VEH150PS12
AC/DC Power Supply, ITE, 1 Output, 150 W, 12 VDC, 12.5 A
- Manufacturer: XP POWER
- Product type: AC / DC External Plug In Adaptor Power Supplies
- Plug Type: Mains Plug Sold Separately
- Product Range: VEH
- No. of Outputs: 1 Output
- Output Connector: 4 Way Mini DIN
- Output Power Max: 150W
- Input Voltage VAC: 90V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 90V
- Power Supply Approvals: ITE
- Power Supply Output Type: Fixed
- Output Current - Output 1: 12.5A
- Output Voltage - Output 1: 12VDC
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 63.19 € |
| Current stock | 10+ |
| Lead time | 30 days |
**150 Watts** xppower.com ## **VEH Series** - Energy Efficiency Level V - CEC 2008 / EISA 2007 / ErP Compliant - No Load Input Power <0.35 W - 5000 m Operating Altitude - Single Outputs from 12 V to 24 V - +60 º C Operating Temperature **==> picture [60 x 35] intentionally omitted <==** **----- Start of picture text -----**<br> B 2 R A N D<br>**----- End of picture text -----**<br> - Low Cost ## **Speci** ~~**fication**~~ ## **Input** |**Inputputut**||| |---|---|---| |Input Voltage|• 90-264 VAC, see note 1|| |Input Frequency|• 47-63 Hz|| |Input Current|• 2.0 A max at 90 VAC|| |Inrush Current|• 150 A max at 230 VAC, cold start at|25 °C| |Earth Leakage Current|• <500 µA at 230 VAC/50 Hz|| |Power Factor|• >0.95 at 230 VAC and full load|| |No Load Input Power|• <0.35 W|| |Input Protection|• Internal T4.0A/250 V fuse in line|| ## **General** |**General**|| |---|---| |Efficiency|• See table| |Energy Efficiency|• Level V| |Isolation|• 3000 VAC Input to Output,| ||1500 VAC Input to Ground| ||Negative output is connected to Ground| |Switching Frequency|• PFC: 38-380 kHz, PWM: 47-70 kHz| |Power Density|• 4.5 W/in3| |MTBF|• >145 kHrs to MIL STD 217F at 25 °C GB| ## **Environmental** ## **Output** - Output Voltage • See table Initial Set Accuracy • ±5% at 50% load Minimum Load • No minimum load requirement Hold Up Time • 8 ms typical at 115 VAC, full load Start Up Delay • 3 s max Start Up Rise Time • 60 ms max Overshoot • 3% max Transient Response • 4% maxiumum deviation, recovering to less than 1% within 500 µs for a 50% step load change - Line Regulation • ±0.5% max Load Regulation • 3% max Ripple & Noise • 1.5% for 12 V, 1% for 19/24 V pk-pk max, 20 MHz bandwidth (see note 2) - Overvoltage Protection • See table Overload Protection • 105-150% Short Circuit Protection • Continuous (hiccup/trip & restart mode with auto recovery) - Temperature • ±0.04%/°C Coefficient |**Environmental**|| |---|---| |Operating Temperature|• 0 °C to +60 °C derate linearly from 100%| ||load at +40 °C to 50% load at +60 °C,| |Storage Temperature|• -20 ˚C to +85 °C| |Operating Humidity|• 5% to 90% RH non-condensing| |Shock|• 6 Random drops from 0.7 m with no| ||damage, 50 g for 20 ms in each of 3 axes| |Operating Altitude|• 5000 m| |Vibration|• Operating: 10-250 Hz, 1/4 g pk-pk, 3 axes,| ||15 min sweep| ||Non Operating: 10-300 Hz, 2 g pk-pk, 3| ||axes, 15 min sweep| |Storage Humidity|• 5% to 95% RH non-condensing| ## **EMC & Safety** |**EMC & Safetyy**|| |---|---| |Emissions|• EN55022, level B conducted & radiated| |Harmonic Currents|• EN61000-3-2 class A,| ||EN61000-3-2 class C >60% load| |Voltage Flicker|• EN61000-3-3| |ESD Immunity|• EN61000-4-2, level 3 Perf Criteria A| |Radiated Immunity|• EN61000-4-3, 3 V/m Perf Criteria A| |EFT/Burst|• EN61000-4-4, level 2 Perf Criteria A| |Surge|• EN61000-4-5, installation class 3,| ||Perf Criteria A| |Conducted Immunity|• EN61000-4-6, level 2 Perf Criteria A| |Magnetic Field|• EN61000-4-8, 3 A/m Perf Criteria A| |Dips & Interruptions|• EN55024, 100% 10 ms, 30% 500 ms,| ||100% 5000 ms, Perf Criteria A, A, B| |Safety Approvals|• EN60950-1, UL/cUL60950-1| **VEH150** ## ~~**Models and Ratings**~~ |Output Power|Output Voltage|Output Current|OVP Setting(3)|Efficiency(4)|Model Number| |---|---|---|---|---|---| |150 W|12.0 V|12.50 A|20.0 V|91%|VEH150PS12| |150 W|19.0 V|7.90 A|27.0 V|91%|VEH150PS19| |150 W|24.0 V|6.25 A|34.0 V|91%|VEH150PS24| ## ~~**Notes**~~ _1. 12 V version output derates linearly from 150 W at 100 VAC to 135 W at 90 VAC._ _2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor at room temperature._ _3. Typical values._ _4. Average of efficiencies measured at 25%, 50%, 75% and 100% load and 230 VAC input._ ## ~~**Mechanical Details**~~ **==> picture [19 x 36] intentionally omitted <==** **----- Start of picture text -----**<br> 1 3<br>2 4<br>**----- End of picture text -----**<br> **==> picture [213 x 272] intentionally omitted <==** **----- Start of picture text -----**<br> 6.85<br>(174.0)<br>ne<br>1.65 2.91<br>- (42.0) 41 ~_. (74.0)<br>IEC320-C14<br>**----- End of picture text -----**<br> **==> picture [75 x 53] intentionally omitted <==** **----- Start of picture text -----**<br> Pin Function<br>1 Output +<br>2 Output +<br>3 Return*<br>4 Return*<br>Shell Ground<br>**----- End of picture text -----**<br> *Return is internally connected to Ground Power Cord, Order Part: UK - UK-MAINS-IEC European - EU-MAINS-IEC US - US-MAINS-IEC ## ~~**Notes**~~ 1. All dimensions shown in inches (mm). Tolerance is 0.04 (1.0) maximum, except output cable length. 2. Weight 1.57 lbs (710 g) approx. 3. Cable length is 47.2” ±0.8” (1200 ±20 mm) approx. 4. Output connector (Power Mini Din) mates with Kycon KPJ-4S or equivalent. 21-Oct-13
Updated at February 9, 2023
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →