UWX1E101MCL1GB

**ALUMINUM ELECTROLYTIC CAPACITORS** 

## 5.5mmL Chip Type 

## **WX** series 

## Chip type with 5.5mm height. 

Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Load life of 2000 hours at 85°C. 

| Adapted to the RoHS directive (2002/95/EC). **WT WJ** High High Temperature Temp reflow **WX** Bi-polarized **WP** eo, | of “ Smaller : Specifications LU **ZS** Item Performance Characteristics cc Category Temperature Range –40 ~ +85°C Rated Voltage Range 4 ~ 50V IN Rated Capacitance Range 0.1 ~ 330µF Capacitance Tolerance ±20% at 120Hz, 20°C a Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) ,whichever is greater. 2N72 Measurement frequency : 120Hz,  Temperature : 20°C tan  δ Rated voltage (V) 4 6.3 10 16 25 35 50 a ~~eeeES~~ tan  δ (MAX.) 0.35 (0.40) 0.26 (0.30) 0.20 (0.24) 0.16 (0.19) 0.14 (0.16) 0.12 (0.14) Measurement frequency : 120Hz0.12 (0.14) Values in ( ) applicable to WR, φ3 case size. Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 8 4 4 3 3 ~~==~~ —— = —— ee After 2000 hours' application of rated voltage Capacitance change Within ±20% of initial value (Within ±25% for 4 V and φ3,WR series units) Endurance at 85°C, capacitors meet the characteristic tan δ 200% or  less of initial specified value requirements listed at right. Leakage Current Initial specifed value or less Shelf Life After leaving capacitors under no load at 85°C for 1000 hours,  they meet the specified ——— WN". value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value Resistance to soldering for 30 seconds.  After removing from the hot plate and restored tan δ Initial specified value or less heat at room temperature,  they meet the characteristic requirements Leakage current Initial specified value or less listed at right. ~~>~~ Marking Black print on the case top. 

Chip Type 

**==> picture [528 x 170] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type numbering system (Example : 16V 10µF)<br>Positive<br>Capacitance<br>- 2 Lot No. 1 Voltage Plastic platform 1 2 3 4 5 6 7 8 9 10 11 12 13 14<br>r 0.3 MAX. C±0.2 U W X moo) 1 C 1 0 0 M C L 1 G B<br>; Taping code<br>Size code<br>Configuration φD Code<br>Capacitance toleranc (±20%) 3 2<br>5.4 +0.1–0.2 Rated Capacitance (10µF) 4 ~ 8 1<br>|__ | _ 0.5 ~ 0.8 |LA 5 Negative<br>Rated voltage (16V)<br>(mm) Series name<br>φD 3 4 5 6.3 8<br>A 1.5 1.8 2.1 2.4 3.3 Type<br>B 3.3 4.3 5.3 6.6 8.3 • [In the case of size ][φ][3 in (   ),parentheses, use WX in the 2nd and 3rd]<br>C 3.3 4.3 5.3 6.6 8.3 digit and put a 2 in the 12th digit of type numbering system.<br>E 0.8 1.0 1.3 2.2 2.3<br>    1.  Voltage mark for 6.3V is   6V  .<br>0.5 MAX.<br>0.2<br>X2 10 16V D0.5φ± B0.2± E 0.2   A±<br>±<br>A<br>**----- End of picture text -----**<br>


- In case of marking for φ3 units,  “V” for rated voltage is omitted. 

2.  In case of marking for φ3 units,  Lot No.is expressed by a digit (month code). 

Dimension table in next page. fe 

—— CAT.8100U 

## **ALUMINUM ELECTROLYTIC CAPACITORS** 

## **WX** series 

## Dimensions 

**==> picture [512 x 256] intentionally omitted <==**

**----- Start of picture text -----**<br>
V 4 6.3 10 16 25 35 50<br>Cap. (µF)  Code 0G 0J 1A 1C 1E 1V 1H<br>0.1 0R1 4 (3) 1.0<br>0.22 R22 4 (3) 2.0<br>0.33 R33 4 (3) 2.8<br>0.47 R47 4 (3) 4.0<br>1 010 4 (3) 8.4 (8.0)<br>2.2 2R2 3 8.4 4 (3) 13 (10)<br>3.3 3R3 3 10 4 17<br>4.7 4R7 4 (3) 16 (12)  4 18 5 20 (18)<br>10 100 4 (3) 23 (18)  5 27 (24)  5 29 (24)  6.3 33 (30)<br>22 220 3 019 4 (3) 28 (21)  5 33 (30)  5 37 (30)  6.3 42 (38)  6.3 46 (39)  8 52 (43)<br>33 330 4 028 5 37 (34)  5 41 (34)  6.3 49 (44)  6.3 52 (46)  8 62 (53)  8 71<br>47 470 4 033 5 45 (40)  6.3 52 (47)  6.3 58 (52)  8 70 (60)  8 80<br>56 560 5 042 6.3 52 (46)  6.3 57 (50)  6.3 63 (57)  8 76 (65)<br>100 101 5 056 6.3 70 (47) 6.3 76 (54) 6.3 86 8 110<br>150 151 6.3 079 6.3 71 8 111 (76)<br>220 221 6.3 096 8 110 (74)  8 135 Case size Rated<br>330 331 8 145 8 170 φ D (mm) ripple<br>(   ) is also available with φ3mm upon request. Rated Ripple  (mA rms) at 85°C 120Hz<br>• [In the case of size ][φ][3 in (   ),parentheses, use WX at 2nd and 3rd digit and put] 2 at the 12th digit of type numbering system. (   ) = φ3 units and WR Series<br>Size φ4 is available for capacitors marked.   "    "<br>Size φ5 is available for capacitors marked.   "    " In such a case,   W R will be put at 2nd and 3rd digit of type numbering system.<br>Size φ6.3 is available for capacitors marked.   "    " }<br>**----- End of picture text -----**<br>


## Frequency coefficient of rated ripple current 

|Frequency|50 Hz|120 Hz|300 Hz|1 kHz|10 kHz~|
|---|---|---|---|---|---|
|Coefficient|0.70|1.00|1.17|1.36|1.50|
|Taping specifications are given in page 24.<br>Recommended land size, soldering by reflow are given<br>in page 25<br>Please select UR(p.62), UG(p.67) series if high C/V<br>products are reqired.<br>Please refer to page 3 for the minimum order quantity.||||||
|Taping specifications are given in page 24.<br>Recommended land size, soldering by reflow are given<br>in page 25<br>Please select UR(p.62), UG(p.67) series if high C/V<br>products are reqired.<br>Please refer to page 3 for the minimum order quantity.||||||



CAT.8100U