VDS130

## **Vibration data source MQTT protocol** 

## VDS130 

## **SPECIFICATIONS** 

## **SENSOR INPUT** 

|**SENSOR INPUT**||
|---|---|
|**Channels**||
|**IEPE vibration**|4|
|**RPM**|1|
|**Connector**|screw terminal|
|**VIBRATION CHANNELS**||
|**Input sensitivity**|10, 25, 50, 100, 500, or 1000 mV/g|
|**Frequency response**|40 kHz(±5%)|
|**Power**|IEPE(20 V min, 3 mA)|
|**Input range**|±5 V / ±20 V selectable|
|**Coupling**|AC/DC selectable|
|**Input impedance**|320 kΩ|
|**Max sampling rate**|102.4 kHz|
|**RPM CHANNEL**||
|**Input range**|5 V TTL(±20 Vpeak)|
|**Measurement range**|0.5 Hz - 5 kHz|
|**Power**|5 V(max. 100 mA)|
|**VIBRATION OUTPUT**||
|**Acceleration frequency band,**|RMS: 2 Hz - 1 kHz, 10 Hz - 10 kHz, 2 kHz - 10 kHz1|
|**selectable**|peak: 2 Hz - 1 kHz, 10 Hz - 10 kHz, 2 kHz - 10 kHz|
|**Velocity frequency band,**|RMS: 2 Hz - 1 kHz¹, 10 Hz - 1 kHz¹, 10 Hz - 5 kHz1|
|**selectable**|peak: 2 Hz - 1 kHz, 10 Hz - 1 kHz, 10 Hz - 5 kHz|
|**Displacement frequency band,**|RMS: 2 Hz - 1 kHz¹, 10 Hz - 1 kHz1|
|**selectable**|peak: 2 Hz - 1 kHz, 10 Hz - 1 kHz|
|**Truepeak**|Fs@102.4 kHz|
|**Power spectrum, selectable**|1 kHz, 2 kHz, 5 kHz, 10 kHz, 20 kHz, 40 kHz|
|**Window**|rectangular, hanning, flat top|
|**Lines**|6400|
|**Time waveform length**|1 sec|
|**Other features**|crest factor, standard deviation|
|**COMMUNICATION**||
|**Protocol**|MQTT|
|**Digital output connector**|RJ45 Ethernetport|
|**Data transmission interval**||
|**Overall value**|min. 1 minute|
|**Time waveform**|min. 1 minute|
|**Power spectrum**|min. 1 minute|



## **Key features** 

- Compatible with IEPE accelerometers 

- MQTT digital output 

- Frequency bands align with ISO 10816-3, 20816-3 and 17243 guidelines 

- Multi functionality LED status indicators for VDS and sensors 

|**Sensor input connections**|**Sensor input connections**|
|---|---|
|_Connection_|_Function_|
|Channels 1-4||
|SHLD|shield|
|-|common|
|+|power/signal|
|RPM input||
|SHLD|shield|
|RPM IN|signal|
|RPM GND|g<br>ground|
|+5 V|power|



**Notes:** 1 Frequency bands align with ISO 17243 guidelines to assess the severity of machine tool spindle vibrations measured on the spindle housing or ISO 10816-3 and 20816-3 guidelines to assess the vibration of industrial machines 

Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. 

info@wilcoxon.com www.wilcoxon.com 

8435 Progress Drive Tel: +1 (301) 330-8811 Frederick, MD 21701 Fax: +1 (301) 330-8873 USA 

**Wilcoxon Sensing Technologies** 

An Amphenol Company 

99494   Rev.A1   01/26 

## **Vibration data source MQTT protocol** 

## VDS130 

## **SPECIFICATIONS** 

## **PHYSICAL & ENVIRONMENTAL** 

**==> picture [371 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Power requirement|24 VDC|
|Power consumption|10 W max.|
|Exterior material|aluminum (painted)|
|Reset, restore|push button|
|Self-test status|LED indicator|
|Operating temperature|–10 to +80 °C|
|Dimensions|120mm x 155mm x 34mm|
|Weight|420 grams|
|Mounting|optional back or side panel for DIN rail mounting|
|USB|3.0 Type-A|

**----- End of picture text -----**<br>


**==> picture [69 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
Back-panel for<br>DIN rail mounting.<br>Side-panel for DIN<br>rail mounting.<br>**----- End of picture text -----**<br>


## **DIMENSIONS** 

Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. 

info@wilcoxon.com www.wilcoxon.com 

Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 

8435 Progress Drive Frederick, MD 21701 USA 

**Wilcoxon Sensing Technologies** 

An Amphenol Company 

99494   Rev.A1   01/26