UZG1V220MCL1GB

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

3.95mmLmax. Chip Type, Wide Temperature Range **UZG** 

Chip type with 3.95mmLmax height. Operating over wide temperature range of –40 to +105°C.to +105°C.. 

temperature range of –40 to +105°C.to +105°C.. Designed for surface mounting on high density PC board. **UZT** Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Smaller AEC-Q200 Qualified. Please contact us for details. — **UZG** CT 

## Specifications 

Item Performance Characteristics ~~RR~~ Category Temperature Range –40 to +105°C Rated Voltage Range 6.3 to 50V ~~—~~ Rated Capacitance Range 1 to 100µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C,  leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. ~~SS~~ Rated voltage  (V) 6.3 10 16 25 35 50 120Hz   20°C Tangent of loss angle (tan δ) ~~eee~~ tan  δ (max.) 0.38 0.32 0.20 0.16 0.14 0.14 Rated voltage  (V) 6.3 10 16 25 35 50 120Hz Stability at Low Temperature Impedance ratio Z(–25°C) / Z(+20°C) 6 5 3 3 3 3 ~~Poe~~ ZT / Z20 (max.) Z(–40°C) / Z(+20°C) 10 ~~eee~~ 10 6 6 4 4 The specifications listed at right shall be met when the Capacitance change Within ±30% of the initial capacitance value Endurance capacitors are restored to 20°C after the rated voltage is tan δ 300% or less than the initial specified value applied for 1000 hours at 105°C. Leakage current Less than or equal to the initial specified value ~~———~~ Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~ee~~ Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which ismaintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and Capactan δ itance change Within ±10% of the initial capacitance valueLess than or equal to the initial specified value restored to 20°C. Leakage current Less than or equal to the initial specified value ~~SE~~ Marking Black print on the case top. ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) Chip Type Type numbering system  (Example : 16V 10µF) Positive Voltage (C : 16V) Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Lot No. Series 0.3 max. C±0.2 U Z G 1 C 1 0 0 M C L 1 G B (mm) Taping code φD 4 5 6.3 A 1.8 2.1 2.4 Configuration B 4.3 5.3 6.6 Capacitance tolerance (±20%) C 4.3 5.3 6.6 E 1.0 1.3 2.2 Rated capacitance (10µF) : Capacitance Lr 3.90 +0.05–0.2 ~~e~~ a 0.5 to 0.8 l ~~e~~ ic Negative | ~~Bees~~ Rated voltage (16V) Voltage Series name V 6.3 10 16 25 35 50 Type ~~EEE~~ Code ~~i~~ j A C E ~~nis~~ V H ~~one~~ Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more ~~————_—_—<—_—=—_——~~ Coefficient 0.70 1.00 1.17 1.36 1.50 

~~[fe~~ Dimension table in next page. 

CAT.8100M [ 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UZG** 

## Dimensions 

**==> picture [512 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（ [µA] ） Rated Ripple（mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （105℃/120Hz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|Rated Ripple<br>（mArms）<br>（105℃/120Hz）|Part Number|
|---|---|---|---|---|---|---|
||||||||
|6.3<br>（0J）|22|4×3.9|0.38|3|19|UZG0J220MCL1GB|
||33|5×3.9|0.38|3|26|UZG0J330MCL1GB|
||47|5×3.9|0.38|3|32|UZG0J470MCL1GB|
||100|6.3×3.9|0.38|6.3|52|UZG0J101MCL1GB|
|10<br>（1A）|22|5×3.9|0.32|3|24|UZG1A220MCL1GB|
||33|5×3.9|0.32|3.3|30|UZG1A330MCL1GB|
||47|6.3×3.9|0.32|4.7|40|UZG1A470MCL1GB|
|16<br>（1C）|10|4×3.9|0.20|3|16|UZG1C100MCL1GB|
||22|5×3.9|0.20|3.52|26|UZG1C220MCL1GB|
||33|6.3×3.9|0.20|5.28|35|UZG1C330MCL1GB|
||47|6.3×3.9|0.20|7.52|44|UZG1C470MCL1GB|
|25<br>（1E）|4.7|4×3.9|0.16|3|11|UZG1E4R7MCL1GB|
||10|5×3.9|0.16|3|20|UZG1E100MCL1GB|
||22|6.3×3.9|0.16|5.5|33|UZG1E220MCL1GB|
||33|6.3×3.9|0.16|8.25|42|UZG1E330MCL1GB|
|35<br>（1V）|4.7|4×3.9|0.14|3|13|UZG1V4R7MCL1GB|
||10|5×3.9|0.14|3.5|22|UZG1V100MCL1GB|
||22|6.3×3.9|0.14|7.7|36|UZG1V220MCL1GB|
|50<br>（1H）|1|4×3.9|0.14|3|5.4|UZG1H010MCL1GB|
||2.2|4×3.9|0.14|3|9.6|UZG1H2R2MCL1GB|
||3.3|4×3.9|0.14|3|12|UZG1H3R3MCL1GB|
||4.7|5×3.9|0.14|3|16|UZG1H4R7MCL1GB|
||10|6.3×3.9|0.14|5|26|UZG1H100MCL1GB|



For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100M