ULV2G100MNL1GS

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **ULV** 

Chip Type, High Voltage. Long Life. 

Chip Type, high voltage and long life. Load life of 10000 hours at +105°C 

Load life of 10000 hours at +105°C Applicable to automatic mounting machine using carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 Qualified. Please contact us for details. **ULV** Long Life **ULR** « ~~|~~ 

|Item<br>~~_—_~~|Performance Characteristics<br>~~_—_ee~~|
|---|---|
|CategoryTemperature Range<br>~~_—_~~|–40 to +105°C<br>~~_—_ee~~|
|Rated Voltage Range<br>~~_—_~~|160 to 500V<br>~~_—_ee~~|
|Rated Capacitance Range|1.8 to 33µF|
|Capacitance Tolerance<br>Leakage Current|500<br>0.04CV+200(µA)max.(1 minute's at 20°C)<br>160 to 450<br>0.04CV+100(µA)max.(1 minute's at 20°C)<br>±20% at 120Hz, 20°C<br>Rated voltage(V)<br>–|
|Tangent of loss angle (tanδ)<br>~~a~~|450<br>0.30<br>Measurement frequency : 120Hz at 20°C<br>160<br>0.20<br>200<br>0.20<br>250<br>0.25<br>400<br>0.25<br>500<br>0.30<br>Rated voltage(V)<br>tanδ(max.)<br>~~a~~<br>~~eee~~|
|Stability at Low Temperature<br>~~a~~<br>~~ee~~|400<br>10<br>450<br>15<br>Stability at Low Temperature<br>Z(–40°C) / Z(+20°C)<br>Rated voltage(V)<br>Impedance ratio<br>ZT / Z20 (max.)<br>200<br>6<br>160<br>6<br>Measurement frequency: 120Hz<br>500<br>15<br>250<br>10<br>~~a~~<br>~~eee~~<br>~~ee~~|
|Endurance<br>~~ee~~<br>~~ee~~<br>~~es~~|The specifications listed at right shall be met when the<br>capacitors are restored to 20°C after the rated voltage is<br>applied for 10000 hours at 105°C.<br>Capacitance change<br>Leakage current<br>tanδ<br>Within ±30% of the initial capacitance value<br>Less than or equal to the initial specified value<br>300% or less than the intial specified value<br>~~ee~~<br>~~ee~~|
|Shelf Life<br>~~ee~~<br>~~es~~<br>~~—————~~|After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4<br>clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.<br>~~ee~~<br>~~—————~~|
|Resistance to soldering<br>heat<br>~~es~~<br>~~—————~~|The capacitors are kept on a hot plate for 30 seconds, which is<br>maintained at 250°C and then performing voltage treatment based on<br>JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic<br>requirements listed at right when they are removed from the plate.<br>Capacitance change<br>Leakage current<br>tanδ<br>Within ±10% of the initial capacitance value<br>Less than or equal to the initial specified value<br>Less than or equal to the initial specified value<br>~~—————~~|
|Marking<br>~~—————~~|Black print on the case top.<br>~~—————~~|



※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) 

## Chip Type 

## Type numbering system  (Example : 400V 6.8µF) 

(φ8 , φ10) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Voltage(2G : 400V) Plastic platform U L V 2 G 6 R 8 M N L 1 G S Series 0.3max. C±0.2 Lot No. Taping code Trade mark Configuration Capacitance tolerance (±20%) Capacitance L±1.0 H Rated capacitance (6.8µF) Negative Pressure relief vent Rated voltage (400V) Series name (mm) ~~ple~~ φD × L 8 × 10 10 × 10 10 × 13.5 ~~[~~ = Type A 2.9 3.2 3.2 B 8.3 10.3 10.3 C 8.3 10.3 10.3 E 3.1 4.5 4.5 Voltage L 10 10 13.5 V 160 200 250 400 450 500 H 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code 2C 2D 2E 2G 2W 2H sees ~~——————~~ 

Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Coefficient 0.80 1.00 1.25 1.40 1.60 ~~-—~~ 

Dimension table in next page. 

CAT.8100M 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **ULV** 

## **■** Dimensions 

**==> picture [512 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage（V） CapacitanceRated Case Size tan δ Leakage Current（ [µA] ） Rated Ripple（mArms） Part Number<br>（code） （µF） φD×L（mm） （ at 20℃ after 1 minute ） （105℃/120Hz）<br>**----- End of picture text -----**<br>


|Rated Voltage<br>（V）<br>（code）|Rated<br>Capacitance<br>（µF）|Case Size<br>φD×L（mm）|tanδ|Leakage Current<br>（µA）<br>（<br>at 20℃ after<br>1 minute ）|Rated Ripple<br>（mArms）<br>（105℃/120Hz）|Part Number|
|---|---|---|---|---|---|---|
||||||||
|160<br>（2C）|15|8×10|0.20|196|50|ULV2C150MNL1GS|
||22|10×10|0.20|240.8|65|ULV2C220MNL1GS|
||33|10×13.5|0.20|311.2|70|ULV2C330MNL1GS|
|200<br>（2D）|12|8×10|0.20|196|50|ULV2D120MNL1GS|
||18|10×10|0.20|244|65|ULV2D180MNL1GS|
||27|10×13.5|0.20|316|70|ULV2D270MNL1GS|
|250<br>（2E）|8.2|8×10|0.25|182|35|ULV2E8R2MNL1GS|
||15|10×10|0.25|250|50|ULV2E150MNL1GS|
||18|10×13.5|0.25|280|55|ULV2E180MNL1GS|
|400<br>（2G）|3.9|8×10|0.25|162.4|35|ULV2G3R9MNL1GS|
||6.8|10×10|0.25|208.8|50|ULV2G6R8MNL1GS|
||10|10×13.5|0.25|260|55|ULV2G100MNL1GS|
|450<br>（2W）|3.3|8×10|0.30|159.4|25|ULV2W3R3MNL1GS|
||5.6|10×10|0.30|200.8|40|ULV2W5R6MNL1GS|
||7.5|10×13.5|0.30|235|45|ULV2W7R5MNL1GS|
|500<br>（2H）|1.8|8×10|0.30|236|25|ULV2H1R8MNL1GS|
||3.3|10×10|0.30|266|40|ULV2H3R3MNL1GS|
||4.7|10×13.5|0.30|294|45|ULV2H4R7MNL1GS|



For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. 

CAT.8100M