VCFP96M

## **FEATURES** 

- 3Ø True RMS (Voltage, Current) 

- 3Ø Power (Active, Reactive, Apparent), 

- Energy (Active, Reactive, Apparent) 

- Programmable CT/PT Primary/Secondary 

- CT Polarity Error Detection 

LISTED E188860 

- Variable Pulse width Selection 

- Single Phase Network with Phase Selection 

- Modbus RTU Communication (RS485) 

- Neutral Current Measurement 

## _Multifunction Meter_ 

- THD up to 31st Level . 

- Single Pulse Output / Demand 

- Phase Sequence Detection 

## **DISPLAY SPECIFICATION** 

Display 4 rows, LCD with backlight Digits 4 (Lowest 8 digits for energy display) Bargraph For Current representation 

## **INPUT SPECIFICATIONS** 

|Electrical Connection|3Ø - 3 wire, 3Ø - 4 wire, 2Ø - 3 wire, 1Ø - 2 wire|
|---|---|
|Input Voltage Range|11 to 300V AC, (Phase to Neutral)<br>19 to 519V AC(Phase to Phase)|
|Input Current Range<br>Frequency|Nominal 5A AC(Min-11mA, Max-6A)<br>45 to 65Hz|
|DisplayScrolling|Automatic / Manual(Programmable)|
|Power Consumption|8VA Max|
|DisplayReset|Programmable(For energy)|
|Resolution|For energy :|
||0 .01k, 0 .1k, 1k, 0 .01m, 0 .1m, 1m|
||(depending upon CT ratio x PT ratio)|
|Accuracy|For Power, Voltage,<br>Current : Auto resolution<br>For Power factor : 0 .001<br>Voltage (L-N / L-L) : ±0 .5% of F .S .<br>Power Factor ±0 .01 Current ±0 .5% F .S .|
||Frequency : ±0 .1% For L-N Voltage >20V|
||For L-L Voltage >35V|
||Power (Active, Reactive, Apparent) : 1%|
||Energy (Active, Reactive, Apparent): Class 1|
|MemoryRetention|10years(For energy)|
|Measuring Parameters|Voltage (L-L / L-N) (Individual / Average),|
||Current (I1, I2, I3) (Individual / Average),|
||Frequency, Power Factor (Individual /Total),|
||Active, Reactive & Apparent power|
||(Individual / Total),|
||Active, Reactive & Apparent Energy|
||(Total), Demand (Min / Max Active Power,|
||Min/Max Reactive Power,|
||Max Apparent Power), %THD up to 31st Level|
||Max Demand Current,|
||Neutral Current, Phase Sequence Detection|



## **OUTPUT SPECIFICATIONS** 

|Pulse Output|Voltage Range : External 24V DC max|
|---|---|
||Current Capacity : 100mA max|
||Pulse Width : 100 ms ± 5 ms|
|Communication|RS485 and MODBUS RTU|
|Interface and||
|Protocol||
|Communication|1 to 255|
|Address||
|Transmission|Half duplex|
|Mode||
|Transmission|500 meter maximum|
|Distance||
|Transmission|300, 600, 1200, 2400, 4800,|
|Speed|9600, 19200(in bps)|
|Parity|None, Odd, Even|
|StopBits|1 or 2|
|Response Time|100 ms (max and independent of|
||baud rate)|



_Diversified Electronics     800.727.5646    atcdiversified.com_ 

**142** 

## **AUXILIARY SUPPLY SPECIFICATIONS** 

Supply Voltage 100 to 240V AC, -15% +12%, 50/60 Hz, (±5%) 

## **SETTABLE PARAMETERS** 

CT Primary 1/5A to 10kA (Programmable for any value) CT Secondary 1/5A (Programmable) PT Primary 100V to 500kV (Programmable for any value) PT Secondary 100V to 500V (Programmable for any value) 

## **ENVIRONMENTAL SPECIFICATIONS** 

Temperature Operating Temperature : -10 to 55°C Storage Temperature : -20 to 75°C 

Humidity 

(non-condensing) Up to 85% RH 

## **MECHANICAL SPECIFICATIONS** 

Mounting Panel mount Weight 318 gms 

## **DIMENSIONS** 

**==> picture [253 x 85] intentionally omitted <==**

**----- Start of picture text -----**<br>
90.5 91.5<br>99<br>99 50 91.5<br>5<br>Front bezel Side view Panel cutout<br>**----- End of picture text -----**<br>


## **TERMINAL CONNECTIONS** 

**==> picture [176 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
N<br>L<br>+ +<br>PULSE O/P RS485<br>L1 L<br>L2 O<br>L3 A<br>N D<br>S1 S2 S1 S2 S1 S2 N V1 V2 V3<br>I1 I2 I3<br>**----- End of picture text -----**<br>


**==> picture [263 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable Size (mm [2] ): 0.5 to 2.5 ; Tightening Torque (N-m): 0.68 to 0.79<br>**----- End of picture text -----**<br>


## **COMPLIANCE** 

|**COMPLIANCE**|**COMPLIANCE**|**COMPLIANCE**|
|---|---|---|
|Applicable EMI / EMC Standards|||
|Product Standard : IEC 61326-1|||
|Category||Standards Compliance|
|ESD Immunity|IEC 61000-4-2|Level IV (Air discharge : 15kV),<br>(Contact Discharge : -8kV|
|Surge Immunity|IEC 61000-4-5|+/- 2kV common mode, (Line to ground)<br>+/- 1kV diferential mode,(Line to Line)|
|Radiated Susceptibility|IEC 61000-4-3|Level III, 80 to 1000MHz (10V/m)<br>Level II, 1 4GHz to 2GHz (3V/m)<br>Level I, 2GHz to 2 7GHz(1V/m)|
|Conducted Susceptibility|IEC 61000-4-6|Level II(3V/m)|
|Voltage Dips and<br>Interruptions|IEC 61000-4-11|Dips : 0% residual voltage /<br>1 cycle (Criteria B), 40% residual voltage /<br>10 cycles 50Hz / 12 cycles 60Hz (Criteria C)<br>70% residual voltage / 25 cycles<br>50Hz / 30 cycles 60Hz (Criteria C)<br>Interruptions : 0% residual voltage /<br>250 cycles 50Hz / 300 cycles 60Hz<br>(Criteria C)|
|Conducted Emission|CISPR-11||
|Radiated Emission|CISPR-11||
|Electrical Fast Transient|IEC 61000-4-4|Level III (2kV)|



## **ORDERING INFORMATION** 

Part Number: VCFP96M 

_Diversified Electronics     800.727.5646    atcdiversified.com_ 

**143**