VEH90PS12

**90 Watts** 

xppower.com 

## **VEH Series** 

- Energy Efficiency Level V 

- CEC 2008 & EISA 2007 Compliant 

- High Power Density 

- Single Outputs from 12 V to 24 V 

- No Load Input Power <0.5 W 

- Optional Output Connector 

**==> picture [64 x 34] intentionally omitted <==**

**----- Start of picture text -----**<br>
B R A N D<br>a an<br>**----- End of picture text -----**<br>


- Low Cost 

## **Speci** ~~**fication**~~ 

## **Input** 

- Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • 1.5 A max at 90 VAC Inrush Current • 110 A max at 230 VAC, cold start at 25 °C Earth Leakage Current • <1 mA at 230 VAC/50 Hz Power Factor • >0.95 at 230 VAC and full load No Load Input Power • <0.5 W Input Protection • Internal T2.0A/250 V fuse in line 

## **Output** 

- Output Voltage • See table Initial Set Accuracy • ±5% at 50% load Minimum Load • No minimum load requirement Hold Up Time • 10 ms min at 115 VAC, full load Start Up Delay • 3 s max Start Up Rise Time • 8 ms typical Transient Response • 4% maxiumum deviation, recovering to less than 1% within 500 µs for a 50% step load change 

- Line Regulation • ±0.5% max Load Regulation • ±5% max Ripple & Noise • 1% pk-pk max, 20 MHz bandwidth (see note 1) 

- Overvoltage Protection • See table Overload Protection • 120 -180% Short Circuit Protection • Continuous (hiccup/trip & restart mode with auto recovery) 

Temperature • ±0.04%/°C Coefficient 

## **General** 

|**General**||
|---|---|
|Efficiency|• See table|
|Energy Efficiency|• Level V|
|Isolation|• 3000 VAC Input to Output,|
||1500 VAC Input to Ground|
||PS12: 500 VDC Output to Ground,<br>PS19/24: Negative output is connected to<br>Ground|
|Switching Frequency|• PFC: 25-125 kHz, PWM: 60 kHz typical|
|MTBF|• >160 kHrs to Bell Core iss. 6|



## **Environmental** 

|**Environmental**||
|---|---|
|Operating Temperature|• 0 °C to +60 °C derate linearly from 100%|
||load at +40 °C to 50% load at +60 °C,|
|Storage Temperature|• -10 ˚C to +85 °C|
|Operating Humidity|• 5% to 90% RH non-condensing|
|Storage Humidity|• 5% to 95% RH non-condensing|
|Shock|• 6 Random drops from 0.7 m with no|
||damage, 50 g for 20 ms in each of 3 axes|
|Vibration|• 2 g variable frequency from 20 Hz to 30 Hz|



## **EMC & Safety** 

|**EMC & Safetyy**||
|---|---|
|Emissions|• EN55022, level B conducted & radiated|
|Harmonic Currents|• EN61000-3-2 class A,|
||EN61000-3-2 class C >60% load|
|Voltage Flicker|• EN61000-3-3|
|ESD Immunity|• EN61000-4-2, level 3 Perf Criteria A|
|Radiated Immunity|• EN61000-4-3, 3 V/m Perf Criteria A|
|EFT/Burst|• EN61000-4-4, level 3 Perf Criteria A|
|Surge|• EN61000-4-5, installation class 3,|
||Perf Criteria A|
|Conducted Immunity|• EN61000-4-6, level 2 Perf Criteria A|
|Magnetic Field|• EN61000-4-8, 3 A/m Perf Criteria A|
|Dips & Interruptions|• EN61000-4-11, 30% 10 ms, 60% 100 ms,|
||100% 5000 ms, Perf Criteria A, B, B|
|Safety Approvals|• EN60950-1:2001, UL/cUL60950-1|



**VEH90** 

## ~~**Models and Ratings**~~ 

|Output Power|Output Voltage|Output Current|OVP Setting(2)|Effeciency(3)|Model Number(4)|
|---|---|---|---|---|---|
|90 W|12.0 V|7.50 A|16.0 V|88%|VEH90PS12†^|
|90 W|19.0 V|4.74 A|25.0 V|88%|VEH90PS19†^|
|90 W|24.0 V|3.75 A|32.0 V|89%|VEH90PS24†^|



## ~~**Notes**~~ 

_1. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor._ 

_2. Typical values._ 

_3. Average of efficiencies measured at 25%, 50%, 75% and 100% load and 230 VAC input._ 

_4. For optional barrel jack connector, 2.5 mm inner positive, 5.5 mm outer negative, 11 mm length add suffix ‘-B’ e.g. VEH90PS24-B_ 

## ~~**Mechanical Details**~~ 

**==> picture [19 x 36] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 3<br>2 4<br>**----- End of picture text -----**<br>


**==> picture [213 x 352] intentionally omitted <==**

**----- Start of picture text -----**<br>
5.24<br>(133.0)<br>ne<br>1.19 2.28<br>- (30.3) 41 ~_. (58.0)<br>IEC320-C6<br>0.67<br>(17.0)<br>**----- End of picture text -----**<br>


|Pin|Function|
|---|---|
|1|Output +|
|2|Output +|
|3|Return*|
|4|Return*|
|Shell|Floating|



*Return is internally connected to input earth on 19 V & 24 V models 

Power Cord, Order Part: UK - UK-MAINS-5 European - EU-MAINS-5 US - US-MAINS-5 

## ~~**Notes**~~ 

1. All dimensions shown in inches (mm). Tolerance is 0.02 (0.5) maximum, except output cable length. 2. Weight 0.82 lbs (370 g) approx. 

3. Cable length is 48”±2”(1220 ±50 mm) approx. 

4. Output connector (Power Mini Din) mates with Kycon KPJ-4S or equivalent. 

18-May-11