VGS-500-5

Additional Resources:    Product Page    |    3D Model 

**date** 11/22/2023 **page** 1 of 7 

## **SERIES:** VGS-500 **DESCRIPTION:** AC-DC POWER SUPPLY **│** 

## **FEATURES** 

- 85 ~ 305 Vac, 120 ~ 430 Vdc input voltage 

- adjustable output voltage 

- accepts AC or DC Input (dual use of same terminal) 

- certified to EN/BS EN/UL 62368-1 

- design to meet IEC/UL 60335-1, EN 61558, GB 4943 

- CISPR32/EN55032 CLASS B compliant 

- temperature range -40 °C ~ +85 °C with derating 

- baseplate cooling 

- over-temperature, output over-voltage, over-current, and short-circuit protection 

- over-current & short-circuit protection delay 

- 5,000 m operating altitude 

## RoHS 

|RoHS<br>TAL|C €||||||
|---|---|---|---|---|---|---|
|**MODEL**||**output**<br>**voltage**|**output**<br>**current**|**output**<br>**power**|**ripple**<br>and noise’|**efficiency2**|
||**typ**<br>(Vdc)|**range**<br>(Vdc)|**max**<br>(A)|**max**<br>(W)|**typ**<br>(mVp-p)|**typ**<br>(%)|
|VGS-500-5|5|4.5~5.5|80.0|400.0|200|90|
|VGS-500-12|12|11.4~12.6|41.7|500.4|200|94|
|VGS-500-24|24|22.8~25.2|20.9|501.6|200|94.5|
|VGS-500-36|36|34.2~37.8|13.9|500.4|200|95|
|VGS-500-48|48|45.6~50.4|10.45|501.6|200|95|
|VGS-500-55|55|45.0~58.0|8.9|489.5|200|95|



Note:  i  1. Ripple and noise are measured at 20 MHz BW with 47 uF aluminum electrolytic capacitor and 0.1 uF ceramic capacitor on the output. 

2. Measured at 230 Vac. 

ii    3. Unless otherwise specified, the parameters in this datasheet were measured under the conditions of Ta=25°C, humidity<75% RH with nominal input voltage and rated output load. 

## **PART NUMBER KEY** 

## **VGS-500 - XX** 

Base Number 

Output Voltage 

**cui** .com 

Additional Resources:    Product Page    |    3D Model 

**CUI Inc │ SERIES:** VGS-500 **│ DESCRIPTION:** AC-DC POWER SUPPLY 

**date** 11/22/2023 **│ page** 2 of 7 

## **INPUT** 

|**INPUT**||||||
|---|---|---|---|---|---|
|**parameter**|**conditions/description**|**min**|**typ**|**max**|**units**|
|voltage range|ac input<br>dc input|85<br>120||305<br>430|Vac<br>Vdc|
|frequency range||47||63|Hz|
|current|at 115 Vac<br>at 230 Vac|||5<br>3|A<br>A|
|inrush current|at 115 Vac, cold start<br>at 230 Vac, cold start||30<br>60||A<br>A|
|leakage current|at 277 Vac|||0.75|mA|
|power factor|at 115 Vac, full load<br>at 230 Vac, full load|0.98<br>0.95||||



## **OUTPUT** 

|**OUTPUT**||||||
|---|---|---|---|---|---|
|**parameter**|**conditions/description**|**min**|**typ**|**max**|**units**|
||at 25°C|||||
||5 Vdc output model|||12,000|μF|
||12 Vdc output model|||10,000|μF|
|capacitive load|24 Vdc output model|||8,000|μF|
||36 Vdc output model|||6,000|μF|
||48 Vdc output model|||4,000|μF|
||55 Vdc output model|||2,000|μF|
|initial set point acuracy|5 Vdc output model, full load range<br>all other models, full load range||±2<br>±1||%<br>%|
|line regulation|5 Vdc output model, rated load<br>all other models,rated load||±0.5<br>±0.3||%<br>%|
|load regulation|5 V model, 0~100% load<br>all other models, 0~100% load||±1<br>±0.5||%<br>%|
|hold-up time|at 115 & 230 Vac, full load||12||ms|



## **PROTECTIONS** 

|**PROTECTIONS**||||||
|---|---|---|---|---|---|
|**parameter**|**conditions/description**|**min**|**typ**|**max**|**units**|
|over current protection|auto recovery, hiccup|110|||%|
||output shut-down, auto recovery|||||
||5 Vdc output model|5.75||6.75|Vdc|
||12 Vdc output model|13.2||15.6|Vdc|
|over voltage protection|24 Vdc output model|26.4||31.2|Vdc|
||36 Vdc output model|39.6||46.8|Vdc|
||48 Vdc output model|52.8||60.0|Vdc|
||55 Vdc output model|60.0||69.0|Vdc|
|short circuit protection4|hiccup, continuous, auto recovery|||||
|over temperature protection|output shutdown, auto recovery|||||



Note:     i 4. Recovery time is 5s  max after the abnormality is removed. 

**cui** .com 

Additional Resources:    Product Page    |    3D Model 

**CUI Inc │ SERIES:** VGS-500 **│ DESCRIPTION:** AC-DC POWER SUPPLY 

**date** 11/22/2023 **│ page** 3 of 7 

## **SAFETY & COMPLIANCE** 

|**parameter**|**conditions/description**|**min**|**typ**|**max**|**units**|
|---|---|---|---|---|---|
||input to output for 1 minute, 10 mA max|4,000|||Vac|
|isolation voltage|input to ground for 1 minute, 10 mA max|2,000|||Vac|
||output to ground for 1 minute, 10 mA max|1,500|||Vac|
||certifed to 62368-15: EN, BS EN, UL|||||
|safety approvals|designed tomeet 60335-1: IEC, UL<br>designed tomeet 61558-1: EN|||||
||designed tomeet 4943-1: GB|||||
|safety class|Class I|||||
|conducted emissions|CISPR32/EN55032  CLASS B|||||
|radiated emissions|CISPR32/EN55032  CLASS B|||||
|harmonic current|IEC/EN61000-3-2 CLASS A/D|||||
|voltage ficker|IEC/EN61000-3-3|||||
|ESD|IEC/EN61000-4-2   Contact ±8KV /Air ±15KV, perf.|Criteria A||||
|radiated immunity|IEC/EN61000-4-3   10V/m, perf. Criteria A|||||
|EFT/burst|IEC/EN61000-4-4   ±2KV, perf. Criteria A<br>output port: EN61000-6-2   ±2KV, perf. Criteria A|||||
|surge|IEC/EN61000-4-5   line to line ±2KV/line to ground, perf. Criteria A<br>output port: EN61000-6-2  line to line ±0.5KV/line to ground, perf.||Criteria A|||
|conducted immunity|IEC/EN61000-4-6   10Vrms, perf. Criteria A<br>output port: EN61000-6-2  10Vrms, perf. Criteria A|||||
|power frequency magnetic feld|IEC/EN61000-4-8   30A/m, perf. Criteria A|||||
|voltage dips and interruption|IEC/EN61000-4-11  0%, 70%, perf. Criteria B|||||
|intercom interference test|MS-SOP-DQC-007, perf. Criteria B|||||
|RoHS compliant|yes|||||
|MTBF|as per MIL-HDBK-217F at 25 °C|200,000|||hrs|



Note:     i 5. Certification applies to 100~277 Vac applications. 

## **ENVIRONMENTAL** 

|**ENVIRONMENTAL**||||||
|---|---|---|---|---|---|
|**parameter**|**conditions/description**|**min**|**typ**|**max**|**units**|
|operating temperature|see derating curve|-40||85|°C|
|storage temperature||-40||85|°C|
|operating humidity|non-condensing|20||90|%|
|storage humidity|non-condensing|10||95|%|
|**MECHANICAL**||||||
|**parameter**|**conditions/description**|**min**|**typ**|**max**|**units**|
|dimensions|232.00 x 81.00 x 31.00||||mm|
|weight|||985||g|
|cooling|natural convection|||||
|case material|metal (AL6063, SGCC)|||||



**cui** .com 

Additional Resources:    Product Page    |    3D Model 

**CUI Inc │ SERIES:** VGS-500 **│ DESCRIPTION:** AC-DC POWER SUPPLY 

**date** 11/22/2023 **│ page** 4 of 7 

## **MECHANICAL DRAWING** 

units: mm [inches] tolerance: ±1.00 [±0.039] ADJ: Output voltage adjustment potentiometer Wire range: 22~14 AWG Tightening torque: M3, Max 0.5 N·m 

|PIN|PIN OUT<br>Function|PIN OUT<br>Function||Position|Installation<br>Method|Screw Spec. L (suggested)|Screw Spec. L (suggested)|Torque (max)|
|---|---|---|---|---|---|---|---|---|
||||||||||
|1||||1  ~ 2|screw out|M3|min. 10 mm|0.4 N·m|
|2||AC(N)|||screw in|M3|max. 8 mm|0.4 N·m|
|3||AC(L)|||||||
|4||+Vo|||||||
|5||+Vo|||||||
|6||-Vo|||||||
|7||-Vo|||||||



> Note:    6.  The out case needs to be connected to Protective Earth (   ) of system when the terminal equipment in operating. © 

**cui** .com 

Additional Resources:    Product Page    |    3D Model 

**CUI Inc │ SERIES:** VGS-500 **│ DESCRIPTION:** AC-DC POWER SUPPLY 

**date** 11/22/2023 **│ page** 5 of 7 

## **INSTALLATION DIAGRAM** 

**cui** .com 

Additional Resources:    Product Page    |    3D Model 

**CUI Inc │ SERIES:** VGS-500 **│ DESCRIPTION:** AC-DC POWER SUPPLY 

**date** 11/22/2023 **│ page** 6 of 7 

## **DERATING CURVES** 

Note:       7. This product is suitable for applications using natural convection. For applications in closed enviroment please consult CUI. 

## **EFFICIENCY CURVES** 

**cui** .com 

Additional Resources:    Product Page    |    3D Model 

**CUI Inc │ SERIES:** VGS-500 **│ DESCRIPTION:** AC-DC POWER SUPPLY 

**date** 11/22/2023 **│ page** 7 of 7 

## **REVISION HISTORY** 

|**rev.**|**description**|**date**|
|---|---|---|
|1.0|initial release|11/22/2023|



The revision history provided is for informational purposes only and is believed to be accurate. 

**==> picture [117 x 37] intentionally omitted <==**

**Headquarters** 20050 SW 112th Ave. Tualatin, OR 97062 **800.275.4899** 

Fax 503.612.2383 **cui** .com techsupport@cui.com 

CUI offers a two (2) year limited warranty.  Complete warranty information is listed on our website. 

CUI reserves the right to make changes to the product at any time without notice.  Information provided by CUI is believed to be accurate and reliable.  However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. 

CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability.  A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.