Image not available
Illustrative purposes only
ULP180-1324
AC/DC Open Frame Power Supply (PSU), ITE, 1 Output, 180W @ 13CFM, 120 W, 80V AC to 264V AC
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: EOS POWER
- Product type: AC / DC Open Frame Power Supplies
- SVHC: To Be Advised
- Product Range: ULP180 Series
- No. of Outputs: 1 Output
- Input Voltage VAC: 80V AC to 264V AC
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 5A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Current - Output 4: -
- Output Voltage - Output 1: 24VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
- Power Rating (Forced Cooling): 180W @ 13CFM
- Power Rating (Convection Cooling): 120W
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 72.68 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**180 Watt Industrial**
## Features
l 4 x 2 x 0.75 Inches Form factor l 180 Watts with Forced Air Cooling l Efficiencies upto 92% l -40 to 70 degree operating temperature* l Now IEC/EN/UL62368-1 Compliant **[New]**
~~l 12V / 0.5A Fan Output, Thermal Shut-Down feature~~
~~l[3.37m Hours, Telcordia -SR332-issue 3 ] MTBF l No Load Power < 0.5W l Approved with metal enclosures/accessories~~
## Electrical Specifications
||Input Voltage<br>80-264 VAC/390 VDC,Universal(Derate from 100% at 100V AC to 77% at 80V AC)|Input Voltage<br>80-264 VAC/390 VDC,Universal(Derate from 100% at 100V AC to 77% at 80V AC)|
|---|---|---|
||Input Frequency<br>47-63 Hz||
||Input Current<br>115 VAC: 2.2 A max.<br>230 VAC: 1.1 A max.||
||No Load Power<br><0.5W typical for ULP180-1XXX and <0.85W typical for ULP180-0XXX||
||Inrush Current<br>115 V AC – 25 A,230 VAC – 45 A,264 VAC – 75 A||
||Leakage Current<br>300 uA Typical, (N.A. For Class II Option)Touch current <100uA||
||Efficiency<br>92%(48V,58V),90%(24V,30V),88%(12V,15V)||
||Hold-upTime<br>at 180W:10 ms;120W: 16 ms||
||Power Factor<br>>0.95@115 VAC and 0.9@230 VAC||
||Output Power<br>180W with 13 CFM,upto 120W Convection||
||Line Regulation<br>+/-0.5%||
||Load Regulation<br>+/-1%||
||Transient Response<br>25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50Hz=4% ,<br>recoverytime < 5 ms||
||Rise Time<br>55ms typical||
||Set Point Tolerance<br>+/-1%||
||Output Voltage adjustment+/-3%(Ref. Note 9)||
||Over Current Protection<br>>110%||
||Over Voltage Protection<br>110 to 140%||
||Short Circuit Protection<br>Hiccupmode||
||SwitchingFrequency<br>PFC – 70 to 130 KHz ,PWM – 50-80 KHz||
||OperatingTemperature7<br>- 40 to +70°C, * -40 to 0°C startupisguaranteed with spec deviation||
||Storage Temperature<br>-40 to+85°C||
||Relative Humidity<br>5% to 95%, noncondensing||
||Altitude<br>Operating: 16,000 ft.; Nonoperating: 40,000 ft.||
||MTBF<br>3.37m Hours,Telcordia -SR332-issue 3||
||Isolation Voltage<br>Input to Output – 4000V DC for ITE application<br>Input to GND - 2500 VDC (Not Applicable For Class II Option)||
4EM-20-343 1 39-DE60-44950-002 / A7
|||ULP180-1012 Header Molex @ I/P 12 V 9.37A 10.00A 15.00A 0.0 A 2% N.A<br>Screw Terminal @ O/P<br>ULP180-1312 Header Molex @ I/P 12 V 9.37A 10.00A 15.00A 0.0 A 2% N.A<br>Header Molex @ O/P|
|---|---|---|
|||ULP180-1015 Header Molex @ I/P 15 V 7.50A 8.00A 12.00A 0.0 A 2% N.A<br>Screw Terminal @ O/P<br>ULP180-1315 Header Molex @ I/P 15 V 7.50A 8.00A 12.00A 0.0 A 2% N.A<br>Header Molex @ O/P|
|||ULP180-1024 Header Molex @ I/P 24 V 4.68A 5.00A 7.50A 0.0 A 1% N.A<br>Screw Terminal @ O/P<br>ULP180-1324 Header Molex @ I/P 24 V 4.68A 5.00A 7.50A 0.0 A 1% N.A<br>Header Molex @ O/P|
|||ULP180-1030 Header Molex @ I/P 30 V 3.75A 4.00A 6.00A 0.0 A 1% N.A<br>Screw Terminal @ O/P<br>ULP180-1330 Header Molex @ I/P 30 V 3.75A 4.00A 6.00A 0.0 A 1% N.A<br>Header Molex @ O/P|
|||ULP180-1048 Header Molex @ I/P 48 V 2.34A 2.50A 3.75A 0.0 A 1% N.A<br>Screw Terminal @ O/P<br>ULP180-1348 Header Molex @ I/P 48 V 2.34A 2.50A 3.75A 0.0 A 1% N.A<br>Header Molex @ O/P|
|||ULP180-1058 Header Molex @ I/P 58 V 1.94A 2.07A 3.10A 0.0 A 1%<br>N.A<br>Screw Terminal @ O/P<br>ULP180-1358 Header Molex @ I/P 58 V 1.94A 2.07A 3.10A 0.0 A 1%<br>N.A<br>Header Molex @ O/P|
|||~~ULP180-CK metal cover kit accessory~~<br>~~Add suff~~i~~x “S1” to get model number with Input connector – Screw terminal and Output Connector – Screw Terminal. e.g. ULP180-1012-S1(Without PGPF)~~|
|~~Add suff~~|||
|~~Add suff~~<br>~~Add suff~~|||
||~~Add suff~~||
~~ULP180-CK metal cover kit accessory~~
~~Add suffx “S1” to get model number with Input connector – Screw terminal and Output Connector – Screw Terminal. e.g. ULP180-1012-S1(Without PGPF) Add suffx “S2” to get model number with Input connector – Right Angle Type and Output Connector – Right Angle Type. e.g. ULP180-1012-S2 (Without PGPF)~~
~~For Power supply unit with Base plate (metal accessory option) add “-B” suffx at the end of model number For Power supply unit with L bracket (metal accessory option) add “-L” suffx at the end of model number For Power supply unit with U channel (metal accessory option) add “-U” suffx at the end of model number For Power supply unit with CK Cover kit (metal accessory option) add “-CK” suffx at the end of model number ee E@s~~ Innovatons in Power 4EM-20-343 2 39-DE60-44950-002 / A7
**==> picture [54 x 53] intentionally omitted <==**
**==> picture [562 x 459] intentionally omitted <==**
**----- Start of picture text -----**<br>
Model Number Type of Voltage Max. Load Max.Load Max. Load Min. Load Ripple [1] Signal<br> Connector (Convection) (Convection) (13 CFM)<br> (112.5W) (120W)<br> @50°C @40°C<br>ULP180-0012 Header Molex @ I/P 12 V 9.37A 10.00A 15.00A 0.0 A 2% PG & AC PF [11]<br> Screw Terminal @ O/P<br>ULP180-0312 Header Molex @ I/P 12 V 9.37A 10.00A 15.00A 0.0 A 2% PG & AC PF [11]<br> Header Molex @ O/P<br>ULP180-0015 Header Molex @ I/P 15 V 7.50A 8.00A 12.00A 0.0 A 2% PG & AC PF [11]<br> Screw Terminal @ O/P<br>ULP180-0315 Header Molex @ I/P 15 V 7.50A 8.00A 12.00A 0.0 A 2% PG & AC PF [11]<br> Header Molex @ O/P<br>ULP180-0024 Header Molex @ I/P 24 V 4.68A 5.00A 7.50A 0.0 A 1% PG & AC PF [11]<br> Screw Terminal @ O/P<br>ULP180-0324 Header Molex @ I/P 24 V 4.68A 5.00A 7.50A 0.0 A 1% PG & AC PF [11]<br> Header Molex @ O/P<br>ULP180-0030 Header Molex @ I/P 30 V 3.75A 4.00A 6.00A 0.0 A 1% PG & AC PF [11]<br> Screw Terminal @ O/P<br>ULP180-0330 Header Molex @ I/P 30 V 3.75A 4.00A 6.00A 0.0 A 1% PG & AC PF [11]<br> Header Molex @ O/P<br>ULP180-0048 Header Molex @ I/P 48 V 2.34A 2.50A 3.75A 0.0 A 1% PG & AC PF [11]<br> Screw Terminal @ O/P<br>ULP180-0348 Header Molex @ I/P 48 V 2.34A 2.50A 3.75A 0.0 A 1% PG & AC PF [11]<br> Header Molex @ O/P<br>ULP180-0058 Header Molex @ I/P 58 V 1.94A 2.07A 3.10A 0.0 A 1% PG & AC PF [11]<br> Screw Terminal @ O/P<br>ULP180-0358 Header Molex @ I/P 58 V 1.94A 2.07A 3.10A 0.0 A 1% PG & AC PF [11]<br> Header Molex @ O/P<br>ULP180-CKP metal cover kit accessory<br>Add suffx “ S1 ” to get model number with Input connector – Screw terminal and Output Connector – Screw Terminal. e.g. ULP180-0012-S1 (With PGPF)<br>Add suffx “ S2 ” to get model number with Input connector – Right Angle Type and Output Connector – Right Angle Type. e.g. ULP180-0012-S2 (With PGP F)<br>**----- End of picture text -----**<br>
||Connectors||
|---|---|---|
||~~J1~~<br>~~Pin 1~~<br>~~AC LINE~~<br>~~Pin 2~~<br>~~NOT FITTED~~<br>~~Pin 3~~<br>~~AC NEUTRAL~~||
||~~J2 Option 1 & 2~~<br>~~Pin 1,2,3~~<br>~~V1 +VE~~<br>~~Pin 4,5,6~~<br>~~V1 -VE~~||
||~~J3~~<br>~~Pin 1~~<br>~~FAN +VE~~<br>~~Pin 2~~<br>~~FAN -VE~~||
|~~**55**~~|~~J4~~<br>~~Pin 1~~<br>~~Vs~~<br>~~(For PGPF Option Only)~~<br>~~Pin 2~~<br>~~PGPF~~<br>~~Pin 3~~<br>~~GND~~||
||||
|~~4EM-20-343~~|~~3~~|~~39-DE60-44950-002 / A7~~|
## Notes
1. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
2. For Class II version Enquire with EOS Sales Rep before Order.
3. Combined output power of main output, fan supply shall not exceed max. Power rating.
4. Fan supply output voltage tolerance including set point accuracy, line and load regulation is +/-10% and Ripple and noise is less than 10%.
5. Specifications are for nominal input voltage, 25°C unless otherwise stated.
6. 180W with 13CFM forced air cooling and 120W with natural convection cooling at 100 to 264VAC.
7. Output ripple can be more than 10% of the output voltage.
8. Fusing on neutral for ITE model is optional.
9. Adjustment potentiometer is located on the SMT side of the PCB.
10. When used in Cover Kit, de-rate output power to 70 % under all operating conditions
11. A TTL signal is available at pin 2 of J4 which goes high 100-500mS after output voltage reaches 90% of set value.
- It goes low a minimum of 1mS before output falls below 90% of the set value, when input AC is switched off.
12. Add suffix “S1” to get model number with Input connector – Screw terminal and Output Connector – Screw Terminal. e.g. ULP180-1012-S1 (Without PGPF)
13. Add suffix “S2” to get model number with Input connector – Right Angle Type and Output Connector – Right Angle Type. e.g. ULP180-1012-S2 (Without PGPF)
14. Add suffix “S1” to get model number with Input connector – Screw terminal and Output Connector – Screw Terminal. e.g. ULP180-0012-S1 (With PGPF)
15. Add suffix “S2” to get model number with Input connector – Right Angle Type and Output Connector – Right Angle Type. e.g. ULP180-0012-S2 (With PGPF)
**==> picture [147 x 13] intentionally omitted <==**
**----- Start of picture text -----**<br>
Power good / AC fail signal specs<br>**----- End of picture text -----**<br>
4EM-20-343 4 39-DE60-44950-002 / A7
|AC Input Connector (J1) Option 1<br>Molex: 26-60-4030<br> (Molex Connector @ I/P)<br>Mating: 09-50-3031;Pins: 08-50-0106<br>~~=~~|~~=~~|
|---|---|
|AC Input Connector (J1) Option 2 Molex: 39357 Series or equivalent<br> (Screw Terminal @ I/P)<br>~~=~~|~~=~~|
|DC Output Connector (J2) Option 1<br>Molex: 26-60-4060<br> (Molex Connector @ O/P)<br>Mating: 09-50-3061;Pins: 08-50-0106<br>~~=~~|~~=~~|
|DC Output Connector (J2) Option 2 Molex: 39357 Series or equivalent<br> (Screw Terminal @ O/P)<br>~~=~~|~~=~~|
|AC Input Connector (J1) Option 3<br>TE Connectivity: 647676-3<br> (Right Angle Type @ I/P)<br>Mating: 1-1123722-3;Crimp: 1123721-2<br>~~=~~|~~=~~|
|DC Output Connector (J2) Option 3<br>TE Connectivity: 647676-6<br> (Molex Connector @ O/P)<br>Mating: 1-1123722-6;Crimp: 1123721-2<br>~~=~~|~~=~~|
|Aux (Fan) Output(J3)<br>AMP :640456-2<br>Mating: 640440-2<br>~~=~~|~~=~~|
|Signal Output (J4)<br>AMP :640456-3<br>Mating: 640440-3<br>~~=~~|~~=~~|
|Dimensions<br>4 x 2 x 0.75 inches<br> (101.60 x 50.8x 19.05 mm)<br>~~=~~|~~=~~|
|Weight<br>200gm approx<br>~~=~~|~~=~~|
|EMC<br>~~=~~|~~=~~|
|Parameter<br> Conditions/Description<br> Criteria<br>~~=~~|~~=~~|
|Conducted Emissions<br>EN55032-B, CISPR22-B, FCC PART15-B<br>Pass<br>~~=~~|~~=~~|
|Radiated Emissions<br>EN 55032 A<br>Pass<br>Level B with external core (King core K5B<br>RC25x12x15-M in input cable)<br>~~=~~|~~=~~|
|Input Current Harmonics<br>EN 61000-3-2<br>Class D<br>~~=~~|~~=~~|
|Voltage Fluctuation and Flicker<br>EN 61000-3-3<br>Pass<br>~~=~~|~~=~~|
|ESD Immunity<br>EN 61000-4-2<br>Level 3, Criterion A<br>~~=~~|~~=~~|
|Radiated Field Immunity<br>EN 61000-4-3<br>Level 3,Criterion A<br>~~=~~|~~=~~|
|Electrical Fast Transient Immunity<br>EN 61000-4-4<br>Level 3, Criterion A<br>~~=~~|~~=~~|
|Surge Immunity<br>EN 61000-4-5<br>Level 3,Criterion A<br>~~=~~|~~=~~|
|Conducted Immunity<br>EN61000-4-6<br>Level3, Criterion A<br>~~=~~|~~=~~|
|Magnetic Field Immunity<br>EN 61000-4-8<br>Level 3, Criterion A<br>~~=~~|~~=~~|
|Voltage dips, interruptions<br>EN 61000-4-11<br>Criterion A & B~~=~~||
|Safety<br>~~=~~|~~=~~|
|CE Mark<br>Complies with LVD Directive<br>~~=~~|~~=~~|
|Approval Agency<br>Nemko, UL, C-UL<br>~~=~~|~~=~~|
|SafetyStandard(s)<br>EN/IEC/UL 62368-1(Ed .3)<br>~~=~~|~~=~~|
**==> picture [319 x 186] intentionally omitted <==**
**----- Start of picture text -----**<br>
Derating Curve<br>Convection load: 120W up to 40 °C<br>De-rate between 40-50 °C @ 0.625% per °C<br>De-rate above 50 °C @ 2.33% per °C<br>@ Forced air<br>Forced air cooled load : 180W up to 50°C<br>Hf Convection<br>De-rate above 50 °C @ 2.5% per °C<br>**----- End of picture text -----**<br>
4EM-20-343 6 39-DE60-44950-002 / A7
## Mechanical Drawing
Input connector – Header Molex and Output Connector – Screw Terminal (Without PGPF)
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following
1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
## Mechanical Drawing
Input connector – Header Molex and Output Connector – Screw Terminal. (With PGPF)
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following
1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
Innovations in Power 39-DE60-44950-002 / A7
4EM-20-343
7
## Mechanical Drawing
Input connector – Header Molex and Output Connector – Header Molex. (Without PGPF)
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following
1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
## Mechanical Drawing
Input connector – Header Molex and Output Connector – Header Molex. (With PGPF)
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following 1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
4EM-20-343 8 39-DE60-44950-002 / A7
## Mechanical Drawing
Input connector – Screw terminal and Output Connector – Screw Terminal. (Without PGPF)
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following
1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
## Mechanical Drawing
Input connector – Screw terminal and Output Connector – Screw Terminal. (With PGPF)
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following
1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
4EM-20-343 9 39-DE60-44950-002 / A7
Innovations in Power
## Mechanical Drawing
**==> picture [380 x 12] intentionally omitted <==**
**----- Start of picture text -----**<br>
Input connector – Right Angle Type and Output Connector – Right Angle (Without PGPF)<br>**----- End of picture text -----**<br>
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following 1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
## Mechanical Drawing
Input connector – Right Angle Type and Output Connector – Right Angle (With PGPF) 4.00 [101.60] 3.75 +0.008 [95.25 +0.2] 0.125[3.175] DIRECTION OF AIRFLOW RECOMMENDED FAN SIZE conneononEARTH {} U of~+=| 0.375 [9.53 0.094COMPONENTHEIGHT[2.4]BELOW g/ bes’coe i |p1 ran “$5 | H 2 14044 wv ' 5 “roo rp Oo | a (1 co p H = H 8 (1 = } =| 8 | j= {J l= oo —s re) H a (1 oo bo) & | a | hn 3 Shi a N | Ber (es = / | 0.593 [15.05] COMPONENT MOUNTING HOLES eos ABOVE|,75 [19.05] DIA 0.138 [3.50] 4—PLS MECHANICAL OUTLINE DIMENSIONS ALL DIMENSIONS ARE IN INCHES[MM] GEN TOLERANCE : +/-0.04[+/—1.0MM] MPN FOR INPUT CONNECTOR: 647676—3 MPN FOR OUTPUT CONNECTOR: 647676—6 Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following 1. Stand off, used to mount PCB has OD of 5.4 mm max. 2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
4EM-20-343 10 39-DE60-44950-002 / A7
## Mechanical Drawing
Innovations in Power 11 39-DE60-44950-002 / A7
4EM-20-343
## Mechanical Drawing
4EM-20-343
13 39-DE60-44950-002 / A7
Mechanical Drawing
**65** Innovations in Power 14 39-DE60-44950-002 / A7
4EM-20-343
Mechanical Drawing
4EM-20-343
15 39-DE60-44950-002 / A7
Updated at April 22, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →