V23135W1001A309

Automotive Relays High Current Devices 

## **Star Point Relay SPR** 

## n **Full, symmetric star-point disconnection of an electric power steering motor** 

- n **Limiting continuous current 90A at 85°C** 

- n **Disconnection of high over-currents up to 200A in 12VDC and up to 60A in 36VDC power nets** 

- n **Contact arrangement fulfills 42VDC power net requirements** 

- n **Optimized dimensions: lhw (in mm) 32x18.5x18** 

- n **Resistant against high ambient temperature up to 125°C** 

- n **Contact resistance typ. <2mΩ per path for load current 20A after fritting** 

Typical applications All EPA/EPS applications. 

F135_fcw3b 

|~~**Contact Data**~~||
|---|---|
|Contact arrangement|1 form 3, 3 NO|
|Rated voltage<br>12VDC<br>Max. switching voltage<br>Rated current<br>Limiting continuous current1)<br>23°C|12VDC<br>depends on load parametersA)<br>120A<br>120A|
|85°C|90A|
|125°C|60A|
|Limiting breaking current<br>200A|200A2)|
|Breaking capacity max.<br>>10 ops. at 200A|>10 ops. at 200A|
|Contact material|AgNi0.15|
|Contact style|triple|
|Min. recommended contact load5)|1A at 5VDC|
|Initial voltage drop, after fritting with 90A for 30s  <180mV at 90A|Initial voltage drop, after fritting with 90A for 30s  <180mV at 90A|
|Operate/release time max.3)|<20/10ms|
|Bounce time max.3)|see footnote3)|
|Electrical endurance||
|120A, dry switching4)at 23°C, 500ms on/off >2x105ops.||
|Mechanical endurance|>106ops.|



## ~~**Contact Data** (continued)~~ 

- A)  Please contact TE relay application engineer. 

- 1)  Max. terminal temperatures up to 180°C are allowed. Final temperatures depend on the leadframe layout. 

- 2)  Without relay coil voltage: suppression component (see Application Note “Automotive Applications”. 

- 3)  Release and bounce time depend on component in parallel to the coil, please contact application support. 

- 4)  Load only carried, not switched! 

- 5) See Application Note “Diagnostics of Relays” 

## ~~**Coil Data**~~ 

|Coil voltage range|||12VDC||
|---|---|---|---|---|
|Max. coil temperature|||<180°C||
|**Coil versions, DC coil**|||||
|Coil<br>Rated|Operate|Release|Coil|Rated coil|
|code<br>voltage|voltage|voltage|resistance|power|
|VDC|VDC|VDC|Ω±10%|W|
|001<br>12|6.4|1|150|0.96|
|002<br>10|5.2|0.8|97|1.03|



All figures are given for coil without preenergization, at ambient temperature +23°C. 

## **Max. DC load breaking capacity** 

**==> picture [250 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000<br>=yNa<br>~\, Ww \<br>. ». isi ON, ».<br>\ \, \, NG \.<br>= ASHI San<br>100<br>S S im ~ = “s .<br>caeORESnesseset els<br>i SOO SE<br>10<br>1 10 100 1000<br>Load Current [A]<br>Load Voltage [V]<br>**----- End of picture text -----**<br>


Load limit Curve II: valid for load path through pin 4 and pin 5, no coil suppression used. 

## **Coil operating range** 

**==> picture [271 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
10<br>9<br>8 Uop 001 (E=0V) L— LL<br>= Te<br>7<br>6 -——- — Uop 002 (E=0V)<br>5 T SEF T ESSTe =<br>4<br>3<br>os<br>2<br>Urel 001<br>1 nn eeea<br>0 -40 ers -20 0 20 23° 40 Tt 60 |lhlhUhUdTl Urel 00280 100 Ud] 120 t hd] 140 160 180<br>Coil Temperature [°C]<br>Does not take into account the temperature rise due to the contact current<br>E = pre-energization<br>Voltage [V]<br>**----- End of picture text -----**<br>


1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

10-2012, Rev. 1012 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

## Automotive Relays High Current Devices 

## **Star Point Relay SPR** (Continued) 

~~**Insulation Data**~~ **Terminal Assignment** Initial dielectric strength between contact and coil 500VACrms ~~**Other Data**~~ 2 3 4 5 EU RoHS/ELV compliance compliant Ambient temperature -40°C to 125°C Cold storage, IEC 60068-2-1 2000h; -40°C Dry heat, IEC 60068-2-2 500h; +135°C Temperature cycling (shock), IEC 60068-2-14, Na 500 cycles; -40/+135°C Damp heat cyclic, IEC 60068-2-30, Db, Variant 1 83 cycles (2000h) 25°C/55°C/93%RH Flowing mixed gas corrosion test, 1 IEC 60068-2-60, Ke, method 1 10 days Degree of protection IP67 (IEC 60529), RT III (IEC 61810) Vibration resistance (functional), IEC 60068-2-64 (random) energized 20 to 1000Hz >6g ms IEC 60068-2-64 (random) not energized 20 to 1000Hz >4g ms Shock resistance (functional), IEC 60068-2-27 (half sine) 6ms, energized >40g IEC 60068-2-27 (half sine) 6ms, not energized >10g Mounting welding process on leadframe Weight approx. 30g (1.06oz) Packaging unit 357 pcs. 1 form 3, 3 NO 

## **Dimensions** 

**View of the terminals** Bottom view 

- 1)  Epoxy at terminals exceeds max. 0.9mm over coverage. 

- 2)  Permanent acceptable deformation 0.25mm respectively 0.5mm temporarily. 

- Maximum permissible thermal load of the terminals during the resistance welding process depends on leadframe design. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

10-2012, Rev. 1012 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Automotive Relays High Current Devices 

## **Star Point Relay SPR** (Continued) 

|**Product code structure**|**Product code structure**|||Typical product code|**V23135**|**-W**|**1**|**001**|**-A3**|**09**|
|---|---|---|---|---|---|---|---|---|---|---|
|**Type**|||||||||||
|**V23135**Star Point Relay|||||||||||
|**Terminal and enclosure**|**Terminal and enclosure**||||||||||
|**W**|Welding version, sealed||||||||||
|**Design**|||||||||||
|**1**|Single relay||||||||||
|**Coil version**|||||||||||
|**001**|Standard|**002**|Sensitive||||||||
|**Contact type and material**|**Contact type and material**||||||||||
|**A3**|Standard, AgNi0.15||||||||||
|**Contact arrangement**|||||||||||
|**09**|Standard (triple make)||||||||||



**Product code Terminal and enclosure Design Coil Contact Arrangement Part number** V23135-W1001-A309 Welding version, sealed Single relay 12VDC Standard, AgNi0.15 1 form 3, 3 NO 1-1414704-0 V23135-W1002-A309 10VDC 1-1414705-0 ~~—~~ eee—SSS ae 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

10-2012, Rev. 1012 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions