1**
Updated at June 7, 2026
Vishay is a global leader in the manufacturing of discrete semiconductors and passive electronic components. Renowned for its exceptional quality and engineering expertise, the company produces highly reliable solutions that drive innovation across the industrial, automotive, telecommunications, and consumer electronics markets. From advanced factory automation to vehicle electrification, Vishay components provide the foundational building blocks for modern electronic design. The company's expansive portfolio is heavily focused on efficient power management, signal routing, and energy storage. Within its passive component lineup, Vishay is recognized for its extensive array of high-performance capacitors, including robust aluminium electrolytic, film, and polymer variants, alongside highly efficient power inductors. In the realm of discrete semiconductors, Vishay is a premier manufacturer of single and dual MOSFETs, as well as a vast selection of Schottky, Zener, and fast-recovery rectifier diodes designed for demanding power applications. Furthermore, Vishay delivers industry-leading circuit protection and thermal management solutions. With a broad offering of transient voltage suppressors (TVS diodes) and temperature-sensing NTC thermistors, these components are engineered to safeguard sensitive circuitry against both electrical and thermal overstress. By combining this vital mix of advanced discretes and passives, Vishay enables engineers to develop robust, space-saving, and highly resilient electronic systems.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →