UUX1E101MNL1GS

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UUX** 

Chip Type, Wide Temperature Range 

Chip type, operating over wide temperature range of to -55 to +105°C. 

Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). 

**==> picture [114 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
UUB ULR<br>High High<br>Temperature Voltage<br>UUJ Extendedrange UUX<br>an<br>**----- End of picture text -----**<br>


Specifications Item Performance Characteristics ~~OO~~ Category Temperature Range –55 to +105°C (6.3 to 100V),  –40 to +105°C  (160 to 400V) Rated Voltage Range 6.3 to 400V ~~es~~ Rated Capacitance Range 1 to 1000µF ~~a~~ Capacitance Tolerance ±20% at 120Hz, 20°C ~~ee~~ Leakage Current Rated voltaLeakage Currentge (V) After 1 minute's application of rated volta6.3 to 100ge,  leakage current is not more than 0.03CV (µA). I = 0.04CV+100160 to 400(µA) max.(1 minute's) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 200 250 400 tan  δ (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.08 0.20 0.20 0.20 0.25 ~~a~~ Measurement frequency: 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 100 160 200 250 400 Stability at Low Temperature Impedance ratio Z–55°C / Z+20°C 4 4 3 3 3 2 3 4 — — — — ZT / Z20 (MAX.) Z–40°C / Z+20°C — — — — — — — — 6 6 6 10 ~~ae=—==========~~ The specifications listed at right shall be met when the Capacitance change Within ±20% of the initial capacitance value Endurance capacitors are restored to 20°C after the rated voltage is tan δ 200% or less than the intial specified value applied for 2000 hours (160 to 400V : 3000hours) at 105°C. Leakage current Less than or equal to the initial specified value ~~a ==~~ Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. ~~ee ———~~ Resistance to soldering The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet Catan pδacitance change Within ±10% of the initial caLess than or equal to the initial spacitance valuepecified value heat the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. ~~RR~~ 

## Chip Type 

Type numbering system  (Example : 10V 100µF) 

**==> picture [487 x 240] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4 5 6 7 8 9 10 11 12 13 14<br> (φ6.3,  φ8 × 6.2)  : Positive U U X coo 1 A 1 0 1 M co C L 1 G S<br>Plastic platform<br>0.3MAX. C±0.2 Package code<br>105˚C Marking 2Voltage Size code<br>Configuration<br>1 a e a ge ’ Capacitance tolerance (±20%)  — D × L Code<br>Trade mark 6.3 × 7.7 CL<br>Rated capacitance (100µF)<br>8 × 6.2 CL<br>Lot No. Capacitance L±0.3 H Rated voltage (10V)  8 × 10 NL<br>Negative Series name 10 × 10 NL<br>of 1 Size φ8×6.2 only gs |= Type<br>2 Voltage mark for 6.3V is   6V  .<br> (mm)<br>φ D × L 6.3 × 7.7 8 × 6.2 8 × 10 10 × 10<br>A 2.4 3.3 2.9 3.2<br>B 6.6 8.3 8.3 10.3<br>C 6.6 8.3 8.3 10.3<br> (φ8 × 10,  φ10)  Positive E 2.2 2.3 3.1 4.5<br>Plastic platform L 7.7 6.2 10 10<br>0.3MAX. C±0.2 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1<br>105˚C Marking 2 Voltage<br>Trade mark<br>= Lot No. Capacitance a o L±0.5 i as — H thX 65 Negative<br>Pressure relief vent<br>Dimension table in next page.<br>0.5MAX.<br>A±0.2<br>A2P 100 10V D±0.5φ B0.2± EA±0.2<br>0.5MAX.<br>A±0.2<br>E<br>A2P 100 16V D±0.5φ B±0.2 A±0.2<br>**----- End of picture text -----**<br>


152 | 

[ CAT.8100F 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UUX** 

## Dimensions 

**==> picture [511 x 270] intentionally omitted <==**

**----- Start of picture text -----**<br>
V 6.3 10 16 25 35 50 63 100<br>Cap.<br>(μF) Code 0J 1A 1C 1E 1V 1H 1J 2A<br>4.7 4R7 8×6.2 42<br>10 100 8×6.2 51 8×10 75<br>22 220 8×6.2 67 [(] 64 [)] 8×10 108 10×10 150 [(] 121 [)]<br>33 330 8×6.2 76 [(] 75 [)] 8×10 133 10×10 185 [(] 179 [)] 10×10 180<br>47 470 8×6.2 79 [(] 78 [)] 8×10 124 10×10 180 [(] 167 [)] 10×10 220 10×10 230<br>100 101 8×6.2 90 8×10 148 [(] 111 [)] 8×10 181 10×10 304 [(] 283 [)] 10×10 310 10×10 320<br>220 221 8×10 161 [(] 121 [)] 8×10 173 10×10 330 [(] 307 [)] 10×10 351 [(] 283 [)] 10×10 450<br>330 331 8×10 288 10×10 318 [(] 296 [)] 10×10 441 [(] 410 [)] 10×10 372<br>470 471 10×10 340 [(] 316 [)] 10×10 351 [(] 326 [)] 10×10 489<br>680 681 10×10 408 10×10 392 Case size Rated<br> 1000 102 10×10 495 φD × L (mm) ripple<br>V 160 200 250 400<br>Cap.<br>(μF) Code 2C 2D 2E 2G<br>1 010 8×10 25<br>1.8 1R8 8×10 26<br>2.2 2R2 8×10 27<br>3.3 3R3 8×10 31 8×10 31 10×10 38<br>3.9 3R9 8×10 34 8×10 34 10×10 39<br>4.7 4R7 8×10 37 8×10 37 10×10 40<br>6.8 6R8 8×10 44 8×10 44<br>10 100 8×10 57 10×10 64 10×10 64<br>18 180 10×10 64<br>**----- End of picture text -----**<br>


Rated ripple current (mArms) at 105°C 120Hz 

Size φ6.3 × 7.7 is available for capacitors marked. "   " / Size φ8 × 10 is available for capacitors marked. "   " In this case, 6 will be put at 12th digit of type numbering system. 

## Frequency coefficient of rated ripple current 

|Cap.(µF)<br>Frequency|50 Hz<br>|120 Hz|300 Hz|1 kHz|10 kHz or more|
|---|---|---|---|---|---|
|0001 to 47V00|0.80|1.00|1.15|1.40|1.67|
|100 to 1000|0.85|1.00|1.08|1.20|1.30|



Taping specifications are given in page 23. 

Recommended land size, soldering by reflow are given in page 18, 19. 

- Please select UUJ(p.158) if high C/V products are reqired. 

- Please refer to page 3 for the minimum order quantity. 

CAT.8100F 

153