V23134A4052X544-EV-CBOX

Automotive Relays Plug-in Mini ISO Relays 

## **Shrouded Power Relay F4** 

- **Pin assignment similar to ISO 7588 part 1** 

- **Plug-in terminals** 

- **Customized versions on request** 

- **Integrated components (e.g. resistor, diode)** 

- **Customized marking** 

## Typical applications 

Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. 

**==> picture [56 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
F134-F4_Shrouded_tbw1<br>**----- End of picture text -----**<br>


## ~~**Contact Data**~~ 

**==> picture [250 x 215] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||
|---|---|---|---|---|
|Contact arrangement|1 form C, 1 CO|
|Rated voltage|12VDC|24VDC|
|Limiting continuous current,|
|NO/NC|
|23°C|60/45A|
|85°C|40/30A|
|125°C|17/12A|
|Limiting making current|[1)]|120/45A|
|Limiting breaking current|60/40A|20/15A|
|Limiting short-time current|
|overload current, ISO 8820-3|[2)]|1.35 x 40A, 1800s|
|2.00 x 40A, 60s|
|6.00 x 40A, 1s|
|Jump start test, ISO 16750-1|24VDC for 5min,|
|conducting nominal current at 23°C|
|Contact material|silver based|
|Min. recommended contact load|[3)]|1A at 5VDC|
|Initial voltage drop at 10A,|
|NO contact, typ./max.|15mV/200mV|
|NC contact, typ./max.|20mV/250mV|
|Frequency of operation at nominal load|6 ops./min (0.1Hz)|
|Operate/release time typ.|7/2ms|[4)]|
|Electrical endurance|[5)]|>1x10|[5]|ops.|
|resistive load, NO contact|40A, 14VDC|20A, 28VDC|

**----- End of picture text -----**<br>


## ~~**Contact Data** (continued)~~ 

Mechanical endurance >1x10[6] ops. 

- 1)  The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 

- 2)  Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 

- 3)  See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 

- 4)  For unsuppressed relay coil. Any parallel device to the coil will increase the release time. 

- 5)  Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when used for inductive loads. 

## ~~**Coil Data**~~ 

**==> picture [253 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|Rated coil voltage|12/24VDC|
|Coil versions, DC coil|
|Coil|Rated|Operate|Release|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|[6)]|power|[6) ]|
|VDC|VDC|VDC|Ω±10%|W|
|052|12|7.2|1.6|90|1.6|
|064|24|14.4|2.4|360|1.6|

**----- End of picture text -----**<br>


- 6) Without components in parallel. 

All figures are given for coil without pre-energization, at ambient temperature +23°C. 

## **Max. DC load breaking capacity** 

## **Coil operating range** 

**==> picture [28 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
TEVF4_OVR1<br>**----- End of picture text -----**<br>


Load limit curve 1: arc extinguishes during transit time (changeover contact). Does not take into account the temperature rise due to the contact current Load limit curve 2: safe shutdown, no stationary arc (make contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. E = pre-energization. 

1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

12-2017, Rev. 1217 www.te.com © 2017 TE Connectivity. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Automotive Relays Plug-in Mini ISO Relays 

## **Shrouded Power Relay F4** (Continued) 

|~~**Insulation Data**~~||
|---|---|
|Initial dielectric strength||
|between open contacts|500Vrms|
|between contact and coil|500Vrms|
|between adjacent contacts|500Vrms|
|||
|~~**Other Data**~~||
|EU RoHS/ELV compliance|compliant|
|Protection to heat and fire according UL94|re according UL94<br>UL94-HB or better|
|Ambient temperature|-40 to 125°C|
|Category of environmental protection,||
|IEC 61810|RT I (dustproof),|
|RT III (weatherproof – shrouded)||
|Degree of protection, IEC 60529<br>IP54 (dustproof),<br>IP67 (weatherproof),<br>only with special connector||
|Vibration resistance (functional)||
|IEC 60068-2-6 (sine sweep)|10 to 500Hz, min. 5g7)|
|Shock resistance (functional)||
|IEC 60068-2-27 (half sine)|11ms, min. 20g7)|
|Drop test, free fall, IEC 60068-2-32|1m onto concrete|



|~~**Other Data**(continued)~~||
|---|---|
|Terminal type|plug-in, QC|
|Cover retention||
|axial force|150N|
|pull force|150N|
|push force|200N|
|Terminal retention||
|pull force|100N|
|push force|100N|
|resistance to bending|10N8)|
|force applied to side|10N8)|
|torque|0.3Nm|
|Weight|approx. 60g (2.1oz)|
|Packaging unit|110 pcs.|
|7)  No change in the switching state >10µs. Valid for NC contacts, NO contact values<br>significantly higher.||



- 8)  Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. 

|~~**Accessories**~~||
|---|---|
|For details see datasheet|Connectors for Mini,|
||Mini (Shrouded) and Maxi ISO Relays|



## **Terminal Assignment** 

CO COD COR 1 form C, 1 CO 1 form C, 1 CO with diode 1 form C, 1 CO with resistor 85 87 87a 85 87 87a 85 87 87a ~~Sy~~ e ~~y~~ e ~~y~~ 86 30 86 30 86 30 **Dimensions** Product codes V23134-A4052-X543 and V23134-A4064-X550 View of the terminals (bottom view) 

## **Dimensions** 

Product codes V23134-A4052-X543 and V23134-A4064-X550 

**==> picture [253 x 257] intentionally omitted <==**

**----- Start of picture text -----**<br>
18.6<br>9.0<br>22.5<br>6.4<br>aetne<br>0.39<br>MAX.<br>11.5 12.25<br>MAX. 7.25<br>EEE<br>| 1<br>4.25 4.1 MAX.<br>6.3 TYP.<br>32.0 MAX.<br>25.0 MAX. 4.0<br>“Te y<br>TE1347-82<br>12-2017, Rev. 1217 Datasheets and product specification ac-<br>www.te.com cording to IEC 61810-1 and to be used only<br>© 2017 TE Connectivity. together with the ‘Definitions’ section.<br>**----- End of picture text -----**<br>


Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

**==> picture [136 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
32.0 MAX.<br>17.9<br>8.4<br>+ || 1 K 8.0<br>Go er<br>4.5<br>16.8<br>+<br>87A<br>30<br>85 86<br>87<br>**----- End of picture text -----**<br>


Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

2 

Automotive Relays Plug-in Mini ISO Relays 

## **Shrouded Power Relay F4** (Continued) 

## **Dimensions** 

Product codes V23134-A4052-X544, V23134-A4052-X549 and View ~~of the termin~~ als (bottom view) V23134-A4064-X551 

**==> picture [510 x 344] intentionally omitted <==**

**----- Start of picture text -----**<br>
16.6 ±0.15<br>6.6<br>9.0<br>‘tek,<br>18.5 ±0.25  45.0 ±0.5 30<br>85<br>87a<br>aos (in| 17.9<br>4.20 ±0.15 8.4 87 86<br>11.5 MAX.<br>8.0<br>6.3 19.7 ±0.15 7.5 ±0.45 11.50 ±0.15 16.8<br>12.0 ±0.38<br>36.1 MAX. 36.1 MAX. 7.0 REF.<br>SRF SE L<br>TE1348-91<br>Product code structure  Typical product code  V23134  -A  4  052  -X544<br>Type<br>V23134  Power Relay F4<br>Contact arrangement<br>A  1 form C, 1 CO<br>Cover<br>4  Shrouded with bracket<br>Coil<br>052  12VDC  064   24VDC<br>Terminal / arrangement<br>Xnnn  Customized (nnn: version number)<br>———"  J<br>**----- End of picture text -----**<br>


**-X544** 

|**Product**<br>**code**|**Equivalent to**|**Arran-**<br>**gement**|**Cover**|**Coil**<br>**suppression**|**Circuit1)**|**Coil**|**Contact**<br>**material**|**Termi-**<br>**nals**|**Part**<br>**number**|
|---|---|---|---|---|---|---|---|---|---|
|V23134-A4052-X543<br>V23134-A4052-X544<br>V23134-A4052-X549<br>V23134-A4064-X551<br>V23134-A4064-X550|V23134-A4052-X543<br>VF4A-55F11-S01<br>(8-1393305-7)<br>V23134-A4052-X544<br>VF4A-65F11-S01<br>(9-1393305-5)<br>V23134-A4052-X549<br>VF4A-65F11-S05<br>(9-1393305-6)<br>V23134-A4064-X551<br>VF4A-65H11-S08<br>(9-1393305-9)<br>V23134-A4064-X550<br>VF4A-55H11-S05<br>(8-1393305-9)|1 form C,<br>1 CO|Dustproof|Dustproof<br>Resistor 680Ω|COR<br>12VDC<br>COD|12VDC|Silver<br>based|Plug-in,<br>QC|2-1904131-9<br>3-1904131-5<br>3-1904131-3<br>3-1904131-7<br>3-1904131-6|
||||Weather-<br>proof|||||||
|||||Diode<br>(cathode 86)||||||
|||||Resistor 2700Ω|COR<br>24VDC<br>COD|24VDC||||
||||Dustproof|Diode<br>(cathode 86)||||||



1) See terminal assignment diagrams. 

Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

12-2017, Rev. 1217 www.te.com © 2017 TE Connectivity. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions