UMS05-1A80-75L

## UMS Series Reed Relays 

- **Features: Ultra miniature Single-In Line Relay with Internal Magnetic Shield, UL-listed** 

- **Applications: PCB & Semiconductor Test Systems, Automated Test Systems, High Density Assembly** 

- **Markets: Test & Measurement, Telecommunication,  ATE** 

|Part Description:<br>U M S 0 5 - 1 A 8 0 - 7 5 X<br>~~—_———~~|Part Description:<br>U M S 0 5 - 1 A 8 0 - 7 5 X<br>~~—_———~~|Part Description:<br>U M S 0 5 - 1 A 8 0 - 7 5 X<br>~~—_———~~|Part Description:<br>U M S 0 5 - 1 A 8 0 - 7 5 X<br>~~—_———~~|Part Description:<br>U M S 0 5 - 1 A 8 0 - 7 5 X<br>~~—_———~~|
|---|---|---|---|---|
|~~—_———~~|||||
|Nominal<br>Voltage<br>~~—_——~~|Contact Quantity<br>& Contact Form<br>~~—_——~~|Switch<br>Model<br>~~—_——~~|Pin Out<br>~~—~~|Option<br>~~—~~|
|05<br>~~—_——~~|1A<br>~~—_——~~|80<br>~~—_——~~|75<br>~~—~~|L, D<br>~~—~~|



|Customer Options|Switch Model<br>~~—————_~~|Unit<br>~~—————_~~<br>~~ee~~|
|---|---|---|
|Contact Data<br>~~ee~~|80(A Dry)<br>~~—————_~~<br>~~ee~~||
|Contact Material|Rhodium||
|Rated Power (max.)<br>AnyDC combination of V&A not to exceed their individual max.’s|10|W|
|Switching Voltage (max.)<br>DC orpeak AC|170|V|
|Switching Current (max.)<br>DC orpeak AC|0.5|A|
|Carry Current (max.)<br>DC orpeak AC|1.0|A|
|Contact Resistance (max.)<br>@0.5V & 10mA|200|mOhm|
|Breakdown Voltage (min.)<br>Accordingto EN60255-27|0.21|kVDC|
|Operating Time (max.)<br>IncludingBounce,Measured w/40%Pull-In Overdrive|0.2|ms|
|Release Time (max.)<br>Measured without Coil Suppression|0.1|ms|
|Insulation Resistance (typ.)<br>Rh<45%,100V Test Voltage|1010/ 1012|Ohm|
|Capacitance (typ.)<br>@10kHz across open Switch|0.2 / 0.4|pF|



Version 03 01 Aug 2025 Page 1 D. Stastny 

APAC: +86 21/37606000 | salesasia@standexmeder.com 

USA: +1 866.782.6339 | info@standexelectronics.com 

EMEA: +49 (0)7733 9253 200 | salesemea@standexelectronics.com 

## UMS Series Reed Relays 

|Coil Data (at 20**°**C)|Coil Data (at 20**°**C)|Coil Voltage (VDC)|Coil Voltage (VDC)|Coil Resistance<br>(Ohm)|Pull-In Voltage<br>(VDC)|Drop-Out<br>Voltage (VDC)|Coil Power<br>(mW)|
|---|---|---|---|---|---|---|---|
|Contact<br>Form|Switch<br>Model|Nominal|Max.|Typical (**±**10 %)|Max.|Min.|Nominal|
|1A|80|05|7.5|400|3.75|0.5|62.5|
|The Pull-In,Drop-Out Voltage and Coil Resistance will change at rate of 0.4%per °K The figures inparentheses are for relays in metal casing.||||||||



|RelayData(at 20°C)|RelayData(at 20°C)|Unit|
|---|---|---|
|Dielectric Strength Coil/Contact (min.)<br>Accordingto IEC 60255-27|1.5|kVDC|
|Insulation Resistance Coil/Contact (min./typ.)<br>Rh<45%,200V Test Voltage|1012/ 1013|Ohm|
|Capacitance Coil/Contact (typ. / max.)<br>@10 kHz with Closed Switch|0.9 / 1.1|pF|
|Shock Resistance (max.)<br>1/2 sine wave duration 11ms|50|g|
|Vibration Resistance (max.)<br>10 – 2,000 Hz|20|g|
|Operating Temperature (max.)<br>Surroundingof the relay’s housing|-20 to 85|°C|
|Storage Temperature (max.)<br>Surroundingof the relay’s housing|-35 to 100|°C|
|Soldering Temperature (max.)<br>5 seconds max.|260|°C|
|Washability<br>Aqueous rinsingsuitable. Proper dryingnecessary.|Fully Sealed||



## Dimensions in mm (Tolerances acc. to ISO 2768-m) 

## **Glossary Option** 

|**L**|Standard, with Magnetic Shield|
|---|---|
|**D**|with Diode, with Magnetic Shield|
|**_M_**|_with Magnetic Shield, without Diode_|
|**_Q_**|_with Diode and Magnetic Shield_|
|**_HR_**|_High Resistance Coil_|
|UMS Relays are available with “L” and “D” Option||



**Pin Out** Top View  (Pitch 1.52 mm [0.06 inch]) 

**75D** 

**==> picture [24 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
75L<br>**----- End of picture text -----**<br>


Version 03 01 Aug 2025 Page 2 D. Stastny 

APAC: +86 21/37606000 | salesasia@standexmeder.com 

USA: +1 866.782.6339 | info@standexelectronics.com 

EMEA: +49 (0)7733 9253 200 | salesemea@standexelectronics.com 

## UMS Series Reed Relays 

~~SS~~ Life Test Data (*Load increase reduces life expectancy of Reed Switches) 

**==> picture [225 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
Load KSK-1A80<br>100V/10mA<br>20V/500mA<br>10V/100mA<br>10V/4mA<br><5V/10mA<br>1,E+05 1,E+06 1,E+07 1,E+08 1,E+09 1,E+10<br>Typical Number of Operations<br>**----- End of picture text -----**<br>


|GlossaryContact Form<br>~~«=~~|GlossaryContact Form<br>~~«=~~|GlossaryContact Form<br>~~«=~~|
|---|---|---|
|Form A<br> ~~«~~|NO = Normally Open Contacts<br>SPST = Single Pole Single Throw<br>~~«=~~|~~=~~<br>~~tio~~<br>~~ot~~<br>~~—~~|
|Form B|NC = Normally Closed Contacts<br>SPST = Single Pole Single Throw||
|Form C|Changeover<br>SPDT = Single Pole Double Throw||
|UMS Relays are available onlyin “Form A” configuration|||



## Handling & Assembly Instructions 

- Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used - see our website. 

- External magnetic fields and magnetic effects, due to adjacent relays in high density matrices that may influence the relays' electrical characteristics, must be taken into consideration. 

- Mechanical shock impacts, e.g. dropping the relays, may cause immediate or post-installation failure. 

- Wave soldering: maximum 260°C / 5 seconds. 

Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information, please consult the product datasheet, available upon request. 

This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be incorporated in future revisions. 

For deviating values, most current specifications and products please contact your nearest sales office. 

Version 03 01 Aug 2025 Page 3 D. Stastny 

APAC: +86 21/37606000 | salesasia@standexmeder.com 

USA: +1 866.782.6339 | info@standexelectronics.com 

EMEA: +49 (0)7733 9253 200 | salesemea@standexelectronics.com