UPZ2W240MND9

## **ALUMINUM  ELECTROLYTIC  CAPACITORS** 

**PZ** High Voltage, Miniature-sizedseries 

High ripple current. **PT** Load life of 2000 hours at 105°C. Smaller Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU). 

**==> picture [22 x 29] intentionally omitted <==**

**----- Start of picture text -----**<br>
PZ<br>Smaller<br>**----- End of picture text -----**<br>


## Specifications 

## **PH** 

|Item|Performance Characteristics|
|---|---|
|Category Temperature Range|–25 to +105°C|
|Rated Voltage Range|200 to 450V|
|Rated Capacitance Range|18 to 470µF|
|Capacitance Tolerance|± 20% at 120Hz, 20°C|
|Leakage Current|After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA).|
|Tangent of loss angle (tanδ)|Measurement frequency : 120Hz at 20°C<br>Rated voltage(V)<br>tanδ(MAX.)<br>200<br>0.12<br>420<br>0.20<br>450<br>0.20<br>250<br>0.15<br>400<br>0.15|
|Stability at Low Temperature|Measurement frequency : 120Hz<br>Z–25°C / Z+20°C<br>Rated voltage(V)<br>Impedance ratio ZT / Z20 (MAX.)<br>200<br>3<br>250<br>3<br>400<br>8<br>420<br>8<br>450<br>8|
|Endurance|The specifications listed at right shall be met when the<br>capacitors are restored to 20°C after D.C. bias plus rated<br>ripple current is applied for 2000 hours at 105°C, the peak<br>voltage shall not exceed the rated voltage.<br>Capacitance change<br>Leakage current<br>tanδ<br>Within ± 20% of the initial capacitance value<br>Less than or equal to the initial specified value<br>200% or less than the initial specified value|
|Shelf Life|After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C<br>5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.|
|Marking|Printed with white color letter on dark brown sleeve.|



## Radial Lead Type 

**==> picture [261 x 91] intentionally omitted <==**

**----- Start of picture text -----**<br>
φ d<br>—™ Sleeve (P.E.T.) /, |<br>f i<br>|a [eee] “1<br>(mm)<br>Pressure L [+ ][2.0 MAX.] 15 [MIN] 4 [MIN] φD 10 12.5 16 18<br>relief vent P 5.0 5.0 7.5 7.5<br>φd 0.6 0.8 0.8 0.8<br>±0.5<br>±0.5 MAX. P<br>Dφ<br>**----- End of picture text -----**<br>


**==> picture [84 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pencil - shaped Type<br>**----- End of picture text -----**<br>


**==> picture [250 x 116] intentionally omitted <==**

**----- Start of picture text -----**<br>
φ d<br>("ew [—""moD] [)] /- ®<br>=  ©<br>= |<br>Pressure L [+ ][2.0 MAX.] 15 [MIN] 4 [MIN]<br>relief vent (mm)<br>φD 10 12.5<br>P 5.0 5.0<br>φd 0.6 0.6<br>±0.5<br>±0.5 MAX. P<br>Dφ<br>**----- End of picture text -----**<br>


**==> picture [33 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sleeve (P.E.T.)<br>**----- End of picture text -----**<br>


Type numbering system (Example : 200V 220µF) 

**==> picture [217 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4 5 6 7 8 9 10 11 12<br>U P Z 2 D 2 2 1 M H D T<br>coo co<br>Size code<br>Configuration<br>Capacitance tolerance (±20%)<br>Rated capacitance (220µF)<br>Rated voltage (200V)<br>Series name<br>Type<br> Configuration<br>Size code Blank, 6 9<br>φ D Pb-free leadwire Pb-free PET sleeve<br>10 PD ND<br>12.5 to 18 HD NY<br>—— —<br>**----- End of picture text -----**<br>


- Please refer to page 20 about the end seal configuration. 

Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. fe Dimension table in next page. 

CAT.8100D 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **PZ** series 

## Dimensions 

|V<br>Code<br>Cap.(µF)|V<br>Code<br>Cap.(µF)|**200**|**200**|**400**|**400**|**420**|**420**|**450**|**450**|
|---|---|---|---|---|---|---|---|---|---|
|||2D||2G||W6||2W||
|**18**|180|||||||.010×31.5|180|
|**22**|220|||||.010×31.5|200|||
|**27**|270|||.010×31.5|240|||||
|**33**|330|||||||12.5×31.5|280|
|**39**|390|||||12.5×31.5|310|12.5×35.5|320|
|**47**|470|||12.5×31.5|370|12.5×35.5|360|12.5×40.0|380|
|**56**|560|||12.5×35.5|420|12.5×40.0|430|.016×31.5|440|
|**68**|680|||12.5×40.0|480|.016×31.5|510|.016×35.5|490|
|**82**|820|.010×31.5|400|||.016×35.5|570|.016×40.0|550|
|||||||||.018×31.5|550|
|**100**|101|||.016×31.5|580|.016×40.0|610|.018×35.5|650|
|||||||.018×31.5|610|||
|**120**|121|||.016×35.5|670|.018×35.5|660|.018×40.0|740|
|||||.018×31.5|670|||||
|**150**|151|12.5×31.5|620|.016×40.0|770|.018×40.0|710|||
|||||.018×35.5|770|||||
|**180**|181|12.5×35.5|700|.018×40.0|880|||||
|**220**|221|12.5×40.0|800|||||||
|**270**|271|.016×31.5|870|||||||
|**330**|331|.016×35.5|1010|||||||
|||.018×31.5|1010|||||||
|**390**|391|.016×40.0|1130|||||||
|||.018×35.5|1120|||||||
|**470**|471|.018×40.0|1270|||||Case sizeφD × L (mm)|Rated ripple|
|||||||Rated ripple  current (mArms) at 105°C 120Hz||||



: In this case,  6 will be put at 12th digit of type numbering system. 

## Pencil-shaped Type 

|V<br>Code<br>Cap.(µF)|V<br>Code<br>Cap.(µF)|**200**|**200**|**250**|**250**|**400**|**400**|**450**|**450**|
|---|---|---|---|---|---|---|---|---|---|
|||2D||2E||2G||2W||
|**33**|330|||||||.010×40.0|360|
|**47**|470|||||.010×40.0|435|.010×50.0|450|
|**56**|560|||||.010×50.0|520|||
|**82**|820|||.010×40.0|610|||12.5×50|730|
|**100**|101|||||12.5×50|770|||
|**120**|121|.010×40.0|680|.010×50.0|740|||||
|**150**|151|.010×50.0|830|||||||
|**220**|221|||12.5×50|1140|||Case sizeφD × L (mm)|Rated ripple|
|**270**|271|12.5×50|1265|||||||



Rated ripple  current (mArms) at 105°C 120Hz 

: In this case, 9 will be put at 12th digit of type numbering system. 

## Frequency coefficient of rated ripple current 

|V|60Hz|120Hz|500Hz|1kHz|10kHz or more|
|---|---|---|---|---|---|
|200|0.80|1.00|1.20|1.30|1.40|
|400 to 450|0.80|1.00|1.25|1.40|1.50|



CAT.8100D