UWD1C471MCL1GS

SMD Aluminium Electrolytic Capacitor, Radial Can - SMD, 470 µF, 16 V, Polar

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: NICHICON
Product type:
ESR: -000ohm
SVHC: No SVHC (25-Jun-2025)
Polarity: Polar
Capacitance: 470µF
Voltage(DC): 16V
Product Range: UWD Series
Product Width: -
Qualification: -
Product Height: 10mm
Product Length: -
Ripple Current: 450mA
Product Diameter: 8mm
Capacitor Terminals: Solder
Capacitance Tolerance: ± 20%
Lifetime @ Temperature: -
Capacitor Case / Package: Radial Can - SMD
Operating Temperature Max: 105°C
Operating Temperature Min: -55°C

Delivery and price
Units per pack	500
Price	0.159 €
Current stock	10+
Lead time	30 days

Datasheet

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UWD** 

Chip Type, Low Impedance High Temperature (260°C)  Reflow 

Corresponding with 260°C peak reflow soldering 

Recomended reflow condition : 260°C peak 5 sec. 230°C over 60 sec. 2 times (φ10 × 10 : 1 time) Chip type, low impedance temperature range up to +105°C. **U** ~~**W**~~ **D** Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). High Temperature AEC-Q200 Qualified. Please contact us for details. Reflow ~~a~~ **UUD** 

Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 50V ~~—_—— _ __~~ Rated Capacitance Range 1 to 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. ~~es~~ Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan  δ (max.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) (    ) is φ8 over ~~ee a~~ Measurement frequency : 120Hz ~~eee~~ Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z(–25°C) / Z(+20°C) 3 2 2 2 2 2 ZT / Z20 (max.) Z(–55°C) / Z(+20°C) 5 4 4 3 3 3 ~~.—————_—_eee~~ The specifications listed at right shall be met Capacitance change Within ±30% of the initial capacitance value Endurance when the capacitors are restored to 20°C after the tan δ 200% or less than the initial specified value rated voltage is applied for 5000 hours (2000 Leakage current Less than or equal to the initial specified value hours for φD = 4, 5 and 6.3) at 105°C. ~~a a~~ Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic Catan pδacitance change Within ±10% of the initial caLess than or equal to the initial spacitance valuepecified value heat requirements listed at right when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. ~~_ |COC~~ 

※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) 

> Chip Type Type numbering system  (Example : 16V 22µF) (φ4 to φ6.3) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 

> Plastic platform U W D 1 C 2 2 0 M C L 1 G S Voltage (C:16V) Series 0.3 max. C±0.2 ~~a~~ Taping code Configuration Capacitance tolerance (±20%) Lot No. Capacitance L±0.3 H Negative Rated capacitance (22µF) Rated voltage (16V) Series name ~~“~~ O D ~~e es~~ | ~~=~~ Type (φ8,φ10) Positive Plastic platform Voltage (V:35V)Trade mark Series 0.3 max. C±0.2 φ D × L 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10(mm) A 1.8 2.1 2.4 2.4 2.9 3.2 < ~~r~~ J ~~4~~ . a B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 O Lot No. Capacitance ~~f~~ L±0.5 H Negative HL 0.5 to 0.85.8 0.5 to 0.85.8 0.5 to 0.85.8 0.5 to 0.87.7 0.8 to 1.110 0.8 to 1.110 |__ ~~_ +}~~ \S 6 a Voltage Frequency coefficient of rated ripple current V 6.3 10 16 25 35 50 Frequency 50 Hz 120 Hz 300 Hz 1 kHz      10 kHz or more Code j A C E V H Coefficient 0.35 0.50 0.64 0.83 1.00 ~~EEE —~~ 

Dimension table in next page. ~~fe~~ 

—— CAT.8100M 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UWD** 

## Dimensions 

**==> picture [512 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（ [µA] ） Impedance（Ω）max. Rated Ripple（mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） （105℃/100kHz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|Impedance（Ω）<br>max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（105℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|
|||||||||
|6.3<br>（0J）|27|4×5.8|0.26|3|1.80|80|UWD0J270MCL1GS|
||33|5×5.8|0.26|3|0.76|150|UWD0J330MCL1GS|
||47|5×5.8|0.26|3|0.76|150|UWD0J470MCL1GS|
||56|5×5.8|0.26|3.528|0.76|150|UWD0J560MCL1GS|
||68|6.3×5.8|0.26|4.284|0.44|230|UWD0J680MCL1GS|
||100|6.3×5.8|0.26|6.3|0.44|230|UWD0J101MCL1GS|
||150|6.3×5.8|0.26|9.45|0.44|230|UWD0J151MCL1GS|
||220|6.3×5.8|0.26|13.86|0.44|230|UWD0J221MCL1GS|
||330|6.3×7.7|0.26|20.79|0.34|280|UWD0J331MCL1GS|
||470|8×10|0.28|29.61|0.17|450|UWD0J471MCL1GS|
||680|8×10|0.28|42.84|0.17|450|UWD0J681MCL1GS|
||1000|10×10|0.28|63|0.09|670|UWD0J102MCL1GS|
||1500|10×10|0.28|94.5|0.09|670|UWD0J152MCL1GS|
|10<br>（1A）|22|4×5.8|0.20|3|1.80|80|UWD1A220MCL1GS|
||27|5×5.8|0.20|3|0.76|150|UWD1A270MCL1GS|
||33|5×5.8|0.20|3.3|0.76|150|UWD1A330MCL1GS|
||47|6.3×5.8|0.20|4.7|0.44|230|UWD1A470MCL1GS|
||56|6.3×5.8|0.20|5.6|0.44|230|UWD1A560MCL1GS|
||68|6.3×5.8|0.20|6.8|0.44|230|UWD1A680MCL1GS|
||100|6.3×5.8|0.20|10|0.44|230|UWD1A101MCL1GS|
||150|6.3×5.8|0.20|15|0.44|230|UWD1A151MCL1GS|
||220|6.3×7.7|0.20|22|0.34|280|UWD1A221MCL1GS|
||330|8×10|0.24|33|0.17|450|UWD1A331MCL1GS|
||470|8×10|0.24|47|0.17|450|UWD1A471MCL1GS|
||680|10×10|0.24|68|0.09|670|UWD1A681MCL1GS|
||1000|10×10|0.24|100|0.09|670|UWD1A102MCL1GS|
|16<br>（1C）|15|4×5.8|0.16|3|1.80|80|UWD1C150MCL1GS|
||22|5×5.8|0.16|3.52|0.76|150|UWD1C220MCL1GS|
||27|5×5.8|0.16|4.32|0.76|150|UWD1C270MCL1GS|
||33|6.3×5.8|0.16|5.28|0.44|230|UWD1C330MCL1GS|
||47|6.3×5.8|0.16|7.52|0.44|230|UWD1C470MCL1GS|
||56|6.3×5.8|0.16|8.96|0.44|230|UWD1C560MCL1GS|
||68|6.3×5.8|0.16|10.88|0.44|230|UWD1C680MCL1GS|
||100|6.3×5.8|0.16|16|0.44|230|UWD1C101MCL1GS|
||150|6.3×7.7|0.16|24|0.34|280|UWD1C151MCL1GS|
||220|6.3×7.7|0.16|35.2|0.34|280|UWD1C221MCL1GS|
||330|8×10|0.20|52.8|0.17|450|UWD1C331MCL1GS|
||470|8×10|0.20|75.2|0.17|450|UWD1C471MCL1GS|
||680|10×10|0.20|108.8|0.09|670|UWD1C681MCL1GS|



CAT.8100M 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UWD** 

## Dimensions 

**==> picture [512 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（ [µA] ） Impedance（Ω）max. Rated Ripple（mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 2 minutes ） （20℃/100kHz） （105℃/100kHz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ<br>|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>2 minutes ）|Impedance（Ω）<br>max.<br>（20℃/100kHz）<br>|Rated Ripple<br>（mArms）<br>（105℃/100kHz）|Part Number|
|---|---|---|---|---|---|---|---|
|||||||||
|25<br>（1E）|10|4×5.8|0.14|3|1.80|80|UWD1E100MCL1GS|
||15|5×5.8|0.14|3.75|0.76|150|UWD1E150MCL1GS|
||22|5×5.8|0.14|5.5|0.76|150|UWD1E220MCL1GS|
||27|6.3×5.8|0.14|6.75|0.44|230|UWD1E270MCL1GS|
||33|6.3×5.8|0.14|8.25|0.44|230|UWD1E330MCL1GS|
||47|6.3×5.8|0.14|11.75|0.44|230|UWD1E470MCL1GS|
||56|6.3×5.8|0.14|14|0.44|230|UWD1E560MCL1GS|
||68|6.3×5.8|0.14|17|0.44|230|UWD1E680MCL1GS|
||100|6.3×7.7|0.14|25|0.34|280|UWD1E101MCL1GS|
||150|8×10|0.16|37.5|0.17|450|UWD1E151MCL1GS|
||220|8×10|0.16|55|0.17|450|UWD1E221MCL1GS|
||330|10×10|0.16|82.5|0.09|670|UWD1E331MCL1GS|
||470|10×10|0.16|117.5|0.09|670|UWD1E471MCL1GS|
|35<br>（1V）|4.7|4×5.8|0.12|3|1.80|80|UWD1V4R7MCL1GS|
||10|5×5.8|0.12|3.5|0.76|150|UWD1V100MCL1GS|
||15|5×5.8|0.12|5.25|0.76|150|UWD1V150MCL1GS|
||22|5×5.8|0.12|7.7|0.76|150|UWD1V220MCL1GS|
||27|6.3×5.8|0.12|9.45|0.44|230|UWD1V270MCL1GS|
||33|6.3×5.8|0.12|11.55|0.44|230|UWD1V330MCL1GS|
||47|6.3×5.8|0.12|16.45|0.44|230|UWD1V470MCL1GS|
||56|6.3×7.7|0.12|19.6|0.34|280|UWD1V560MCL1GS|
||68|6.3×7.7|0.12|23.8|0.34|280|UWD1V680MCL1GS|
||100|8×10|0.14|35|0.17|450|UWD1V101MCL1GS|
||150|8×10|0.14|52.5|0.17|450|UWD1V151MCL1GS|
||220|10×10|0.14|77|0.09|670|UWD1V221MCL1GS|
||330|10×10|0.14|115.5|0.09|670|UWD1V331MCL1GS|
|50<br>（1H）|1|4×5.8|0.12|3|5.00|30|UWD1H010MCL1GS|
||2.2|4×5.8|0.12|3|5.00|30|UWD1H2R2MCL1GS|
||3.3|4×5.8|0.12|3|5.00|30|UWD1H3R3MCL1GS|
||4.7|5×5.8|0.12|3|1.52|85|UWD1H4R7MCL1GS|
||10|6.3×5.8|0.12|5|0.88|165|UWD1H100MCL1GS|
||15|6.3×5.8|0.12|7.5|0.88|165|UWD1H150MCL1GS|
||22|6.3×5.8|0.12|11|0.88|165|UWD1H220MCL1GS|
||27|6.3×7.7|0.12|13.5|0.68|185|UWD1H270MCL1GS|
||33|6.3×7.7|0.12|16.5|0.68|185|UWD1H330MCL1GS|
||47|6.3×7.7|0.12|23.5|0.68|185|UWD1H470MCL1GS|
||56|8×10|0.14|28|0.34|300|UWD1H560MCL1GS|
||68|8×10|0.14|34|0.34|300|UWD1H680MCL1GS|
||100|8×10|0.14|50|0.34|300|UWD1H101MCL1GS|
||150|10×10|0.14|75|0.18|670|UWD1H151MCL1GS|
||220|10×10|0.14|110|0.18|670|UWD1H221MCL1GS|



For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100M

Updated at April 27, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →