UKZ1H470MPM1TD

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UKZ** 

Premium Grade Type, For Audio Equipment 

Premium grade “nichicon MUSE” acoustic series. 

- Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. 

Compliant to the RoHS directive (2011/65/EU). 

## **UKZ** 

**==> picture [54 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
High Grade UFG<br>**----- End of picture text -----**<br>


## Specifications 

|Item|Performance Characteristics|
|---|---|
|Category Temperature Range|–40 to +85°C|
|Rated Voltage Range|25 to 100V|
|Rated Capacitance Range|10 to 1000µF|
|Capacitance Tolerance|± 20% at 120Hz,20°C|
|Leakage Current|After 1 minute's application of rated voltage at 20°C, leakage current is 0.01CV or less.|
|Tangent of loss angle (tanδ)|tanδ(MAX.)<br>Rated voltage(V)<br>25<br>0.12<br>50<br>0.08<br>100<br>0.07<br>Measurement frequency : 120Hz at 20°C|
|Stability at Low Temperature|Measurement frequency : 120Hz<br>Z–25°C / Z+20°C<br>Z–40°C / Z+20°C<br>Rated voltage(V)<br>Impedance ratio<br>ZT / Z20 (MAX.)<br>25<br>2<br>4<br>50<br>2<br>3<br>100<br>2<br>3|
|Endurance|The specifications listed at right shall be met<br>when the capacitors are restored to 20°C after<br>the rated voltage is applied for 1000 hours at<br>85°C.<br>Capacitance change<br>Leakage Current<br>tanδ<br>Within ±20% of the initial capacitance value<br>150% or  lessthan theinitialspecifiedvalue<br>Less than or equal to the initial specified value|
|Shelf Life|After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4<br>clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.|
|Marking|Printed with gold color letter on black sleeve.|



## Radial Lead Type 

Type numbering system (Example : 25V 100µF) 

**==> picture [504 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sleeve (P.E.T.) φ 0.8 tinned copper wire 1 2 3 4 5 6 7 8 9 10 11<br>U K Z 1 E 1 0 1 M P M<br>Configuration<br>~; Capacitance tolerance  (±20%)  φD Code<br>8 · 10 PM<br>Rated capacitance (100µF)  12.5 to 18 HM<br>Pressurerelief vent Rated voltage (25V)<br>L [+    ] a [MAX.] 15 [MIN] 4 [MIN]<br>Series name<br>(mm) Type<br>(φD < 10) 1.0 φD 8 10 12.5 16 18<br>| α  Fe[|  (φD 10) 1.5 P 3.5 5.0 5.0 7.5 7.5<br>0.5MAX. 0.5<br>D+φ P±<br>**----- End of picture text -----**<br>


• Please refer to page 20 about the end seal configuration. 

## Dimensions 

|Dimensions<br>φD × L (mm)<br>a|
|---|
|**25**<br>**50**<br>**100**<br>1E<br>1H<br>2A<br>8× 11.5<br>**10**<br>100<br>V<br>Code<br>Cap.(µF)<br>a ~~ee~~<br>~~ee~~<br>~~sn~~|
|8× 11.5<br>8× 11.5<br>10× 12.5<br>10× 16<br>10× 20<br>**22**<br>220<br>**33**<br>330<br>~~aGC~~|
|10× 12.5<br>10× 16<br>12.5× 20<br>**47**<br>470<br>~~se~~|
|10× 16<br>12.5× 20<br>16× 25<br>**1000**<br>101<br>~~se~~|
|12.5× 20<br>16× 25<br>16× 35.5<br>**2200**<br>221<br>~~ss~~|
|12.5× 25<br>16× 25<br>16×35.5<br>16× 31.5<br>16× 35.5<br>18×40<br>18×35.5<br>**3300**<br>**4700**<br>**100000**<br>331<br>471<br>102<br>~~apo~~<br>~~Po~~|



Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 

270