UUR1H220MCL1GS

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UUR** 

Chip Type, High CV 

Chip type, higher capacitance in larger case sizes. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). 

**==> picture [511 x 639] intentionally omitted <==**

**----- Start of picture text -----**<br>
UWS<br>Applicable to automatic mounting machine fed with carrier tape.<br>Compliant to the RoHS directive (2011/65/EU). High<br>Temperature<br>Reflow<br>UUG Extendedrange UUR<br>0 _<br>Higher<br>ct C/V<br>UWX<br>Specifications<br>Item Performance Characteristics<br>SS Category Temperature Range –40 to +85°C<br>Rated Voltage Range 4 to 100V<br>Rated Capacitance Range 3.3 to 1500µF<br>Capacitance Tolerance ± 20% at 120Hz, 20°C<br>ee Leakage Current ———————————————————— After 1 minute's application of rated voltage,  leakage current is not more than 0.03CV (µA) .<br>Measurement frequency : 120Hz at 20°C<br>Tangent of loss angle (tan δ) Rated voltage (V) 4 6.3 10 16 25 35 50 63 100<br>tan  δ (MAX.) 0.35 0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.12<br>esSe Measurement frequency: 120Hz<br>Rated voltage (V) 4 6.3 10 16 25 35 50 63 100<br>Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 7 5 4 3 2 2 2 2 2<br>ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 10 8 6 4 3 3 3 3<br>a<br>The specifications listed at right shall be met when  Capacitance change Within ±20% of the initial capacitance value<br>Endurance the capacitors are restored to 20°C after the rated  tan δ 200% or less than the initial specified value<br>voltage is applied for 2000 hours at 85°C. Leakage current Less than or equal to the initial specified value<br>Shelf Life | [ES] After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4  ——<br>a clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.<br>Resistance to soldering The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet  Catan pδacitance change Within ±10% of the initial caLess than or equal to the initial spacitance valuepecified value<br>heat the characteristic requirements listed at right when they<br>are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value<br>Marking Black print on the case top.<br>ee<br>Chip Type Type numbering system  (Example : 10V 100µF)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14<br> (φ6.3,  φ8 × 6.2)  Plastic platform Positive U U R 1 A 1 0 1 M C L 1 G S<br>Capacitance 2Voltage a 0.3MAX. e C±0.2 Package code<br>Lot No. Size code<br>® = “an cocoon oo Configuration<br>Trade mark1 Capacitance tolerance (±20%) φ D × L Code<br>Rated capacitance (100μF) 6.3 × 5.8 CL<br>“ O L E L±0.3 H tt Rated voltage (10V) 6.3 × 7.7 CL<br>Negative   8 × 6.2 CL<br>1 Size φ8 × 6.2 only Series name  8 × 10 NL<br>2 Voltage mark for 6.3V is   6V  .  ie (ee Type = 10 × 10 NL<br> (φ8 × 10,  φ10 × 10)<br>(mm)<br>Plastic platform Positive φ D × L 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 10<br>Lot No. Capacitance 0.3MAX. C±0.2 A 2.4 2.4 3.3 2.9 3.2<br>Trade mark 2 Voltage B 6.6 6.6 8.3 8.3 10.3<br>C 6.6 6.6 8.3 8.3 10.3<br>E 2.2 2.2 2.3 3.1 4.5<br>: Us L 5.8 7.7 6.2 10 10<br>H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1<br>L±0.5 H<br>Obie Negative<br>Pressure relief vent<br>0.5MAX.<br>A±0.2<br>0.5± E<br>A2 100 10V Dφ B±0.2 A±0.2<br>0.5MAX.<br>A±0.2<br>E<br>A2 220 16V D±0.5φ B±0.2 A±0.2<br>**----- End of picture text -----**<br>


OO Dimension table in next page. 

CAT.8100E 

148 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UUR** 

## Dimensions 

|Cap.(µF)<br>V<br>Code|Cap.(µF)<br>V<br>Code|**4**|**4**|**6.3**|**6.3**|**10**|**10**|**16**|**16**|**25**|**25**|**25**|**35**|**35**|**50**|**50**|**63**|**63**|**100**|**100**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||0G||0J||1A||1C||1E|||1V||1H||1J||2A||
|**3.3**|3R3||||||||||||||||||6.3×5.8|29|
|**4.7**|4R7||||||||||||||||6.3×5.8|31|8×6.2|40 (35)|
|**10**|100||||||||||||||||8×6.2|46|8×10.|77|
|**22**|220||||||||||||||6.3×5.8|45|8×10.|96|8×10.|100|
|**33**|330||||||||||||6.3×5.8|55|8×6.2|95(94)|8×10.|117|10×10.|130|
|**47**|470|||||||||6.3×5.8||65|8×6.2|105(94)|8×10.|140 (105)|8×10.|140|10×10.|155|
|**100**|101|||||6.3×5.8|70|8×6.2|125|8×6.2||145 (143)|8×10.|175 (132)|10×10.|195 (181)|10×10.|232|||
|**150**|151|||||6.3×5.8|85|6.3×7.7|151|8×10.||192|8×10.|214|10×10.|238|||||
|**220**|221|||8×6.2|160 (143)<br>|8×6.2|175 (173)|8×10.|215 (162)||||10×10.|265 (246)|10×10.|289|||||
||||||||||||10×10.|250 (232)|||||||||
|**330**|331|6.3×5.8|152|8×6.2|190 (188)<br>|8×10.|240|8×10.|270|10×10.||305 (284)|10×10.|324|||||||
|**470**|471|6.3×7.7|200|8×10|265<br>.|8×10.|290|10×10.|330 (307)|10×10.||393|||||||||
|**680**|681|8×10.|284|8×10|318<br>.|10×10.|374|10×10.|396||||||||||||
|**1000**|102|8×10.|344|10×10|400 (372)<br>.|10×10.|454||||||||||||Case size<br>φD × L<br>(mm)|Rated<br>ripple|
|**1500**|152|10×10.|347|10×10|489<br>.||||||||||||||||



Size φ6.3 × 5.8 is available for capacitors marked. "   " Size φ6.3 × 7.7 is available for capacitors marked. "   " Size φ8 × 10 is available for capacitors marked. "    " In this case, 6 will be put at 12th digit of type numbering system. 

Rated ripple current (mArms) at 85°C 120Hz 

## Frequency coefficient of rated ripple current 

|00Less than 47V<br>100 to 1500<br>Cap.(µF)<br>Frequency|50 Hz|120 Hz|300 Hz|1 kHz|10 kHz or more|
|---|---|---|---|---|---|
||0.80|1.00|1.15|1.40|1.67|
||0.85|1.00|1.08|1.20|1.30|



- Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. 

Please select UUG(p.156) if high CV products are required. Please refer to page 3 for the minimum order quantity. 

CAT.8100E 

149