Image not available
Illustrative purposes only
UHP-500-36
AC/DC Enclosed Power Supply (PSU), ITE & Household, 1 Outputs, 500.4 W, 36 VDC, 13.9 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC Enclosed Power Supplies
- No. of Outputs:1Outputs; Output Power Max:500.4W; Output Voltage - Output 1:36V; Output Current - Output 1:13.9A; Output Voltage - Output 2:-; Output Current - Output 2:-; Output Voltage
- SVHC: No SVHC (25-Jun-2025)
- Product Range: UHP-500 Series
- No. of Outputs: 1Outputs
- Output Power Max: 500.4W
- Input Voltage VAC: 90V AC to 264V AC
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 13.9A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Current - Output 4: -
- Output Voltage - Output 1: 36VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE & Household
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 102.49 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## 500W Slim Type with PFC Switching Supply ## **UHP - 500 series** **==> picture [170 x 44] intentionally omitted <==** **----- Start of picture text -----**<br> S&E BauarSicherheitbeegelodwacmat geprufto ges g<br>www.ID 2000000000tuv.com<br>GB4943 UL60950 1- EN60950-1 IEC60950-1<br>■<br>**----- End of picture text -----**<br> 150 % - 20 ~+ 70 ℃ **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> Industrial automation machinery Industrial control system Mechanical and electrical equipment Electronic instruments, equipments or apparatus LED display application ## ■ UHP-500 series is a 500W single-output slim type power supply with 31mm of low profile design. Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 4.2V, 5V, 12V, 15V, 24V, 36V and 48V. In addition to the high efficiency up to 95%, that the whole series operates from -20℃ ~ 70℃ under air convection without fan. UHP-500 has the complete protection functions and 5G anti-vibration capability；It is complied with the international safety regulations such as TUV EN60950-1, UL60950-1 and GB4943. UHP-500 series serves as a high performance power supply solution for various industrial applications. ## ■ **==> picture [54 x 13] intentionally omitted <==** **----- Start of picture text -----**<br> |__| R<br>**----- End of picture text -----**<br> _File Name:UHP-500-SPEC 2018-01-16_ **UHP - 500 series** 500W Slim Type with PFC Switching Supply ## **SPECIFICATION** |3.6~4.4V<br>**VOLTAGE ADJ. RANGE**<br>110~140% rated output power<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE Note.4**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC<br>Cold start 30A/115VAC 60A/230VAC<br><0.75mA / 240VAC<br>4.62 ~ 5.46V<br>-20 ~ +70<br>(Refer to “Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃)<br>0.03%/<br>(0 ~ 50<br>10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes<br>168K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>PF<br>0.95/230VAC PF<br>0.98/115VAC at full load<br>≥<br>≥<br>12ms/230VAC 12ms/115VAC<br>89%<br>±1.0%<br>±0.5%<br>±2.0%<br>200mVp-p<br>4.2V<br>**UHP-500 -4.2**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>ncludes set up tolerance,<br>derating curve<br>℃<br>**ENVIRONMENT**<br>**PROTECTION**<br>95%<br>232*81*31mm (L*W*H)<br>Protection type :Shut down O/P voltage,re-power on to recover<br>Protection type :Shut down O/P voltage, recovers automatically after temperature goes down<br>4.85A/115VAC 2.6A/230VAC<br>**RATED POWER(convection)**<br>0.905kg; 16pcs/15.48kg/0.82CUFT<br>47 ~ 63Hz<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>94%<br>4.5~5.5V<br>±1.0%<br>±0.5%<br>±2.0%<br>200mVp-p<br>5V<br>11.4~12.6V<br>±0.5%<br>±0.3%<br>±1.0%<br>200mVp-p<br>12V<br>14.3~15.8V<br>200mVp-p<br>15V<br>22.8~25.2V<br>240mVp-p<br>24V<br>34.2~37.8V<br>360mVp-p<br>36V<br>45.6~50.4V<br>360mVp-p<br>48V<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>94%<br>94.5%<br>95%<br>90%<br>39.6 ~46.8V<br>13.2 ~ 15.6V<br>5.75 ~ 6.75V<br>16.5 ~ 19.5V<br>26.4 ~ 31.2V<br>52.8 ~ 62.4V<br>**UHP-500 -5**<br>**UHP-500 -12 UHP-500 -15 UHP-500 -24 UHP-500 -36 UHP-500 -48**<br>**FUNCTION**<br>**REDUNDANT(Optional)**<br>Contact rating(max.):30Vdc/1A resistive load<br>For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be<br>automatically enabled. This can prevent the system crash, and provide the reliability of system<br>**DC OK SIGNAL(Optional)**<br>**SAFETY STANDARDS**<br>**EMC EMISSION**<br>**EMC IMMUNITY**<br>Compliance to EN55032,GB/T9254,Class B, EN61000-3-2,-3, EAC TP TC 020<br>**SAFETY &**<br>**EMC**<br>**(Note.6)**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC<br>I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>Compliance to EN61000-4-2,3,4,5,6,8,11;EN61000-6-2 (EN50082-2), heavy industry level ,criterial A,EAC TP TC 020<br>UL60950-1,TUV EN60950-1, CCC GB4943, EAC TP TC 004 approved;Design refer to EN60335-1,EN61558-2-16<br>80A<br>336W<br>80A<br>400W<br>41.7A<br>500.4W<br>33.4A<br>501W<br>20.9A<br>501.6W<br>13.9A<br>500.4W<br>501.6W<br>10.45A<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the<br>for more details.<br>5.The ambient temperature derating of 3.5<br>/1000m is needed for operating altitude greater than 2000m(6500ft)<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed<br>that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power<br>supplies.” (as available on http:/Awww.meanwell.com)|3.6~4.4V<br>**VOLTAGE ADJ. RANGE**<br>110~140% rated output power<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE Note.4**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC<br>Cold start 30A/115VAC 60A/230VAC<br><0.75mA / 240VAC<br>4.62 ~ 5.46V<br>-20 ~ +70<br>(Refer to “Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃)<br>0.03%/<br>(0 ~ 50<br>10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes<br>168K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>PF<br>0.95/230VAC PF<br>0.98/115VAC at full load<br>≥<br>≥<br>12ms/230VAC 12ms/115VAC<br>89%<br>±1.0%<br>±0.5%<br>±2.0%<br>200mVp-p<br>4.2V<br>**UHP-500 -4.2**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>ncludes set up tolerance,<br>derating curve<br>℃<br>**ENVIRONMENT**<br>**PROTECTION**<br>95%<br>232*81*31mm (L*W*H)<br>Protection type :Shut down O/P voltage,re-power on to recover<br>Protection type :Shut down O/P voltage, recovers automatically after temperature goes down<br>4.85A/115VAC 2.6A/230VAC<br>**RATED POWER(convection)**<br>0.905kg; 16pcs/15.48kg/0.82CUFT<br>47 ~ 63Hz<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>94%<br>4.5~5.5V<br>±1.0%<br>±0.5%<br>±2.0%<br>200mVp-p<br>5V<br>11.4~12.6V<br>±0.5%<br>±0.3%<br>±1.0%<br>200mVp-p<br>12V<br>14.3~15.8V<br>200mVp-p<br>15V<br>22.8~25.2V<br>240mVp-p<br>24V<br>34.2~37.8V<br>360mVp-p<br>36V<br>45.6~50.4V<br>360mVp-p<br>48V<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>94%<br>94.5%<br>95%<br>90%<br>39.6 ~46.8V<br>13.2 ~ 15.6V<br>5.75 ~ 6.75V<br>16.5 ~ 19.5V<br>26.4 ~ 31.2V<br>52.8 ~ 62.4V<br>**UHP-500 -5**<br>**UHP-500 -12 UHP-500 -15 UHP-500 -24 UHP-500 -36 UHP-500 -48**<br>**FUNCTION**<br>**REDUNDANT(Optional)**<br>Contact rating(max.):30Vdc/1A resistive load<br>For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be<br>automatically enabled. This can prevent the system crash, and provide the reliability of system<br>**DC OK SIGNAL(Optional)**<br>**SAFETY STANDARDS**<br>**EMC EMISSION**<br>**EMC IMMUNITY**<br>Compliance to EN55032,GB/T9254,Class B, EN61000-3-2,-3, EAC TP TC 020<br>**SAFETY &**<br>**EMC**<br>**(Note.6)**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC<br>I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>Compliance to EN61000-4-2,3,4,5,6,8,11;EN61000-6-2 (EN50082-2), heavy industry level ,criterial A,EAC TP TC 020<br>UL60950-1,TUV EN60950-1, CCC GB4943, EAC TP TC 004 approved;Design refer to EN60335-1,EN61558-2-16<br>80A<br>336W<br>80A<br>400W<br>41.7A<br>500.4W<br>33.4A<br>501W<br>20.9A<br>501.6W<br>13.9A<br>500.4W<br>501.6W<br>10.45A<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the<br>for more details.<br>5.The ambient temperature derating of 3.5<br>/1000m is needed for operating altitude greater than 2000m(6500ft)<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed<br>that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power<br>supplies.” (as available on http:/Awww.meanwell.com)|**UHP-500 -4.2**|**UHP-500 -5**|**UHP-500 -12 **|**UHP-500 -15 **|**UHP-500 -24 **|**UHP-500 -36 UHP-500 -48**|**UHP-500 -36 UHP-500 -48**| |---|---|---|---|---|---|---|---|---| ||**DC VOLTAGE**|4.2V|5V|12V|15V|24V|36V|48V| ||**RATED CURRENT**|80A|80A|41.7A|33.4A|20.9A|13.9A|10.45A| ||**RATED POWER(convection)**|336W|400W|500.4W|501W|501.6W|500.4W|501.6W| ||**RIPPLE & NOISE (max.) Note.2**|200mVp-p|200mVp-p|200mVp-p|200mVp-p|240mVp-p|360mVp-p|360mVp-p| ||**VOLTAGE ADJ. RANGE**|3.6~4.4V|4.5~5.5V|11.4~12.6V|14.3~15.8V|22.8~25.2V|34.2~37.8V|45.6~50.4V| ||**VOLTAGE TOLERANCE Note.3**|±2.0%|±2.0%|±1.0%|±1.0%|±1.0%|±1.0%|±1.0%| ||**LINE REGULATION**|±0.5%|±0.5%|±0.3%|±0.3%|±0.3%|±0.3%|±0.3%| ||**LOAD REGULATION**|±1.0%|±1.0%|±0.5%|±0.5%|±0.5%|±0.5%|±0.5%| ||**SETUP, RISE TIME**|1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load||||||| ||**HOLD UP TIME (Typ.)**|12ms/230VAC 12ms/115VAC||||||| ||**VOLTAGE RANGE Note.4**|90 ~ 264VAC 127 ~ 370VDC||||||| ||**FREQUENCY RANGE**|47 ~ 63Hz||||||| ||**POWER FACTOR (Typ.)**|PF<br>0.95/230VAC PF<br>0.98/115VAC at full load<br>≥<br>≥||||||| ||**EFFICIENCY (Typ.)**|89%|90%|94%|94%|94.5%|95%|95%| ||**AC CURRENT (Typ.)**|4.85A/115VAC 2.6A/230VAC||||||| ||**INRUSH CURRENT (Typ.)**|Cold start 30A/115VAC 60A/230VAC||||||| ||**LEAKAGE CURRENT**|<0.75mA / 240VAC||||||| ||**OVERLOAD**|110~140% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed||||||| ||**OVER VOLTAGE**|4.62 ~ 5.46V<br>Protection type :Shut down O/P voltage,re-power on to recover<br>39.6 ~46.8V<br>13.2 ~ 15.6V<br>5.75 ~ 6.75V<br>16.5 ~ 19.5V<br>26.4 ~ 31.2V<br>52.8 ~ 62.4V||||||| ||**OVER TEMPERATURE**|Protection type :Shut down O/P voltage, recovers automatically after temperature goes down||||||| ||**DC OK SIGNAL(Optional)**|Contact rating(max.):30Vdc/1A resistive load||||||| ||**REDUNDANT(Optional)**|For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be<br>automatically enabled. This can prevent the system crash, and provide the reliability of system||||||| ||**WORKING TEMP.**|-20 ~ +70<br>(Refer to “Derating Curve")<br>℃||||||| ||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing||||||| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃||||||| ||**TEMP. COEFFICIENT**|±<br>℃<br>℃)<br>0.03%/<br>(0 ~ 50||||||| ||**VIBRATION**|10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes||||||| ||**SAFETY STANDARDS**|UL60950-1,TUV EN60950-1, CCC GB4943, EAC TP TC 004 approved;Design refer to EN60335-1,EN61558-2-16||||||| ||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC||||||| ||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25<br>/ 70%RH<br>℃||||||| ||**EMC EMISSION**|Compliance to EN55032,GB/T9254,Class B, EN61000-3-2,-3, EAC TP TC 020||||||| ||**EMC IMMUNITY**|Compliance to EN61000-4-2,3,4,5,6,8,11;EN61000-6-2 (EN50082-2), heavy industry level ,criterial A,EAC TP TC 020||||||| ||**MTBF**|168K hrs min. MIL-HDBK-217F (25<br>)<br>℃||||||| ||**DIMENSION**|232*81*31mm (L*W*H)||||||| ||**PACKING**|0.905kg; 16pcs/15.48kg/0.82CUFT||||||| ||℃<br>ncludes set up tolerance,<br>derating curve<br>℃<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the<br>for more details.<br>5.The ambient temperature derating of 3.5<br>/1000m is needed for operating altitude greater than 2000m(6500ft)<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed<br>that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power<br>supplies.” (as available on http:/Awww.meanwell.com)|||||||| _File Name:UHP-500-SPEC 2018-01-16_ **UHP - 500 series** ## 500W Slim Type with PFC Switching Supply ## **Block Diagram** **==> picture [485 x 568] intentionally omitted <==** **----- Start of picture text -----**<br> I/P EMI FILTER& PFC SWITCH-POWER RECTIFIERS& +V<br>RECTIFIER CIRCUIT ING FILTER -V<br>FG DETECTION<br>CIRCUIT<br>O.T.P. O.L.P.<br>CONTROL<br>O.V.P.<br>DC OK Function<br>Redundant Function<br>Derating Curve<br>12V,15V 230Vac for 12V,15V<br>100 others 100 230Vac for other<br>90<br>230Vac for 4.2V,5V<br>80 4.2V,5V 80 110Vac for other<br>70<br>60 60 110Vac for 4.2V,5V<br>50<br>40 40<br>20 20<br>-20 0 10 20 30 40 45 50 60 70 (HORIZONTAL) -20 0 10 20 30 40 45 50 60 70 (HORIZONTAL)<br>AMBIENT TEMPERATURE ( ℃ ) AMBIENT TEMPERATURE WITHOUT ALUMINUM PLATE( ℃ )<br>100<br>80<br>60<br>40<br>20<br>-30 0 10 20 30 40 50 60 70 80 90 (HORIZONTAL)<br>Tcase ( ℃ )<br> (%)<br>RATED CURRENT RATED CURRENT (%)<br>RATED CURRENT (%)<br>**----- End of picture text -----**<br> _File Name:UHP-500-SPEC 2018-01-16_ **UHP - 500 series** 500W Slim Type with PFC Switching Supply ## **STATIC CHARACTERISTIC** **==> picture [195 x 146] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>90<br>80<br>70<br>60<br>50<br>40<br>90 100 110 120 140 160 180 200 220 240 264<br>INPUT VOLTAGE (V) 60Hz<br>LOAD (%)<br>**----- End of picture text -----**<br> ## **DC OK Relay Contact** |Contact Close|PSU turns on/DC ok| |---|---| |Contact Open|PSU turns off/DC fail| |Contact Rating(max.)|30Vdc/1A resistive load| ## **Redundant function** (1) UHP-500R is built-in redundant function and can be connected 2 units in parallel . (2) When in parallel operation the maximum load should not be greater than the rated power of any PSU. **==> picture [159 x 72] intentionally omitted <==** **----- Start of picture text -----**<br> +V<br>+V<br>PSU -V -V LOAD<br>+V<br>PSU -V<br>**----- End of picture text -----**<br> _File Name:UHP-500-SPEC 2018-01-16_ ## 500W Slim Type with PFC Switching Supply ## **UHP - 500 series** **==> picture [494 x 371] intentionally omitted <==** **----- Start of picture text -----**<br> Mechanical Specification CASE NO.:233D Unit:mm<br>232.0<br>226.0 3<br>1<br>3 2<br>2<br>3<br>1 4<br>VR<br>56.75<br>116<br>tc<br>�tc : Max. Case Temperature<br>R2.1<br>31<br>12.75<br>9<br>63 81<br>15.5<br>1<br>2<br>**----- End of picture text -----**<br> **==> picture [451 x 105] intentionally omitted <==** **----- Start of picture text -----**<br> AC Input Terminal(TB1) pin NO. Assignment<br>DC Output Terminal(TB2,TB3) pin NO. Assignment<br>Pin No. Assignment Terminal Max mounting torque Pin No. Assignment Terminal Max mounting torque<br>1 AC/L<br>2 AC/N DG28C(DEGSON)-B-03P 5Kgf-cm 13,4,2 +V-V MEL-400-02P(MW) 8Kgf-cm<br>3<br>DC OK Connector(CN1):JST B2B-PH-K-S or requivalent<br>Pin No. Assignment Mating Housing Terminal<br>1 DC COM1 JST PHR-2 JST SPH-002T-P0.5S<br>2 DC COM2 or requivalent or requivalent<br>**----- End of picture text -----**<br> _File Name:UHP-500-SPEC 2018-01-16_ **UHP - 500 series** ## 500W Slim Type with PFC Switching Supply **==> picture [511 x 668] intentionally omitted <==** **----- Start of picture text -----**<br> Installation<br>1.Operate with additional aluminum plate<br>In order to meet the“Derating Curve”and the “Static Characteristics” ,UHP-500 series must be installed onto an aluminum plate(or the cabinet of the same size)<br>on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and<br>smooth surface (or coated with thermal grease), and UHP-500 series must be firmly mounted at the center of the aluminum plate.<br>unit:mm<br>M3*4<br>450<br>450<br>3<br>**----- End of picture text -----**<br> _File Name:UHP-500-SPEC 2018-01-16_
Updated at June 6, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →